/*
 * Copyright (c) 2021-2024 Huawei Device Co., Ltd.
 * Licensed under the Apache License, Version 2.0 (the "License"),
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * @file
 * @kit BasicServicesKit
 */

import { AsyncCallback } from './@ohos.base';

/**
 * @namespace zlib
 * @syscap SystemCapability.BundleManager.Zlib
 * @since 7
 */
/**
 * @namespace zlib
 * @syscap SystemCapability.BundleManager.Zlib
 * @atomicservice
 * @since 11
 */
/**
 * @namespace zlib
 * @syscap SystemCapability.BundleManager.Zlib
 * @crossplatform
 * @atomicservice
 * @since 12
 */
declare namespace zlib {
  /**
   * ErrorCode
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   * @deprecated since 9
   */
  export enum ErrorCode {
    /**
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     * @deprecated since 9
     */
    ERROR_CODE_OK = 0,
    /**
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     * @deprecated since 9
     */
    ERROR_CODE_ERRNO = -1
  }

  /**
   * CompressLevel
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   */
  /**
   * CompressLevel
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  export enum CompressLevel {
    /**
     * Indicates the no compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the no compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_LEVEL_NO_COMPRESSION = 0,
    /**
     * Indicates the best speed mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the best speed mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_LEVEL_BEST_SPEED = 1,
    /**
     * Indicates the best compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the best compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_LEVEL_BEST_COMPRESSION = 9,
    /**
     * Indicates the default compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the default compression mode.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_LEVEL_DEFAULT_COMPRESSION = -1
  }

  /**
   * CompressStrategy
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   */
  /**
   * CompressStrategy
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  export enum CompressStrategy {
    /**
     * Indicates the default strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the default strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_STRATEGY_DEFAULT_STRATEGY = 0,
    /**
     * Indicates the filtered strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the filtered strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_STRATEGY_FILTERED = 1,
    /**
     * Indicates the huffman-only strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the huffman-only strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_STRATEGY_HUFFMAN_ONLY = 2,
    /**
     * Indicates the RLE strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the RLE strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_STRATEGY_RLE = 3,
    /**
     * Indicates the fixed strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the fixed strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    COMPRESS_STRATEGY_FIXED = 4
  }

  /**
   * MemLevel
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   */
  /**
   * MemLevel
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  export enum MemLevel {
    /**
     * Uses the least amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Uses the least amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    MEM_LEVEL_MIN = 1,
    /**
     * Uses the maximum amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Uses the maximum amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    MEM_LEVEL_MAX = 9,
    /**
     * Uses the default amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Uses the default amount of memory.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    MEM_LEVEL_DEFAULT = 8
  }

  /**
   * CompressFlushMode
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  export enum CompressFlushMode {
    /**
     * Default value, indicating normal operation.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    NO_FLUSH = 0,
    /**
     * Generate partial refresh points in compressed streams.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    PARTIAL_FLUSH = 1,
    /**
     * Force output of all compressed data while maintaining the compressed stream state.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    SYNC_FLUSH = 2,
    /**
     * the compression state is reset.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    FULL_FLUSH = 3,
    /**
     * The compression or decompression process ends.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    FINISH = 4,
    /**
     * Allow for finer grained control.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    BLOCK = 5,
    /**
     * There are special purposes in implementation.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    TREES = 6
  }

  /**
   * Return codes for the compression/decompression functions.
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  export enum ReturnStatus {
    /**
     * Indicates success.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    OK = 0,
    /**
     * Indicates that the entire data has been processed.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    STREAM_END = 1,
    /**
     * Indicates preset dictionary is required to continue decompression.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    NEED_DICT = 2,
  }

  /**
   * The deflate compression method (the only one supported in this version).
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  export enum CompressMethod {
    /**
     * Compression method.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    DEFLATED = 8,
  }

  /**
   * Define the reference point for offset.
   *
   * @enum { number }
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  export enum OffsetReferencePoint {
    /**
     * Seek from beginning of file.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    SEEK_SET = 0,

    /**
     * Seek from current position.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    SEEK_CUR = 1,
  }

  /**
   * Defines compress or decompress options.
   *
   * @typedef Options
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   */
  /**
   * Defines compress or decompress options.
   *
   * @typedef Options
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  interface Options {
    /**
     * Indicates the compress level.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the compress level.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    level?: CompressLevel;
    /**
     * Indicates the memory level.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the memory level.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    memLevel?: MemLevel;
    /**
     * Indicates the compress strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @since 7
     */
    /**
     * Indicates the compress strategy.
     *
     * @syscap SystemCapability.BundleManager.Zlib
     * @crossplatform
     * @atomicservice
     * @since 11
     */
    strategy?: CompressStrategy;
  }

  /**
   * Process all the information required for compression and decompression.
   *
   * @typedef ZStream
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface ZStream {
    /**
     * Next input byte.
     *
     * @type { ?ArrayBuffer }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    nextIn?: ArrayBuffer;

