1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*******************************************************************************
3 *
4 * Intel Ethernet Controller XL710 Family Linux Virtual Function Driver
5 * Copyright(c) 2013 - 2014 Intel Corporation.
6 *
7 * Contact Information:
8 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
9 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
10 *
11 ******************************************************************************/
12
13 #ifndef _VIRTCHNL_H_
14 #define _VIRTCHNL_H_
15
16 /* Description:
17 * This header file describes the VF-PF communication protocol used
18 * by the drivers for all devices starting from our 40G product line
19 *
20 * Admin queue buffer usage:
21 * desc->opcode is always aqc_opc_send_msg_to_pf
22 * flags, retval, datalen, and data addr are all used normally.
23 * The Firmware copies the cookie fields when sending messages between the
24 * PF and VF, but uses all other fields internally. Due to this limitation,
25 * we must send all messages as "indirect", i.e. using an external buffer.
26 *
27 * All the VSI indexes are relative to the VF. Each VF can have maximum of
28 * three VSIs. All the queue indexes are relative to the VSI. Each VF can
29 * have a maximum of sixteen queues for all of its VSIs.
30 *
31 * The PF is required to return a status code in v_retval for all messages
32 * except RESET_VF, which does not require any response. The return value
33 * is of status_code type, defined in the shared type.h.
34 *
35 * In general, VF driver initialization should roughly follow the order of
36 * these opcodes. The VF driver must first validate the API version of the
37 * PF driver, then request a reset, then get resources, then configure
38 * queues and interrupts. After these operations are complete, the VF
39 * driver may start its queues, optionally add MAC and VLAN filters, and
40 * process traffic.
41 */
42
43 /* START GENERIC DEFINES
44 * Need to ensure the following enums and defines hold the same meaning and
45 * value in current and future projects
46 */
47
48 /* Error Codes */
49 enum virtchnl_status_code {
50 VIRTCHNL_STATUS_SUCCESS = 0,
51 VIRTCHNL_STATUS_ERR_PARAM = -5,
52 VIRTCHNL_STATUS_ERR_NO_MEMORY = -18,
53 VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH = -38,
54 VIRTCHNL_STATUS_ERR_CQP_COMPL_ERROR = -39,
55 VIRTCHNL_STATUS_ERR_INVALID_VF_ID = -40,
56 VIRTCHNL_STATUS_ERR_ADMIN_QUEUE_ERROR = -53,
57 VIRTCHNL_STATUS_ERR_NOT_SUPPORTED = -64,
58 };
59
60 /* Backward compatibility */
61 #define VIRTCHNL_ERR_PARAM VIRTCHNL_STATUS_ERR_PARAM
62 #define VIRTCHNL_STATUS_NOT_SUPPORTED VIRTCHNL_STATUS_ERR_NOT_SUPPORTED
63
64 #define VIRTCHNL_LINK_SPEED_2_5GB_SHIFT 0x0
65 #define VIRTCHNL_LINK_SPEED_100MB_SHIFT 0x1
66 #define VIRTCHNL_LINK_SPEED_1000MB_SHIFT 0x2
67 #define VIRTCHNL_LINK_SPEED_10GB_SHIFT 0x3
68 #define VIRTCHNL_LINK_SPEED_40GB_SHIFT 0x4
69 #define VIRTCHNL_LINK_SPEED_20GB_SHIFT 0x5
70 #define VIRTCHNL_LINK_SPEED_25GB_SHIFT 0x6
71 #define VIRTCHNL_LINK_SPEED_5GB_SHIFT 0x7
72
73 enum virtchnl_link_speed {
74 VIRTCHNL_LINK_SPEED_UNKNOWN = 0,
75 VIRTCHNL_LINK_SPEED_100MB = BIT(VIRTCHNL_LINK_SPEED_100MB_SHIFT),
76 VIRTCHNL_LINK_SPEED_1GB = BIT(VIRTCHNL_LINK_SPEED_1000MB_SHIFT),
77 VIRTCHNL_LINK_SPEED_10GB = BIT(VIRTCHNL_LINK_SPEED_10GB_SHIFT),
78 VIRTCHNL_LINK_SPEED_40GB = BIT(VIRTCHNL_LINK_SPEED_40GB_SHIFT),
79 VIRTCHNL_LINK_SPEED_20GB = BIT(VIRTCHNL_LINK_SPEED_20GB_SHIFT),
80 VIRTCHNL_LINK_SPEED_25GB = BIT(VIRTCHNL_LINK_SPEED_25GB_SHIFT),
81 VIRTCHNL_LINK_SPEED_2_5GB = BIT(VIRTCHNL_LINK_SPEED_2_5GB_SHIFT),
82 VIRTCHNL_LINK_SPEED_5GB = BIT(VIRTCHNL_LINK_SPEED_5GB_SHIFT),
83 };
84
85 /* for hsplit_0 field of Rx HMC context */
86 /* deprecated with AVF 1.0 */
87 enum virtchnl_rx_hsplit {
88 VIRTCHNL_RX_HSPLIT_NO_SPLIT = 0,
89 VIRTCHNL_RX_HSPLIT_SPLIT_L2 = 1,
90 VIRTCHNL_RX_HSPLIT_SPLIT_IP = 2,
91 VIRTCHNL_RX_HSPLIT_SPLIT_TCP_UDP = 4,
92 VIRTCHNL_RX_HSPLIT_SPLIT_SCTP = 8,
93 };
94
95 /* END GENERIC DEFINES */
96
97 /* Opcodes for VF-PF communication. These are placed in the v_opcode field
98 * of the virtchnl_msg structure.
