1 /*
2 * Header for MultiMediaCard (MMC)
3 *
4 * Copyright 2002 Hewlett-Packard Company
5 *
6 * Use consistent with the GNU GPL is permitted,
7 * provided that this copyright notice is
8 * preserved in its entirety in all copies and derived works.
9 *
10 * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11 * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12 * FITNESS FOR ANY PARTICULAR PURPOSE.
13 *
14 * Many thanks to Alessandro Rubini and Jonathan Corbet!
15 *
16 * Based strongly on code by:
17 *
18 * Author: Yong-iL Joh <tolkien@mizi.com>
19 *
20 * Author: Andrew Christian
21 * 15 May 2002
22 */
23
24 #ifndef LINUX_MMC_MMC_H
25 #define LINUX_MMC_MMC_H
26
27 #include <linux/types.h>
28
29 /* Standard MMC commands (4.1) type argument response */
30 /* class 1 */
31 #define MMC_GO_IDLE_STATE 0 /* bc */
32 #define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
33 #define MMC_ALL_SEND_CID 2 /* bcr R2 */
34 #define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
35 #define MMC_SET_DSR 4 /* bc [31:16] RCA */
36 #define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
37 #define MMC_SWITCH 6 /* ac [31:0] See below R1b */
38 #define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
39 #define MMC_SEND_EXT_CSD 8 /* adtc R1 */
40 #define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
41 #define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
42 #define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
43 #define MMC_STOP_TRANSMISSION 12 /* ac R1b */
44 #define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
45 #define MMC_BUS_TEST_R 14 /* adtc R1 */
46 #define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
47 #define MMC_BUS_TEST_W 19 /* adtc R1 */
48 #define MMC_SPI_READ_OCR 58 /* spi spi_R3 */
49 #define MMC_SPI_CRC_ON_OFF 59 /* spi [0:0] flag spi_R1 */
50
51 /* class 2 */
52 #define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
53 #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
54 #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
55 #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
56 #define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
57
58 /* class 3 */
59 #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
60
61 /* class 4 */
62 #define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
63 #define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
64 #define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
65 #define MMC_PROGRAM_CID 26 /* adtc R1 */
66 #define MMC_PROGRAM_CSD 27 /* adtc R1 */
67
68 /* class 6 */
69 #define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
70 #define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
71 #define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
72
73 /* class 5 */
74 #define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
75 #define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
76 #define MMC_ERASE 38 /* ac R1b */
77
78 /* class 9 */
79 #define MMC_FAST_IO 39 /* ac <Complex> R4 */
80 #define MMC_GO_IRQ_STATE 40 /* bcr R5 */
81
82 /* class 7 */
83 #define MMC_LOCK_UNLOCK 42 /* adtc R1b */
84
85 /* class 8 */
86 #define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
87 #define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
88
89 /* class 11 */
90 #define MMC_QUE_TASK_PARAMS 44 /* ac [20:16] task id R1 */
91 #define MMC_QUE_TASK_ADDR 45 /* ac [31:0] data addr R1 */
92 #define MMC_EXECUTE_READ_TASK 46 /* adtc [20:16] task id R1 */
93 #define MMC_EXECUTE_WRITE_TASK 47 /* adtc [20:16] task id R1 */
94 #define MMC_CMDQ_TASK_MGMT 48 /* ac [20:16] task id R1b */
95
mmc_op_multi(u32 opcode)96 static inline bool mmc_op_multi(u32 opcode)
97 {
98 return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
99 opcode == MMC_READ_MULTIPLE_BLOCK;
100 }
101
102 /*
103 * MMC_SWITCH argument format:
104 *
105 * [31:26] Always 0
106 * [25:24] Access Mode
107 * [23:16] Location of target Byte in EXT_CSD
108 * [15:08] Value Byte
109 * [07:03] Always 0
110 * [02:00] Command Set
111 */
112
113 /*
114 MMC status in R1, for native mode (SPI bits are different)
115 Type
116 e : error bit
117 s : status bit
118 r : detected and set for the actual command response
119 x : detected and set during command execution. the host must poll
120 the card by sending status command in order to read these bits.