    /**
     * Number of bytes available at nextIn.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    availableIn?: number;

    /**
     * Total number of input bytes read so far.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    totalIn?: number;

    /**
     * Next output byte will go here.
     *
     * @type { ?ArrayBuffer }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    nextOut?: ArrayBuffer;

    /**
     * Remaining free space at nextOut.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    availableOut?: number;

    /**
     * Total number of bytes output so far.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    totalOut?: number;

    /**
     * Best guess about the data type.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    dataType?: number;

    /**
     * Adler-32 or CRC-32 value of the uncompressed data.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    adler?: number;
  }

  /**
   * Gzip header information passed to and from zlib routines.
   *
   * @typedef GzHeader
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface GzHeader {
    /**
     * True if compressed data believed to be text.
     *
     * @type { ?boolean }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    isText?: boolean;

    /**
     * Operating system.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    os?: number;

    /**
     * Modification time.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    time?: number;

    /**
     * Extra flags.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    xflags?: number;

    /**
     * Extra field.
     *
     * @type { ?ArrayBuffer }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    extra?: ArrayBuffer;

    /**
     * Extra field length.
     *
     * @type { ?number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    extraLen?: number;

    /**
     * Zero-terminated file name.
     *
     * @type { ?ArrayBuffer }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    name?: ArrayBuffer;

    /**
     * Zero-terminated comment.
     *
     * @type { ?ArrayBuffer }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    comment?: ArrayBuffer;

    /**
     * True if there was or will be a header crc
     *
     * @type { ?boolean }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    hcrc?: boolean;

    /**
     * True when done reading gzip header.
     *
     * @type { ?boolean }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    done?: boolean;
  }

  /**
   * Compression and decompression return value information.
   *
   * @typedef ZipOutputInfo
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface ZipOutputInfo {
    /**
     * ReturnStatus the specific meaning is defined as enum.
     *
     * @type { ReturnStatus }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    status: ReturnStatus

    /**
     * Total sizeof the destination buffer.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    destLen: number
  }

  /**
   * InflateGetDictionary and deflateGetDictionary return value information.
   *
   * @typedef DictionaryOutputInfo
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface DictionaryOutputInfo {
    /**
     * ReturnStatus the specific meaning is defined as enum.
     *
     * @type { ReturnStatus }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    status: ReturnStatus

    /**
     * Return dictionary length.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    dictionaryLength: number
  }

  /**
   * Uncompress2 return value information.
   *
   * @typedef DecompressionOutputInfo
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface DecompressionOutputInfo {
    /**
     * ReturnStatus the specific meaning is defined as enum.
     *
     * @type { ReturnStatus }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    status: ReturnStatus

    /**
     * Total sizeof the destination buffer.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    destLength: number

    /**
     * Total sizeof the sourceLen.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    sourceLength: number
  }

  /**
   * DeflatePending return value information.
   *
   * @typedef DeflatePendingOutputInfo
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface DeflatePendingOutputInfo {
    /**
     * ReturnStatus the specific meaning is defined as enum.
     *
     * @type { ReturnStatus }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    status: ReturnStatus

    /**
     * The number of bytes of output that have been generated.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    pending: number

    /**
     * The number of bits of output that have been generated.
     *
     * @type { number }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    bits: number
  }

  /**
   * GzError return value information.
   *
   * @typedef GzErrorOutputInfo
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface GzErrorOutputInfo {
    /**
     * Return Zlib status ReturnStatus the specific meaning is defined as enum.
     *
     * @type { ReturnStatus }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    status: ReturnStatus

    /**
     * The status message for the last status which occurred on file.
     *
     * @type { string }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    statusMsg: string
  }

  /**
   * A callback function for reading input data provided by a user. When the decompression process requires more input data,
   * zlib will call this function. This function should read data from the data source to the buffer.
   *
   * @typedef { function }
   * @param { object } inDesc - A universal user-defined data object.
   * The specific type and content depend on the actual application scenario, which can include configuration data, file handles, etc.
   * @returns { ArrayBuffer } Return the buffer successfully read by the data source through the input descriptor.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  type InflateBackInputCallback = (inDesc: object) => ArrayBuffer;

  /**
   * The output data provided by the user is written into the callback function. Whenever decompressed data is ready for output,
   * zlib calls this function to write the data from the buffer to the target location.
   *
   * @typedef { function }
   * @param { object } outDesc - Object passed to output function. Object dependency requirement implementation.
   * @param { ArrayBuffer } buf - Used to store data to be written.
   * @param { number } length - Write the length of the output buffer.
   * @returns { number } Return the number of bytes output.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  type InflateBackOutputCallback = (outDesc: object, buf: ArrayBuffer, length: number) => number;

