| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/leds/ |
| D | leds-pm8058.txt | 26 "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
27 "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
28 "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
38 pmicintc: pmic@0 {
42 reg = <0x48>;
48 reg = <0x131>;
54 reg = <0x132>;
61 reg = <0x133>;
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/leds/ |
| D | qcom,pm8058-led.yaml | 48 #size-cells = <0>;
52 reg = <0x131>;
|
| /kernel/linux/linux-5.10/drivers/regulator/ |
| D | mt6360-regulator.c | 19 MT6360_REGULATOR_BUCK1 = 0,
127 REGULATOR_LINEAR_RANGE(300000, 0x00, 0xc7, 5000),
128 REGULATOR_LINEAR_RANGE(1300000, 0xc8, 0xff, 0),
132 REGULATOR_LINEAR_RANGE(500000, 0x00, 0x09, 10000),
133 REGULATOR_LINEAR_RANGE(600000, 0x0a, 0x10, 0),
134 REGULATOR_LINEAR_RANGE(610000, 0x11, 0x19, 10000),
135 REGULATOR_LINEAR_RANGE(700000, 0x1a, 0x20, 0),
136 REGULATOR_LINEAR_RANGE(710000, 0x21, 0x29, 10000),
137 REGULATOR_LINEAR_RANGE(800000, 0x2a, 0x30, 0),
138 REGULATOR_LINEAR_RANGE(810000, 0x31, 0x39, 10000),
[all …]
|
| /kernel/linux/linux-6.6/drivers/regulator/ |
| D | mt6360-regulator.c | 19 MT6360_REGULATOR_BUCK1 = 0,
127 REGULATOR_LINEAR_RANGE(300000, 0x00, 0xc7, 5000),
128 REGULATOR_LINEAR_RANGE(1300000, 0xc8, 0xff, 0),
132 REGULATOR_LINEAR_RANGE(500000, 0x00, 0x09, 10000),
133 REGULATOR_LINEAR_RANGE(600000, 0x0a, 0x10, 0),
134 REGULATOR_LINEAR_RANGE(610000, 0x11, 0x19, 10000),
135 REGULATOR_LINEAR_RANGE(700000, 0x1a, 0x20, 0),
136 REGULATOR_LINEAR_RANGE(710000, 0x21, 0x29, 10000),
137 REGULATOR_LINEAR_RANGE(800000, 0x2a, 0x30, 0),
138 REGULATOR_LINEAR_RANGE(810000, 0x31, 0x39, 10000),
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/ |
| D | phyreg_n.h | 6 #define NPHY_TBL_ID_GAIN1 0
27 #define NPHY_TO_BPHY_OFF 0xc00
29 #define NPHY_BandControl_currentBand 0x0001
30 #define RFCC_CHIP0_PU 0x0400
31 #define RFCC_POR_FORCE 0x0040
32 #define RFCC_OE_POR_FORCE 0x0080
33 #define NPHY_RfctrlIntc_override_OFF 0
38 #define RIFS_ENABLE 0x80
39 #define BPHY_BAND_SEL_UP20 0x10
40 #define NPHY_MLenable 0x02
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/ |
| D | phyreg_n.h | 6 #define NPHY_TBL_ID_GAIN1 0
27 #define NPHY_TO_BPHY_OFF 0xc00
29 #define NPHY_BandControl_currentBand 0x0001
30 #define RFCC_CHIP0_PU 0x0400
31 #define RFCC_POR_FORCE 0x0040
32 #define RFCC_OE_POR_FORCE 0x0080
33 #define NPHY_RfctrlIntc_override_OFF 0
38 #define RIFS_ENABLE 0x80
39 #define BPHY_BAND_SEL_UP20 0x10
40 #define NPHY_MLenable 0x02
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/mellanox/mlxsw/ |
| D | trap.h | 9 MLXSW_TRAP_ID_FDB_MC = 0x01,
10 MLXSW_TRAP_ID_ETHEMAD = 0x05,
12 MLXSW_TRAP_ID_STP = 0x10,
13 MLXSW_TRAP_ID_LACP = 0x11,
14 MLXSW_TRAP_ID_EAPOL = 0x12,
15 MLXSW_TRAP_ID_LLDP = 0x13,
16 MLXSW_TRAP_ID_MMRP = 0x14,
17 MLXSW_TRAP_ID_MVRP = 0x15,
18 MLXSW_TRAP_ID_RPVST = 0x16,
19 MLXSW_TRAP_ID_DHCP = 0x19,
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/mellanox/mlxsw/ |
| D | trap.h | 9 MLXSW_TRAP_ID_FDB_MC = 0x01,
10 MLXSW_TRAP_ID_ETHEMAD = 0x05,
12 MLXSW_TRAP_ID_STP = 0x10,
13 MLXSW_TRAP_ID_LACP = 0x11,
14 MLXSW_TRAP_ID_EAPOL = 0x12,
15 MLXSW_TRAP_ID_LLDP = 0x13,
16 MLXSW_TRAP_ID_MMRP = 0x14,