121 Clear condition
122 a : according to the card state
123 b : always related to the previous command. Reception of
124 a valid command will clear it (with a delay of one command)
125 c : clear by read
126 */
127
128 #define R1_OUT_OF_RANGE (1 << 31) /* er, c */
129 #define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
130 #define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
131 #define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
132 #define R1_ERASE_PARAM (1 << 27) /* ex, c */
133 #define R1_WP_VIOLATION (1 << 26) /* erx, c */
134 #define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
135 #define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
136 #define R1_COM_CRC_ERROR (1 << 23) /* er, b */
137 #define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
138 #define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
139 #define R1_CC_ERROR (1 << 20) /* erx, c */
140 #define R1_ERROR (1 << 19) /* erx, c */
141 #define R1_UNDERRUN (1 << 18) /* ex, c */
142 #define R1_OVERRUN (1 << 17) /* ex, c */
143 #define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
144 #define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
145 #define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
146 #define R1_ERASE_RESET (1 << 13) /* sr, c */
147 #define R1_STATUS(x) (x & 0xFFF9A000)
148 #define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
149 #define R1_READY_FOR_DATA (1 << 8) /* sx, a */
150 #define R1_SWITCH_ERROR (1 << 7) /* sx, c */
151 #define R1_EXCEPTION_EVENT (1 << 6) /* sr, a */
152 #define R1_APP_CMD (1 << 5) /* sr, c */
153
154 #define R1_STATE_IDLE 0
155 #define R1_STATE_READY 1
156 #define R1_STATE_IDENT 2
157 #define R1_STATE_STBY 3
158 #define R1_STATE_TRAN 4
159 #define R1_STATE_DATA 5
160 #define R1_STATE_RCV 6
161 #define R1_STATE_PRG 7
162 #define R1_STATE_DIS 8
163
mmc_ready_for_data(u32 status)164 static inline bool mmc_ready_for_data(u32 status)
165 {
166 /*
167 * Some cards mishandle the status bits, so make sure to check both the
168 * busy indication and the card state.
169 */
170 return status & R1_READY_FOR_DATA &&
171 R1_CURRENT_STATE(status) == R1_STATE_TRAN;
172 }
173
174 /*
175 * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
176 * R1 is the low order byte; R2 is the next highest byte, when present.
177 */
178 #define R1_SPI_IDLE (1 << 0)
179 #define R1_SPI_ERASE_RESET (1 << 1)
180 #define R1_SPI_ILLEGAL_COMMAND (1 << 2)
181 #define R1_SPI_COM_CRC (1 << 3)
182 #define R1_SPI_ERASE_SEQ (1 << 4)
183 #define R1_SPI_ADDRESS (1 << 5)
184 #define R1_SPI_PARAMETER (1 << 6)
185 /* R1 bit 7 is always zero */
186 #define R2_SPI_CARD_LOCKED (1 << 8)
187 #define R2_SPI_WP_ERASE_SKIP (1 << 9) /* or lock/unlock fail */
188 #define R2_SPI_LOCK_UNLOCK_FAIL R2_SPI_WP_ERASE_SKIP
189 #define R2_SPI_ERROR (1 << 10)
190 #define R2_SPI_CC_ERROR (1 << 11)
191 #define R2_SPI_CARD_ECC_ERROR (1 << 12)
192 #define R2_SPI_WP_VIOLATION (1 << 13)
193 #define R2_SPI_ERASE_PARAM (1 << 14)
194 #define R2_SPI_OUT_OF_RANGE (1 << 15) /* or CSD overwrite */
195 #define R2_SPI_CSD_OVERWRITE R2_SPI_OUT_OF_RANGE
196
197 /*
198 * OCR bits are mostly in host.h
199 */
200 #define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
201
202 /*
203 * Card Command Classes (CCC)
204 */
205 #define CCC_BASIC (1<<0) /* (0) Basic protocol functions */
206 /* (CMD0,1,2,3,4,7,9,10,12,13,15) */
207 /* (and for SPI, CMD58,59) */
208 #define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */
209 /* (CMD11) */
210 #define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */
211 /* (CMD16,17,18) */
212 #define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */
213 /* (CMD20) */
214 #define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */
215 /* (CMD16,24,25,26,27) */
216 #define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */
217 /* (CMD32,33,34,35,36,37,38,39) */
218 #define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */
219 /* (CMD28,29,30) */
220 #define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */
221 /* (CMD16,CMD42) */
222 #define CCC_APP_SPEC (1<<8) /* (8) Application specific */
223 /* (CMD55,56,57,ACMD*) */
224 #define CCC_IO_MODE (1<<9) /* (9) I/O mode */
225 /* (CMD5,39,40,52,53) */
226 #define CCC_SWITCH (1<<10) /* (10) High speed switch */
227 /* (CMD6,34,35,36,37,50) */
228 /* (11) Reserved */
229 /* (CMD?) */
230
231 /*
232 * CSD field definitions
233 */
234
235 #define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
236 #define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
237 #define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