  /**
   * Compress the specified file.
   *
   * @param { string } inFile Indicates the path of the file to be compressed.
   * @param { string } outFile Indicates the path of the output compressed file.
   * @param { Options } options
   * @returns { Promise<void> }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   * @deprecated since 9
   * @useinstead ohos.zlib#compressFile
   */
  function zipFile(inFile: string, outFile: string, options: Options): Promise<void>;

  /**
   * Decompress the specified file.
   *
   * @param { string } inFile Indicates the path of the file to be decompressed.
   * @param { string } outFile Indicates the path of the decompressed file.
   * @param { Options } options
   * @returns { Promise<void> }
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 7
   * @deprecated since 9
   * @useinstead ohos.zlib#decompressFile
   */
  function unzipFile(inFile: string, outFile: string, options: Options): Promise<void>;

  /**
   * Compress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be compressed.
   * @param { string } outFile - Indicates the path of the output compressed file.
   * @param { Options } options - Indicates the options of compressing file.
   * @param { AsyncCallback<void> } callback - The callback of compressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 9
   */
  /**
   * Compress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be compressed.
   * @param { string } outFile - Indicates the path of the output compressed file.
   * @param { Options } options - Indicates the options of compressing file.
   * @param { AsyncCallback<void> } callback - The callback of compressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  function compressFile(inFile: string, outFile: string, options: Options, callback: AsyncCallback<void>): void;

  /**
   * Compress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be compressed.
   * @param { string } outFile - Indicates the path of the output compressed file.
   * @param { Options } options - Indicates the options of compressing file.
   * @returns { Promise<void> } Returns the result of compressFile file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 9
   */
  /**
   * Compress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be compressed.
   * @param { string } outFile - Indicates the path of the output compressed file.
   * @param { Options } options - Indicates the options of compressing file.
   * @returns { Promise<void> } Returns the result of compressFile file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  function compressFile(inFile: string, outFile: string, options: Options): Promise<void>;

  /**
   * Compress the specified multiple files.
   *
   * @param { Array<string> } inFiles - Indicates the files to be compressed.
   * @param { string } outFile - Indicates the path of the output compressed file.
   * @param { Options } options - Indicates the options of compressing file.
   * @returns { Promise<void> } Returns the result of compressFile file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function compressFiles(inFiles: Array<string>, outFile: string, options: Options): Promise<void>;

  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressed file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @param { AsyncCallback<void> } callback - The callback of decompressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 9
   */
  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressed file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @param { AsyncCallback<void> } callback - The callback of decompressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 10
   */
  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressed file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @param { AsyncCallback<void> } callback - The callback of decompressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  function decompressFile(inFile: string, outFile: string, options: Options, callback: AsyncCallback<void>): void;

  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressed file.
   * @param { AsyncCallback<void> } callback - The callback of decompressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 10
   */
  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressed file.
   * @param { AsyncCallback<void> } callback - The callback of decompressing file result.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  function decompressFile(inFile: string, outFile: string, callback: AsyncCallback<void>): void;

  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressing file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @returns { Promise<void> } Returns the result of decompressing file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 9
   */
  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressing file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @returns { Promise<void> } Returns the result of decompressing file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @since 10
   */
  /**
   * Decompress the specified file.
   *
   * @param { string } inFile - Indicates the path of the file to be decompressed.
   * @param { string } outFile - Indicates the path of the output decompressing file.
   * @param { Options } options - Indicates the options of decompressing file.
   * @returns { Promise<void> } Returns the result of decompressing file.
   * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900002 - The input destination file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 11
   */
  function decompressFile(inFile: string, outFile: string, options?: Options): Promise<void>;
  
  /**
   * Get the original size of the compressed zip file, the size is the meta data stored in zip file.
   *
   * @param { string } compressedFile - Indicates the path of the compressed file.
   * @returns { Promise<number> } Returns the original size of the compressed file.
   * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified; 2. Incorrect parameter types.
   * @throws { BusinessError } 900001 - The input source file is invalid.
   * @throws { BusinessError } 900003 - The input source file is not ZIP format or damaged.
   * @syscap SystemCapability.BundleManager.Zlib
   * @crossplatform
   * @atomicservice
   * @since 12
   */
  function getOriginalSize(compressedFile: string): Promise<number>;

  /**
   * Asynchronous creation of verification objects.
   *
   * @returns { Promise<Checksum> } Returns verification objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createChecksum(): Promise<Checksum>;
 
  /**
   * Synchronize creation of verification objects.
   *
   * @returns { Checksum } Returns verification objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createChecksumSync(): Checksum;
 
  /**
   * Asynchronous creation of zip objects.
   *
   * @returns { Promise<Zip> } Returns zip objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createZip(): Promise<Zip>;

  /**
   * Synchronize creation of zip objects.
   *
   * @returns { Zip } Returns zip objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createZipSync(): Zip;

  /**
   * Synchronize creation of gzip objects.
   *
   * @returns { Promise<GZip> } Returns zip objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createGZip(): Promise<GZip>;