99 */
100 enum virtchnl_ops {
101 /* The PF sends status change events to VFs using
102 * the VIRTCHNL_OP_EVENT opcode.
103 * VFs send requests to the PF using the other ops.
104 * Use of "advanced opcode" features must be negotiated as part of capabilities
105 * exchange and are not considered part of base mode feature set.
106 */
107 VIRTCHNL_OP_UNKNOWN = 0,
108 VIRTCHNL_OP_VERSION = 1, /* must ALWAYS be 1 */
109 VIRTCHNL_OP_RESET_VF = 2,
110 VIRTCHNL_OP_GET_VF_RESOURCES = 3,
111 VIRTCHNL_OP_CONFIG_TX_QUEUE = 4,
112 VIRTCHNL_OP_CONFIG_RX_QUEUE = 5,
113 VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6,
114 VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
115 VIRTCHNL_OP_ENABLE_QUEUES = 8,
116 VIRTCHNL_OP_DISABLE_QUEUES = 9,
117 VIRTCHNL_OP_ADD_ETH_ADDR = 10,
118 VIRTCHNL_OP_DEL_ETH_ADDR = 11,
119 VIRTCHNL_OP_ADD_VLAN = 12,
120 VIRTCHNL_OP_DEL_VLAN = 13,
121 VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,
122 VIRTCHNL_OP_GET_STATS = 15,
123 VIRTCHNL_OP_RSVD = 16,
124 VIRTCHNL_OP_EVENT = 17, /* must ALWAYS be 17 */
125 VIRTCHNL_OP_IWARP = 20, /* advanced opcode */
126 VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP = 21, /* advanced opcode */
127 VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP = 22, /* advanced opcode */
128 VIRTCHNL_OP_CONFIG_RSS_KEY = 23,
129 VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
130 VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
131 VIRTCHNL_OP_SET_RSS_HENA = 26,
132 VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
133 VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
134 VIRTCHNL_OP_REQUEST_QUEUES = 29,
135 VIRTCHNL_OP_ENABLE_CHANNELS = 30,
136 VIRTCHNL_OP_DISABLE_CHANNELS = 31,
137 VIRTCHNL_OP_ADD_CLOUD_FILTER = 32,
138 VIRTCHNL_OP_DEL_CLOUD_FILTER = 33,
139 };
140
141 /* These macros are used to generate compilation errors if a structure/union
142 * is not exactly the correct length. It gives a divide by zero error if the
143 * structure/union is not of the correct size, otherwise it creates an enum
144 * that is never used.
145 */
146 #define VIRTCHNL_CHECK_STRUCT_LEN(n, X) enum virtchnl_static_assert_enum_##X \
147 { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
148 #define VIRTCHNL_CHECK_UNION_LEN(n, X) enum virtchnl_static_asset_enum_##X \
149 { virtchnl_static_assert_##X = (n)/((sizeof(union X) == (n)) ? 1 : 0) }
150
151 /* Virtual channel message descriptor. This overlays the admin queue
152 * descriptor. All other data is passed in external buffers.
153 */
154
155 struct virtchnl_msg {
156 u8 pad[8]; /* AQ flags/opcode/len/retval fields */
157 enum virtchnl_ops v_opcode; /* avoid confusion with desc->opcode */
158 enum virtchnl_status_code v_retval; /* ditto for desc->retval */
159 u32 vfid; /* used by PF when sending to VF */
160 };
161
162 VIRTCHNL_CHECK_STRUCT_LEN(20, virtchnl_msg);
163
164 /* Message descriptions and data structures. */
165
166 /* VIRTCHNL_OP_VERSION
167 * VF posts its version number to the PF. PF responds with its version number
168 * in the same format, along with a return code.
