Searched full:asserting (Results 1 – 25 of 262) sorted by relevance
1234567891011
42 Delay in ms after powering the card and de-asserting the47 Delay in us after asserting the reset-gpios (if any)
42 Delay in ms after powering the card and de-asserting the48 Delay in us after asserting the reset-gpios (if any)
27 * Enabling/disabling an interrupt line involves asserting/clearing29 * asserting the corresponding bit in ICR.
10 - resets: phandle to the reset controller asserting this device in
9 - resets: phandle to the reset controller asserting this device in
8 - resets: phandle to the reset controller asserting this device in
13 - resets: Should contain a reference to the reset controller asserting
31 * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the
15 state. De-asserting break wakes up the BT chip.
30 system can rely on asserting the line to enable the GNSS device.
32 - timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is
294 return dev_err_probe(dev, ret, "error asserting sense reset\n"); in sfctemp_probe()298 return dev_err_probe(dev, ret, "error asserting bus reset\n"); in sfctemp_probe()
38 ensure the timing required between asserting ENABLE
47 * de-asserting the reset. Delay 10us just to be safe. in clk_pll_enable()281 * de-asserting the reset. Delay 10us just to be safe. in clk_pll_sr2_enable()
68 Delay after asserting reset to the PCIe device.
30 * done by asserting the remfreqmsk bit (XSPAREREG<7>) in mgag200_bmc_disable_vidrst()
124 dev_err(ps->dev, "PS 0x%x: asserting RESET while powered down\n", ps->offset); in apple_pmgr_reset_assert()127 /* Quiesce device before asserting reset */ in apple_pmgr_reset_assert()
19 * Suspend Modulation works by asserting and de-asserting the SUSP# pin20 * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP#
38 * The hardware is asserting attn and the state machine is
91 Delay after asserting reset to the PCIe device.