  /**
   * Synchronize creation of gzip objects.
   *
   * @returns { GZip } Returns zip objects.
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  function createGZipSync(): GZip;

  /**
   * Calculate Adler-32 and CRC-32 checksum.
   *
   * @typedef Checksum
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface Checksum {
    /**
     * Update a running Adler-32 checksum with the bytes buf.
     *
     * @param { number } adler - Initial value of Adler32 checksum.
     * @param { ArrayBuffer } buf - Calculate checksum data buffer.
     * @returns { Promise<number> } Return the updated checksum.
     * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    adler32(adler: number, buf: ArrayBuffer): Promise<number>;
 
    /**
     * Combine two Adler-32 checksum into one.
     *
     * @param { number } adler1 - The first Adler32 checksum.
     * @param { number } adler2 - The second Adler32 checksum.
     * @param { number } len2 - The length of the data block associated with the second Adler32 checksum.
     * @returns { Promise<number> } Returns the Adler-32 checksum.
     * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    adler32Combine(adler1: number, adler2: number, len2: number): Promise<number>;
 
    /**
     * Update a running CRC-32 with the bytes buf.
     *
     * @param { number } crc - Initial value of CRC-32 checksum.
     * @param { ArrayBuffer } buf - Calculate checksum data buffer.
     * @returns { Promise<number> } Return the updated CRC-32.
     * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    crc32(crc: number, buf: ArrayBuffer): Promise<number>;
 
    /**
     * Combine two CRC-32 check values into one.
     *
     * @param { number } crc1 - The first CRC-32 checksum.
     * @param { number } crc2 - The second CRC-32 checksum.
     * @param { number } len2 - The length of the data block associated with the second CRC-32 checksum.
     * @returns { Promise<number> } Returns the CRC-32 check value.
     * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    crc32Combine(crc1: number, crc2: number, len2: number): Promise<number>;
 
    /**
     * Update a running CRC-64 with the bytes buf.
     *
     * @param { number } crc - Initial value of CRC-64 checksum.
     * @param { ArrayBuffer } buf - Calculate checksum data buffer.
     * @returns { Promise<number> } Return the updated CRC-64.
     * @throws { BusinessError } 401 - Parameter error. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    crc64(crc: number, buf: ArrayBuffer): Promise<number>;
 
    /**
     * Get CRC-32 table.
     *
     * @returns { Promise<Array<number>> } Return a array to the CRC-32 table.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    getCrcTable(): Promise<Array<number>>;
 
    /**
     * Get CRC-64 table.
     *
     * @returns { Promise<Array<number>> } Return a array to the CRC-64 table.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    getCrc64Table(): Promise<Array<number>>;
  }

  /**
   * Deflate and inflate interface.
   *
   * @typedef Zip
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface Zip {
    /**
     * Get ZStream.
     *
     * @returns { Promise<ZStream> } Return the required ZStream for compression or decompression.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    getZStream(): Promise<ZStream>;

    /**
     * Get the version information of the current linked zlib library.
     *
     * @returns { Promise<string> } Returns a specific version number string constant containing the zlib library.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    zlibVersion(): Promise<string>;

    /**
     * Return flags indicating compile-time options.
     *
     * @returns { Promise<number> } Return flags indicating compile-time options.
     * Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
     * 1.0: size of uInt.
     * 3.2: size of uLong.
     * 5.4: size of voidpf (pointer).
     * 7.6: size of z_off_t.
     * Compiler, assembler, and debug options:
     * 8: ZLIB_DEBUG.
     * 9: ASMV or ASMINF -- use ASM code.
     * 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention.
     * 11: 0 (reserved).
     * One-time table building (smaller code, but not thread-safe if true):
     * 12: BUILDFIXED -- build static block decoding tables when needed.
     * 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed.
     * 14,15: 0 (reserved).
     * Library content (indicates missing functionality):
     * 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking deflate code when not needed).
     * 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect and decode gzip streams (to avoid linking crc code).
     * 18-19: 0 (reserved).
     * Operation variations (changes in library functionality):
     * 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate.
     * 21: FASTEST -- deflate algorithm with only one, lowest compression level.
     * 22,23: 0 (reserved).
     * The sprintf variant used by gzprintf (zero is best):
     * 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format.
     * 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure.
     * 26: 0 = returns value, 1 = void -- 1 means inferred string length returned.
     * Remainder:
     * 27-31: 0 (reserved).
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    zlibCompileFlags(): Promise<number>;

    /**
     * Compresses the source buffer into the destination buffer.
     *
     * @param { ArrayBuffer } dest - Destination buffer.
     * @param { ArrayBuffer } source - Source data buffer.
     * @param { number } sourceLen - Source data length.
     * @returns { Promise<ZipOutputInfo> } Return ReturnStatus and total sizeof the destination buffer.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    compress(dest: ArrayBuffer, source: ArrayBuffer, sourceLen?: number): Promise<ZipOutputInfo>;

