Lines Matching full:default
11 - 0 - disabled (default)
17 parameters to their default state (RFC1122 for hosts, RFC1812
21 Default value of TTL field (Time To Live) for outgoing (but not
23 Default: 64 (as recommended by RFC1700)
49 Default: FALSE
52 default 552 - minimum discovered Path MTU
55 By default we don't trust protocol path MTUs while forwarding
63 Default: 0 (disabled)
76 Default: 0
84 Default: 0 (disabled)
95 Default: 0 (Layer 3)
107 Default: 512kB Minimum: 64kB Maximum: 64MB
114 Default: 1 (Update priority.)
128 neigh/default/gc_thresh1 - INTEGER
132 Default: 128
134 neigh/default/gc_thresh2 - INTEGER
139 Default: 512
141 neigh/default/gc_thresh3 - INTEGER
146 Default: 1024
148 neigh/default/unres_qlen_bytes - INTEGER
155 Default: SK_WMEM_MAX, (same as net.core.wmem_default).
161 neigh/default/unres_qlen - INTEGER
167 Prior to linux 3.3, the default value is 3 which may cause
168 unexpected packet loss. The current default value is calculated
169 according to default value of unres_qlen_bytes and true size of
172 Default: 101
216 Default: 64
249 reset them. Default state is FALSE. It means that if overflow
262 Default: 1
269 Default is "reno" and the default setting (tcp_congestion_control).
277 Default: 31
288 Default : 1
304 Default : 48
313 Default : 48 (at least 8 bytes of payload per segment)
319 Default is set as part of kernel configuration.
338 Default: 3
357 Default: 2
367 Default: 1 (fallback enabled)
382 Default: 60 seconds
391 By default it's enabled with a non-zero value. 0 disables F-RTO.
402 Default: 0
424 Default: 500 (milliseconds).
428 Default: 2hours.
432 connection is broken. Default value: 9.
437 after probes started. Default value: 75sec i.e. connection
448 Default: 0 (disabled)
460 if network conditions require more than default value,
485 if network conditions require more than default value.
510 Default: 300
516 default.
523 - 1 - Disabled by default, enabled when an ICMP black hole detected
528 Discovery reprobe. The default is reprobing every 10 minutes as
533 will stop in respect to the width of search range in bytes. Default
537 By default, TCP saves various connection metrics in the route cache
547 Default is 1, which disables ssthresh metrics.
554 The default value is 8.
574 Default: 0x1
581 Default: 3
588 Default: 300
602 default.
611 The default value of 15 yields a hypothetical timeout of 924.6
624 Default: 0
626 tcp_rmem - vector of 3 INTEGERs: min, default, max
631 Default: 4K
633 default: initial size of receive buffer used by TCP sockets.
635 Default: 131072 bytes.
643 Default: between 131072 and 6MB, depending on RAM size.
651 The default is 1ms, based on TSO autosizing period.
653 Default : 1,000,000 ns (1 ms)
661 Default : 100,000 ns (100 us)
667 Default : 44
675 Default: 1
682 Default: FALSE
686 be retransmitted. Should not be higher than 255. Default value
695 Default: 1
720 The client support is enabled by flag 0x1 (on by default). The client
724 The server support is enabled by flag 0x2 (off by default). Then
740 default without explicit TCP_FASTOPEN socket option.
743 Default: 0x1
756 By default, it is set to 0 (feature is disabled).
780 will be retransmitted. Should not be higher than 127. Default value
793 Default: 1
804 Default: 2
813 Default: 200
821 Default: 120
829 Default: 3
842 Default: 2
847 tcp_wmem - vector of 3 INTEGERs: min, default, max
851 Default: 4K
853 default: initial size of send buffer used by TCP sockets. This
858 Default: 16K
866 Default: between 64K and 4MB, depending on RAM size.
879 Default: UINT_MAX (0xFFFFFFFF)
887 Default: 0
900 Default: 0
912 Default: 1048576 (16 * 65536)
917 Default: 1000
925 Default: 0 (disabled)
937 Default: 0 (disabled)
950 Default is calculated at boot time from amount of available memory.
957 Default: 4K
964 Default: 4K
976 Default: 1 (enabled)
988 Default: 1
998 Default: 10
1006 Default: 0
1016 Default: 0
1028 The default values are 32768 and 60999 respectively.
1059 Default: Empty
1068 Default: 1024
1074 Default: 0
1077 By default, bind() does not select the ports automatically even if
1083 Default: 0
1091 Default: 0
1101 Default: 1
1105 The default is "1 0", meaning, that nobody (not even root) may
1113 Default: 1
1119 Default: 1
1125 Default: 0
1131 Default: 1
1141 Default: 1000
1149 Default: 1000
1156 Default: 50
1163 Default mask: 0000001100000011000 (6168)
1183 .. [1] These are rate limited by default (see default mask above)
1191 Default: 1
1208 Default: 0
1212 Default: 20
1236 Default: 10
1241 Default: 2 (as specified by RFC2236 8.1)
1246 - 0 - (default) No enforcement of a IGMP version, IGMPv1/v2 fallback
1253 - 3 - Enforce to use IGMP version 3. The same react with default 0.
1260 this value as default 0 is recommended.
