1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 * linux/drivers/char/serial_core.h
4 *
5 * Copyright (C) 2000 Deep Blue Solutions Ltd.
6 */
7 #ifndef LINUX_SERIAL_CORE_H
8 #define LINUX_SERIAL_CORE_H
9
10 #include <linux/bitops.h>
11 #include <linux/compiler.h>
12 #include <linux/console.h>
13 #include <linux/interrupt.h>
14 #include <linux/circ_buf.h>
15 #include <linux/spinlock.h>
16 #include <linux/sched.h>
17 #include <linux/tty.h>
18 #include <linux/mutex.h>
19 #include <linux/sysrq.h>
20 #include <uapi/linux/serial_core.h>
21
22 #ifdef CONFIG_SERIAL_CORE_CONSOLE
23 #define uart_console(port) \
24 ((port)->cons && (port)->cons->index == (port)->line)
25 #else
26 #define uart_console(port) ({ (void)port; 0; })
27 #endif
28
29 struct uart_port;
30 struct serial_struct;
31 struct device;
32 struct gpio_desc;
33
34 /*
35 * This structure describes all the operations that can be done on the
36 * physical hardware. See Documentation/driver-api/serial/driver.rst for details.
37 */
38 struct uart_ops {
39 unsigned int (*tx_empty)(struct uart_port *);
40 void (*set_mctrl)(struct uart_port *, unsigned int mctrl);
41 unsigned int (*get_mctrl)(struct uart_port *);
42 void (*stop_tx)(struct uart_port *);
43 void (*start_tx)(struct uart_port *);
44 void (*throttle)(struct uart_port *);
45 void (*unthrottle)(struct uart_port *);
46 void (*send_xchar)(struct uart_port *, char ch);
47 void (*stop_rx)(struct uart_port *);
48 void (*enable_ms)(struct uart_port *);
49 void (*break_ctl)(struct uart_port *, int ctl);
50 int (*startup)(struct uart_port *);
51 void (*shutdown)(struct uart_port *);
52 void (*flush_buffer)(struct uart_port *);
53 void (*set_termios)(struct uart_port *, struct ktermios *new,
54 struct ktermios *old);
55 void (*set_ldisc)(struct uart_port *, struct ktermios *);
56 void (*pm)(struct uart_port *, unsigned int state,
57 unsigned int oldstate);
58
59 /*
60 * Return a string describing the type of the port
61 */
62 const char *(*type)(struct uart_port *);
63
64 /*
65 * Release IO and memory resources used by the port.
66 * This includes iounmap if necessary.
67 */
68 void (*release_port)(struct uart_port *);
69
70 /*
71 * Request IO and memory resources used by the port.
72 * This includes iomapping the port if necessary.
73 */
74 int (*request_port)(struct uart_port *);
75 void (*config_port)(struct uart_port *, int);
76 int (*verify_port)(struct uart_port *, struct serial_struct *);
77 int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
78 #ifdef CONFIG_CONSOLE_POLL
79 int (*poll_init)(struct uart_port *);
80 void (*poll_put_char)(struct uart_port *, unsigned char);
81 int (*poll_get_char)(struct uart_port *);
82 #endif
83 };
84
85 #define NO_POLL_CHAR 0x00ff0000
86 #define UART_CONFIG_TYPE (1 << 0)
87 #define UART_CONFIG_IRQ (1 << 1)
88
89 struct uart_icount {
90 __u32 cts;
91 __u32 dsr;
92 __u32 rng;
93 __u32 dcd;
94 __u32 rx;
95 __u32 tx;
96 __u32 frame;
97 __u32 overrun;
98 __u32 parity;
99 __u32 brk;
100 __u32 buf_overrun;
101 };
102
103 typedef u64 __bitwise upf_t;
104 typedef unsigned int __bitwise upstat_t;
105
106 struct uart_port {
107 spinlock_t lock; /* port lock */
108 unsigned long iobase; /* in/out[bwl] */
109 unsigned char __iomem *membase; /* read/write[bwl] */
110 unsigned int (*serial_in)(struct uart_port *, int);
111 void (*serial_out)(struct uart_port *, int, int);
112 void (*set_termios)(struct uart_port *,
113 struct ktermios *new,
114 struct ktermios *old);
115 void (*set_ldisc)(struct uart_port *,
116 struct ktermios *);
117 unsigned int (*get_mctrl)(struct uart_port *);
118 void (*set_mctrl)(struct uart_port *, unsigned int);
119 unsigned int (*get_divisor)(struct uart_port *,
120 unsigned int baud,
121 unsigned int *frac);
122 void (*set_divisor)(struct uart_port *,
123 unsigned int baud,
124 unsigned int quot,
125 unsigned int quot_frac);
126 int (*startup)(struct uart_port *port);
127 void (*shutdown)(struct uart_port *port);
128 void (*throttle)(struct uart_port *port);
129 void (*unthrottle)(struct uart_port *port);
130 int (*handle_irq)(struct uart_port *);
131 void (*pm)(struct uart_port *, unsigned int state,
132 unsigned int old);
133 void (*handle_break)(struct uart_port *);
134 int (*rs485_config)(struct uart_port *,
