| /kernel/linux/linux-6.6/drivers/platform/mellanox/ |
| D | mlxbf-tmfifo.c | 1 // SPDX-License-Identifier: GPL-2.0+
24 #include "mlxbf-tmfifo-regs.h"
26 /* Vring size. */
29 /* Console Tx buffer size. */
35 /* House-keeping timer interval. */
38 /* Virtual devices sharing the TM FIFO. */
53 /* ACPI UID for BlueField-3. */
59 * struct mlxbf_tmfifo_vring - Structure of the TmFifo virtual ring
71 * @num: vring size (number of descriptors)
72 * @align: vring alignment size
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/ |
| D | ibm,emac.txt | 8 correct clock-frequency property.
13 - device_type : "network"
15 - compatible : compatible list, contains 2 entries, first is
16 "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
18 "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
20 - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
21 - reg : <registers mapping>
22 - local-mac-address : 6 bytes, MAC address
23 - mal-device : phandle of the associated McMAL node
24 - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
[all …]
|
| D | altera_tse.txt | 1 * Altera Triple-Speed Ethernet MAC driver (TSE)
4 - compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
5 be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
8 - reg: Address and length of the register set for the device. It contains
9 the information of registers in the same order as described by reg-names
10 - reg-names: Should contain the reg names
14 "rx_csr" : xDMA Rx dispatcher control and status space region
15 "rx_desc": MSGDMA Rx dispatcher descriptor space region
16 "rx_resp": MSGDMA Rx dispatcher response space region
18 - interrupts: Should contain the TSE interrupts and it's mode.
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/net/ |
| D | ibm,emac.txt | 8 correct clock-frequency property.
13 - device_type : "network"
15 - compatible : compatible list, contains 2 entries, first is
16 "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
18 "ibm,emac4". For Axon, thus, we have: "ibm,emac-axon",
20 - interrupts : <interrupt mapping for EMAC IRQ and WOL IRQ>
21 - reg : <registers mapping>
22 - local-mac-address : 6 bytes, MAC address
23 - mal-device : phandle of the associated McMAL node
24 - mal-tx-channel : 1 cell, index of the tx channel on McMAL associated
[all …]
|
| /kernel/linux/linux-5.10/arch/powerpc/boot/dts/ |
| D | mpc5121.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * Copyright 2007-2008 Freescale Semiconductor Inc.
8 #include <dt-bindings/clock/mpc512x-clock.h>
10 /dts-v1/;
15 #address-cells = <1>;
16 #size-cells = <1>;
17 interrupt-parent = <&ipic>;
25 #address-cells = <1>;
26 #size-cells = <0>;
31 d-cache-line-size = <0x20>; /* 32 bytes */
[all …]
|
| D | eiger.dts | 11 /dts-v1/;
14 #address-cells = <2>;
15 #size-cells = <1>;
18 dcr-parent = <&{/cpus/cpu@0}>;
30 #address-cells = <1>;
31 #size-cells = <0>;
37 clock-frequency = <0>; /* Filled in by U-Boot */
38 timebase-frequency = <0>; /* Filled in by U-Boot */
39 i-cache-line-size = <32>;
40 d-cache-line-size = <32>;
[all …]
|
| D | arches.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
17 /dts-v1/;
20 #address-cells = <2>;
21 #size-cells = <1>;
24 dcr-parent = <&{/cpus/cpu@0}>;
34 #address-cells = <1>;
35 #size-cells = <0>;
41 clock-frequency = <0>; /* Filled in by U-Boot */
42 timebase-frequency = <0>; /* Filled in by U-Boot */
43 i-cache-line-size = <32>;
[all …]
|
| /kernel/linux/linux-6.6/arch/powerpc/boot/dts/ |
| D | mpc5121.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * Copyright 2007-2008 Freescale Semiconductor Inc.
