root {
    module = "WiFi";
    wifi_config {
        match_attr = "hdf_wifi_driver";
        moduleConfig {
            featureMap = 0xFFFF;
            msgName = "WalService";
            Station {
                name = "sta";
                mode = true;

           }

            HostAp {
                name = "ap";
                mode = 0; /* 0-- notsupported; 1--softap-host; 2--soft AP DMAC HOST: 3-IOT 1:DMAC OFFLOAD: IPC */
                vapResNum = 1; /*virtual ap*/
                userResNum = 8; /*max users support each ap*/
           }

            P2P {
                name = "p2p";
                mode = false;
            }

            Mac80211 {
                mode = true;
            }

            Phy {
                mode = true;
            }
        }

        deviceList {
            template Chip {
                chipName = "";
                chipId = 0;
                featureMap = 0xFFFF;
                powerType = 0; /* 0:bootloader  1:hostctl */
                irqNo = 0;
                bus {
                    busType = 0; /* 0-sdio 1-usb 2-spi etc. */
                    funcNum = [1,2];
                    vendorId = 0;
                    deviceId = 0;
                    timeout = 1000;
                    blockSize = 512;
               }
            }
        }

        hisi :& deviceList {
            C1 :: Chip {
                chipName = "hisi"; /* hi3881 */
                chipId = 0;
                featureMap = 0xFFFF;
                powerType = 0;
                irqNo = 0;
                bus {
                    busType = 0; /* 0-sdio 1-usb 2-spi etc. */
                    funcNum = [1];
                    vendorId = 0x0296;
                    deviceId = 0x5347;
                    timeout = 1000;
                    blockSize = 512;
                }
            }
        }

        board {
            boardName = "3518EV300";
            busType = 0; /* 0 sdio */
            busIdx = 1;
            reset   = [5,0]; /* GPIO5_0 */
            gpioArgs = [10,10,10]; /* GPIO_GROUP_NUM, GPIO_BIT_NUM, GPIO_IRQ_NUM */
            busRegs {
                cclk_out = [0x112C0048, 0x1A04];
                ccmd     = [0x112C004C, 0x1004];
                cdata0    = [0x112C0064, 0x1004];
                cdata1    = [0x112C0058, 0x1004];
                cdata2    = [0x112C005C, 0x1004];
                cdata3    = [0x112C0060, 0x1004];
            }
        }
    }
}