17 MLXSW_TRAP_ID_MVRP = 0x15,
18 MLXSW_TRAP_ID_RPVST = 0x16,
19 MLXSW_TRAP_ID_DHCP = 0x19,
[all …]
|
| /kernel/linux/linux-5.10/drivers/char/hw_random/ |
| D | n2rng.h | 11 #define RNG_v1_CTL_WAIT 0x0000000001fffe00ULL /* Minimum wait time */
13 #define RNG_v1_CTL_BYPASS 0x0000000000000100ULL /* VCO voltage source */
14 #define RNG_v1_CTL_VCO 0x00000000000000c0ULL /* VCO rate control */
16 #define RNG_v1_CTL_ASEL 0x0000000000000030ULL /* Analog MUX select */
21 #define RNG_CTL_LFSR 0x0000000000000008ULL /* Use LFSR or plain shift */
22 #define RNG_CTL_ES3 0x0000000000000004ULL /* Enable entropy source 3 */
23 #define RNG_CTL_ES2 0x0000000000000002ULL /* Enable entropy source 2 */
24 #define RNG_CTL_ES1 0x0000000000000001ULL /* Enable entropy source 1 */
27 #define RNG_v2_CTL_WAIT 0x0000000007fff800ULL /* Minimum wait time */
29 #define RNG_v2_CTL_BYPASS 0x0000000000000400ULL /* VCO voltage source */
[all …]
|
| /kernel/linux/linux-6.6/drivers/char/hw_random/ |
| D | n2rng.h | 11 #define RNG_v1_CTL_WAIT 0x0000000001fffe00ULL /* Minimum wait time */
13 #define RNG_v1_CTL_BYPASS 0x0000000000000100ULL /* VCO voltage source */
14 #define RNG_v1_CTL_VCO 0x00000000000000c0ULL /* VCO rate control */
16 #define RNG_v1_CTL_ASEL 0x0000000000000030ULL /* Analog MUX select */
21 #define RNG_CTL_LFSR 0x0000000000000008ULL /* Use LFSR or plain shift */
22 #define RNG_CTL_ES3 0x0000000000000004ULL /* Enable entropy source 3 */
23 #define RNG_CTL_ES2 0x0000000000000002ULL /* Enable entropy source 2 */
24 #define RNG_CTL_ES1 0x0000000000000001ULL /* Enable entropy source 1 */
27 #define RNG_v2_CTL_WAIT 0x0000000007fff800ULL /* Minimum wait time */
29 #define RNG_v2_CTL_BYPASS 0x0000000000000400ULL /* VCO voltage source */
[all …]
|
| /kernel/linux/linux-5.10/arch/sparc/crypto/ |
| D | opcodes.h | 9 #define FPD_ENCODE(x) (((x) >> 5) | ((x) & ~(0x20)))
12 #define RS2(x) (FPD_ENCODE(x) << 0)
15 #define IMM5_0(x) ((x) << 0)
19 .word (F3F(2,0x36,0x147)|RS1(a)|RS2(b)|RD(c));
22 .word 0x81b02800;
24 .word 0x81b02820;
26 .word 0x81b02840;
28 .word 0x81b02860;
31 .word (F3F(2, 0x19, 0)|RS1(a)|RS2(b)|RS3(c)|RD(d));
33 .word (F3F(2, 0x19, 1)|RS1(a)|RS2(b)|RS3(c)|RD(d));
[all …]
|
| /kernel/linux/linux-6.6/arch/sparc/crypto/ |
| D | opcodes.h | 9 #define FPD_ENCODE(x) (((x) >> 5) | ((x) & ~(0x20)))
12 #define RS2(x) (FPD_ENCODE(x) << 0)
15 #define IMM5_0(x) ((x) << 0)
19 .word (F3F(2,0x36,0x147)|RS1(a)|RS2(b)|RD(c));
22 .word 0x81b02800;
24 .word 0x81b02820;
26 .word 0x81b02840;
28 .word 0x81b02860;
31 .word (F3F(2, 0x19, 0)|RS1(a)|RS2(b)|RS3(c)|RD(d));
33 .word (F3F(2, 0x19, 1)|RS1(a)|RS2(b)|RS3(c)|RD(d));
[all …]
|
| /kernel/linux/linux-6.6/drivers/scsi/qla2xxx/ |
| D | qla_devtbl.h | 2 #define QLA_MODEL_NAMES 0x5C
8 "QLA2340", "133MHz PCI-X to 2Gb FC, Single Channel", /* 0x100 */
9 "QLA2342", "133MHz PCI-X to 2Gb FC, Dual Channel", /* 0x101 */
10 "QLA2344", "133MHz PCI-X to 2Gb FC, Quad Channel", /* 0x102 */
11 "QCP2342", "cPCI to 2Gb FC, Dual Channel", /* 0x103 */
12 "QSB2340", "SBUS to 2Gb FC, Single Channel", /* 0x104 */
13 "QSB2342", "SBUS to 2Gb FC, Dual Channel", /* 0x105 */
14 "QLA2310", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x106 */
