Home
last modified time | relevance | path

Searched +full:0 +full:x2800 (Results 1 – 25 of 278) sorted by relevance

12345678910>>...12

/kernel/linux/linux-5.10/arch/powerpc/boot/dts/fsl/
Dmpc8548cds.dtsi36 nor@0,0 {
40 reg = <0x0 0x0 0x01000000>;
44 partition@0 {
45 reg = <0x0 0x0b00000>;
50 reg = <0x0b00000 0x0400000>;
55 reg = <0x0f00000 0x060000>;
60 reg = <0x0f60000 0x020000>;
66 reg = <0x0f80000 0x080000>;
72 board-control@1,0 {
74 reg = <0x1 0x0 0x1000>;
[all …]
Dmpc8540ads.dts29 #size-cells = <0>;
31 PowerPC,8540@0 {
33 reg = <0x0>;
36 d-cache-size = <0x8000>; // L1, 32K
37 i-cache-size = <0x8000>; // L1, 32K
38 timebase-frequency = <0>; // 33 MHz, from uboot
39 bus-frequency = <0>; // 166 MHz
40 clock-frequency = <0>; // 825 MHz, from uboot
47 reg = <0x0 0x8000000>; // 128M at 0x0
55 ranges = <0x0 0xe0000000 0x100000>;
[all …]
Dmpc8560ads.dts30 #size-cells = <0>;
32 PowerPC,8560@0 {
34 reg = <0x0>;
37 d-cache-size = <0x8000>; // L1, 32K
38 i-cache-size = <0x8000>; // L1, 32K
47 reg = <0x0 0x10000000>;
55 ranges = <0x0 0xe0000000 0x100000>;
58 ecm-law@0 {
60 reg = <0x0 0x1000>;
66 reg = <0x1000 0x1000>;
[all …]
/kernel/linux/linux-6.6/drivers/accel/habanalabs/include/gaudi2/asic_reg/
Dgaudi2_blocks_linux_driver.h16 #define mmDCORE0_TPC0_ROM_TABLE_BASE 0x0ull
17 #define DCORE0_TPC0_ROM_TABLE_MAX_OFFSET 0x1000
18 #define DCORE0_TPC0_ROM_TABLE_SECTION 0x1000
19 #define mmDCORE0_TPC0_EML_SPMU_BASE 0x1000ull
20 #define DCORE0_TPC0_EML_SPMU_MAX_OFFSET 0x1000
21 #define DCORE0_TPC0_EML_SPMU_SECTION 0x1000
22 #define mmDCORE0_TPC0_EML_ETF_BASE 0x2000ull
23 #define DCORE0_TPC0_EML_ETF_MAX_OFFSET 0x1000
24 #define DCORE0_TPC0_EML_ETF_SECTION 0x1000
25 #define mmDCORE0_TPC0_EML_STM_BASE 0x3000ull
[all …]
/kernel/linux/linux-6.6/arch/arm/mach-omap2/
Dprcm43xx.h15 #define AM43XX_PRM_OCP_SOCKET_INST 0x0000
16 #define AM43XX_PRM_MPU_INST 0x0300
17 #define AM43XX_PRM_GFX_INST 0x0400
18 #define AM43XX_PRM_RTC_INST 0x0500
19 #define AM43XX_PRM_TAMPER_INST 0x0600
20 #define AM43XX_PRM_CEFUSE_INST 0x0700
21 #define AM43XX_PRM_PER_INST 0x0800
22 #define AM43XX_PRM_WKUP_INST 0x2000
23 #define AM43XX_PRM_DEVICE_INST 0x4000
26 #define AM43XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
[all …]
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/power/supply/
Dqcom,coincell-charger.txt40 pm8941@0 {
43 reg = <0x2800>;
/kernel/linux/linux-5.10/arch/mips/pci/
Dpci-generic.c14 * addresses to be allocated in the 0x000-0x0ff region
15 * modulo 0x400.
18 * the low 10 bits of the IO address. The 0x00-0xff region
20 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
21 * but we want to try to avoid allocating at 0x2900-0x2bff
22 * which might have be mirrored at 0x0100-0x03ff..
31 if (res->flags & IORESOURCE_IO && start & 0x300) in pcibios_align_resource()
32 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
/kernel/linux/linux-5.10/arch/arm/boot/dts/
Dstm32mp153.dtsi28 reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
35 bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
41 reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
48 bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
/kernel/linux/linux-6.6/arch/arm/boot/dts/st/
Dstm32mp153.dtsi35 reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
42 bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
48 reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
55 bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
Dstm32mp133.dtsi13 reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
20 bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
26 reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
33 bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
39 reg = <0x48003000 0x400>;
46 #size-cells = <0>;
49 adc1: adc@0 {
53 #size-cells = <0>;
54 reg = <0x0>;
56 interrupts = <0>;
[all …]
/kernel/linux/linux-6.6/Documentation/devicetree/bindings/power/supply/
Dqcom,pm8941-coincell.yaml59 #size-cells = <0>;
63 reg = <0x2800>;
/kernel/linux/linux-6.6/arch/mips/pci/
Dpci-generic.c14 * addresses to be allocated in the 0x000-0x0ff region
15 * modulo 0x400.
