/* * Copyright (C) 2021 HiSilicon (Shanghai) Technologies CO., LIMITED. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifndef __WAL_HIPRIV_H__ #define __WAL_HIPRIV_H__ /* **************************************************************************** 1 其他头文件包含 **************************************************************************** */ #include "oal_ext_if.h" #include "hmac_ext_if.h" #include "wal_main.h" #include "mac_device.h" #ifdef __cplusplus #if __cplusplus extern "C" { #endif #endif /* **************************************************************************** 2 宏定义 **************************************************************************** */ /* 私有配置命令字符串最大长度，对应本地内存池一级大小 */ #define WAL_HIPRIV_CMD_MAX_LEN (WLAN_MEM_LOCAL_SIZE3 - 4) #define WAL_HIPRIV_CMD_NAME_MAX_LEN 36 /* 字符串中每个单词的最大长度 */ #if (_PRE_OS_VERSION_LINUX == _PRE_OS_VERSION) #define WAL_HIPRIV_PROC_ENTRY_NAME "hipriv" #endif #ifdef _PRE_WLAN_FEATURE_BW_HIEX #define WAL_HIPRIV_SELFCTS_DURATION_MAX 32 #define WAL_HIPRIV_SELFCTS_PER_MAX 1000 #endif #define WAL_HIPRIV_HT_MCS_MIN 0 #define WAL_HIPRIV_HT_MCS_MAX 7 #define WAL_HIPRIV_VHT_MCS_MIN 0 #define WAL_HIPRIV_VHT_MCS_MAX 9 #define WAL_HIPRIV_NSS_MIN 1 #define WAL_HIPRIV_NSS_MAX 4 #define WAL_HIPRIV_CH_NUM 4 #define WAL_HIPRIV_SNPRINTF_DST 10 #define WAL_HIPRIV_BOOL_NIM 0 #define WAL_HIPRIV_BOOL_MAX 1 #define WAL_HIPRIV_FREQ_SKEW_ARG_NUM 8 #define WAL_HIPRIV_MS_TO_S 1000 /* ms和s之间倍数差 */ #define WAL_HIPRIV_KEEPALIVE_INTERVAL_MIN 5000 /* 受默认老化计数器出发时间所限制 */ #define WAL_HIPRIV_KEEPALIVE_INTERVAL_MAX 0xffff /* timer间隔时间限制所致(oal_uin16) */ #define CAL_BAND_POWER_OFFSET_MAX 60 #define CAL_BAND_POWER_OFFSET_MIN -60 #define CAL_RATE_POWER_OFFSET_MAX 7 #define CAL_RATE_POWER_OFFSET_MIN -8 #define CAL_FREP_OFFSET_MAX 127 #define CAL_FREP_OFFSET_MIN -128 #ifdef _PRE_WLAN_FEATURE_MFG_TEST #define HI_WIFI_MODE_11BGN 0 #define HI_WIFI_MODE_11BG 1 #define HI_WIFI_MODE_11B 2 #endif #define HI_CCA_THRESHOLD_LO (-128) #define HI_CCA_THRESHOLD_HI 127 typedef hi_u32 (*wal_hipriv_cmd_func)(oal_net_device_stru *netdev, hi_char *pc_param); /* **************************************************************************** 3 枚举定义 **************************************************************************** */ /* 性能测试相关 */ typedef enum { WAL_ALWAYS_TX_DISABLE, /* 禁用常发 */ WAL_ALWAYS_TX_RF, /* 保留给RF测试广播报文 */ WAL_ALWAYS_TX_AMPDU_ENABLE, /* 使能AMPDU聚合包常发 */ WAL_ALWAYS_TX_MPDU, /* 使能非聚合包常发 */ WAL_ALWAYS_TX_DC, /* 使能DC常发,用于CE认证测频偏 */ WAL_ALWAYS_TX_BUTT } wal_device_always_tx_state_enum; /* **************************************************************************** 4 全局变量声明 **************************************************************************** */ /* **************************************************************************** 5 消息头定义 **************************************************************************** */ /* **************************************************************************** 6 消息定义 **************************************************************************** */ /* **************************************************************************** 7 STRUCT定义 **************************************************************************** */ /* 私有命令入口结构定义 */ typedef struct { hi_char *pc_cmd_name; /* 命令字符串 */ wal_hipriv_cmd_func func; /* 命令对应处理函数 */ } wal_hipriv_cmd_entry_stru; /* 算法参数配置结构体 */ typedef struct { hi_char *pc_name; /* 配置命令字符串 */ mac_alg_cfg_enum_uint8 alg_cfg; /* 配置命令对应的枚举值 */ hi_u8 auc_resv[3]; /* 3: 字节对齐 */ } wal_ioctl_alg_cfg_stru; /* TPC工作模式 */ typedef enum { ALG_TPC_MODE_DISABLE = 0, /* 禁用TPC模式: 直接采用RF配置的功率增益 */ ALG_TPC_MODE_FIX_POWER = 1, /* 固定功率模式: 数据帧的Data0采用配置的, Data1~3以及管理帧、控制帧都用最大功率 */ /* 自适应功率模式: 数据帧的Data0采用自适应功率, Data1~3以及管理帧、控制帧都用最大功率 */ ALG_TPC_MODE_ADAPT_POWER = 2, ALG_TPC_MODE_BUTT } alg_tpc_mode_enum; typedef hi_u8 alg_tpc_mode_enum_uint8; /* **************************************************************************** 8 UNION定义 **************************************************************************** */ /* **************************************************************************** 9 OTHERS定义 **************************************************************************** */ /* **************************************************************************** 10 函数声明 **************************************************************************** */ hi_u32 wal_hipriv_set_rate(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_mcs(oal_net_device_stru *netdev, hi_char *pc_param); #if (_PRE_OS_VERSION_LINUX == _PRE_OS_VERSION) #ifdef _PRE_CONFIG_CONN_HISI_SYSFS_SUPPORT hi_u32 wal_hipriv_create_proc(hi_void *proc_arg); #endif #endif hi_u32 wal_hipriv_del_vap(oal_net_device_stru *netdev); #ifdef _PRE_WLAN_FEATURE_HIPRIV hi_u32 wal_hipriv_vap_info(oal_net_device_stru *netdev, hi_char *pc_param); #endif #if (_PRE_OS_VERSION_LINUX == _PRE_OS_VERSION) #ifdef _PRE_CONFIG_CONN_HISI_SYSFS_SUPPORT hi_u32 wal_hipriv_remove_proc(hi_void); #endif #endif hi_u32 wal_hipriv_get_mac_addr(const hi_char *pc_param, hi_u8 mac_addr[], hi_u8 addr_len, hi_u32 *pul_total_offset); hi_u32 wal_hipriv_get_bw(oal_net_device_stru *netdev, hal_channel_assemble_enum_uint8 *pen_bw_index); hi_u32 wal_hipriv_set_bw(oal_net_device_stru *netdev, hi_char *pc_param); #ifdef _PRE_WLAN_FEATURE_HIPRIV hi_u32 wal_hipriv_reg_write(oal_net_device_stru *netdev, hi_char *pc_param); #endif hi_u32 wal_hipriv_getcountry(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_vap_state(oal_net_device_stru *netdev, hi_char *pc_param); #ifdef _PRE_WLAN_FEATURE_MESH hi_u32 wal_hipriv_get_mesh_node_info(oal_net_device_stru *netdev, hi_char *pc_param); #endif #ifdef _PRE_WLAN_FEATURE_STA_PM hi_u32 wal_hipriv_sta_pm_on(oal_net_device_stru *netdev, const hi_char *pc_param); #if defined(_PRE_WLAN_FEATURE_HIPRIV) || defined(_PRE_WLAN_FEATURE_SIGMA) hi_u32 wal_hipriv_set_uapsd_cap(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_uapsd_para(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_uapsd_cap(oal_net_device_stru *netdev, hi_char *pc_param); #endif #ifdef _PRE_WLAN_FEATURE_HIPRIV hi_u32 wal_hipriv_sta_set_psm_offset(oal_net_device_stru *netdev, hi_char *param); hi_u32 wal_hipriv_sta_set_offload_param(oal_net_device_stru *netdev, hi_char *param); hi_u32 wal_hipriv_sta_set_hw_ps_mode(oal_net_device_stru *netdev, hi_char *param); hi_u32 wal_hipriv_set_pm_switch(oal_net_device_stru *netdev, hi_char *pc_param); #endif #endif #if defined _PRE_WLAN_FEATURE_SIGMA hi_u32 wal_hipriv_rts_threshold(oal_net_device_stru *netdev, hi_char *pc_param); #endif #if defined(_PRE_WLAN_FEATURE_HIPRIV) || defined(_PRE_WLAN_FEATURE_SIGMA) hi_u32 wal_hipriv_frag_threshold(oal_net_device_stru *netdev, hi_char *pc_param); #endif hi_u32 wal_hipriv_setcountry(oal_net_device_stru *netdev, hi_char *pc_param); #if defined(_PRE_WLAN_FEATURE_HIPRIV) || defined(_PRE_WLAN_FEATURE_SIGMA) hi_u32 wal_hipriv_ampdu_tx_on(oal_net_device_stru *netdev, hi_char *pc_param); #endif #if defined(_PRE_WLAN_FEATURE_HIPRIV) || defined(_PRE_WLAN_FEATURE_SIGMA) hi_u32 wal_hipriv_set_shortgi20(oal_net_device_stru *netdev, hi_char *pc_param); #endif #if defined _PRE_WLAN_FEATURE_SIGMA hi_u32 wal_hipriv_set_stbc_cap(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_addba_req(oal_net_device_stru *netdev, hi_char *pc_param); #endif #if defined(_PRE_WLAN_FEATURE_HIPRIV) || defined(_PRE_WLAN_FEATURE_SIGMA) hi_u32 wal_hipriv_entry(const hi_char *pc_buffer, hi_u32 count); #endif hi_u32 wal_hipriv_tx_proc(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_rx_proc(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_rx_fcs_info(oal_net_device_stru *netdev, hi_char *pc_param); #ifdef _PRE_WLAN_FEATURE_HIPRIV hi_u32 wal_hipriv_user_info(oal_net_device_stru *netdev, hi_char *pc_param); #endif hi_u32 wal_hipriv_get_netdev(const hi_char *pc_cmd, oal_net_device_stru **netdev, hi_u32 *pul_off_set); hi_u32 wal_hipriv_always_tx(oal_net_device_stru *netdev, hi_u8 tx_flag); hi_u32 wal_hipriv_always_rx(oal_net_device_stru *netdev, hi_u8 rx_flag, hi_u8 mac_filter_flag); #ifdef _PRE_WLAN_FEATURE_HIPRIV hi_u32 wal_hipriv_get_cal_data(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_cal_band_power(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_cal_rate_power(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_rate_power(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_cal_freq_power(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_dataefuse(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_set_customer_mac(oal_net_device_stru *netdev, hi_char *pc_param); hi_u32 wal_hipriv_get_customer_mac(oal_net_device_stru *netdev, hi_char *pc_param); #endif hi_u32 hi_hipriv_set_tx_pwr_offset(oal_net_device_stru *netdev, hi_char *pc_param); #ifdef _PRE_WLAN_FEATURE_WOW hi_u32 wal_get_add_wow_pattern_param(hi_u8 index, hi_char *pattern, hmac_cfg_wow_pattern_param_stru *cfg_wow_param); #endif hi_bool is_under_ps(hi_void); hi_void set_under_ps(hi_bool under_ps); hi_void set_under_mfg(hi_u32 under_mfg); #ifdef __cplusplus #if __cplusplus } #endif #endif #endif /* end of wal_hipriv.h */