1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
4 *
5 * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
6 */
7
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/delay.h>
11
12 #include <linux/input.h>
13 #include <linux/usb.h>
14
15 #include <media/rc-core.h>
16
17 #include "tm6000.h"
18 #include "tm6000-regs.h"
19
20 static unsigned int ir_debug;
21 module_param(ir_debug, int, 0644);
22 MODULE_PARM_DESC(ir_debug, "debug message level");
23
24 static unsigned int enable_ir = 1;
25 module_param(enable_ir, int, 0644);
26 MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
27
28 static unsigned int ir_clock_mhz = 12;
29 module_param(ir_clock_mhz, int, 0644);
30 MODULE_PARM_DESC(ir_clock_mhz, "ir clock, in MHz");
31
32 #define URB_SUBMIT_DELAY 100 /* ms - Delay to submit an URB request on retrial and init */
33 #define URB_INT_LED_DELAY 100 /* ms - Delay to turn led on again on int mode */
34
35 #undef dprintk
36
37 #define dprintk(level, fmt, arg...) do {\
38 if (ir_debug >= level) \
39 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
40 } while (0)
41
42 struct tm6000_ir_poll_result {
43 u16 rc_data;
44 };
45
46 struct tm6000_IR {
47 struct tm6000_core *dev;
48 struct rc_dev *rc;
49 char name[32];
50 char phys[32];
51
52 /* poll expernal decoder */
53 int polling;
54 struct delayed_work work;
55 u8 wait:1;
56 u8 pwled:2;
57 u8 submit_urb:1;
58 struct urb *int_urb;
59
60 /* IR device properties */
61 u64 rc_proto;
62 };
63
tm6000_ir_wait(struct tm6000_core * dev,u8 state)64 void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
65 {
66 struct tm6000_IR *ir = dev->ir;
67
68 if (!dev->ir)
69 return;
70
71 dprintk(2, "%s: %i\n",__func__, ir->wait);
72
73 if (state)
74 ir->wait = 1;
75 else
76 ir->wait = 0;
77 }
78
tm6000_ir_config(struct tm6000_IR * ir)79 static int tm6000_ir_config(struct tm6000_IR *ir)
80 {
81 struct tm6000_core *dev = ir->dev;
82 u32 pulse = 0, leader = 0;
83
84 dprintk(2, "%s\n",__func__);
85
86 /*
87 * The IR decoder supports RC-5 or NEC, with a configurable timing.
88 * The timing configuration there is not that accurate, as it uses
89 * approximate values. The NEC spec mentions a 562.5 unit period,
90 * and RC-5 uses a 888.8 period.
91 * Currently, driver assumes a clock provided by a 12 MHz XTAL, but
92 * a modprobe parameter can adjust it.
93 * Adjustments are required for other timings.
94 * It seems that the 900ms timing for NEC is used to detect a RC-5
95 * IR, in order to discard such decoding
96 */
97
98 switch (ir->rc_proto) {
99 case RC_PROTO_BIT_NEC:
100 leader = 900; /* ms */
101 pulse = 700; /* ms - the actual value would be 562 */
102 break;
103 default:
104 case RC_PROTO_BIT_RC5:
105 leader = 900; /* ms - from the NEC decoding */
106 pulse = 1780; /* ms - The actual value would be 1776 */
107 break;
108 }
109
110 pulse = ir_clock_mhz * pulse;
111 leader = ir_clock_mhz * leader;
112 if (ir->rc_proto == RC_PROTO_BIT_NEC)
113 leader = leader | 0x8000;
114
115 dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n",
116 __func__,
117 (ir->rc_proto == RC_PROTO_BIT_NEC) ? "NEC" : "RC-5",
118 ir_clock_mhz, leader, pulse);
119
120 /* Remote WAKEUP = enable, normal mode, from IR decoder output */
121 tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
122
123 /* Enable IR reception on non-busrt mode */
124 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f);
125
126 /* IR_WKUP_SEL = Low byte in decoded IR data */
127 tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff);
128 /* IR_WKU_ADD code */
129 tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff);
130
131 tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8);
132 tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader);
133
134 tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8);
135 tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse);
136
137 if (!ir->polling)
138 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
139 else
140 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
141 msleep(10);
142
143 /* Shows that IR is working via the LED */
144 tm6000_flash_led(dev, 0);
145 msleep(100);
146 tm6000_flash_led(dev, 1);
147 ir->pwled = 1;
148
149 return 0;
150 }
151
tm6000_ir_keydown(struct tm6000_IR * ir,const char * buf,unsigned int len)152 static void tm6000_ir_keydown(struct tm6000_IR *ir,
153 const char *buf, unsigned int len)
154 {
155 u8 device, command;
156 u32 scancode;
157 enum rc_proto protocol;
158
159 if (len < 1)
160 return;
161
162 command = buf[0];
163 device = (len > 1 ? buf[1] : 0x0);
164 switch (ir->rc_proto) {
165 case RC_PROTO_BIT_RC5:
166 protocol = RC_PROTO_RC5;
167 scancode = RC_SCANCODE_RC5(device, command);
168 break;
169 case RC_PROTO_BIT_NEC:
170 protocol = RC_PROTO_NEC;
171 scancode = RC_SCANCODE_NEC(device, command);
172 break;
173 default:
174 protocol = RC_PROTO_OTHER;
175 scancode = RC_SCANCODE_OTHER(device << 8 | command);
176 break;
177 }
178
179 dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n",
180 __func__, protocol, scancode);
181 rc_keydown(ir->rc, protocol, scancode, 0);
182 }
183
tm6000_ir_urb_received(struct urb * urb)184 static void tm6000_ir_urb_received(struct urb *urb)
185 {
186 struct tm6000_core *dev = urb->context;
187 struct tm6000_IR *ir = dev->ir;
188 char *buf;
189
190 dprintk(2, "%s\n",__func__);
191 if (urb->status < 0 || urb->actual_length <= 0) {
192 printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n",
193 urb->status, urb->actual_length);
194 ir->submit_urb = 1;
195 schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
196 return;
197 }
198 buf = urb->transfer_buffer;
199
200 if (ir_debug)
201 print_hex_dump(KERN_DEBUG, "tm6000: IR data: ",
202 DUMP_PREFIX_OFFSET,16, 1,
203 buf, urb->actual_length, false);
204
205 tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length);
206
207 usb_submit_urb(urb, GFP_ATOMIC);
208 /*
209 * Flash the led. We can't do it here, as it is running on IRQ context.