169 * Reply from PF has its major/minor versions also in param0 and param1.
170 * If there is a major version mismatch, then the VF cannot operate.
171 * If there is a minor version mismatch, then the VF can operate but should
172 * add a warning to the system log.
173 *
174 * This enum element MUST always be specified as == 1, regardless of other
175 * changes in the API. The PF must always respond to this message without
176 * error regardless of version mismatch.
177 */
178 #define VIRTCHNL_VERSION_MAJOR 1
179 #define VIRTCHNL_VERSION_MINOR 1
180 #define VIRTCHNL_VERSION_MINOR_NO_VF_CAPS 0
181
182 struct virtchnl_version_info {
183 u32 major;
184 u32 minor;
185 };
186
187 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_version_info);
188
189 #define VF_IS_V10(_v) (((_v)->major == 1) && ((_v)->minor == 0))
190 #define VF_IS_V11(_ver) (((_ver)->major == 1) && ((_ver)->minor == 1))
191
192 /* VIRTCHNL_OP_RESET_VF
193 * VF sends this request to PF with no parameters
194 * PF does NOT respond! VF driver must delay then poll VFGEN_RSTAT register
195 * until reset completion is indicated. The admin queue must be reinitialized
196 * after this operation.
197 *
198 * When reset is complete, PF must ensure that all queues in all VSIs associated
199 * with the VF are stopped, all queue configurations in the HMC are set to 0,
200 * and all MAC and VLAN filters (except the default MAC address) on all VSIs
201 * are cleared.
202 */
203
204 /* VSI types that use VIRTCHNL interface for VF-PF communication. VSI_SRIOV
205 * vsi_type should always be 6 for backward compatibility. Add other fields
206 * as needed.
207 */
208 enum virtchnl_vsi_type {
209 VIRTCHNL_VSI_TYPE_INVALID = 0,
210 VIRTCHNL_VSI_SRIOV = 6,
211 };
212
213 /* VIRTCHNL_OP_GET_VF_RESOURCES
214 * Version 1.0 VF sends this request to PF with no parameters
215 * Version 1.1 VF sends this request to PF with u32 bitmap of its capabilities
216 * PF responds with an indirect message containing
217 * virtchnl_vf_resource and one or more
218 * virtchnl_vsi_resource structures.
219 */
220
221 struct virtchnl_vsi_resource {
222 u16 vsi_id;
223 u16 num_queue_pairs;
224 enum virtchnl_vsi_type vsi_type;
225 u16 qset_handle;
226 u8 default_mac_addr[ETH_ALEN];
227 };
228
229 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_vsi_resource);
230
231 /* VF capability flags
232 * VIRTCHNL_VF_OFFLOAD_L2 flag is inclusive of base mode L2 offloads including
233 * TX/RX Checksum offloading and TSO for non-tunnelled packets.
234 */
235 #define VIRTCHNL_VF_OFFLOAD_L2 0x00000001
236 #define VIRTCHNL_VF_OFFLOAD_IWARP 0x00000002
237 #define VIRTCHNL_VF_OFFLOAD_RSVD 0x00000004
238 #define VIRTCHNL_VF_OFFLOAD_RSS_AQ 0x00000008
239 #define VIRTCHNL_VF_OFFLOAD_RSS_REG 0x00000010
240 #define VIRTCHNL_VF_OFFLOAD_WB_ON_ITR 0x00000020
241 #define VIRTCHNL_VF_OFFLOAD_REQ_QUEUES 0x00000040
242 #define VIRTCHNL_VF_OFFLOAD_VLAN 0x00010000
243 #define VIRTCHNL_VF_OFFLOAD_RX_POLLING 0x00020000
244 #define VIRTCHNL_VF_OFFLOAD_RSS_PCTYPE_V2 0x00040000
245 #define VIRTCHNL_VF_OFFLOAD_RSS_PF 0X00080000
246 #define VIRTCHNL_VF_OFFLOAD_ENCAP 0X00100000
247 #define VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM 0X00200000
248 #define VIRTCHNL_VF_OFFLOAD_RX_ENCAP_CSUM 0X00400000
249 #define VIRTCHNL_VF_OFFLOAD_ADQ 0X00800000
250
251 /* Define below the capability flags that are not offloads */
252 #define VIRTCHNL_VF_CAP_ADV_LINK_SPEED 0x00000080
253 #define VF_BASE_MODE_OFFLOADS (VIRTCHNL_VF_OFFLOAD_L2 | \
254 VIRTCHNL_VF_OFFLOAD_VLAN | \
255 VIRTCHNL_VF_OFFLOAD_RSS_PF)
256
257 struct virtchnl_vf_resource {
258 u16 num_vsis;
259 u16 num_queue_pairs;
260 u16 max_vectors;
261 u16 max_mtu;
262
263 u32 vf_cap_flags;
264 u32 rss_key_size;
265 u32 rss_lut_size;
266
267 struct virtchnl_vsi_resource vsi_res[1];
268 };
269
270 VIRTCHNL_CHECK_STRUCT_LEN(36, virtchnl_vf_resource);
271
272 /* VIRTCHNL_OP_CONFIG_TX_QUEUE
273 * VF sends this message to set up parameters for one TX queue.