8 #include <dt-bindings/clock/mpc512x-clock.h>
10 /dts-v1/;
15 #address-cells = <1>;
16 #size-cells = <1>;
17 interrupt-parent = <&ipic>;
25 #address-cells = <1>;
26 #size-cells = <0>;
31 d-cache-line-size = <0x20>; /* 32 bytes */
[all …]
|
| D | eiger.dts | 11 /dts-v1/;
14 #address-cells = <2>;
15 #size-cells = <1>;
18 dcr-parent = <&{/cpus/cpu@0}>;
30 #address-cells = <1>;
31 #size-cells = <0>;
37 clock-frequency = <0>; /* Filled in by U-Boot */
38 timebase-frequency = <0>; /* Filled in by U-Boot */
39 i-cache-line-size = <32>;
40 d-cache-line-size = <32>;
[all …]
|
| D | arches.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
17 /dts-v1/;
20 #address-cells = <2>;
21 #size-cells = <1>;
24 dcr-parent = <&{/cpus/cpu@0}>;
34 #address-cells = <1>;
35 #size-cells = <0>;
41 clock-frequency = <0>; /* Filled in by U-Boot */
42 timebase-frequency = <0>; /* Filled in by U-Boot */
43 i-cache-line-size = <32>;
[all …]
|
| /kernel/linux/linux-5.10/drivers/platform/mellanox/ |
| D | mlxbf-tmfifo.c | 1 // SPDX-License-Identifier: GPL-2.0+
24 #include "mlxbf-tmfifo-regs.h"
26 /* Vring size. */
29 /* Console Tx buffer size. */
35 /* House-keeping timer interval. */
38 /* Virtual devices sharing the TM FIFO. */
53 * mlxbf_tmfifo_vring - Structure of the TmFifo virtual ring
64 * @num: vring size (number of descriptors)
65 * @align: vring alignment size
68 * @fifo: pointer to the tmfifo structure
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/powerpc/fsl/ |
| D | mpc5121-psc.txt | 4 ----------------
7 are specified by fsl,mpc5121-psc-uart nodes in the
8 fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
9 Controller node fsl,mpc5121-psc-fifo is required there:
11 fsl,mpc512x-psc-uart nodes
12 --------------------------
15 - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
17 - reg : Offset and length of the register set for the PSC device
18 - interrupts : <a b> where a is the interrupt number of the
19 PSC FIFO Controller and b is a field that represents an
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/powerpc/fsl/ |
| D | mpc5121-psc.txt | 4 ----------------
7 are specified by fsl,mpc5121-psc-uart nodes in the
8 fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
9 Controller node fsl,mpc5121-psc-fifo is required there:
11 fsl,mpc512x-psc-uart nodes
12 --------------------------
15 - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
17 - reg : Offset and length of the register set for the PSC device
18 - interrupts : <a b> where a is the interrupt number of the
19 PSC FIFO Controller and b is a field that represents an
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/microchip/ |
| D | sam9x60.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sam9x60.dtsi - Device Tree Include file for Microchip SAM9X60 SoC
10 #include <dt-bindings/dma/at91.h>
11 #include <dt-bindings/pinctrl/at91.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/clock/at91.h>
15 #include <dt-bindings/mfd/at91-usart.h>
16 #include <dt-bindings/mfd/atmel-flexcom.h>
19 #address-cells = <1>;
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/intel/fm10k/ |
| D | fm10k_mbx.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2013 - 2019 Intel Corporation. */
7 * fm10k_fifo_init - Initialize a message FIFO
8 * @fifo: pointer to FIFO
9 * @buffer: pointer to memory to be used to store FIFO
10 * @size: maximum message size to store in FIFO, must be 2^n - 1
12 static void fm10k_fifo_init(struct fm10k_mbx_fifo *fifo, u32 *buffer, u16 size) in fm10k_fifo_init() argument
14 fifo->buffer = buffer; in fm10k_fifo_init()
15 fifo->size = size; in fm10k_fifo_init()
16 fifo->head = 0; in fm10k_fifo_init()
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/intel/fm10k/ |
| D | fm10k_mbx.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2013 - 2019 Intel Corporation. */
7 * fm10k_fifo_init - Initialize a message FIFO
8 * @fifo: pointer to FIFO
9 * @buffer: pointer to memory to be used to store FIFO
10 * @size: maximum message size to store in FIFO, must be 2^n - 1
12 static void fm10k_fifo_init(struct fm10k_mbx_fifo *fifo, u32 *buffer, u16 size) in fm10k_fifo_init() argument
14 fifo->buffer = buffer; in fm10k_fifo_init()
15 fifo->size = size; in fm10k_fifo_init()
16 fifo->head = 0; in fm10k_fifo_init()
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/sun/ |
| D | sunqe.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
14 #define GLOB_PSIZE 0x08UL /* Packet Size */
15 #define GLOB_MSIZE 0x0cUL /* Local-memory Size */
16 #define GLOB_RSIZE 0x10UL /* Receive partition size */
17 #define GLOB_TSIZE 0x14UL /* Transmit partition size */
34 #define GLOB_PSIZE_2048 0x00 /* 2k packet size */
35 #define GLOB_PSIZE_4096 0x01 /* 4k packet size */
36 #define GLOB_PSIZE_6144 0x10 /* 6k packet size */
37 #define GLOB_PSIZE_8192 0x11 /* 8k packet size */
45 /* The following registers are for per-qe channel information/status. */
[all …]
|
| D | sungem.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
26 #define GREG_SEBSTATE_RXWON 0x00000004 /* RX won internal arbitration */
31 #define GREG_CFG_RXDMALIM 0x000007c0 /* RX DMA grant limit */
34 #define GREG_CFG_ENBUG2FIX 0x00001000 /* Fix Rx hang after overflow */