135 struct serial_rs485 *rs485);
136 int (*iso7816_config)(struct uart_port *,
137 struct serial_iso7816 *iso7816);
138 unsigned int irq; /* irq number */
139 unsigned long irqflags; /* irq flags */
140 unsigned int uartclk; /* base uart clock */
141 unsigned int fifosize; /* tx fifo size */
142 unsigned char x_char; /* xon/xoff char */
143 unsigned char regshift; /* reg offset shift */
144 unsigned char iotype; /* io access style */
145 unsigned char quirks; /* internal quirks */
146
147 #define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */
148 #define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */
149 #define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */
150 #define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */
151 #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */
152 #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */
153 #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */
154 #define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */
155
156 /* quirks must be updated while holding port mutex */
157 #define UPQ_NO_TXEN_TEST BIT(0)
158
159 unsigned int read_status_mask; /* driver specific */
160 unsigned int ignore_status_mask; /* driver specific */
161 struct uart_state *state; /* pointer to parent state */
162 struct uart_icount icount; /* statistics */
163
164 struct console *cons; /* struct console, if any */
165 /* flags must be updated while holding port mutex */
166 upf_t flags;
167
168 /*
169 * These flags must be equivalent to the flags defined in
170 * include/uapi/linux/tty_flags.h which are the userspace definitions
171 * assigned from the serial_struct flags in uart_set_info()
172 * [for bit definitions in the UPF_CHANGE_MASK]
173 *
174 * Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable
175 * The remaining bits are serial-core specific and not modifiable by
176 * userspace.
177 */
178 #define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ )
179 #define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ )
180 #define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ )
181 #define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ )
182 #define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ )
183 #define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ )
184 #define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ )
185 #define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ )
186 #define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ )
187 #define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ )
188 #define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ )
189 #define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ )
190 #define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ )
191 #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ )
192
193 #define UPF_NO_THRE_TEST ((__force upf_t) (1 << 19))
194 /* Port has hardware-assisted h/w flow control */
195 #define UPF_AUTO_CTS ((__force upf_t) (1 << 20))
196 #define UPF_AUTO_RTS ((__force upf_t) (1 << 21))
197 #define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS))
198 /* Port has hardware-assisted s/w flow control */
199 #define UPF_SOFT_FLOW ((__force upf_t) (1 << 22))
200 #define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
201 #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
202 #define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
203 #define UPF_BUG_THRE ((__force upf_t) (1 << 26))
204 /* The exact UART type is known and should not be probed. */
205 #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
206 #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
207 #define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
208 #define UPF_DEAD ((__force upf_t) (1 << 30))
209 #define UPF_IOREMAP ((__force upf_t) (1 << 31))
210 #define UPF_FULL_PROBE ((__force upf_t) (1ULL << 32))
211
212 #define __UPF_CHANGE_MASK 0x17fff
213 #define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK)
214 #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
215
216 #if __UPF_CHANGE_MASK > ASYNC_FLAGS
217 #error Change mask not equivalent to userspace-visible bit defines
218 #endif
219
220 /*
221 * Must hold termios_rwsem, port mutex and port lock to change;
222 * can hold any one lock to read.