274 * External data buffer contains one instance of virtchnl_txq_info.
275 * PF configures requested queue and returns a status code.
276 */
277
278 /* Tx queue config info */
279 struct virtchnl_txq_info {
280 u16 vsi_id;
281 u16 queue_id;
282 u16 ring_len; /* number of descriptors, multiple of 8 */
283 u16 headwb_enabled; /* deprecated with AVF 1.0 */
284 u64 dma_ring_addr;
285 u64 dma_headwb_addr; /* deprecated with AVF 1.0 */
286 };
287
288 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_txq_info);
289
290 /* VIRTCHNL_OP_CONFIG_RX_QUEUE
291 * VF sends this message to set up parameters for one RX queue.
292 * External data buffer contains one instance of virtchnl_rxq_info.
293 * PF configures requested queue and returns a status code.
294 */
295
296 /* Rx queue config info */
297 struct virtchnl_rxq_info {
298 u16 vsi_id;
299 u16 queue_id;
300 u32 ring_len; /* number of descriptors, multiple of 32 */
301 u16 hdr_size;
302 u16 splithdr_enabled; /* deprecated with AVF 1.0 */
303 u32 databuffer_size;
304 u32 max_pkt_size;
305 u32 pad1;
306 u64 dma_ring_addr;
307 enum virtchnl_rx_hsplit rx_split_pos; /* deprecated with AVF 1.0 */
308 u32 pad2;
309 };
310
311 VIRTCHNL_CHECK_STRUCT_LEN(40, virtchnl_rxq_info);
312
313 /* VIRTCHNL_OP_CONFIG_VSI_QUEUES
314 * VF sends this message to set parameters for all active TX and RX queues
315 * associated with the specified VSI.
316 * PF configures queues and returns status.
317 * If the number of queues specified is greater than the number of queues
318 * associated with the VSI, an error is returned and no queues are configured.
319 */
320 struct virtchnl_queue_pair_info {
321 /* NOTE: vsi_id and queue_id should be identical for both queues. */
322 struct virtchnl_txq_info txq;
323 struct virtchnl_rxq_info rxq;
324 };
325
326 VIRTCHNL_CHECK_STRUCT_LEN(64, virtchnl_queue_pair_info);
327
328 struct virtchnl_vsi_queue_config_info {
329 u16 vsi_id;
330 u16 num_queue_pairs;
331 u32 pad;
332 struct virtchnl_queue_pair_info qpair[1];
333 };
334
335 VIRTCHNL_CHECK_STRUCT_LEN(72, virtchnl_vsi_queue_config_info);
336
337 /* VIRTCHNL_OP_REQUEST_QUEUES
338 * VF sends this message to request the PF to allocate additional queues to
339 * this VF. Each VF gets a guaranteed number of queues on init but asking for
340 * additional queues must be negotiated. This is a best effort request as it
341 * is possible the PF does not have enough queues left to support the request.
342 * If the PF cannot support the number requested it will respond with the
343 * maximum number it is able to support. If the request is successful, PF will
344 * then reset the VF to institute required changes.
345 */
346
347 /* VF resource request */
348 struct virtchnl_vf_res_request {
349 u16 num_queue_pairs;
350 };
351
352 /* VIRTCHNL_OP_CONFIG_IRQ_MAP
353 * VF uses this message to map vectors to queues.
354 * The rxq_map and txq_map fields are bitmaps used to indicate which queues
355 * are to be associated with the specified vector.
356 * The "other" causes are always mapped to vector 0.
357 * PF configures interrupt mapping and returns status.