39 * This auto-clearing does not occur when the alias at GREG_STAT2
48 #define GREG_STAT_RXDONE 0x00000010 /* One RX frame arrived */
49 #define GREG_STAT_RXNOBUF 0x00000020 /* No free RX buffers available */
50 #define GREG_STAT_RXTAGERR 0x00000040 /* RX tag framing is corrupt */
53 #define GREG_STAT_RXMAC 0x00008000 /* RX MAC signalled interrupt */
69 * signalled to the cpu. GREG_IACK can be used to clear specific top-level
[all …]
|
| D | cassini.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
29 /* cassini register map: 2M memory mapped in 32-bit memory space accessible as
30 * 32-bit words. there is no i/o port access. REG_ addresses are
42 * if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit
45 * DEFAULT: 0x0, SIZE: 5 bits
54 /* if enabled, BIM can send bursts across PCI bus > cacheline size. burst
57 * DEFAULT: 0x0, SIZE: 1 bit
62 /* top level interrupts [0-9] are auto-cleared to 0 when the status
63 * register is read. second level interrupts [13 - 18] are cleared at
64 * the source. tx completion register 3 is replicated in [19 - 31]
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/sun/ |
| D | sunqe.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
14 #define GLOB_PSIZE 0x08UL /* Packet Size */
15 #define GLOB_MSIZE 0x0cUL /* Local-memory Size */
16 #define GLOB_RSIZE 0x10UL /* Receive partition size */
17 #define GLOB_TSIZE 0x14UL /* Transmit partition size */
34 #define GLOB_PSIZE_2048 0x00 /* 2k packet size */
35 #define GLOB_PSIZE_4096 0x01 /* 4k packet size */
36 #define GLOB_PSIZE_6144 0x10 /* 6k packet size */
37 #define GLOB_PSIZE_8192 0x11 /* 8k packet size */
45 /* The following registers are for per-qe channel information/status. */
[all …]
|
| D | sungem.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
26 #define GREG_SEBSTATE_RXWON 0x00000004 /* RX won internal arbitration */
31 #define GREG_CFG_RXDMALIM 0x000007c0 /* RX DMA grant limit */
34 #define GREG_CFG_ENBUG2FIX 0x00001000 /* Fix Rx hang after overflow */
39 * This auto-clearing does not occur when the alias at GREG_STAT2
48 #define GREG_STAT_RXDONE 0x00000010 /* One RX frame arrived */
49 #define GREG_STAT_RXNOBUF 0x00000020 /* No free RX buffers available */
50 #define GREG_STAT_RXTAGERR 0x00000040 /* RX tag framing is corrupt */
53 #define GREG_STAT_RXMAC 0x00008000 /* RX MAC signalled interrupt */
69 * signalled to the cpu. GREG_IACK can be used to clear specific top-level
[all …]
|
| D | cassini.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
29 /* cassini register map: 2M memory mapped in 32-bit memory space accessible as
30 * 32-bit words. there is no i/o port access. REG_ addresses are
42 * if rx weight == 1 and tx weight == 0, rx == 2x tx transfer credit
45 * DEFAULT: 0x0, SIZE: 5 bits
54 /* if enabled, BIM can send bursts across PCI bus > cacheline size. burst
57 * DEFAULT: 0x0, SIZE: 1 bit
62 /* top level interrupts [0-9] are auto-cleared to 0 when the status
63 * register is read. second level interrupts [13 - 18] are cleared at
64 * the source. tx completion register 3 is replicated in [19 - 31]
[all …]
|
| /kernel/linux/linux-5.10/arch/m68k/include/asm/ |
| D | m54xxpci.h | 4 * m54xxpci.h -- ColdFire 547x and 548x PCI bus support
45 #define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */
53 #define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */
54 #define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */
55 #define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */
56 #define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */
57 #define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */
58 #define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */
60 #define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */
61 #define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */
[all …]
|
| /kernel/linux/linux-6.6/arch/m68k/include/asm/ |
| D | m54xxpci.h | 4 * m54xxpci.h -- ColdFire 547x and 548x PCI bus support
45 #define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */
53 #define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */
54 #define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */
55 #define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */
56 #define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */
57 #define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */
58 #define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */
60 #define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */
61 #define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/can/spi/mcp251xfd/ |
| D | mcp251xfd-ram.c | 1 // SPDX-License-Identifier: GPL-2.0
3 // mcp251xfd - Microchip MCP251xFD Family CAN controller driver
6 // Marc Kleine-Budde <kernel@pengutronix.de>
9 #include "mcp251xfd-ram.h"
17 max = min_t(u8, obj->max, obj->fifo_num * config->fifo_depth); in can_ram_clamp()
18 return clamp(val, obj->min, max); in can_ram_clamp()
26 u8 fifo_num = obj->fifo_num; in can_ram_rounddown_pow_of_two()
32 /* Use 1st FIFO for coalescing, if requested. in can_ram_rounddown_pow_of_two()
34 * Either use complete FIFO (and FIFO Full IRQ) for in can_ram_rounddown_pow_of_two()
35 * coalescing or only half of FIFO (FIFO Half Full in can_ram_rounddown_pow_of_two()
[all …]
|