223 */
224 upstat_t status;
225
226 #define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0))
227 #define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1))
228 #define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2))
229 #define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3))
230 #define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4))
231 #define UPSTAT_SYNC_FIFO ((__force upstat_t) (1 << 5))
232
233 int hw_stopped; /* sw-assisted CTS flow state */
234 unsigned int mctrl; /* current modem ctrl settings */
235 unsigned int timeout; /* character-based timeout */
236 unsigned int type; /* port type */
237 const struct uart_ops *ops;
238 unsigned int custom_divisor;
239 unsigned int line; /* port index */
240 unsigned int minor;
241 resource_size_t mapbase; /* for ioremap */
242 resource_size_t mapsize;
243 struct device *dev; /* parent device */
244
245 unsigned long sysrq; /* sysrq timeout */
246 unsigned int sysrq_ch; /* char for sysrq */
247 unsigned char has_sysrq;
248 unsigned char sysrq_seq; /* index in sysrq_toggle_seq */
249
250 unsigned char hub6; /* this should be in the 8250 driver */
251 unsigned char suspended;
252 unsigned char console_reinit;
253 const char *name; /* port name */
254 struct attribute_group *attr_group; /* port specific attributes */
255 const struct attribute_group **tty_groups; /* all attributes (serial core use only) */
256 struct serial_rs485 rs485;
257 const struct serial_rs485 *rs485_supported; /* Supported mask for serial_rs485 */
258 struct gpio_desc *rs485_term_gpio; /* enable RS485 bus termination */
259 struct serial_iso7816 iso7816;
260 void *private_data; /* generic platform data pointer */
261 };
262
serial_port_in(struct uart_port * up,int offset)263 static inline int serial_port_in(struct uart_port *up, int offset)
264 {
265 return up->serial_in(up, offset);
266 }
267
serial_port_out(struct uart_port * up,int offset,int value)268 static inline void serial_port_out(struct uart_port *up, int offset, int value)
269 {
270 up->serial_out(up, offset, value);
271 }
272
273 /**
274 * enum uart_pm_state - power states for UARTs
275 * @UART_PM_STATE_ON: UART is powered, up and operational
276 * @UART_PM_STATE_OFF: UART is powered off
277 * @UART_PM_STATE_UNDEFINED: sentinel
278 */
279 enum uart_pm_state {
280 UART_PM_STATE_ON = 0,
281 UART_PM_STATE_OFF = 3, /* number taken from ACPI */
282 UART_PM_STATE_UNDEFINED,
283 };
284
285 /*
286 * This is the state information which is persistent across opens.
287 */
288 struct uart_state {
289 struct tty_port port;
290
291 enum uart_pm_state pm_state;
292 struct circ_buf xmit;
293
294 atomic_t refcount;
295 wait_queue_head_t remove_wait;
296 struct uart_port *uart_port;
297 };
298
299 #define UART_XMIT_SIZE PAGE_SIZE
300
301
302 /* number of characters left in xmit buffer before we ask for more */
303 #define WAKEUP_CHARS 256
304
305 /**
306 * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars
307 * @up: uart_port structure describing the port
308 * @chars: number of characters sent
309 *
310 * This function advances the tail of circular xmit buffer by the number of
311 * @chars transmitted and handles accounting of transmitted bytes (into
312 * @up's icount.tx).
313 */
uart_xmit_advance(struct uart_port * up,unsigned int chars)314 static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars)
315 {
316 struct circ_buf *xmit = &up->state->xmit;
317
318 xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1);
319 up->icount.tx += chars;
320 }
321
322 struct module;
323 struct tty_driver;
324
325 struct uart_driver {
326 struct module *owner;
327 const char *driver_name;
328 const char *dev_name;
329 int major;
330 int minor;
331 int nr;
332 struct console *cons;
333
334 /*
335 * these are private; the low level driver should not
336 * touch these; they should be initialised to NULL
337 */
338 struct uart_state *state;
339 struct tty_driver *tty_driver;
340 };
341
342 void uart_write_wakeup(struct uart_port *port);
343
344 /*
345 * Baud rate helpers.
346 */
347 void uart_update_timeout(struct uart_port *port, unsigned int cflag,
348 unsigned int baud);
349 unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
350 struct ktermios *old, unsigned int min,
351 unsigned int max);
352 unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud);
353
354 /* Base timer interval for polling */
uart_poll_timeout(struct uart_port * port)355 static inline int uart_poll_timeout(struct uart_port *port)
356 {
357 int timeout = port->timeout;
358
359 return timeout > 6 ? (timeout / 2 - 2) : 1;
360 }
361
362 /*
363 * Console helpers.
