| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | dme1737.rst | 18 Addresses scanned: none, address read from Super-I/O config space
34 Addresses scanned: none, address read from Super-I/O config space
43 -----------------
52 Include non-standard LPC addresses 0x162e and 0x164e
55 - VIA EPIA SN18000
59 -----------
63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
65 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
[all …]
|
| D | jc42.rst | 10 https://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
20 http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
22 http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
36 http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
70 https://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
72 https://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
99 Addresses scanned: I2C 0x18 - 0x1f
102 Guenter Roeck <linux@roeck-us.net>
106 -----------
113 The driver auto-detects the chips listed above, but can be manually instantiated
[all …]
|
| /kernel/linux/linux-6.6/Documentation/hwmon/ |
| D | dme1737.rst | 18 Addresses scanned: none, address read from Super-I/O config space
34 Addresses scanned: none, address read from Super-I/O config space
43 -----------------
52 Include non-standard LPC addresses 0x162e and 0x164e
55 - VIA EPIA SN18000
59 -----------
63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
65 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
[all …]
|
| D | jc42.rst | 10 https://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
20 http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
22 http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
36 http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
70 https://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
72 https://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
99 Addresses scanned: I2C 0x18 - 0x1f
102 Guenter Roeck <linux@roeck-us.net>
106 -----------
113 The driver auto-detects the chips listed above, but can be manually instantiated
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/tuners/ |
| D | tuner-xc2028.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
3 * tuner-xc2028
5 * Copyright (c) 2007-2008 Mauro Carvalho Chehab <mchehab@kernel.org>
13 #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
14 #define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw"
29 XC2028_AUTO = 0, /* By default, auto-detects */
67 printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", in xc2028_attach()
|
| /kernel/linux/linux-6.6/drivers/media/tuners/ |
| D | xc2028.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
5 * Copyright (c) 2007-2008 Mauro Carvalho Chehab <mchehab@kernel.org>
13 #define XC2028_DEFAULT_FIRMWARE "xc3028-v27.fw"
14 #define XC3028L_DEFAULT_FIRMWARE "xc3028L-v36.fw"
29 XC2028_AUTO = 0, /* By default, auto-detects */
67 printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n", in xc2028_attach()
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/i2c/ |
| D | marvell,mv64xxx-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Gregory CLEMENT <gregory.clement@bootlin.com>
15 - const: allwinner,sun4i-a10-i2c
16 - items:
17 - const: allwinner,sun7i-a20-i2c
18 - const: allwinner,sun4i-a10-i2c
19 - const: allwinner,sun6i-a31-i2c
[all …]
|
| /kernel/linux/linux-5.10/Documentation/filesystems/ |
| D | ceph.rst | 1 .. SPDX-License-Identifier: GPL-2.0
15 * N-way replication of data across storage nodes
32 re-replicated in a distributed fashion by the storage nodes themselves
37 in-memory cache above the file namespace that is extremely scalable,
39 and can tolerate arbitrary (well, non-Byzantine) node failures. The
61 files and bytes. That is, a 'getfattr -d foo' on any directory in the
72 setfattr -n ceph.quota.max_bytes -v 100000000 /some/dir
73 getfattr -n ceph.quota.max_bytes /some/dir
85 # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt
93 # mount -t ceph 1.2.3.4:/ /mnt/ceph
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/i2c/ |
| D | marvell,mv64xxx-i2c.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Gregory CLEMENT <gregory.clement@bootlin.com>
15 - const: allwinner,sun4i-a10-i2c
16 - items:
17 - const: allwinner,sun7i-a20-i2c
18 - const: allwinner,sun4i-a10-i2c
19 - const: allwinner,sun6i-a31-i2c
[all …]
|
| /kernel/linux/linux-5.10/Documentation/admin-guide/ |
| D | parport.rst | 4 The ``parport`` code provides parallel-port support under Linux. This
16 port-sharing) and architecture-dependent (which deals with actually
28 architecture-dependent code with (for example)::
30 # insmod parport_pc io=0x3bc,0x378,0x278 irq=none,7,auto
32 to tell the ``parport`` code that you want three PC-style ports, one at
