Lines Matching +full:fixed +full:- +full:header
1 // SPDX-License-Identifier: GPL-2.0 OR MIT
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
12 model = "Hardkernel ODROID-C1";
13 compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
22 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
36 compatible = "gpio-leds";
40 linux,default-trigger = "heartbeat";
41 default-state = "off";
45 p5v0: regulator-p5v0 {
46 compatible = "regulator-fixed";
48 regulator-name = "P5V0";
49 regulator-min-microvolt = <5000000>;
50 regulator-max-microvolt = <5000000>;
53 tflash_vdd: regulator-tflash_vdd {
57 compatible = "regulator-fixed";
59 regulator-name = "TFLASH_VDD";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
63 vin-supply = <&vcc_3v3>;
66 enable-active-high;
69 tf_io: gpio-regulator-tf_io {
70 compatible = "regulator-gpio";
72 regulator-name = "TF_IO";
73 regulator-min-microvolt = <1800000>;
74 regulator-max-microvolt = <3300000>;
76 vin-supply = <&vcc_3v3>;
82 gpios-states = <0>;
88 iio-hwmon {
89 compatible = "iio-hwmon";
90 io-channels = <&saradc 8>;
93 rtc32k_xtal: rtc32k-xtal-clk {
95 compatible = "fixed-clock";
96 clock-frequency = <32768>;
97 clock-output-names = "RTC32K";
98 #clock-cells = <0>;
101 vcc_1v8: regulator-vcc-1v8 {
103 * RICHTEK RT9179 configured for a fixed output voltage of
107 compatible = "regulator-fixed";
109 regulator-name = "VCC1V8";
110 regulator-min-microvolt = <1800000>;
111 regulator-max-microvolt = <1800000>;
113 vin-supply = <&p5v0>;
116 vcc_3v3: regulator-vcc-3v3 {
118 * Monolithic Power Systems MP2161 configured for a fixed
122 compatible = "regulator-fixed";
124 regulator-name = "VCC3V3";
125 regulator-min-microvolt = <3300000>;
126 regulator-max-microvolt = <3300000>;
128 vin-supply = <&p5v0>;
131 vcck: regulator-vcck {
133 compatible = "pwm-regulator";
135 regulator-name = "VCCK";
136 regulator-min-microvolt = <860000>;
137 regulator-max-microvolt = <1140000>;
139 pwm-supply = <&p5v0>;
142 pwm-dutycycle-range = <91 0>;
144 regulator-boot-on;
145 regulator-always-on;
148 vddc_ddr: regulator-vddc-ddr {
150 * Monolithic Power Systems MP2161 configured for a fixed
154 compatible = "regulator-fixed";
156 regulator-name = "DDR_VDDC";
157 regulator-min-microvolt = <1500000>;
158 regulator-max-microvolt = <1500000>;
160 vin-supply = <&p5v0>;
163 vddee: regulator-vddee {
165 compatible = "pwm-regulator";
167 regulator-name = "VDDEE";
168 regulator-min-microvolt = <860000>;
169 regulator-max-microvolt = <1140000>;
171 pwm-supply = <&p5v0>;
174 pwm-dutycycle-range = <91 0>;
176 regulator-boot-on;
177 regulator-always-on;
180 vdd_rtc: regulator-vdd-rtc {
182 * Torex Semiconductor XC6215 configured for a fixed output of
185 compatible = "regulator-fixed";
187 regulator-name = "VDD_RTC";
188 regulator-min-microvolt = <900000>;
189 regulator-max-microvolt = <900000>;
191 vin-supply = <&vcc_3v3>;
196 cpu-supply = <&vcck>;
208 pinctrl-0 = <ð_rgmii_pins>;
209 pinctrl-names = "default";
211 phy-handle = <ð_phy>;
212 phy-mode = "rgmii-id";
214 nvmem-cells = <ðernet_mac_address>;
215 nvmem-cell-names = "mac-address";
218 compatible = "snps,dwmac-mdio";
219 #address-cells = <1>;
220 #size-cells = <0>;
223 eth_phy: ethernet-phy@0 {
226 reset-assert-us = <10000>;
227 reset-deassert-us = <80000>;
228 reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
230 interrupt-parent = <&gpio_intc>;
238 gpio-line-names = /* Bank GPIOX */
239 "J2 Header Pin 35", "J2 Header Pin 36",
240 "J2 Header Pin 32", "J2 Header Pin 31",
241 "J2 Header Pin 29", "J2 Header Pin 18",
242 "J2 Header Pin 22", "J2 Header Pin 16",
243 "J2 Header Pin 23", "J2 Header Pin 21",
244 "J2 Header Pin 19", "J2 Header Pin 33",
245 "J2 Header Pin 8", "J2 Header Pin 10",
246 "J2 Header Pin 15", "J2 Header Pin 13",
247 "J2 Header Pin 24", "J2 Header Pin 26",
250 "J2 Header Pin 7", "", "J2 Header Pin 12",
251 "J2 Header Pin 11", "", "", "",
282 gpio-line-names = "UART TX", "UART RX", "",
284 "USB_OTG_PWREN", "J7 Header Pin 2",
285 "IR_IN", "J7 Header Pin 4",
286 "J7 Header Pin 6", "J7 Header Pin 5",
287 "J7 Header Pin 7", "HDMI_CEC",
291 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
296 usb-hub {
297 gpio-hog;
299 output-high;
300 line-name = "usb-hub-reset";
306 pinctrl-0 = <&ir_recv_pins>;
307 pinctrl-names = "default";
311 mali-supply = <&vddee>;
316 vref-supply = <&vcc_1v8>;
322 pinctrl-0 = <&sdxc_c_pins>;
323 pinctrl-names = "default";
325 bus-width = <8>;
326 max-frequency = <100000000>;
328 disable-wp;
329 cap-mmc-highspeed;
330 mmc-hs200-1_8v;
331 no-sdio;
333 mmc-pwrseq = <&emmc_pwrseq>;
335 vmmc-supply = <&vcc_3v3>;
336 vqmmc-supply = <&vcc_1v8>;
342 pinctrl-0 = <&sd_b_pins>;
343 pinctrl-names = "default";
347 compatible = "mmc-slot";
351 bus-width = <4>;
352 no-sdio;
353 cap-mmc-highspeed;
354 cap-sd-highspeed;
355 disable-wp;
357 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
359 vmmc-supply = <&tflash_vdd>;
360 vqmmc-supply = <&tf_io>;
366 pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
367 pinctrl-names = "default";
369 clock-names = "clkin0", "clkin1";
375 vdd-supply = <&vdd_rtc>;
380 pinctrl-0 = <&uart_ao_a_pins>;
381 pinctrl-names = "default";