| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" 5 $schema: "http://devicetree.org/meta-schemas/core.yaml#" 7 title: STMicroelectronics STM32 ADC bindings 10 STM32 ADC is a successive approximation analog-to-digital converter. 11 It has several multiplexed input channels. Conversions can be performed 12 in single, continuous, scan or discontinuous mode. Result of the ADC is 13 stored in a left-aligned or right-aligned 32-bit data register. 17 voltage goes beyond the user-defined, higher or lower thresholds. [all …]
|
| D | st,stm32-dfsdm-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectronics STM32 DFSDM ADC device driver 10 - Fabrice Gasnier <fabrice.gasnier@st.com> 11 - Olivier Moysan <olivier.moysan@st.com> 14 STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to 17 - Sigma delta modulators (motor control, metering...) 18 - PDM microphones (audio digital microphone) [all …]
|
| D | adi,ad7124.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 4 --- 5 $id: http://devicetree.org/schemas/iio/adc/adi,ad7124.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: Analog Devices AD7124 ADC device driver 11 - Stefan Popa <stefan.popa@analog.com> 14 Bindings for the Analog Devices AD7124 ADC device. Datasheet can be 16 https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf 21 - adi,ad7124-4 22 - adi,ad7124-8 [all …]
|
| D | qcom,pm8xxx-xoadc.txt | 3 The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal 4 oscillator ADC) encompassing PM8018, PM8038, PM8058 and PM8921. 8 - compatible: should be one of: 9 "qcom,pm8018-adc" 10 "qcom,pm8038-adc" 11 "qcom,pm8058-adc" 12 "qcom,pm8921-adc" 14 - reg: should contain the ADC base address in the PMIC, typically 17 - xoadc-ref-supply: should reference a regulator that can supply 21 The following required properties are standard for IO channels, see [all …]
|
| D | cosmic,10001-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Cosmic Circuits CC-10001 ADC 10 - Jonathan Cameron <jic23@kernel.org> 13 Cosmic Circuits 10001 10-bit ADC device. 17 const: cosmic,10001-adc 22 adc-reserved-channels: 25 Bitmask of reserved channels, i.e. channels that cannot be [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/adc/ |
| D | st,stm32-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectronics STM32 ADC 10 STM32 ADC is a successive approximation analog-to-digital converter. 11 It has several multiplexed input channels. Conversions can be performed 12 in single, continuous, scan or discontinuous mode. Result of the ADC is 13 stored in a left-aligned or right-aligned 32-bit data register. 17 voltage goes beyond the user-defined, higher or lower thresholds. [all …]
|
| D | st,stm32-dfsdm-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/st,stm32-dfsdm-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: STMicroelectronics STM32 DFSDM ADC device driver 10 - Fabrice Gasnier <fabrice.gasnier@foss.st.com> 11 - Olivier Moysan <olivier.moysan@foss.st.com> 14 STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to 17 - Sigma delta modulators (motor control, metering...) 18 - PDM microphones (audio digital microphone) [all …]
|
| D | ti,am3359-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: TI AM3359 ADC 10 - Miquel Raynal <miquel.raynal@bootlin.com> 15 - enum: 16 - ti,am3359-adc 17 - ti,am4372-adc 18 - items: [all …]
|
| D | cosmic,10001-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/cosmic,10001-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Cosmic Circuits CC-10001 ADC 10 - Jonathan Cameron <jic23@kernel.org> 13 Cosmic Circuits 10001 10-bit ADC device. 17 const: cosmic,10001-adc 22 adc-reserved-channels: 25 Bitmask of reserved channels, i.e. channels that cannot be [all …]
|
| D | atmel,sama9260-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: AT91 sama9260 and similar Analog to Digital Converter (ADC) 10 - Alexandre Belloni <alexandre.belloni@bootlin.com> 15 - atmel,at91sam9260-adc 16 - atmel,at91sam9rl-adc 17 - atmel,at91sam9g45-adc 18 - atmel,at91sam9x5-adc [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/input/touchscreen/ |