210 * So, use the scheduler to do it, in a few ms.
211 */
212 ir->pwled = 2;
213 schedule_delayed_work(&ir->work, msecs_to_jiffies(10));
214 }
215
tm6000_ir_handle_key(struct work_struct * work)216 static void tm6000_ir_handle_key(struct work_struct *work)
217 {
218 struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
219 struct tm6000_core *dev = ir->dev;
220 int rc;
221 u8 buf[2];
222
223 if (ir->wait)
224 return;
225
226 dprintk(3, "%s\n",__func__);
227
228 rc = tm6000_read_write_usb(dev, USB_DIR_IN |
229 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
230 REQ_02_GET_IR_CODE, 0, 0, buf, 2);
231 if (rc < 0)
232 return;
233
234 /* Check if something was read */
235 if ((buf[0] & 0xff) == 0xff) {
236 if (!ir->pwled) {
237 tm6000_flash_led(dev, 1);
238 ir->pwled = 1;
239 }
240 return;
241 }
242
243 tm6000_ir_keydown(ir, buf, rc);
244 tm6000_flash_led(dev, 0);
245 ir->pwled = 0;
246
247 /* Re-schedule polling */
248 schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
249 }
250
tm6000_ir_int_work(struct work_struct * work)251 static void tm6000_ir_int_work(struct work_struct *work)
252 {
253 struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
254 struct tm6000_core *dev = ir->dev;
255 int rc;
256
257 dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb,
258 ir->pwled);
259
260 if (ir->submit_urb) {
261 dprintk(3, "Resubmit urb\n");
262 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
263
264 rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC);
265 if (rc < 0) {
266 printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n",
267 rc);
268 /* Retry in 100 ms */
269 schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
270 return;
271 }
272 ir->submit_urb = 0;
273 }
274
275 /* Led is enabled only if USB submit doesn't fail */
276 if (ir->pwled == 2) {
277 tm6000_flash_led(dev, 0);
278 ir->pwled = 0;
279 schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY));
280 } else if (!ir->pwled) {
281 tm6000_flash_led(dev, 1);
282 ir->pwled = 1;
283 }
284 }
285
tm6000_ir_start(struct rc_dev * rc)286 static int tm6000_ir_start(struct rc_dev *rc)
287 {
288 struct tm6000_IR *ir = rc->priv;
289
290 dprintk(2, "%s\n",__func__);
291
292 schedule_delayed_work(&ir->work, 0);
293
294 return 0;
295 }
296
tm6000_ir_stop(struct rc_dev * rc)297 static void tm6000_ir_stop(struct rc_dev *rc)
298 {
299 struct tm6000_IR *ir = rc->priv;
300
301 dprintk(2, "%s\n",__func__);
302
303 cancel_delayed_work_sync(&ir->work);
304 }
305
tm6000_ir_change_protocol(struct rc_dev * rc,u64 * rc_proto)306 static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_proto)
307 {
308 struct tm6000_IR *ir = rc->priv;
309
310 if (!ir)
311 return 0;
312
313 dprintk(2, "%s\n",__func__);
314
315 ir->rc_proto = *rc_proto;
316
317 tm6000_ir_config(ir);
318 /* TODO */
319 return 0;
320 }
321
__tm6000_ir_int_start(struct rc_dev * rc)322 static int __tm6000_ir_int_start(struct rc_dev *rc)
323 {
324 struct tm6000_IR *ir = rc->priv;
325 struct tm6000_core *dev;
326 int pipe, size;
327 int err = -ENOMEM;
328
329 if (!ir)
330 return -ENODEV;
331 dev = ir->dev;
332
333 dprintk(2, "%s\n",__func__);
334
335 ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC);
336 if (!ir->int_urb)
337 return -ENOMEM;
338
339 pipe = usb_rcvintpipe(dev->udev,
340 dev->int_in.endp->desc.bEndpointAddress
341 & USB_ENDPOINT_NUMBER_MASK);
342
343 size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
344 dprintk(1, "IR max size: %d\n", size);
345
346 ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC);
347 if (!ir->int_urb->transfer_buffer) {
348 usb_free_urb(ir->int_urb);
349 return err;
350 }
351 dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval);