34 auto-detected IRQ. Currently, PC-style (``parport_pc``), Sun ``bpp``,
43 --------
49 options parport_pc io=0x378,0x278 irq=7,auto
51 modprobe will load ``parport_pc`` (with the options ``io=0x378,0x278 irq=7,auto``)
60 ------------------------
[all …]
|
| /kernel/linux/linux-6.6/Documentation/admin-guide/ |
| D | parport.rst | 4 The ``parport`` code provides parallel-port support under Linux. This
16 port-sharing) and architecture-dependent (which deals with actually
28 architecture-dependent code with (for example)::
30 # insmod parport_pc io=0x3bc,0x378,0x278 irq=none,7,auto
32 to tell the ``parport`` code that you want three PC-style ports, one at
34 auto-detected IRQ. Currently, PC-style (``parport_pc``), Sun ``bpp``,
43 --------
49 options parport_pc io=0x378,0x278 irq=7,auto
51 modprobe will load ``parport_pc`` (with the options ``io=0x378,0x278 irq=7,auto``)
60 ------------------------
[all …]
|
| /kernel/linux/linux-6.6/Documentation/filesystems/ |
| D | ceph.rst | 1 .. SPDX-License-Identifier: GPL-2.0
15 * N-way replication of data across storage nodes
32 re-replicated in a distributed fashion by the storage nodes themselves
37 in-memory cache above the file namespace that is extremely scalable,
39 and can tolerate arbitrary (well, non-Byzantine) node failures. The
66 `_<SNAPSHOT-NAME>_<INODE-NUMBER>`. Since filenames in general can't have
67 more than 255 characters, and `<node-id>` takes 13 characters, the long
68 snapshot names can take as much as 255 - 1 - 1 - 13 = 240.
71 files and bytes. That is, a 'getfattr -d foo' on any directory in the
82 setfattr -n ceph.quota.max_bytes -v 100000000 /some/dir
[all …]
|
| /kernel/linux/linux-6.6/Documentation/networking/device_drivers/ethernet/intel/ |
| D | e1000.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999 - 2013 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Speed and Duplex Configuration
16 - Additional Configurations
17 - Support
50 -------
54 :Valid Range: 0x01-0x0F, 0x20-0x2F
57 This parameter is a bit-mask that specifies the speed and duplex settings
[all …]
|
| D | ice.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 2018-2021 Intel Corporation.
13 - Overview
14 - Identifying Your Adapter
15 - Important Notes
16 - Additional Features & Configurations
17 - Performance Optimization
28 This driver supports XDP (Express Data Path) and AF_XDP zero-copy. Note that
43 -------------------------------------------
54 1) Make sure that your system's physical memory is in a high-performance
[all …]
|
| /kernel/linux/linux-5.10/Documentation/networking/device_drivers/ethernet/intel/ |
| D | e1000.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999 - 2013 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Speed and Duplex Configuration
16 - Additional Configurations
17 - Support
50 -------
54 :Valid Range: 0x01-0x0F, 0x20-0x2F
57 This parameter is a bit-mask that specifies the speed and duplex settings
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/atheros/atl1e/ |
| D | atl1e_hw.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
6 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
36 * 00-0B-6A-F6-00-DC in atl1e_hw_set_mac_addr()
40 value = (((u32)hw->mac_addr[2]) << 24) | in atl1e_hw_set_mac_addr()
41 (((u32)hw->mac_addr[3]) << 16) | in atl1e_hw_set_mac_addr()
42 (((u32)hw->mac_addr[4]) << 8) | in atl1e_hw_set_mac_addr()
43 (((u32)hw->mac_addr[5])) ; in atl1e_hw_set_mac_addr()
46 value = (((u32)hw->mac_addr[0]) << 8) | in atl1e_hw_set_mac_addr()
47 (((u32)hw->mac_addr[1])) ; in atl1e_hw_set_mac_addr()
62 if (is_valid_ether_addr(hw->perm_mac_addr)) in atl1e_get_permanent_address()
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/atheros/atl1e/ |
| D | atl1e_hw.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
6 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
36 * 00-0B-6A-F6-00-DC in atl1e_hw_set_mac_addr()
40 value = (((u32)hw->mac_addr[2]) << 24) | in atl1e_hw_set_mac_addr()
41 (((u32)hw->mac_addr[3]) << 16) | in atl1e_hw_set_mac_addr()
42 (((u32)hw->mac_addr[4]) << 8) | in atl1e_hw_set_mac_addr()
43 (((u32)hw->mac_addr[5])) ; in atl1e_hw_set_mac_addr()
46 value = (((u32)hw->mac_addr[0]) << 8) | in atl1e_hw_set_mac_addr()
47 (((u32)hw->mac_addr[1])) ; in atl1e_hw_set_mac_addr()
62 if (is_valid_ether_addr(hw->perm_mac_addr)) in atl1e_get_permanent_address()
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | vidioc-enuminput.rst | 1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
13 VIDIOC_ENUMINPUT - Enumerate video inputs
45 .. flat-table:: struct v4l2_input
46 :header-rows: 0
47 :stub-columns: 0
50 * - __u32
51 - ``index``
52 - Identifies the input, set by the application.
