Lines Matching +full:35 +full:- +full:dynamic
1 .TH sane\-microtek2 5 "13 Jul 2008" "@PACKAGEVERSION@" "SANE Scanner Access Now Easy"
3 sane\-microtek2 \- SANE backend for Microtek scanners with SCSI-2 command set
6 .B sane\-microtek2
8 provides access to Microtek scanners with a SCSI-2 command set.
12 There exists a different backend for Microtek scanners with SCSI-1 command
28 --------------------------------------------------------------------
56 .IR http://www.sane\-project.org/ .
66 .IR http://penguin-breeder.org/kernel/download/ .
91 \- put the line
97 \- in a terminal (bash) type
101 "scanimage \-l0 \-t0 \-x100 \-y20 2>scan.log >sout.pnm"
108 supported by the scanner in dependence of the scanning-mode and other
113 .B sane\-microtek2
137 is the UNIX path-name for the special device that corresponds to the
149 scanners with SCSI-2 interface. Empty lines and lines starting with
153 for all devices are placed above the device names. Device-specific options
156 option strip-height <n>, the entry in the
166 option strip\-height <n>
168 option no\-backtrack\-option <on/off>
170 option lightlid\-35 <on/off>
172 option toggle\-lamp <on/off>
174 option lineart\-autoadjust <on/off>
176 option backend\-calibration <on/off>
178 option colorbalance\-adjust <on/off>
199 .I option strip\-height <n>
214 .I option no\-backtrack\-option <on/off>
218 .I option lightlid\-35 <on/off>
219 If you use the LightLid-35 transparency adapter you get an advanced
222 .I option toggle\-lamp <on/off>
226 .I option lineart\-autoadjust <on/off>
230 .I option backend\-calibration <on/off>
234 .I option colorbalance\-adjust <on/off>
245 option strip\-height 1.0
249 option no\-backtrack\-option on
255 option lightlid\-35 on
265 option strip\-height 14.0
267 option no\-backtrack\-option on
269 option backend\-calibration on
271 option lightlid\-35 on
273 option toggle\-lamp on
275 option lineart\-autoadjust on
277 option colorbalance\-adjust off
282 In this case all SCSI-Scanners should be detected automatically because of the
293 .I @LIBDIR@/libsane\-microtek2.a
296 .I @LIBDIR@/libsane\-microtek2.so
298 support dynamic loading).