238 #define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */
239
240 #define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
241 #define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
242 #define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
243 #define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */
244 #define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */
245
246 /*
247 * EXT_CSD fields
248 */
249
250 #define EXT_CSD_CMDQ_MODE_EN 15 /* R/W */
251 #define EXT_CSD_FLUSH_CACHE 32 /* W */
252 #define EXT_CSD_CACHE_CTRL 33 /* R/W */
253 #define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
254 #define EXT_CSD_PACKED_FAILURE_INDEX 35 /* RO */
255 #define EXT_CSD_PACKED_CMD_STATUS 36 /* RO */
256 #define EXT_CSD_EXP_EVENTS_STATUS 54 /* RO, 2 bytes */
257 #define EXT_CSD_EXP_EVENTS_CTRL 56 /* R/W, 2 bytes */
258 #define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */
259 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
260 #define EXT_CSD_PARTITION_SETTING_COMPLETED 155 /* R/W */
261 #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
262 #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
263 #define EXT_CSD_HPI_MGMT 161 /* R/W */
264 #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
265 #define EXT_CSD_BKOPS_EN 163 /* R/W */
266 #define EXT_CSD_BKOPS_START 164 /* W */
267 #define EXT_CSD_SANITIZE_START 165 /* W */
268 #define EXT_CSD_WR_REL_PARAM 166 /* RO */
269 #define EXT_CSD_RPMB_MULT 168 /* RO */
270 #define EXT_CSD_FW_CONFIG 169 /* R/W */
271 #define EXT_CSD_BOOT_WP 173 /* R/W */
272 #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
273 #define EXT_CSD_PART_CONFIG 179 /* R/W */
274 #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
275 #define EXT_CSD_BUS_WIDTH 183 /* R/W */
276 #define EXT_CSD_STROBE_SUPPORT 184 /* RO */
277 #define EXT_CSD_HS_TIMING 185 /* R/W */
278 #define EXT_CSD_POWER_CLASS 187 /* R/W */
279 #define EXT_CSD_REV 192 /* RO */
280 #define EXT_CSD_STRUCTURE 194 /* RO */
281 #define EXT_CSD_CARD_TYPE 196 /* RO */
282 #define EXT_CSD_DRIVER_STRENGTH 197 /* RO */
283 #define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */
284 #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
285 #define EXT_CSD_PWR_CL_52_195 200 /* RO */
286 #define EXT_CSD_PWR_CL_26_195 201 /* RO */
287 #define EXT_CSD_PWR_CL_52_360 202 /* RO */
288 #define EXT_CSD_PWR_CL_26_360 203 /* RO */
289 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
290 #define EXT_CSD_S_A_TIMEOUT 217 /* RO */
291 #define EXT_CSD_REL_WR_SEC_C 222 /* RO */
292 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
293 #define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
294 #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
295 #define EXT_CSD_BOOT_MULT 226 /* RO */
296 #define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
297 #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
298 #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
299 #define EXT_CSD_TRIM_MULT 232 /* RO */
300 #define EXT_CSD_PWR_CL_200_195 236 /* RO */
301 #define EXT_CSD_PWR_CL_200_360 237 /* RO */
302 #define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
303 #define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
304 #define EXT_CSD_BKOPS_STATUS 246 /* RO */
305 #define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
306 #define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
307 #define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
308 #define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
309 #define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
310 #define EXT_CSD_PRE_EOL_INFO 267 /* RO */
311 #define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A 268 /* RO */
312 #define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B 269 /* RO */
313 #define EXT_CSD_CMDQ_DEPTH 307 /* RO */
314 #define EXT_CSD_CMDQ_SUPPORT 308 /* RO */
315 #define EXT_CSD_SUPPORTED_MODE 493 /* RO */
316 #define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
317 #define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
318 #define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
319 #define EXT_CSD_MAX_PACKED_READS 501 /* RO */
320 #define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
321 #define EXT_CSD_HPI_FEATURES 503 /* RO */
322
323 /*
324 * EXT_CSD field definitions
325 */
326
327 #define EXT_CSD_WR_REL_PARAM_EN (1<<2)
328 #define EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR (1<<4)
329
330 #define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40)