53 * - __u8
54 - ``name``\ [32]
[all …]
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/media/v4l/ |
| D | vidioc-enuminput.rst | 1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
13 VIDIOC_ENUMINPUT - Enumerate video inputs
45 .. flat-table:: struct v4l2_input
46 :header-rows: 0
47 :stub-columns: 0
50 * - __u32
51 - ``index``
52 - Identifies the input, set by the application.
53 * - __u8
54 - ``name``\ [32]
[all …]
|
| /kernel/linux/linux-5.10/Documentation/ide/ |
| D | ide.rst | 9 -------------------------------------------------------------------------------
21 For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
23 If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
26 For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
28 If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
37 -------------------------------------------------------------------------------
42 - 40-conductor IDE cables are capable of transferring data in DMA modes up to
45 - If possible devices should be attached to separate channels if they are
46 available. Typically the disk on the first and CD-ROM on the second.
48 - If you mix devices on the same cable, please consider using similar devices
[all …]
|
| /kernel/linux/linux-5.10/Documentation/admin-guide/hw-vuln/ |
| D | tsx_async_abort.rst | 1 .. SPDX-License-Identifier: GPL-2.0
3 TAA - TSX Asynchronous Abort
11 -------------------
23 ------------
28 CVE-2019-11135 TAA TSX Asynchronous Abort (TAA) condition on some
36 -------
43 hardware transactional memory support to improve performance of multi-threaded
58 Because the buffers are potentially shared between Hyper-Threads cross
59 Hyper-Thread attacks are possible.
70 ----------------
[all …]
|
| /kernel/linux/linux-6.6/Documentation/admin-guide/hw-vuln/ |
| D | tsx_async_abort.rst | 1 .. SPDX-License-Identifier: GPL-2.0
3 TAA - TSX Asynchronous Abort
11 -------------------
23 ------------
28 CVE-2019-11135 TAA TSX Asynchronous Abort (TAA) condition on some
36 -------
43 hardware transactional memory support to improve performance of multi-threaded
58 Because the buffers are potentially shared between Hyper-Threads cross
59 Hyper-Thread attacks are possible.
70 ----------------
[all …]
|
| /kernel/linux/linux-6.6/include/linux/ |
| D | ipmi.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
69 * Place-holder for the data, don't make any assumptions about
95 * Called when the interface detects a watchdog pre-timeout. If
140 * so some initialization code can come in and do the OEM-specific
161 * will be resent if no reply is received. If set to -1, the default
242 * If in auto maintenance mode, the driver will automatically go into
|
| /kernel/linux/linux-5.10/include/linux/ |
| D | ipmi.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
69 * Place-holder for the data, don't make any assumptions about
90 * Called when the interface detects a watchdog pre-timeout. If
135 * so some initialization code can come in and do the OEM-specific
156 * will be resent if no reply is received. If set to -1, the default
237 * If in auto maintenance mode, the driver will automatically go into
|
| /kernel/linux/linux-6.6/tools/lib/bpf/ |
| D | libbpf.h | 1 /* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
6 * Copyright (C) 2013-2015 Alexei Starovoitov <ast@kernel.org>
100 * @brief **libbpf_set_print()** sets user-provided log callback function to
105 * This function is thread-safe.
116 * - for object open from file, this will override setting object
118 * - for object open from memory buffer, this will specify an object
119 * name and will override default "<addr>-<buf-size>" name;
122 /* parse map definitions non-strictly, allowing extra attributes/data */
126 * auto-pinned to that path on load; defaults to "/sys/fs/bpf".
136 /* Path to the custom BTF to be used for BPF CO-RE relocations.
[all …]
|