    /**
     * Compresses the source buffer into the destination buffer.
     *
     * @param { ArrayBuffer } dest - Destination buffer.
     * @param { ArrayBuffer } source - Source data buffer.
     * @param { CompressLevel } level - Compression level.
     * @param { number } sourceLen - Source data length.
     * @returns { Promise<ZipOutputInfo> } Return ReturnStatus and total sizeof the destination buffer.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    compress2(dest: ArrayBuffer, source: ArrayBuffer, level: CompressLevel, sourceLen?: number,): Promise<ZipOutputInfo>;

    /**
     * Calculate the upper limit of the return compression size.
     *
     * @param { number } sourceLen - The length of the source data.
     * @returns { Promise<number> } Returns an upper bound on the compressed size after.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    compressBound(sourceLen: number): Promise<number>;

    /**
     * Decompress the compressed data into its original uncompressed form.
     *
     * @param { ArrayBuffer } dest - Destination buffer.
     * @param { ArrayBuffer } source - Source data buffer.
     * @param { number } sourceLen - Source data length.
     * @returns { Promise<ZipOutputInfo> } Return ReturnStatus and total sizeof the destination buffer.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800005 - Data error.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    uncompress(dest:ArrayBuffer, source: ArrayBuffer, sourceLen?: number): Promise<ZipOutputInfo>;

    /**
     * Decompress the compressed data into its original uncompressed form.
     *
     * @param { ArrayBuffer } dest - Destination buffer.
     * @param { ArrayBuffer } source - Source data buffer.
     * @param { number } sourceLen - Source data length.
     * @returns { Promise<DecompressionOutputInfo> } Return ReturnStatus and total sizeof the destination buffer and total sizeof the sourceLen.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800005 - Data error.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    uncompress2(dest: ArrayBuffer, source: ArrayBuffer, sourceLen?: number): Promise<DecompressionOutputInfo>;

    /**
     * Verify the checksum inside the structure of compressed stream z_stream.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } check - Expected checksum.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateValidate(strm: ZStream, check: number): Promise<ReturnStatus>;

    /**
     * Find a synchronization point for the current decompressed stream.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateSyncPoint(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Skips invalid compressed data until a possible full flush point can be found.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800005 - Data error.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateSync(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Initializes the decompression dictionary from the given uncompressed byte sequence.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { ArrayBuffer } dictionary - Dictionary data.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800005 - Data error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateSetDictionary(strm: ZStream, dictionary: ArrayBuffer): Promise<ReturnStatus>;

    /**
     * Reset the state of the decompressed stream to retain the allocated Huffman decoding tree and preset dictionary.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateResetKeep(strm: ZStream): Promise<ReturnStatus>;

    /**
     * This function is equivalent to inflateEnd followed by inflateInit, but does not free and reallocate the internal decompression state.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } windowBits - Parameter is interpreted the same as it is for inflateInit2.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateReset2(strm: ZStream, windowBits: number): Promise<ReturnStatus>;

    /**
     * This function is equivalent to inflateEnd followed by inflateInit, but does not free and reallocate the internal decompression state.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateReset(strm: ZStream): Promise<ReturnStatus>;

    /**
     * This function inserts bits in the inflate input stream.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } bits - The provided bits.
     * @param { number } value - The provided value.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflatePrime(strm: ZStream, bits: number, value: number): Promise<ReturnStatus>;

    /**
     * Is used to mark locations in the input data for random access.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<number> } Return the internal marker position of the current decompressed stream.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateMark(strm: ZStream): Promise<number>;

    /**
     * Initializes the internal stream state for decompression.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } windowBits - Is the base two logarithm of the maximum window size.
     * It should be in the range 8..15 for this version of the library. The default value is 15 if inflateInit is used instead.
     * windowBits must be greater than or equal to the windowBits value provided to deflateInit2() while compressing,
     * or it must be equal to 15 if deflateInit2() was not used. If a compressed stream with a larger window size is given as input,
     * inflate() will return with the error code Z_DATA_ERROR instead of trying to allocate a larger window.
     * WindowBits can also be zero to request that inflate use the window size in the zlib header of the compressed stream.
     * WindowBits can also be -8..-15 for raw inflate. In this case, -windowBits determines the window size.
     * inflate() will then process raw deflate data, not looking for a zlib or gzip header,
     * not generating a check value, and not looking for any check values for comparison at the end of the stream.
     * This is for use with other formats that use the deflate compressed data format such as zip. Those formats provide their own check values.
     * If a custom format is developed using the raw deflate format for compressed data, it is recommended that a check value such as an Adler-32 or
     * a CRC-32 be applied to the uncompressed data as is done in the zlib, gzip, and zip formats. For most applications,
     * the zlib format should be used as is. Note that comments above on the use in deflateInit2() applies to the magnitude of windowBits.WindowBits
     * can also be greater than 15 for optional gzip decoding. Add 32 to windowBits to enable zlib and gzip decoding with automatic header detection,
     * or add 16 to decode only the gzip format. If a gzip stream is being decoded, strm->adler is a CRC-32 instead of an Adler-32.
     * Unlike the gunzip utility and gzread(), inflate() will *not* automatically decode concatenated gzip members. Inflate() will return
     * Z_STREAM_END at the end of the gzip member. The state would need to be reset to continue decoding a subsequent gzip member.
     * This *must* be done if there is more data after a gzip member, in order for the decompression to be compliant with the gzip standard.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateInit2(strm: ZStream, windowBits: number): Promise<ReturnStatus>;