331 #define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10)
332 #define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04)
333 #define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01)
334
335 #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
336 #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
337 #define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3)
338 #define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4)
339
340 #define EXT_CSD_PART_SETTING_COMPLETED (0x1)
341 #define EXT_CSD_PART_SUPPORT_PART_EN (0x1)
342
343 #define EXT_CSD_CMD_SET_NORMAL (1<<0)
344 #define EXT_CSD_CMD_SET_SECURE (1<<1)
345 #define EXT_CSD_CMD_SET_CPSECURE (1<<2)
346
347 #define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
348 #define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
349 #define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
350 EXT_CSD_CARD_TYPE_HS_52)
351 #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
352 /* DDR mode @1.8V or 3V I/O */
353 #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
354 /* DDR mode @1.2V I/O */
355 #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
356 | EXT_CSD_CARD_TYPE_DDR_1_2V)
357 #define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
358 #define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
359 /* SDR mode @1.2V I/O */
360 #define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
361 EXT_CSD_CARD_TYPE_HS200_1_2V)
362 #define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */
363 #define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
364 #define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
365 EXT_CSD_CARD_TYPE_HS400_1_2V)
366 #define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */
367
368 #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
369 #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
370 #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
371 #define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
372 #define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
373 #define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */
374
375 #define EXT_CSD_TIMING_BC 0 /* Backwards compatility */
376 #define EXT_CSD_TIMING_HS 1 /* High speed */
377 #define EXT_CSD_TIMING_HS200 2 /* HS200 */
378 #define EXT_CSD_TIMING_HS400 3 /* HS400 */
379 #define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */
380
381 #define EXT_CSD_SEC_ER_EN BIT(0)
382 #define EXT_CSD_SEC_BD_BLK_EN BIT(2)
383 #define EXT_CSD_SEC_GB_CL_EN BIT(4)
384 #define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */
385
386 #define EXT_CSD_RST_N_EN_MASK 0x3
387 #define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
388
389 #define EXT_CSD_NO_POWER_NOTIFICATION 0
390 #define EXT_CSD_POWER_ON 1
391 #define EXT_CSD_POWER_OFF_SHORT 2
392 #define EXT_CSD_POWER_OFF_LONG 3
393
394 #define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
395 #define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
396 #define EXT_CSD_PWR_CL_8BIT_SHIFT 4
397 #define EXT_CSD_PWR_CL_4BIT_SHIFT 0
398
399 #define EXT_CSD_PACKED_EVENT_EN BIT(3)
400
401 /*
402 * EXCEPTION_EVENT_STATUS field
403 */
404 #define EXT_CSD_URGENT_BKOPS BIT(0)
405 #define EXT_CSD_DYNCAP_NEEDED BIT(1)
406 #define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2)
407 #define EXT_CSD_PACKED_FAILURE BIT(3)
408
409 #define EXT_CSD_PACKED_GENERIC_ERROR BIT(0)
410 #define EXT_CSD_PACKED_INDEXED_ERROR BIT(1)
411
412 /*
413 * BKOPS status level
414 */
415 #define EXT_CSD_BKOPS_LEVEL_2 0x2
416
417 /*
418 * BKOPS modes
419 */
420 #define EXT_CSD_MANUAL_BKOPS_MASK 0x01
421 #define EXT_CSD_AUTO_BKOPS_MASK 0x02
422
423 /*
424 * Command Queue
425 */
426 #define EXT_CSD_CMDQ_MODE_ENABLED BIT(0)
427 #define EXT_CSD_CMDQ_DEPTH_MASK GENMASK(4, 0)
428 #define EXT_CSD_CMDQ_SUPPORTED BIT(0)
429
430 /*
431 * MMC_SWITCH access modes
432 */
433 #define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
434 #define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
435 #define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
436 #define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
437
438 /*
439 * Erase/trim/discard
440 */
441 #define MMC_ERASE_ARG 0x00000000
442 #define MMC_SECURE_ERASE_ARG 0x80000000
443 #define MMC_TRIM_ARG 0x00000001
444 #define MMC_DISCARD_ARG 0x00000003
445 #define MMC_SECURE_TRIM1_ARG 0x80000001
446 #define MMC_SECURE_TRIM2_ARG 0x80008000
447 #define MMC_SECURE_ARGS 0x80000000
448 #define MMC_TRIM_OR_DISCARD_ARGS 0x00008003
449
450 #define mmc_driver_type_mask(n) (1 << (n))
451
452 #endif /* LINUX_MMC_MMC_H */
453