358 */
359 struct virtchnl_vector_map {
360 u16 vsi_id;
361 u16 vector_id;
362 u16 rxq_map;
363 u16 txq_map;
364 u16 rxitr_idx;
365 u16 txitr_idx;
366 };
367
368 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_vector_map);
369
370 struct virtchnl_irq_map_info {
371 u16 num_vectors;
372 struct virtchnl_vector_map vecmap[1];
373 };
374
375 VIRTCHNL_CHECK_STRUCT_LEN(14, virtchnl_irq_map_info);
376
377 /* VIRTCHNL_OP_ENABLE_QUEUES
378 * VIRTCHNL_OP_DISABLE_QUEUES
379 * VF sends these message to enable or disable TX/RX queue pairs.
380 * The queues fields are bitmaps indicating which queues to act upon.
381 * (Currently, we only support 16 queues per VF, but we make the field
382 * u32 to allow for expansion.)
383 * PF performs requested action and returns status.
384 */
385 struct virtchnl_queue_select {
386 u16 vsi_id;
387 u16 pad;
388 u32 rx_queues;
389 u32 tx_queues;
390 };
391
392 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_queue_select);
393
394 /* VIRTCHNL_OP_ADD_ETH_ADDR
395 * VF sends this message in order to add one or more unicast or multicast
396 * address filters for the specified VSI.
397 * PF adds the filters and returns status.
398 */
399
400 /* VIRTCHNL_OP_DEL_ETH_ADDR
401 * VF sends this message in order to remove one or more unicast or multicast
402 * filters for the specified VSI.
403 * PF removes the filters and returns status.
404 */
405
406 struct virtchnl_ether_addr {
407 u8 addr[ETH_ALEN];
408 u8 pad[2];
409 };
410
411 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_ether_addr);
412
413 struct virtchnl_ether_addr_list {
414 u16 vsi_id;
415 u16 num_elements;
416 struct virtchnl_ether_addr list[1];
417 };
418
419 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_ether_addr_list);
420
421 /* VIRTCHNL_OP_ADD_VLAN
422 * VF sends this message to add one or more VLAN tag filters for receives.
423 * PF adds the filters and returns status.
424 * If a port VLAN is configured by the PF, this operation will return an
425 * error to the VF.
426 */
427
428 /* VIRTCHNL_OP_DEL_VLAN
429 * VF sends this message to remove one or more VLAN tag filters for receives.
430 * PF removes the filters and returns status.
431 * If a port VLAN is configured by the PF, this operation will return an
432 * error to the VF.
433 */
434
435 struct virtchnl_vlan_filter_list {
436 u16 vsi_id;
437 u16 num_elements;
438 u16 vlan_id[1];
439 };
440
441 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_vlan_filter_list);
442
443 /* VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE
444 * VF sends VSI id and flags.
445 * PF returns status code in retval.
446 * Note: we assume that broadcast accept mode is always enabled.
447 */
448 struct virtchnl_promisc_info {
449 u16 vsi_id;
450 u16 flags;
451 };
452
453 VIRTCHNL_CHECK_STRUCT_LEN(4, virtchnl_promisc_info);
454
455 #define FLAG_VF_UNICAST_PROMISC 0x00000001
456 #define FLAG_VF_MULTICAST_PROMISC 0x00000002
457
458 /* VIRTCHNL_OP_GET_STATS
459 * VF sends this message to request stats for the selected VSI. VF uses
460 * the virtchnl_queue_select struct to specify the VSI. The queue_id
461 * field is ignored by the PF.
462 *
463 * PF replies with struct eth_stats in an external buffer.
464 */
465
466 /* VIRTCHNL_OP_CONFIG_RSS_KEY
467 * VIRTCHNL_OP_CONFIG_RSS_LUT
468 * VF sends these messages to configure RSS. Only supported if both PF
469 * and VF drivers set the VIRTCHNL_VF_OFFLOAD_RSS_PF bit during
470 * configuration negotiation. If this is the case, then the RSS fields in
471 * the VF resource struct are valid.
472 * Both the key and LUT are initialized to 0 by the PF, meaning that
473 * RSS is effectively disabled until set up by the VF.
474 */
475 struct virtchnl_rss_key {
476 u16 vsi_id;
477 u16 key_len;
478 u8 key[1]; /* RSS hash key, packed bytes */
479 };
480
481 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_key);
482
483 struct virtchnl_rss_lut {
484 u16 vsi_id;
485 u16 lut_entries;
486 u8 lut[1]; /* RSS lookup table */
487 };
488
489 VIRTCHNL_CHECK_STRUCT_LEN(6, virtchnl_rss_lut);
490
491 /* VIRTCHNL_OP_GET_RSS_HENA_CAPS
492 * VIRTCHNL_OP_SET_RSS_HENA
493 * VF sends these messages to get and set the hash filter enable bits for RSS.