18 * the low 10 bits of the IO address. The 0x00-0xff region
20 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
21 * but we want to try to avoid allocating at 0x2900-0x2bff
22 * which might have be mirrored at 0x0100-0x03ff..
31 if (res->flags & IORESOURCE_IO && start & 0x300) in pcibios_align_resource()
32 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
55 if (res->start != 0) { in pci_remap_iospace()
62 return 0; in pci_remap_iospace()
/kernel/linux/linux-5.10/arch/powerpc/boot/dts/
Dmpc5125twr.dts30 #size-cells = <0>;
32 PowerPC,5125@0 {
34 reg = <0>;
35 d-cache-line-size = <0x20>; // 32 bytes
36 i-cache-line-size = <0x20>; // 32 bytes
37 d-cache-size = <0x8000>; // L1, 32K
38 i-cache-size = <0x8000>; // L1, 32K
47 reg = <0x00000000 0x10000000>; // 256MB at 0
52 reg = <0x30000000 0x08000>; // 32K at 0x30000000
57 #size-cells = <0>;
[all …]
/kernel/linux/linux-6.6/arch/powerpc/boot/dts/
Dmpc5125twr.dts30 #size-cells = <0>;
32 PowerPC,5125@0 {
34 reg = <0>;
35 d-cache-line-size = <0x20>; // 32 bytes
36 i-cache-line-size = <0x20>; // 32 bytes
37 d-cache-size = <0x8000>; // L1, 32K
38 i-cache-size = <0x8000>; // L1, 32K
47 reg = <0x00000000 0x10000000>; // 256MB at 0
52 reg = <0x30000000 0x08000>; // 32K at 0x30000000
57 #size-cells = <0>;
[all …]
/kernel/linux/linux-5.10/arch/xtensa/kernel/
Dpci.c30 * addresses to be allocated in the 0x000-0x0ff region
31 * modulo 0x400.
34 * the low 10 bits of the IO address. The 0x00-0xff region
36 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
37 * but we want to try to avoid allocating at 0x2900-0x2bff
38 * which might have be mirrored at 0x0100-0x03ff..
48 if (size > 0x100) { in pcibios_align_resource()
54 if (start & 0x300) in pcibios_align_resource()
55 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
79 if (pci_ctrl == 0) in pci_iobar_pfn()
[all …]
/kernel/linux/linux-6.6/arch/xtensa/kernel/
Dpci.c30 * addresses to be allocated in the 0x000-0x0ff region
31 * modulo 0x400.
34 * the low 10 bits of the IO address. The 0x00-0xff region
36 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
37 * but we want to try to avoid allocating at 0x2900-0x2bff
38 * which might have be mirrored at 0x0100-0x03ff..
48 if (size > 0x100) { in pcibios_align_resource()
54 if (start & 0x300) in pcibios_align_resource()
55 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
86 return 0; in pci_iobar_pfn()
/kernel/linux/linux-5.10/arch/m68k/kernel/
Dpcibios.c19 * addresses to be allocated in the 0x000-0x0ff region
20 * modulo 0x400.
23 * the low 10 bits of the IO address. The 0x00-0xff region
25 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
26 * but we want to try to avoid allocating at 0x2900-0x2bff
27 * which might be mirrored at 0x0100-0x03ff..
34 if ((res->flags & IORESOURCE_IO) && (start & 0x300)) in pcibios_align_resource()
35 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
54 for (idx = 0; idx < 6; idx++) { in pcibios_enable_device()
79 pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n", in pcibios_enable_device()
[all …]
/kernel/linux/linux-6.6/arch/m68k/kernel/
Dpcibios.c19 * addresses to be allocated in the 0x000-0x0ff region
20 * modulo 0x400.
23 * the low 10 bits of the IO address. The 0x00-0xff region
25 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
26 * but we want to try to avoid allocating at 0x2900-0x2bff
27 * which might be mirrored at 0x0100-0x03ff..