352
353 usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
354 ir->int_urb->transfer_buffer, size,
355 tm6000_ir_urb_received, dev,
356 dev->int_in.endp->desc.bInterval);
357
358 ir->submit_urb = 1;
359 schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY));
360
361 return 0;
362 }
363
__tm6000_ir_int_stop(struct rc_dev * rc)364 static void __tm6000_ir_int_stop(struct rc_dev *rc)
365 {
366 struct tm6000_IR *ir = rc->priv;
367
368 if (!ir || !ir->int_urb)
369 return;
370
371 dprintk(2, "%s\n",__func__);
372
373 usb_kill_urb(ir->int_urb);
374 kfree(ir->int_urb->transfer_buffer);
375 usb_free_urb(ir->int_urb);
376 ir->int_urb = NULL;
377 }
378
tm6000_ir_int_start(struct tm6000_core * dev)379 int tm6000_ir_int_start(struct tm6000_core *dev)
380 {
381 struct tm6000_IR *ir = dev->ir;
382
383 if (!ir)
384 return 0;
385
386 return __tm6000_ir_int_start(ir->rc);
387 }
388
tm6000_ir_int_stop(struct tm6000_core * dev)389 void tm6000_ir_int_stop(struct tm6000_core *dev)
390 {
391 struct tm6000_IR *ir = dev->ir;
392
393 if (!ir || !ir->rc)
394 return;
395
396 __tm6000_ir_int_stop(ir->rc);
397 }
398
tm6000_ir_init(struct tm6000_core * dev)399 int tm6000_ir_init(struct tm6000_core *dev)
400 {
401 struct tm6000_IR *ir;
402 struct rc_dev *rc;
403 int err = -ENOMEM;
404 u64 rc_proto;
405
406 if (!enable_ir)
407 return -ENODEV;
408
409 if (!dev->caps.has_remote)
410 return 0;
411
412 if (!dev->ir_codes)
413 return 0;
414
415 ir = kzalloc(sizeof(*ir), GFP_ATOMIC);
416 rc = rc_allocate_device(RC_DRIVER_SCANCODE);
417 if (!ir || !rc)
418 goto out;
419
420 dprintk(2, "%s\n", __func__);
421
422 /* record handles to ourself */
423 ir->dev = dev;
424 dev->ir = ir;
425 ir->rc = rc;
426
427 /* input setup */
428 rc->allowed_protocols = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_NEC;
429 /* Needed, in order to support NEC remotes with 24 or 32 bits */
430 rc->scancode_mask = 0xffff;
431 rc->priv = ir;
432 rc->change_protocol = tm6000_ir_change_protocol;
433 if (dev->int_in.endp) {
434 rc->open = __tm6000_ir_int_start;
435 rc->close = __tm6000_ir_int_stop;
436 INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work);
437 } else {
438 rc->open = tm6000_ir_start;
439 rc->close = tm6000_ir_stop;
440 ir->polling = 50;
441 INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key);
442 }
443
444 snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
445 dev->name);
446
447 usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
448 strlcat(ir->phys, "/input0", sizeof(ir->phys));
449
450 rc_proto = RC_PROTO_BIT_UNKNOWN;
451 tm6000_ir_change_protocol(rc, &rc_proto);
452
453 rc->device_name = ir->name;
454 rc->input_phys = ir->phys;
455 rc->input_id.bustype = BUS_USB;
456 rc->input_id.version = 1;
457 rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
458 rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
459 rc->map_name = dev->ir_codes;
460 rc->driver_name = "tm6000";
461 rc->dev.parent = &dev->udev->dev;
462
463 /* ir register */
464 err = rc_register_device(rc);
465 if (err)
466 goto out;
467
468 return 0;
469
470 out:
471 dev->ir = NULL;
472 rc_free_device(rc);
473 kfree(ir);
474 return err;
475 }
476
tm6000_ir_fini(struct tm6000_core * dev)477 int tm6000_ir_fini(struct tm6000_core *dev)
478 {
479 struct tm6000_IR *ir = dev->ir;
480
481 /* skip detach on non attached board */
482
483 if (!ir)
484 return 0;
485
486 dprintk(2, "%s\n",__func__);
487
488 if (!ir->polling)
489 __tm6000_ir_int_stop(ir->rc);
490
491 tm6000_ir_stop(ir->rc);
492
493 /* Turn off the led */
494 tm6000_flash_led(dev, 0);
495 ir->pwled = 0;
496
497 rc_unregister_device(ir->rc);
498
499 kfree(ir);
500 dev->ir = NULL;
501
502 return 0;
503 }
504