1289 default:
1308 The default value 0 means that the device is the only interface
1351 default TRUE
1364 default TRUE
1373 Default: TRUE
1382 default FALSE
1391 default
1400 default FALSE
1406 default FALSE
1413 By default failed packets are discarded.
1426 Default value is 0. Note that some distributions enable it
1437 - 0 - (default) The kernel can respond to arp requests with addresses
1453 - 0 - (default) Use any local address, configured on any interface
1484 - 0 - (default): reply for any local target IP address, configured
1503 0 (default): do nothing
1550 Default: 10000 (10 seconds)
1556 Default: 1000 (1 seconds)
1568 1122, but is disabled by default for compatibility reasons.
1570 Default: off (0)
1577 Default: off (0)
1583 Default value is 0.
1595 Default TRUE
1617 Default value for IPV6_V6ONLY socket option,
1624 Default: FALSE (as specified in RFC3493)
1634 Default: TRUE
1644 1 automatic flow labels are enabled by default, they can be
1653 Default: 1
1663 Default: true
1685 Default: 0
1690 Default: 0 (Layer 3)
1705 Default: FALSE
1712 Default: 1 (as specified in RFC7217)
1718 Default: 3 (as specified in RFC7217)
1723 Default: 2 (as specified by RFC3810 9.1)
1733 Default: 8
1741 Default: 8
1747 Default: INT_MAX (unlimited)
1753 Default: INT_MAX (unlimited)
1758 generate this message; IPv6 does by default. Setting this sysctl
1762 Default: false (generate message)
1767 default which means route dumps and notifications contain the new
1774 Default: true (backward compat mode)
1803 Default is 0.
1805 ``conf/default/*``:
1806 Change the interface-specific default settings.
1834 Default: 0
1859 Functional default:
1865 Learn default router in Router Advertisement.
1867 Functional default:
1876 Default is to NOT accept these as it may be an un-intended
1879 Functional default:
1892 Default: 1
1897 Functional default:
1908 Functional default:
1919 Functional default:
1927 Functional default:
1936 Functional default:
1944 Functional default:
1955 Default: 0
1961 Functional default:
1969 Default: 1
1986 By default, Host behaviour is assumed. This means:
1989 2. If accept_ra is TRUE (default), transmit Router
1991 3. If accept_ra is TRUE (default), accept Router
1993 4. If accept_redirects is TRUE (default), accept Redirects.
2005 Default: 0 (disabled) if global forwarding is disabled (default),
2009 Default Hop Limit to set.
2011 Default: 64
2014 Default Maximum Transfer Unit
2016 Default: 1280 (IPv6 required minimum)
2022 Default: 0
2028 Default: 60
2034 Default: 1
2039 Default: 4
2045 Default: 3
2052 Default: false
2063 Default:
2071 Default: 172800 (2 days)
2076 Default: 86400 (1 day)
2083 * 0 : system default
2086 Default: 0 (addresses are removed)
2094 Default: 600
2100 Default: 5
2108 Default: 16
2115 Default: FALSE (enable IPv6 operation)
2131 1 Enable DAD (default)
2143 Default: FALSE
2161 * 0 - (default): do nothing
2166 The IPv6 Traffic Class to use by default when sending IPv6 Neighbor
2173 * 0 - (default)
2179 Default: 10000 (10 seconds)
2185 Default: 1000 (1 second)
2188 * 0 - (default) No enforcement of a MLD version, MLDv1 fallback allowed
2196 * 1 - (default) discard fragmented neighbor discovery packets
2202 * 0: disabled (default)
2215 * 0: disabled (default)
2225 be stable privacy ones by default. This can be changed via the
2226 addrgenmode ip-link. conf/default/stable_secret is used as the
2233 By default the stable secret is unset.
2239 0 generate address based on EUI64 (default)
2251 By default this is turned off.
2258 By default this is turned off.
2268 Default: TRUE
2279 Default: 1000
2294 Default: 0-1,3-127 (rate limit ICMPv6 errors except Packet Too Big)
2300 Default: 0
2306 Default: 0
2312 Default: 0
2333 Default: 1
2339 Default: 1
2345 Default: 1
2351 Default: 0
2357 Default: 0
2369 Default: 0
2384 Default: 0
2403 Default: 1
2425 Default: 0
2445 Default: 0
2456 Default: 0
2465 Default: 1
2471 Default: 4
2478 Default: 10
2485 Default: 8
2493 Default: 5
2509 Default: 0
2518 is disabled by initializing 'ps_retrans' per netns as 0xffff by default,
2521 Default: 0xffff
2528 Default: 3000
2534 Default: 60000
2540 Default: 1000
2547 Default: 30000
2553 Default: 200
2556 The default lifetime of the SCTP cookie (in milliseconds). The cookie
2559 Default: 60000
2568 Default: 1
2583 Default: Dependent on configuration. MD5 if available, else SHA1 if
2600 Default: 0
2608 Default: 0
2621 Default is calculated at boot time from amount of available memory.
2623 sctp_rmem - vector of 3 INTEGERs: min, default, max
2624 Only the first value ("min") is used, "default" and "max" are
2631 Default: 4K
2633 sctp_wmem - vector of 3 INTEGERs: min, default, max
2634 Only the first value ("min") is used, "default" and "max" are
2641 Default: 4K
2651 Default: 1
2666 Default: 10