364 */
365 struct earlycon_device {
366 struct console *con;
367 struct uart_port port;
368 char options[16]; /* e.g., 115200n8 */
369 unsigned int baud;
370 };
371
372 struct earlycon_id {
373 char name[15];
374 char name_term; /* In case compiler didn't '\0' term name */
375 char compatible[128];
376 int (*setup)(struct earlycon_device *, const char *options);
377 };
378
379 extern const struct earlycon_id *__earlycon_table[];
380 extern const struct earlycon_id *__earlycon_table_end[];
381
382 #if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)
383 #define EARLYCON_USED_OR_UNUSED __used
384 #else
385 #define EARLYCON_USED_OR_UNUSED __maybe_unused
386 #endif
387
388 #define _OF_EARLYCON_DECLARE(_name, compat, fn, unique_id) \
389 static const struct earlycon_id unique_id \
390 EARLYCON_USED_OR_UNUSED __initconst \
391 = { .name = __stringify(_name), \
392 .compatible = compat, \
393 .setup = fn }; \
394 static const struct earlycon_id EARLYCON_USED_OR_UNUSED \
395 __section("__earlycon_table") \
396 * const __PASTE(__p, unique_id) = &unique_id
397
398 #define OF_EARLYCON_DECLARE(_name, compat, fn) \
399 _OF_EARLYCON_DECLARE(_name, compat, fn, \
400 __UNIQUE_ID(__earlycon_##_name))
401
402 #define EARLYCON_DECLARE(_name, fn) OF_EARLYCON_DECLARE(_name, "", fn)
403
404 extern int of_setup_earlycon(const struct earlycon_id *match,
405 unsigned long node,
406 const char *options);
407
408 #ifdef CONFIG_SERIAL_EARLYCON
409 extern bool earlycon_acpi_spcr_enable __initdata;
410 int setup_earlycon(char *buf);
411 #else
412 static const bool earlycon_acpi_spcr_enable EARLYCON_USED_OR_UNUSED;
setup_earlycon(char * buf)413 static inline int setup_earlycon(char *buf) { return 0; }
414 #endif
415
uart_console_enabled(struct uart_port * port)416 static inline bool uart_console_enabled(struct uart_port *port)
417 {
418 return uart_console(port) && (port->cons->flags & CON_ENABLED);
419 }
420
421 struct uart_port *uart_get_console(struct uart_port *ports, int nr,
422 struct console *c);
423 int uart_parse_earlycon(char *p, unsigned char *iotype, resource_size_t *addr,
424 char **options);
425 void uart_parse_options(const char *options, int *baud, int *parity, int *bits,
426 int *flow);
427 int uart_set_options(struct uart_port *port, struct console *co, int baud,
428 int parity, int bits, int flow);
429 struct tty_driver *uart_console_device(struct console *co, int *index);
430 void uart_console_write(struct uart_port *port, const char *s,
431 unsigned int count,
432 void (*putchar)(struct uart_port *, int));
433
434 /*
435 * Port/driver registration/removal
436 */
437 int uart_register_driver(struct uart_driver *uart);
438 void uart_unregister_driver(struct uart_driver *uart);
439 int uart_add_one_port(struct uart_driver *reg, struct uart_port *port);
440 int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
441 int uart_match_port(struct uart_port *port1, struct uart_port *port2);
442
443 /*
444 * Power Management
445 */
446 int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
447 int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
448
449 #define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
450 #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
451
452 #define uart_circ_chars_pending(circ) \
453 (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
454
455 #define uart_circ_chars_free(circ) \
456 (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
457
uart_tx_stopped(struct uart_port * port)458 static inline int uart_tx_stopped(struct uart_port *port)
459 {
460 struct tty_struct *tty = port->state->port.tty;
461 if ((tty && tty->stopped) || port->hw_stopped)
462 return 1;
463 return 0;
464 }
465
uart_cts_enabled(struct uart_port * uport)466 static inline bool uart_cts_enabled(struct uart_port *uport)
467 {
468 return !!(uport->status & UPSTAT_CTS_ENABLE);
469 }
470
uart_softcts_mode(struct uart_port * uport)471 static inline bool uart_softcts_mode(struct uart_port *uport)
472 {
473 upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS;
474
475 return ((uport->status & mask) == UPSTAT_CTS_ENABLE);
476 }
477
478 /*
479 * The following are helper functions for the low level drivers.