34 if ((res->flags & IORESOURCE_IO) && (start & 0x300)) in pcibios_align_resource()
35 start = (start + 0x3ff) & ~0x3ff; in pcibios_align_resource()
54 for (idx = 0; idx < 6; idx++) { in pcibios_enable_device()
79 pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n", in pcibios_enable_device()
[all …]
/kernel/linux/linux-6.6/sound/soc/amd/acp/
Dchip_offset_byte.h14 #define ACPAXI2AXI_ATU_CTRL 0xC40
15 #define ACPAXI2AXI_ATU_PAGE_SIZE_GRP_5 0xC20
16 #define ACPAXI2AXI_ATU_BASE_ADDR_GRP_5 0xC24
18 #define ACP_PGFSM_CONTROL 0x141C
19 #define ACP_PGFSM_STATUS 0x1420
20 #define ACP_SOFT_RESET 0x1000
21 #define ACP_CONTROL 0x1004
24 (adata->acp_base + adata->rsrc->irq_reg_offset + offset + (ctrl * 0x04))
26 #define ACP_EXTERNAL_INTR_ENB(adata) ACP_EXTERNAL_INTR_REG_ADDR(adata, 0x0, 0x0)
27 #define ACP_EXTERNAL_INTR_CNTL(adata, ctrl) ACP_EXTERNAL_INTR_REG_ADDR(adata, 0x4, ctrl)
[all …]
/kernel/linux/linux-5.10/drivers/net/wireless/broadcom/brcm80211/include/
Dbrcmu_d11.h20 /* bit 0~7 channel number
21 * for 80+80 channels: bit 0~3 low channel id, bit 4~7 high channel id
23 #define BRCMU_CHSPEC_CH_MASK 0x00ff
24 #define BRCMU_CHSPEC_CH_SHIFT 0
25 #define BRCMU_CHSPEC_CHL_MASK 0x000f
26 #define BRCMU_CHSPEC_CHL_SHIFT 0
27 #define BRCMU_CHSPEC_CHH_MASK 0x00f0
36 #define BRCMU_CHSPEC_D11N_SB_MASK 0x0300
38 #define BRCMU_CHSPEC_D11N_SB_L 0x0100 /* control lower */
39 #define BRCMU_CHSPEC_D11N_SB_U 0x0200 /* control upper */
[all …]
/kernel/linux/linux-6.6/drivers/net/wireless/broadcom/brcm80211/include/
Dbrcmu_d11.h20 /* bit 0~7 channel number
21 * for 80+80 channels: bit 0~3 low channel id, bit 4~7 high channel id
23 #define BRCMU_CHSPEC_CH_MASK 0x00ff
24 #define BRCMU_CHSPEC_CH_SHIFT 0
25 #define BRCMU_CHSPEC_CHL_MASK 0x000f
26 #define BRCMU_CHSPEC_CHL_SHIFT 0
27 #define BRCMU_CHSPEC_CHH_MASK 0x00f0
36 #define BRCMU_CHSPEC_D11N_SB_MASK 0x0300
38 #define BRCMU_CHSPEC_D11N_SB_L 0x0100 /* control lower */
39 #define BRCMU_CHSPEC_D11N_SB_U 0x0200 /* control upper */
[all …]
/kernel/linux/linux-5.10/arch/arm64/boot/dts/qcom/
Dpm8998.dtsi35 pm8998_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
44 reg = <0x800>;
45 mode-bootloader = <0x2>;
46 mode-recovery = <0x1>;
50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
59 reg = <0x2400>;
60 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
63 #thermal-sensor-cells = <0>;
[all …]
/kernel/linux/linux-5.10/arch/arm/mach-omap2/
Dprcm43xx.h18 #define AM43XX_PRM_OCP_SOCKET_INST 0x0000
19 #define AM43XX_PRM_MPU_INST 0x0300
20 #define AM43XX_PRM_GFX_INST 0x0400
21 #define AM43XX_PRM_RTC_INST 0x0500
22 #define AM43XX_PRM_TAMPER_INST 0x0600
23 #define AM43XX_PRM_CEFUSE_INST 0x0700
24 #define AM43XX_PRM_PER_INST 0x0800
25 #define AM43XX_PRM_WKUP_INST 0x2000
26 #define AM43XX_PRM_DEVICE_INST 0x4000
29 #define AM43XX_PRM_IRQSTATUS_MPU_OFFSET 0x0004
[all …]
/kernel/linux/linux-6.6/arch/arm64/boot/dts/qcom/
Dpm8998.dtsi35 pm8998_lsid0: pmic@0 {
37 reg = <0x0 SPMI_USID>;
39 #size-cells = <0>;
44 reg = <0x800>;
45 mode-bootloader = <0x2>;
46 mode-recovery = <0x1>;
50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
58 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
67 reg = <0x2400>;
68 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
[all …]
/kernel/linux/linux-5.10/drivers/tty/serial/8250/
D8250_acorn.c54 info->vaddr = ecardm_iomap(ec, type->type, 0, 0); in serial_card_probe()
62 memset(&uart, 0, sizeof(struct uart_8250_port)); in serial_card_probe()
70 for (i = 0; i < info->num_ports; i++) { in serial_card_probe()
77 return 0; in serial_card_probe()
87 for (i = 0; i < info->num_ports; i++) in serial_card_remove()
88 if (info->ports[i] > 0) in serial_card_remove()
98 .offset = { 0x2800, 0x2400, 0x2000 },
105 .offset = { 0x2000, 0x2020 },
111 { 0xffff, 0xffff }

12345678910>>...12