494 * By default, the PF sets these to all possible traffic types that the
495 * hardware supports. The VF can query this value if it wants to change the
496 * traffic types that are hashed by the hardware.
497 */
498 struct virtchnl_rss_hena {
499 u64 hena;
500 };
501
502 VIRTCHNL_CHECK_STRUCT_LEN(8, virtchnl_rss_hena);
503
504 /* VIRTCHNL_OP_ENABLE_CHANNELS
505 * VIRTCHNL_OP_DISABLE_CHANNELS
506 * VF sends these messages to enable or disable channels based on
507 * the user specified queue count and queue offset for each traffic class.
508 * This struct encompasses all the information that the PF needs from
509 * VF to create a channel.
510 */
511 struct virtchnl_channel_info {
512 u16 count; /* number of queues in a channel */
513 u16 offset; /* queues in a channel start from 'offset' */
514 u32 pad;
515 u64 max_tx_rate;
516 };
517
518 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_channel_info);
519
520 struct virtchnl_tc_info {
521 u32 num_tc;
522 u32 pad;
523 struct virtchnl_channel_info list[1];
524 };
525
526 VIRTCHNL_CHECK_STRUCT_LEN(24, virtchnl_tc_info);
527
528 /* VIRTCHNL_ADD_CLOUD_FILTER
529 * VIRTCHNL_DEL_CLOUD_FILTER
530 * VF sends these messages to add or delete a cloud filter based on the
531 * user specified match and action filters. These structures encompass
532 * all the information that the PF needs from the VF to add/delete a
533 * cloud filter.
534 */
535
536 struct virtchnl_l4_spec {
537 u8 src_mac[ETH_ALEN];
538 u8 dst_mac[ETH_ALEN];
539 __be16 vlan_id;
540 __be16 pad; /* reserved for future use */
541 __be32 src_ip[4];
542 __be32 dst_ip[4];
543 __be16 src_port;
544 __be16 dst_port;
545 };
546
547 VIRTCHNL_CHECK_STRUCT_LEN(52, virtchnl_l4_spec);
548
549 union virtchnl_flow_spec {
550 struct virtchnl_l4_spec tcp_spec;
551 u8 buffer[128]; /* reserved for future use */
552 };
553
554 VIRTCHNL_CHECK_UNION_LEN(128, virtchnl_flow_spec);
555
556 enum virtchnl_action {
557 /* action types */
558 VIRTCHNL_ACTION_DROP = 0,
559 VIRTCHNL_ACTION_TC_REDIRECT,
560 };
561
562 enum virtchnl_flow_type {
563 /* flow types */
564 VIRTCHNL_TCP_V4_FLOW = 0,
565 VIRTCHNL_TCP_V6_FLOW,
566 };
567
568 struct virtchnl_filter {
569 union virtchnl_flow_spec data;
570 union virtchnl_flow_spec mask;
571 enum virtchnl_flow_type flow_type;
572 enum virtchnl_action action;
573 u32 action_meta;
574 u8 field_flags;
575 u8 pad[3];
576 };
577
578 VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
579
580 /* VIRTCHNL_OP_EVENT
581 * PF sends this message to inform the VF driver of events that may affect it.
582 * No direct response is expected from the VF, though it may generate other
583 * messages in response to this one.
584 */
585 enum virtchnl_event_codes {
586 VIRTCHNL_EVENT_UNKNOWN = 0,
587 VIRTCHNL_EVENT_LINK_CHANGE,
588 VIRTCHNL_EVENT_RESET_IMPENDING,
589 VIRTCHNL_EVENT_PF_DRIVER_CLOSE,
590 };
591
592 #define PF_EVENT_SEVERITY_INFO 0
593 #define PF_EVENT_SEVERITY_CERTAIN_DOOM 255
594
595 struct virtchnl_pf_event {
596 enum virtchnl_event_codes event;
597 union {
598 /* If the PF driver does not support the new speed reporting
599 * capabilities then use link_event else use link_event_adv to
600 * get the speed and link information. The ability to understand
601 * new speeds is indicated by setting the capability flag
602 * VIRTCHNL_VF_CAP_ADV_LINK_SPEED in vf_cap_flags parameter
603 * in virtchnl_vf_resource struct and can be used to determine
604 * which link event struct to use below.
605 */
606 struct {
607 enum virtchnl_link_speed link_speed;
608 bool link_status;
609 } link_event;
610 struct {
611 /* link_speed provided in Mbps */
612 u32 link_speed;
613 u8 link_status;
614 u8 pad[3];
615 } link_event_adv;
616 } event_data;
617
618 int severity;
619 };
620
621 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
622
623 /* VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP
624 * VF uses this message to request PF to map IWARP vectors to IWARP queues.