| D | resistive-adc-touch.txt | 1 Generic resistive touchscreen ADC 5 - compatible: must be "resistive-adc-touch" 6 The device must be connected to an ADC device that provides channels for 8 Refer to ../iio/iio-bindings.txt for details 9 - iio-channels: must have at least two channels connected to an ADC device. 10 These should correspond to the channels exposed by the ADC device and should 11 have the right index as the ADC device registers them. These channels 13 - iio-channel-names: must have all the channels' names. Mandatory channels 17 - iio-channels: The third channel named "pressure" is optional and can be 18 used if the ADC device also measures pressure besides position. [all …]
|
| /kernel/linux/linux-5.10/drivers/iio/adc/ |
| D | mcp320x.c | 1 // SPDX-License-Identifier: GPL-2.0-only 8 * Driver for following ADC chips from Microchip Technology's: 14 * ------------ 20 * ------------ 23 * ------------ 65 const struct iio_chan_spec *channels; member 72 * struct mcp320x - Microchip SPI ADC instance 74 * @msg: SPI message to select a channel and receive a value from the ADC 80 * @chip_info: ADC properties 81 * @tx_buf: buffer for @transfer[0] (not used on single-channel converters) [all …]
|
| D | stm32-adc.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * This file is part of STM32 ADC driver 5 * Copyright (C) 2016, STMicroelectronics - All Rights Reserved 11 #include <linux/dma-mapping.h> 15 #include <linux/iio/timer/stm32-lptim-trigger.h> 16 #include <linux/iio/timer/stm32-timer-trigger.h> 29 #include "stm32-adc-core.h" 34 /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */ 37 #define STM32_ADC_CH_MAX 20 /* max number of channels */ 55 /* extsel - trigger mux selection value */ [all …]
|
| D | qcom-pm8xxx-xoadc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 * specific-purpose and general purpose ADC converters and channels. 24 #include "qcom-vadc-common.h" 28 * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: 29 * drivers/misc/pmic8058-xoadc.c 30 * drivers/hwmon/pm8xxx-adc.c 58 /* Proper ADC registers */ 100 * On a later ADC the decimation factors are defined as 124 * Physical channels which MUST exist on all PM variants in order to provide 156 * struct xoadc_channel - encodes channel properties and defaults [all …]
|
| D | ti-adc084s021.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Driver for Texas Instruments' ADC084S021 ADC chip. 31 __be16 channels[4]; member 39 __be16 rx_buf[5]; /* First 16-bits are trash */ 68 * Read an ADC channel and return its value. 70 * @adc: The ADC SPI data. 73 static int adc084s021_adc_conversion(struct adc084s021 *adc, void *data) in adc084s021_adc_conversion() argument 75 int n_words = (adc->spi_trans.len >> 1) - 1; /* Discard first word */ in adc084s021_adc_conversion() 80 ret = spi_sync(adc->spi, &adc->message); in adc084s021_adc_conversion() 85 *(p + i) = adc->rx_buf[i + 1]; in adc084s021_adc_conversion() [all …]
|
| /kernel/linux/linux-6.6/drivers/iio/adc/ |
| D | mcp320x.c | 1 // SPDX-License-Identifier: GPL-2.0-only 8 * Driver for following ADC chips from Microchip Technology's: 14 * ------------ 20 * ------------ 23 * ------------ 65 const struct iio_chan_spec *channels; member 72 * struct mcp320x - Microchip SPI ADC instance 74 * @msg: SPI message to select a channel and receive a value from the ADC 80 * @chip_info: ADC properties 81 * @tx_buf: buffer for @transfer[0] (not used on single-channel converters) [all …]
|
| D | stm32-adc.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * This file is part of STM32 ADC driver 5 * Copyright (C) 2016, STMicroelectronics - All Rights Reserved 12 #include <linux/dma-mapping.h> 16 #include <linux/iio/timer/stm32-lptim-trigger.h> 17 #include <linux/iio/timer/stm32-timer-trigger.h> 26 #include <linux/nvmem-consumer.h> 31 #include "stm32-adc-core.h" 36 /* BOOST bit must be set on STM32H7 when ADC clock is above 20MHz */ 39 #define STM32_ADC_CH_MAX 20 /* max number of channels */ [all …]
|
| D | qcom-pm8xxx-xoadc.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 * specific-purpose and general purpose ADC converters and channels. 13 #include <linux/iio/adc/qcom-vadc-common.h> 27 * Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC: 28 * drivers/misc/pmic8058-xoadc.c 29 * drivers/hwmon/pm8xxx-adc.c 57 /* Proper ADC registers */ 99 * On a later ADC the decimation factors are defined as 123 * Physical channels which MUST exist on all PM variants in order to provide 155 * struct xoadc_channel - encodes channel properties and defaults [all …]
