Home
last modified time | relevance | path

Searched +full:0 +full:x2c000000 (Results 1 – 25 of 51) sorted by relevance

123

/kernel/linux/linux-6.6/arch/arm64/boot/dts/freescale/
Dimx8-ss-vpu.dtsi10 ranges = <0x2c000000 0x0 0x2c000000 0x2000000>;
11 reg = <0 0x2c000000 0 0x1000000>;
17 reg = <0x2d000000 0x20000>;
26 reg = <0x2d020000 0x20000>;
35 reg = <0x2d040000 0x20000>;
43 reg = <0x2d080000 0x10000>;
47 mboxes = <&mu_m0 0 0>,
48 <&mu_m0 0 1>,
49 <&mu_m0 1 0>;
54 reg = <0x2d090000 0x10000>;
[all …]
/kernel/linux/linux-6.6/Documentation/devicetree/bindings/media/
Damphion,vpu.yaml20 pattern: "^vpu@[0-9a-f]+$"
43 "^mailbox@[0-9a-f]+$":
50 "^vpu-core@[0-9a-f]+$":
116 ranges = <0x2c000000 0x2c000000 0x2000000>;
117 reg = <0x2c000000 0x1000000>;
124 reg = <0x2d000000 0x20000>;
125 interrupts = <0 472 4>;
132 reg = <0x2d020000 0x20000>;
133 interrupts = <0 473 4>;
140 reg = <0x2d040000 0x20000>;
[all …]
/kernel/linux/linux-6.6/drivers/gpu/drm/amd/include/asic_reg/nbio/
Dnbio_2_3_default.h26 #define mmBIF_BX_PF_MM_INDEX_DEFAULT 0x00000000
27 #define mmBIF_BX_PF_MM_DATA_DEFAULT 0x00000000
28 #define mmBIF_BX_PF_MM_INDEX_HI_DEFAULT 0x00000000
32 #define mmSYSHUB_INDEX_OVLP_DEFAULT 0x00000000
33 #define mmSYSHUB_DATA_OVLP_DEFAULT 0x00000000
34 #define mmPCIE_INDEX_DEFAULT 0x00000000
35 #define mmPCIE_DATA_DEFAULT 0x00000000
36 #define mmPCIE_INDEX2_DEFAULT 0x00000000
37 #define mmPCIE_DATA2_DEFAULT 0x00000000
38 #define mmSBIOS_SCRATCH_0_DEFAULT 0x00000000
[all …]
/kernel/linux/linux-5.10/drivers/gpu/drm/amd/include/asic_reg/nbio/
Dnbio_2_3_default.h26 #define mmBIF_BX_PF_MM_INDEX_DEFAULT 0x00000000
27 #define mmBIF_BX_PF_MM_DATA_DEFAULT 0x00000000
28 #define mmBIF_BX_PF_MM_INDEX_HI_DEFAULT 0x00000000
32 #define mmSYSHUB_INDEX_OVLP_DEFAULT 0x00000000
33 #define mmSYSHUB_DATA_OVLP_DEFAULT 0x00000000
34 #define mmPCIE_INDEX_DEFAULT 0x00000000
35 #define mmPCIE_DATA_DEFAULT 0x00000000
36 #define mmPCIE_INDEX2_DEFAULT 0x00000000
37 #define mmPCIE_DATA2_DEFAULT 0x00000000
38 #define mmSBIOS_SCRATCH_0_DEFAULT 0x00000000
[all …]
/kernel/linux/linux-6.6/arch/arm64/boot/dts/arm/
Dfoundation-v8-gicv3.dtsi13 ranges = <0x0 0x0 0x2f000000 0x100000>;
15 reg = <0x0 0x2f000000 0x0 0x10000>,
16 <0x0 0x2f100000 0x0 0x200000>,
17 <0x0 0x2c000000 0x0 0x2000>,
18 <0x0 0x2c010000 0x0 0x2000>,
19 <0x0 0x2c02f000 0x0 0x2000>;
26 reg = <0x20000 0x20000>;
/kernel/linux/linux-5.10/arch/arm64/boot/dts/arm/
Dfoundation-v8-gicv3.dtsi13 ranges = <0x0 0x0 0x2f000000 0x100000>;
15 reg = <0x0 0x2f000000 0x0 0x10000>,
16 <0x0 0x2f100000 0x0 0x200000>,
17 <0x0 0x2c000000 0x0 0x2000>,
18 <0x0 0x2c010000 0x0 0x2000>,
19 <0x0 0x2c02f000 0x0 0x2000>;
26 reg = <0x20000 0x20000>;
/kernel/linux/linux-5.10/arch/arm/boot/dts/
Domap3-sbc-t3730.dts21 pinctrl-0 = <&sb_t35_usb_hub_pins>;
25 OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
31 ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
32 <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
33 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
Domap3-sbc-t3530.dts21 pinctrl-0 = <&sb_t35_usb_hub_pins>;
25 OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
31 ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
32 <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
33 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
37 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
Domap3-cm-t3x30.dtsi10 cpu@0 {
27 OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
28 OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
34 OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
35 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
36 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
37 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
38 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
39 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
40 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
[all …]
Domap-zoom-common.dtsi9 ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
10 <7 0 0x2c000000 0x01000000>;
17 uart@3,0 {
19 reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
27 gpmc,mux-add-data = <0>;
48 gpmc,wait-monitoring-ns = <0>;
49 gpmc,clk-activation-ns = <0>;
55 reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
66 reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
77 reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
[all …]
Domap4-duovero-parlor.dts31 #size-cells = <0>;
59 pinctrl-0 = <
67 OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
73 OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */
79 OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
80 OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
86 OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
87 OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
93 OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */
94 OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */
[all …]
Domap3-evm-processor-common.dtsi8 reg = <0x80000000 0x10000000>; /* 256 MB */
13 pinctrl-0 = <&wl12xx_gpio>;
21 pinctrl-0 = <
29 pinctrl-0 = <&ehci_phy_pins>;
34 pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
38 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
39 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
40 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
41 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
43 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
[all …]
Dlogicpd-som-lv-baseboard.dtsi7 pinctrl-0 = <&gpio_key_pins>;