    /**
     * Initializes the internal stream state for decompression.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateInit(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Requests that gzip header information be stored in the provided gz_header structure.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { GzHeader } header - Receive gzip header information extracted from compressed data stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateGetHeader(strm: ZStream, header: GzHeader): Promise<ReturnStatus>;

    /**
     * Obtain the current dictionary content of the decompressed stream.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { ArrayBuffer } dictionary - The sliding dictionary being maintained by inflate.
     * @returns { Promise<DictionaryOutputInfo> } Return ReturnStatus and dictionary length.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateGetDictionary(strm: ZStream, dictionary: ArrayBuffer): Promise<DictionaryOutputInfo>;

    /**
     * All dynamically allocated data structures for this stream are freed.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateEnd(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Sets the destination stream as a complete copy of the source stream.
     *
     * @param { Zip } source - The status information of the current decompression process.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateCopy(source: Zip): Promise<ReturnStatus>;

    /**
     * Obtain the number of Huffman encoding trees that have been used in the current decompression stream during the inflate process.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<number> } Return the number of used Huffman encoding trees.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateCodesUsed(strm: ZStream): Promise<number>;

    /**
     * Initialize the internal stream state for decompression using inflateBack() calls.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } windowBits - Parameter is interpreted the same as it is for inflateInit2. The value range is between 8~15.
     * @param { ArrayBuffer } window - The preset sliding window buffer.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateBackInit(strm: ZStream, windowBits: number, window: ArrayBuffer): Promise<ReturnStatus>;

    /**
     * All memory allocated by inflateBackInit() is freed.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateBackEnd(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Does a raw inflate with a single call using a call-back interface for input and output.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { InflateBackInputCallback } backIn - A function that decompresses data from the end to read the raw compressed data from the input source.
     * @param { object } inDesc - Universal object.
     * @param { InflateBackOutputCallback } backOut - Write the decompressed data to the target output.
     * @param { object } outDesc - Universal object.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflateBack(strm: ZStream, backIn: InflateBackInputCallback, inDesc: object, backOut: InflateBackOutputCallback, outDesc: object): Promise<ReturnStatus>;

    /**
     * Decompresses as much data as possible, and stops when the input buffer becomes empty or the output buffer becomes full.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { CompressFlushMode } flush - The behavior pattern of compression operation.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800005 - Data error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    inflate(strm: ZStream, flush: CompressFlushMode): Promise<ReturnStatus>;

    /**
     * Initializes the internal stream state for compression.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { CompressLevel } level - Compression level.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateInit(strm: ZStream, level: CompressLevel): Promise<ReturnStatus>;

    /**
     * Initializes the internal stream state for compression.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { CompressLevel } level - Compression level.
     * @param { CompressMethod } method - The compression method.
     * @param { number } windowBits - Parameter is interpreted the same as it is for inflateInit2.
     * @param { MemLevel } memLevel - The memory usage level.
     * @param { CompressStrategy } strategy - The compression strategy.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateInit2(strm: ZStream, level: CompressLevel, method: CompressMethod, windowBits: number, memLevel: MemLevel, strategy: CompressStrategy): Promise<ReturnStatus>;

    /**
     * Compresses as much data as possible, and stops when the input buffer becomes empty or the output buffer becomes full.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { CompressFlushMode } flush - The behavior pattern of compression operation.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800007 - Buffer error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflate(strm: ZStream, flush: CompressFlushMode): Promise<ReturnStatus>;

    /**
     * All dynamically allocated data structures for this stream are freed.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateEnd(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Calculate an upper bound on the compressed size.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } sourceLength - The length of uncompressed data.
     * @returns { Promise<number> } Return an upper bound on the compressed size.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateBound(strm: ZStream, sourceLength: number): Promise<number>;

    /**
     * Provides gzip header information for when a gzip stream is requested by deflateInit2().
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { GzHeader } head - Object a to gz_headerp that already has gzip header information.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateSetHeader(strm: ZStream, head: GzHeader): Promise<ReturnStatus>;

    /**
     * Sets the destination stream as a complete copy of the source stream.
     *
     * @param { Zip } source - Object to source z_stream structure.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateCopy(source: Zip): Promise<ReturnStatus>;