15 "QLA2332", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x107 */
16 "QCP2332", "Sun cPCI to 2Gb FC, Dual Channel", /* 0x108 */
[all …]
|
| /kernel/linux/linux-5.10/drivers/scsi/qla2xxx/ |
| D | qla_devtbl.h | 2 #define QLA_MODEL_NAMES 0x5C
8 "QLA2340", "133MHz PCI-X to 2Gb FC, Single Channel", /* 0x100 */
9 "QLA2342", "133MHz PCI-X to 2Gb FC, Dual Channel", /* 0x101 */
10 "QLA2344", "133MHz PCI-X to 2Gb FC, Quad Channel", /* 0x102 */
11 "QCP2342", "cPCI to 2Gb FC, Dual Channel", /* 0x103 */
12 "QSB2340", "SBUS to 2Gb FC, Single Channel", /* 0x104 */
13 "QSB2342", "SBUS to 2Gb FC, Dual Channel", /* 0x105 */
14 "QLA2310", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x106 */
15 "QLA2332", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x107 */
16 "QCP2332", "Sun cPCI to 2Gb FC, Dual Channel", /* 0x108 */
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/radeon/ |
| D | ppsmc.h | 28 #define PPSMC_SWSTATE_FLAG_DC 0x01
29 #define PPSMC_SWSTATE_FLAG_UVD 0x02
30 #define PPSMC_SWSTATE_FLAG_VCE 0x04
31 #define PPSMC_SWSTATE_FLAG_PCIE_X1 0x08
33 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00
34 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01
35 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff
37 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01
38 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02
39 #define PPSMC_SYSTEMFLAG_GDDR5 0x04
[all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/radeon/ |
| D | ppsmc.h | 28 #define PPSMC_SWSTATE_FLAG_DC 0x01
29 #define PPSMC_SWSTATE_FLAG_UVD 0x02
30 #define PPSMC_SWSTATE_FLAG_VCE 0x04
31 #define PPSMC_SWSTATE_FLAG_PCIE_X1 0x08
33 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00
34 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01
35 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff
37 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01
38 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02
39 #define PPSMC_SYSTEMFLAG_GDDR5 0x04
[all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/amd/pm/legacy-dpm/ |
| D | ppsmc.h | 28 #define PPSMC_SWSTATE_FLAG_DC 0x01
29 #define PPSMC_SWSTATE_FLAG_UVD 0x02
30 #define PPSMC_SWSTATE_FLAG_VCE 0x04
31 #define PPSMC_SWSTATE_FLAG_PCIE_X1 0x08
33 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00
34 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01
35 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff
37 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01
38 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02
39 #define PPSMC_SYSTEMFLAG_GDDR5 0x04
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/amd/pm/powerplay/ |
| D | ppsmc.h | 28 #define PPSMC_SWSTATE_FLAG_DC 0x01
29 #define PPSMC_SWSTATE_FLAG_UVD 0x02
30 #define PPSMC_SWSTATE_FLAG_VCE 0x04
31 #define PPSMC_SWSTATE_FLAG_PCIE_X1 0x08
33 #define PPSMC_THERMAL_PROTECT_TYPE_INTERNAL 0x00
34 #define PPSMC_THERMAL_PROTECT_TYPE_EXTERNAL 0x01
35 #define PPSMC_THERMAL_PROTECT_TYPE_NONE 0xff
37 #define PPSMC_SYSTEMFLAG_GPIO_DC 0x01
38 #define PPSMC_SYSTEMFLAG_STEPVDDC 0x02
39 #define PPSMC_SYSTEMFLAG_GDDR5 0x04
[all …]
|
| /kernel/linux/linux-6.6/drivers/hid/ |
| D | wacom_wac.h | 37 #define STYLUS_DEVICE_ID 0x02