26 pinctrl-0 = <&led_pins &led_pins_wkup>;
55 pinctrl-0 = <&mcbsp2_pins>;
64 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
65 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
66 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */
70 pinctrl-0 = <&lan9221_pins>;
73 reg = <1 0 0xff>;
86 pinctrl-0 = <&dss_dpi_pins1>;
111 pinctrl-0 = <&lcd_enable_pin>;
[all …]
Domap3-igep0020-common.dtsi16 pinctrl-0 = <&leds_pins>;
58 #phy-cells = <0>;
67 #size-cells = <0>;
69 port@0 {
70 reg = <0>;
105 pinctrl-0 = <
112 OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
118 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
119 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
120 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
[all …]
/kernel/linux/linux-6.6/arch/arm/boot/dts/ti/omap/
Domap3-sbc-t3730.dts21 pinctrl-0 = <&sb_t35_usb_hub_pins>;
25 OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
31 ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
32 <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
33 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
Domap3-sbc-t3530.dts21 pinctrl-0 = <&sb_t35_usb_hub_pins>;
25 OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
31 ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
32 <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
33 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
37 cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
Domap3-cm-t3x30.dtsi10 cpu@0 {
27 OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
28 OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
34 OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
35 OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
36 OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
37 OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
38 OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data0.hsusb2_data0 */
39 OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
40 OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
[all …]
Domap-zoom-common.dtsi9 ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
10 <7 0 0x2c000000 0x01000000>;
17 serial@3,0 {
19 reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
27 gpmc,mux-add-data = <0>;
48 gpmc,wait-monitoring-ns = <0>;
49 gpmc,clk-activation-ns = <0>;
55 reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
66 reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
77 reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
[all …]
Domap4-duovero-parlor.dts31 #size-cells = <0>;
59 pinctrl-0 = <
67 OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */
73 OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */
79 OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
80 OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
86 OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
87 OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
93 OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */
94 OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */
[all …]
Domap3-evm-processor-common.dtsi8 reg = <0x80000000 0x10000000>; /* 256 MB */
13 pinctrl-0 = <&wl12xx_gpio>;
21 pinctrl-0 = <
29 pinctrl-0 = <&ehci_phy_pins>;
34 pinctrl-0 = <&on_board_gpio_61 &hsusb2_pins>;
38 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
39 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
40 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
41 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
43 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
[all …]
Dlogicpd-som-lv-baseboard.dtsi7 pinctrl-0 = <&gpio_key_pins>;
26 pinctrl-0 = <&led_pins &led_pins_wkup>;
55 pinctrl-0 = <&mcbsp2_pins>;
64 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
65 1 0 0x2c000000 0x1000000 /* CS1: 16MB for LAN9221 */
66 2 0 0x10000000 0x2000000>; /* CS2: 32MB for NOR */
70 pinctrl-0 = <&lan9221_pins>;
73 reg = <1 0 0xff>;
86 pinctrl-0 = <&dss_dpi_pins1>;
111 pinctrl-0 = <&lcd_enable_pin>;
[all …]
Domap3-igep0020-common.dtsi16 pinctrl-0 = <&leds_pins>;
58 #phy-cells = <0>;
67 #size-cells = <0>;
69 port@0 {
70 reg = <0>;
105 pinctrl-0 = <
112 OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
118 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
119 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
120 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
[all …]
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/
Dgpmc-eth.txt41 Note that base address will be typically 0 as this
53 reg = <0x6e000000 0x1000>;
60 ranges = <5 0 0x2c000000 0x1000000>;
62 ethernet@5,0 {
64 reg = <5 0 0xff>;
68 gpmc,cs-on-ns = <0>;
/kernel/linux/linux-6.6/arch/arm/boot/dts/arm/
Dvexpress-v2p-ca5s.dts16 arm,hbi = <0x225>;
17 arm,vexpress,site = <0xf>;
36 #size-cells = <0>;
38 cpu@0 {
41 reg = <0>;
55 reg = <0x80000000 0x40000000>;
63 /* Chipselect 2 is physically at 0x18000000 */
67 reg = <0x18000000 0x00800000>;
74 reg = <0x2a110000 0x1000>;
75 interrupts = <0 85 4>;
[all …]
/kernel/linux/linux-5.10/Documentation/devicetree/bindings/interrupt-controller/
Darm,gic-v3.yaml33 enum: [ 0, 1, 2 ]
46 The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
51 SPI interrupts are in the range [0-987]. PPI interrupts are in the
52 range [0-15]. Extented SPI interrupts are in the range [0-1023].
53 Extended PPI interrupts are in the range [0-127].
56 bits[3:0] trigger type and level flags.
68 of 0 if present.
95 multipleOf: 0x10000
96 exclusiveMinimum: 0
136 "^interrupt-partition-[0-9]+$":
[all …]

123