    /**
     * Initializes the compression dictionary from the given byte sequence without producing any compressed output.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { ArrayBuffer } dictionary - Object a to gz_headerp that already has gzip header information.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateSetDictionary(strm: ZStream, dictionary: ArrayBuffer): Promise<ReturnStatus>;

    /**
     * Returns the sliding dictionary being maintained by deflate.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { ArrayBuffer } dictionary - The sliding dictionary being maintained by deflate.
     * @returns { Promise<DictionaryOutputInfo> } Return ReturnStatus and dictionary length
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateGetDictionary(strm: ZStream, dictionary: ArrayBuffer): Promise<DictionaryOutputInfo>;

    /**
     * Fine tune deflate's internal compression parameters.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } goodLength - Good matching length threshold.
     * @param { number } maxLazy - Maximum lazy matching times.
     * @param { number } niceLength - Good Lazy Length Threshold.
     * @param { number } maxChain - Maximum chain length.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateTune(strm: ZStream, goodLength: number, maxLazy: number, niceLength: number, maxChain: number): Promise<ReturnStatus>;

    /**
     * This function is equivalent to deflateEnd followed by deflateInit, but does not free and reallocate the internal compression state.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateReset(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Reset the initialized deflate compressed stream, but retain its set compression parameters and dictionary.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateResetKeep(strm: ZStream): Promise<ReturnStatus>;

    /**
     * Returns the number of bytes and bits of output that have been generated, but not yet provided in the available output.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @returns { Promise<DeflatePendingOutputInfo> } Return ReturnStatus along with the number of bytes and bits generated.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflatePending(strm: ZStream): Promise<DeflatePendingOutputInfo>;

    /**
     * Dynamically update the compression level and compression strategy.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { CompressLevel } level - New compression level.
     * @param { CompressStrategy } strategy - New compression strategy.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflateParams(strm: ZStream, level: CompressLevel, strategy: CompressStrategy): Promise<ReturnStatus>;

    /**
     * Inserts bits in the deflate output stream.
     *
     * @param { ZStream } strm - Object to structure z_stream.
     * @param { number } bits - The number of bits to be inserted. The value range is between 0~16.
     * @param { number } value - The bit value corresponding to the number of bits.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    deflatePrime(strm: ZStream, bits: number, value: number): Promise<ReturnStatus>;
  }

  /**
   * Gzip related interfaces.
   *
   * @typedef GZip
   * @syscap SystemCapability.BundleManager.Zlib
   * @atomicservice
   * @since 12
   */
  interface GZip {

    /**
     * Associate a gzFile with the file descriptor fd.
     *
     * @param { number } fd - The file descriptor. Usually this is obtained through system calls to 'open' or other methods.
     * @param { string } mode - Used to specify access mode.
     * @returns { Promise<void> }
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800002 - No such file or access mode error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzdopen(fd: number, mode: string): Promise<void>;

    /**
     * Set the internal buffer size used by this library's functions for file to size.
     *
     * @param { number } size - The internal buffer size to be set.
     * @returns { Promise<number> } Returns 0 on success.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzbuffer(size: number): Promise<number>;

    /**
     * Open the gzip (.gz) file at path for reading and decompressing, or compressing and writing.
     *

     * @param { string } path - The file path to be opened.
     * @param { string } mode - Specify the file opening method.
     * @returns { Promise<void> }
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800002 - No such file or access mode error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzopen(path: string, mode: string): Promise<void>;

    /**
     * Check if the reading position of the gzip compressed file has reached the end of the file.
     *
     * @returns { Promise<number> } Return 1 (true) if the end-of-file indicator for file has been set while reading.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzeof(): Promise<number>;

    /**
     * Check if the specified gzip file handle file directly accesses the original uncompressed data.
     *
     * @returns { Promise<number> } returns 1 (true) if transparent writing was requested.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzdirect(): Promise<number>;

    /**
     * Flush all pending output for file, if necessary, close file and deallocate the (de)compression state.
     *
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800006 - Memory allocation failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzclose(): Promise<ReturnStatus>;

    /**
     * Clear the error and end-of-file flags for file.
     *
     * @returns { Promise<void> }
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzclearerr(): Promise<void>;

    /**
     * The error message for the last error which occurred on file.
     *
     * @returns { Promise<GzErrorOutputInfo> } Return the status message for the last status which occurred on file and ReturnStatus.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzerror(): Promise<GzErrorOutputInfo>;

    /**
     * Read and decompress one byte from file.
     *
     * @returns { Promise<number> } Return the ASCII code of a character.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzgetc(): Promise<number>;

    /**
     * Flush all pending output to file.
     *
     * @param { CompressFlushMode } flush - Control the behavior of refresh operations.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzflush(flush: CompressFlushMode): Promise<ReturnStatus>;