|
| D | ti-adc084s021.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Driver for Texas Instruments' ADC084S021 ADC chip. 31 __be16 channels[4]; member 39 __be16 rx_buf[5]; /* First 16-bits are trash */ 68 * adc084s021_adc_conversion() - Read an ADC channel and return its value. 70 * @adc: The ADC SPI data. 73 static int adc084s021_adc_conversion(struct adc084s021 *adc, __be16 *data) in adc084s021_adc_conversion() argument 75 int n_words = (adc->spi_trans.len >> 1) - 1; /* Discard first word */ in adc084s021_adc_conversion() 79 ret = spi_sync(adc->spi, &adc->message); in adc084s021_adc_conversion() 84 *(data + i) = adc->rx_buf[i + 1]; in adc084s021_adc_conversion() [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/ |
| D | iio-bindings.txt | 2 from Lars-Peter Clausen [1]. 4 Sources of IIO channels can be represented by any node in the device 10 value of a #io-channel-cells property in the IIO provider node. 12 [1] https://marc.info/?l=linux-iio&m=135902119507483&w=2 17 #io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes 27 adc: voltage-sensor@35 { 30 #io-channel-cells = <1>; 36 adc@35 { 37 compatible = "some-vendor,some-adc"; 40 adc1: iio-device@0 { [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/input/touchscreen/ |
| D | resistive-adc-touch.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/input/touchscreen/resistive-adc-touch.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Generic resistive touchscreen ADC 10 - Oleksij Rempel <o.rempel@pengutronix.de> 13 Generic ADC based resistive touchscreen controller 14 The device must be connected to an ADC device that provides channels for 18 - $ref: touchscreen.yaml# 22 const: resistive-adc-touch [all …]
|
| /kernel/linux/linux-5.10/drivers/hwmon/ |
| D | adcxx.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 11 * ADC<bb><c>S<sss>, where 13 * * c is the number of channels (1, 2, 4, 8) 18 * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf 32 #include <linux/hwmon-sysfs.h> 42 u32 channels; member 52 struct adcxx *adc = spi_get_drvdata(spi); in adcxx_show() local 58 if (mutex_lock_interruptible(&adc->lock)) in adcxx_show() 59 return -ERESTARTSYS; in adcxx_show() 61 if (adc->channels == 1) { in adcxx_show() [all …]
|
| /kernel/linux/linux-6.6/drivers/hwmon/ |
| D | adcxx.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 11 * ADC<bb><c>S<sss>, where 13 * * c is the number of channels (1, 2, 4, 8) 18 * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf 32 #include <linux/hwmon-sysfs.h> 42 u32 channels; member 52 struct adcxx *adc = spi_get_drvdata(spi); in adcxx_show() local 58 if (mutex_lock_interruptible(&adc->lock)) in adcxx_show() 59 return -ERESTARTSYS; in adcxx_show() 61 if (adc->channels == 1) { in adcxx_show() [all …]
|
| /kernel/linux/linux-6.6/drivers/thermal/qcom/ |
| D | qcom-spmi-adc-tm5.c | 1 // SPDX-License-Identifier: GPL-2.0-only 6 * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved. 12 #include <linux/iio/adc/qcom-vadc-common.h> 26 * Thermal monitoring block consists of 8 (ADC_TM5_NUM_CHANNELS) channels. Each 27 * channel is programmed to use one of ADC channels for voltage comparison. 28 * Voltages are programmed using ADC codes, so we have to convert temp to 29 * voltage and then to ADC code value. 31 * Configuration of TM channels must match configuration of corresponding ADC 32 * channels. 178 * struct adc_tm5_channel - ADC Thermal Monitoring channel data. [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/input/ |
| D | adc-joystick.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) 2 # Copyright 2019-2020 Artur Rojek 4 --- 5 $id: http://devicetree.org/schemas/input/adc-joystick.yaml# 6 $schema: http://devicetree.org/meta-schemas/core.yaml# 8 title: ADC attached joystick 11 - Artur Rojek <contact@artur-rojek.eu> 14 Bindings for joystick devices connected to ADC controllers supporting 18 - $ref: input.yaml# 22 const: adc-joystick [all …]
|