38 #define TOUCH_DEVICE_ID 0x03
39 #define CURSOR_DEVICE_ID 0x06
40 #define ERASER_DEVICE_ID 0x0A
41 #define PAD_DEVICE_ID 0x0F
72 #define WAC_CMD_WL_LED_CONTROL 0x03
73 #define WAC_CMD_LED_CONTROL 0x20
74 #define WAC_CMD_ICON_START 0x21
75 #define WAC_CMD_ICON_XFER 0x23
76 #define WAC_CMD_ICON_BT_XFER 0x26
[all …]
|
| /kernel/linux/linux-5.10/drivers/hid/ |
| D | wacom_wac.h | 39 #define STYLUS_DEVICE_ID 0x02
40 #define TOUCH_DEVICE_ID 0x03
41 #define CURSOR_DEVICE_ID 0x06
42 #define ERASER_DEVICE_ID 0x0A
43 #define PAD_DEVICE_ID 0x0F
74 #define WAC_CMD_WL_LED_CONTROL 0x03
75 #define WAC_CMD_LED_CONTROL 0x20
76 #define WAC_CMD_ICON_START 0x21
77 #define WAC_CMD_ICON_XFER 0x23
78 #define WAC_CMD_ICON_BT_XFER 0x26
[all …]
|
| /kernel/linux/linux-6.6/drivers/perf/arm_cspmu/ |
| D | nvidia_cspmu.c | 14 #define NV_PCIE_FILTER_ID_MASK GENMASK_ULL(NV_PCIE_PORT_COUNT - 1, 0)
17 #define NV_NVL_C2C_FILTER_ID_MASK GENMASK_ULL(NV_NVL_C2C_PORT_COUNT - 1, 0)
20 #define NV_CNVL_FILTER_ID_MASK GENMASK_ULL(NV_CNVL_PORT_COUNT - 1, 0)
22 #define NV_GENERIC_FILTER_ID_MASK GENMASK_ULL(31, 0)
24 #define NV_PRODID_MASK GENMASK(31, 0)
26 #define NV_FORMAT_NAME_GENERIC 0
48 ARM_CSPMU_EVENT_ATTR(bus_cycles, 0x1d),
50 ARM_CSPMU_EVENT_ATTR(scf_cache_allocate, 0xF0),
51 ARM_CSPMU_EVENT_ATTR(scf_cache_refill, 0xF1),
52 ARM_CSPMU_EVENT_ATTR(scf_cache, 0xF2),
[all …]
|
| /kernel/linux/linux-5.10/include/linux/mfd/da9062/ |
| D | registers.h | 9 #define DA9062_PMIC_DEVICE_ID 0x62
10 #define DA9062_PMIC_VARIANT_MRC_AA 0x01
11 #define DA9062_PMIC_VARIANT_VRC_DA9061 0x01
12 #define DA9062_PMIC_VARIANT_VRC_DA9062 0x02
20 #define DA9062AA_PAGE_CON 0x000
21 #define DA9062AA_STATUS_A 0x001
22 #define DA9062AA_STATUS_B 0x002
23 #define DA9062AA_STATUS_D 0x004
24 #define DA9062AA_FAULT_LOG 0x005
25 #define DA9062AA_EVENT_A 0x006
[all …]
|
| /kernel/linux/linux-6.6/include/linux/mfd/da9062/ |
| D | registers.h | 9 #define DA9062_PMIC_DEVICE_ID 0x62
10 #define DA9062_PMIC_VARIANT_MRC_AA 0x01
11 #define DA9062_PMIC_VARIANT_VRC_DA9061 0x01
12 #define DA9062_PMIC_VARIANT_VRC_DA9062 0x02
20 #define DA9062AA_PAGE_CON 0x000
21 #define DA9062AA_STATUS_A 0x001
22 #define DA9062AA_STATUS_B 0x002
23 #define DA9062AA_STATUS_D 0x004
24 #define DA9062AA_FAULT_LOG 0x005
25 #define DA9062AA_EVENT_A 0x006
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/broadcom/b43/ |
| D | radio_2057.h | 9 #define R2057_DACBUF_VINCM_CORE0 0x000
10 #define R2057_IDCODE 0x001
11 #define R2057_RCCAL_MASTER 0x002
12 #define R2057_RCCAL_CAP_SIZE 0x003
13 #define R2057_RCAL_CONFIG 0x004
14 #define R2057_GPAIO_CONFIG 0x005
15 #define R2057_GPAIO_SEL1 0x006
16 #define R2057_GPAIO_SEL0 0x007
17 #define R2057_CLPO_CONFIG 0x008
18 #define R2057_BANDGAP_CONFIG 0x009
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/wireless/broadcom/b43/ |
| D | radio_2057.h | 9 #define R2057_DACBUF_VINCM_CORE0 0x000
10 #define R2057_IDCODE 0x001
11 #define R2057_RCCAL_MASTER 0x002
12 #define R2057_RCCAL_CAP_SIZE 0x003
13 #define R2057_RCAL_CONFIG 0x004
14 #define R2057_GPAIO_CONFIG 0x005
15 #define R2057_GPAIO_SEL1 0x006
16 #define R2057_GPAIO_SEL0 0x007
17 #define R2057_CLPO_CONFIG 0x008
18 #define R2057_BANDGAP_CONFIG 0x009
[all …]
|