625 * The request for this originates from the VF IWARP driver through
626 * a client interface between VF LAN and VF IWARP driver.
627 * A vector could have an AEQ and CEQ attached to it although
628 * there is a single AEQ per VF IWARP instance in which case
629 * most vectors will have an INVALID_IDX for aeq and valid idx for ceq.
630 * There will never be a case where there will be multiple CEQs attached
631 * to a single vector.
632 * PF configures interrupt mapping and returns status.
633 */
634
635 struct virtchnl_iwarp_qv_info {
636 u32 v_idx; /* msix_vector */
637 u16 ceq_idx;
638 u16 aeq_idx;
639 u8 itr_idx;
640 u8 pad[3];
641 };
642
643 VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
644
645 struct virtchnl_iwarp_qvlist_info {
646 u32 num_vectors;
647 struct virtchnl_iwarp_qv_info qv_info[1];
648 };
649
650 VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
651
652 /* VF reset states - these are written into the RSTAT register:
653 * VFGEN_RSTAT on the VF
654 * When the PF initiates a reset, it writes 0
655 * When the reset is complete, it writes 1
656 * When the PF detects that the VF has recovered, it writes 2
657 * VF checks this register periodically to determine if a reset has occurred,
658 * then polls it to know when the reset is complete.
659 * If either the PF or VF reads the register while the hardware
660 * is in a reset state, it will return DEADBEEF, which, when masked
661 * will result in 3.
662 */
663 enum virtchnl_vfr_states {
664 VIRTCHNL_VFR_INPROGRESS = 0,
665 VIRTCHNL_VFR_COMPLETED,
666 VIRTCHNL_VFR_VFACTIVE,
667 };
668
669 /**
670 * virtchnl_vc_validate_vf_msg
671 * @ver: Virtchnl version info
672 * @v_opcode: Opcode for the message
673 * @msg: pointer to the msg buffer
674 * @msglen: msg length
675 *
676 * validate msg format against struct for each opcode
677 */
678 static inline int
virtchnl_vc_validate_vf_msg(struct virtchnl_version_info * ver,u32 v_opcode,u8 * msg,u16 msglen)679 virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
680 u8 *msg, u16 msglen)
681 {
682 bool err_msg_format = false;
683 int valid_len = 0;
684
685 /* Validate message length. */
686 switch (v_opcode) {
687 case VIRTCHNL_OP_VERSION:
688 valid_len = sizeof(struct virtchnl_version_info);
689 break;
690 case VIRTCHNL_OP_RESET_VF:
691 break;
692 case VIRTCHNL_OP_GET_VF_RESOURCES:
693 if (VF_IS_V11(ver))
694 valid_len = sizeof(u32);
695 break;
696 case VIRTCHNL_OP_CONFIG_TX_QUEUE:
697 valid_len = sizeof(struct virtchnl_txq_info);
698 break;
699 case VIRTCHNL_OP_CONFIG_RX_QUEUE:
700 valid_len = sizeof(struct virtchnl_rxq_info);
701 break;
702 case VIRTCHNL_OP_CONFIG_VSI_QUEUES:
703 valid_len = sizeof(struct virtchnl_vsi_queue_config_info);
704 if (msglen >= valid_len) {
705 struct virtchnl_vsi_queue_config_info *vqc =
706 (struct virtchnl_vsi_queue_config_info *)msg;
707 valid_len += (vqc->num_queue_pairs *
708 sizeof(struct
709 virtchnl_queue_pair_info));
710 if (vqc->num_queue_pairs == 0)
711 err_msg_format = true;
712 }
713 break;
714 case VIRTCHNL_OP_CONFIG_IRQ_MAP:
715 valid_len = sizeof(struct virtchnl_irq_map_info);
716 if (msglen >= valid_len) {
717 struct virtchnl_irq_map_info *vimi =
718 (struct virtchnl_irq_map_info *)msg;
719 valid_len += (vimi->num_vectors *
720 sizeof(struct virtchnl_vector_map));
721 if (vimi->num_vectors == 0)
722 err_msg_format = true;
723 }
724 break;
725 case VIRTCHNL_OP_ENABLE_QUEUES:
726 case VIRTCHNL_OP_DISABLE_QUEUES:
727 valid_len = sizeof(struct virtchnl_queue_select);
728 break;
729 case VIRTCHNL_OP_ADD_ETH_ADDR:
730 case VIRTCHNL_OP_DEL_ETH_ADDR:
731 valid_len = sizeof(struct virtchnl_ether_addr_list);
732 if (msglen >= valid_len) {
733 struct virtchnl_ether_addr_list *veal =
734 (struct virtchnl_ether_addr_list *)msg;
735 valid_len += veal->num_elements *
736 sizeof(struct virtchnl_ether_addr);
737 if (veal->num_elements == 0)
738 err_msg_format = true;
739 }
740 break;
741 case VIRTCHNL_OP_ADD_VLAN:
742 case VIRTCHNL_OP_DEL_VLAN:
743 valid_len = sizeof(struct virtchnl_vlan_filter_list);
744 if (msglen >= valid_len) {
745 struct virtchnl_vlan_filter_list *vfl =
746 (struct virtchnl_vlan_filter_list *)msg;
747 valid_len += vfl->num_elements * sizeof(u16);
748 if (vfl->num_elements == 0)
749 err_msg_format = true;
750 }
751 break;
752 case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
753 valid_len = sizeof(struct virtchnl_promisc_info);
754 break;
755 case VIRTCHNL_OP_GET_STATS:
756 valid_len = sizeof(struct virtchnl_queue_select);
757 break;
758 case VIRTCHNL_OP_IWARP:
759 /* These messages are opaque to us and will be validated in
760 * the RDMA client code. We just need to check for nonzero
761 * length. The firmware will enforce max length restrictions.