480 */
481
482 extern void uart_handle_dcd_change(struct uart_port *uport,
483 unsigned int status);
484 extern void uart_handle_cts_change(struct uart_port *uport,
485 unsigned int status);
486
487 extern void uart_insert_char(struct uart_port *port, unsigned int status,
488 unsigned int overrun, unsigned int ch, unsigned int flag);
489
490 void uart_xchar_out(struct uart_port *uport, int offset);
491
492 #ifdef CONFIG_MAGIC_SYSRQ_SERIAL
493 #define SYSRQ_TIMEOUT (HZ * 5)
494
495 bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch);
496
uart_handle_sysrq_char(struct uart_port * port,unsigned int ch)497 static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
498 {
499 if (!port->sysrq)
500 return 0;
501
502 if (ch && time_before(jiffies, port->sysrq)) {
503 if (sysrq_mask()) {
504 handle_sysrq(ch);
505 port->sysrq = 0;
506 return 1;
507 }
508 if (uart_try_toggle_sysrq(port, ch))
509 return 1;
510 }
511 port->sysrq = 0;
512
513 return 0;
514 }
515
uart_prepare_sysrq_char(struct uart_port * port,unsigned int ch)516 static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
517 {
518 if (!port->sysrq)
519 return 0;
520
521 if (ch && time_before(jiffies, port->sysrq)) {
522 if (sysrq_mask()) {
523 port->sysrq_ch = ch;
524 port->sysrq = 0;
525 return 1;
526 }
527 if (uart_try_toggle_sysrq(port, ch))
528 return 1;
529 }
530 port->sysrq = 0;
531
532 return 0;
533 }
534
uart_unlock_and_check_sysrq(struct uart_port * port,unsigned long irqflags)535 static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
536 {
537 int sysrq_ch;
538
539 if (!port->has_sysrq) {
540 spin_unlock_irqrestore(&port->lock, irqflags);
541 return;
542 }
543
544 sysrq_ch = port->sysrq_ch;
545 port->sysrq_ch = 0;
546
547 spin_unlock_irqrestore(&port->lock, irqflags);
548
549 if (sysrq_ch)
550 handle_sysrq(sysrq_ch);
551 }
552 #else /* CONFIG_MAGIC_SYSRQ_SERIAL */
uart_handle_sysrq_char(struct uart_port * port,unsigned int ch)553 static inline int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
554 {
555 return 0;
556 }
uart_prepare_sysrq_char(struct uart_port * port,unsigned int ch)557 static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
558 {
559 return 0;
560 }
uart_unlock_and_check_sysrq(struct uart_port * port,unsigned long irqflags)561 static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
562 {
563 spin_unlock_irqrestore(&port->lock, irqflags);
564 }
565 #endif /* CONFIG_MAGIC_SYSRQ_SERIAL */
566
567 /*
568 * We do the SysRQ and SAK checking like this...
569 */
uart_handle_break(struct uart_port * port)570 static inline int uart_handle_break(struct uart_port *port)
571 {
572 struct uart_state *state = port->state;
573
574 if (port->handle_break)
575 port->handle_break(port);
576
577 #ifdef CONFIG_MAGIC_SYSRQ_SERIAL
578 if (port->has_sysrq && uart_console(port)) {
579 if (!port->sysrq) {
580 port->sysrq = jiffies + SYSRQ_TIMEOUT;
581 return 1;
582 }
583 port->sysrq = 0;
584 }
585 #endif
586 if (port->flags & UPF_SAK)
587 do_SAK(state->port.tty);
588 return 0;
589 }
590
591 /*
592 * UART_ENABLE_MS - determine if port should enable modem status irqs
593 */
594 #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
595 (cflag) & CRTSCTS || \
596 !((cflag) & CLOCAL))
597
598 int uart_get_rs485_mode(struct uart_port *port);
599 #endif /* LINUX_SERIAL_CORE_H */
600