    /**
     * Compress and write nitems items of size size from buf to file.
     *
     * @param { ArrayBuffer } buf - The buffer to write data to.
     * @param { number } size - The number of bytes in a single data block.
     * @param { number } nitems - Number of data blocks to be written.
     * @returns { Promise<number> } Return the number of full items written of size size.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzfwrite(buf: ArrayBuffer, size: number, nitems: number): Promise<number>;

    /**
     * Read and decompress data from gzip compressed files.
     *
     * @param { ArrayBuffer } buf - Target buffer for storing read results.
     * @param { number } size - The number of bytes in a single data block.
     * @param { number } nitems - Number of data blocks to be read.
     * @returns { Promise<number> } Return the number of full items read of size size.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzfread(buf: ArrayBuffer, size: number, nitems: number): Promise<number>;

    /**
     * Same as gzclose(), gzclosew() only for use when writing or appending.
     *
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800006 - Memory allocation failed.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzclosew(): Promise<ReturnStatus>;

    /**
     * Same as gzclose(), gzcloser() is only for use when reading.
     *
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzcloser(): Promise<ReturnStatus>;

    /**
     * Compress and write the len uncompressed bytes at buf to file.
     *
     * @param { ArrayBuffer } buf - Object to the data buffer to be written.
     * @param { number } len - The len uncompressed bytes.
     * @returns { Promise<number> } Return the number of uncompressed bytes written.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzwrite(buf: ArrayBuffer, len: number): Promise<number>;

    /**
     * Push c back onto the stream for file to be read as the first character on the next read.
     *
     * @param { number } c - To fall back to the character before the input stream.
     * @returns { Promise<number> } Return the character pushed.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzungetc(c: number): Promise<number>;

    /**
     * Return the starting position for the next gzread or gzwrite on file.
     *
     * @returns { Promise<number> } Return the starting position for the next gzread or gzwrite on file.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gztell(): Promise<number>;

    /**
     * Dynamically update the compression level and strategy for file.
     *
     * @param { CompressLevel } level - Compression level.
     * @param { CompressStrategy } strategy - Compression strategy.
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzsetparams(level: CompressLevel, strategy: CompressStrategy): Promise<ReturnStatus>;

    /**
     * Set the starting position to offset relative to whence for the next gzread or gzwrite on file.
     *
     * @param { number } offset - Specify the new offset to move to.
     * @param { OffsetReferencePoint } whence - Define the reference point for offset.
     * @returns { Promise<number> } Return the resulting offset location as measured in bytes from the beginning of the uncompressed stream.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzseek(offset: number, whence: OffsetReferencePoint): Promise<number>;

    /**
     * Rewind file. This function is supported only for reading.
     *
     * @returns { Promise<ReturnStatus> } Return ReturnStatus the specific meaning is defined as enum.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzrewind(): Promise<ReturnStatus>;

    /**
     * Read and decompress up to len uncompressed bytes from file into buf.
     *
     * @param { ArrayBuffer } buf - User provided buffer address.
     * @returns { Promise<number> } Return the number of uncompressed bytes actually read, less than len for end of file.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzread(buf: ArrayBuffer): Promise<number>;

    /**
     * Compress and write the given null-terminated string s to file, excluding the terminating null character.
     *
     * @param { string } str - Format descriptors and plain text.
     * @returns { Promise<number> } Return the number of characters written.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzputs(str: string): Promise<number>;

    /**
     * Compress and write c, converted to an unsigned char, into file.
     *
     * @param { number } char - Write ASCII values for characters.
     * @returns { Promise<number> } Return the value that was written.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzputc(char: number): Promise<number>;

    /**
     * Convert, format, compress, and write the arguments to file under control of the string format, as in fprintf.
     *
     * @param { string } format - Format descriptors and plain text.
     * @param { Array<string | number> } args - Variable argument lists.
     * @returns { Promise<number> } Return the number of uncompressed bytes actually written.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800004 - ZStream error.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzprintf(format: string, ...args: Array<string | number>): Promise<number>;

    /**
     * Return the current compressed (actual) read or write offset of file.
     *
     * @returns { Promise<number> } Return the current compressed (actual) read or write offset of file.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzoffset(): Promise<number>;

    /**
     * Read and decompress bytes from file into buf, until len-1 characters are read, or until a newline character is read and transferred to buf,
     * or an end-of-file condition is encountered.
     *
     * @param { ArrayBuffer } buf - Store the read row data.
     * @returns { Promise<string> } Return buf which is a null-terminated string.
     * @throws { BusinessError } 401 - The parameter check failed. Possible causes: 1. Mandatory parameters are left unspecified;
     * 2. Incorrect parameter types; 3. Parameter verification failed.
     * @throws { BusinessError } 17800009 - Internal structure error.
     * @syscap SystemCapability.BundleManager.Zlib
     * @atomicservice
     * @since 12
     */
    gzgets(buf: ArrayBuffer): Promise<string>;
  }
}
export default zlib;