5   Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
586   only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
598 	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses.  in blogic_init_probeinfo_isa()
656   and Bus Probe Information to be checked for potential BusLogic MultiMaster
658   machines as well as from the list of standard BusLogic MultiMaster ISA
659   I/O Addresses.  It returns the number of PCI MultiMaster Host Adapters found.
679 	   Iterate over the MultiMaster PCI Host Adapters.  For each  in blogic_init_mm_probeinfo()
684 	   The MultiMaster BIOS will first recognize a host adapter at  in blogic_init_mm_probeinfo()
720 …blogic_err("BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n", NULL, base_addr…  in blogic_init_mm_probeinfo()
725 …blogic_err("BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n", NULL, base_a…  in blogic_init_mm_probeinfo()
730 			blogic_err("BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n", NULL, irq_ch);  in blogic_init_mm_probeinfo()
735 			blogic_notice("BusLogic: PCI MultiMaster Host Adapter detected at\n", NULL);  in blogic_init_mm_probeinfo()
765 		   For the first MultiMaster Host Adapter enumerated,  in blogic_init_mm_probeinfo()
791 		   Determine whether this MultiMaster Host Adapter has its  in blogic_init_mm_probeinfo()
794 		   MultiMaster Host Adapter and must be recognized first.  in blogic_init_mm_probeinfo()
796 		   after any Primary MultiMaster Host Adapter is probed.  in blogic_init_mm_probeinfo()
826 	   option is ON for the first enumerated MultiMaster Host Adapter,  in blogic_init_mm_probeinfo()
828 	   MultiMaster BIOS will recognize MultiMaster Host Adapters in  in blogic_init_mm_probeinfo()
831 	   If this option is OFF, then the MultiMaster BIOS will recognize  in blogic_init_mm_probeinfo()
832 	   MultiMaster Host Adapters in the order they are enumerated by  in blogic_init_mm_probeinfo()
839 	   If no PCI MultiMaster Host Adapter is assigned the Primary  in blogic_init_mm_probeinfo()
852 	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses,  in blogic_init_mm_probeinfo()
878 	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,  in blogic_init_mm_probeinfo()
1012   list of standard BusLogic MultiMaster ISA I/O Addresses.  By default, if both
1013   FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
1015   controlled by the first PCI MultiMaster Host Adapter, in which case
1016   MultiMaster Host Adapters will be probed first.  The BusLogic Driver Options
1024 	   If a PCI BIOS is present, interrogate it for MultiMaster and  in blogic_init_probeinfo_list()
1026 	   ISA MultiMaster probe.  in blogic_init_probeinfo_list()
1060 				   PCI MultiMaster Host Adapter, then reverse  in blogic_init_probeinfo_list()
1061 				   the probe order so that MultiMaster Host  in blogic_init_probeinfo_list()
1327 		blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n", adapter,  in blogic_checkadapter()
1464 	   BusLogic MultiMaster Host Adapters can be identified by their  in blogic_rdconfig()
1580 	   Termination Information from "W" series MultiMaster Host Adapters.  in blogic_rdconfig()
1600 	   AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.  in blogic_rdconfig()
1639 	   series MultiMaster Host Adapters.  in blogic_rdconfig()
1705 	   all "W" series MultiMaster Host Adapters, on "C" series  in blogic_rdconfig()
1706 	   MultiMaster Host Adapters with firmware version 4.22 and above,  in blogic_rdconfig()
1707 	   and on "S" series MultiMaster Host Adapters with firmware version  in blogic_rdconfig()
1751 	   Initialize parameters common to MultiMaster and FlashPoint  in blogic_rdconfig()
3273 		   Attempt to Abort this CCB.  MultiMaster Firmware versions  in DEF_SCSI_QCMD()
3375   series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3376   series MultiMaster Host Adapters.  With Extended Translation enabled, drives