762 */
763 if (msglen)
764 valid_len = msglen;
765 else
766 err_msg_format = true;
767 break;
768 case VIRTCHNL_OP_RELEASE_IWARP_IRQ_MAP:
769 break;
770 case VIRTCHNL_OP_CONFIG_IWARP_IRQ_MAP:
771 valid_len = sizeof(struct virtchnl_iwarp_qvlist_info);
772 if (msglen >= valid_len) {
773 struct virtchnl_iwarp_qvlist_info *qv =
774 (struct virtchnl_iwarp_qvlist_info *)msg;
775 if (qv->num_vectors == 0) {
776 err_msg_format = true;
777 break;
778 }
779 valid_len += ((qv->num_vectors - 1) *
780 sizeof(struct virtchnl_iwarp_qv_info));
781 }
782 break;
783 case VIRTCHNL_OP_CONFIG_RSS_KEY:
784 valid_len = sizeof(struct virtchnl_rss_key);
785 if (msglen >= valid_len) {
786 struct virtchnl_rss_key *vrk =
787 (struct virtchnl_rss_key *)msg;
788 valid_len += vrk->key_len - 1;
789 }
790 break;
791 case VIRTCHNL_OP_CONFIG_RSS_LUT:
792 valid_len = sizeof(struct virtchnl_rss_lut);
793 if (msglen >= valid_len) {
794 struct virtchnl_rss_lut *vrl =
795 (struct virtchnl_rss_lut *)msg;
796 valid_len += vrl->lut_entries - 1;
797 }
798 break;
799 case VIRTCHNL_OP_GET_RSS_HENA_CAPS:
800 break;
801 case VIRTCHNL_OP_SET_RSS_HENA:
802 valid_len = sizeof(struct virtchnl_rss_hena);
803 break;
804 case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
805 case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
806 break;
807 case VIRTCHNL_OP_REQUEST_QUEUES:
808 valid_len = sizeof(struct virtchnl_vf_res_request);
809 break;
810 case VIRTCHNL_OP_ENABLE_CHANNELS:
811 valid_len = sizeof(struct virtchnl_tc_info);
812 if (msglen >= valid_len) {
813 struct virtchnl_tc_info *vti =
814 (struct virtchnl_tc_info *)msg;
815 valid_len += (vti->num_tc - 1) *
816 sizeof(struct virtchnl_channel_info);
817 if (vti->num_tc == 0)
818 err_msg_format = true;
819 }
820 break;
821 case VIRTCHNL_OP_DISABLE_CHANNELS:
822 break;
823 case VIRTCHNL_OP_ADD_CLOUD_FILTER:
824 valid_len = sizeof(struct virtchnl_filter);
825 break;
826 case VIRTCHNL_OP_DEL_CLOUD_FILTER:
827 valid_len = sizeof(struct virtchnl_filter);
828 break;
829 /* These are always errors coming from the VF. */
830 case VIRTCHNL_OP_EVENT:
831 case VIRTCHNL_OP_UNKNOWN:
832 default:
833 return VIRTCHNL_STATUS_ERR_PARAM;
834 }
835 /* few more checks */
836 if (err_msg_format || valid_len != msglen)
837 return VIRTCHNL_STATUS_ERR_OPCODE_MISMATCH;
838
839 return 0;
840 }
841 #endif /* _VIRTCHNL_H_ */
842