| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,spmi-iadc.txt | 6 (channel 0). When using an external resistor it is to be described by 36 reg = <0x3600 0x100>; 37 interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; 44 io-channels = <&pmic_iadc 0>;
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,spmi-iadc.yaml | 16 (channel 0). When using an external resistor it is to be described by 55 #size-cells = <0>; 58 reg = <0x3600>; 59 interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
|
| /kernel/linux/linux-5.10/drivers/staging/media/atomisp/i2c/ |
| D | ov2722.h | 38 #define I2C_MSG_LENGTH 0x2 50 * bits 31-16: numerator, bits 15-0: denominator 52 #define OV2722_FOCAL_LENGTH_DEFAULT 0x1160064 56 * bits 31-16: numerator, bits 15-0: denominator 58 #define OV2722_F_NUMBER_DEFAULT 0x1a000a 65 * bits 7-0: min f-number denominator 67 #define OV2722_F_NUMBER_RANGE 0x1a0a1a0a 68 #define OV2720_ID 0x2720 69 #define OV2722_ID 0x2722 71 #define OV2722_FINE_INTG_TIME_MIN 0 [all …]
|
| /kernel/linux/linux-6.6/drivers/staging/media/atomisp/i2c/ |
| D | ov2722.h | 38 #define I2C_MSG_LENGTH 0x2 47 * bits 31-16: numerator, bits 15-0: denominator 49 #define OV2722_FOCAL_LENGTH_DEFAULT 0x1160064 53 * bits 31-16: numerator, bits 15-0: denominator 55 #define OV2722_F_NUMBER_DEFAULT 0x1a000a 62 * bits 7-0: min f-number denominator 64 #define OV2722_F_NUMBER_RANGE 0x1a0a1a0a 65 #define OV2720_ID 0x2720 66 #define OV2722_ID 0x2722 68 #define OV2722_FINE_INTG_TIME_MIN 0 [all …]
|
| /kernel/linux/linux-6.6/sound/soc/codecs/ |
| D | rt700.h | 30 #define RT700_AUDIO_FUNCTION_GROUP 0x01 31 #define RT700_DAC_OUT1 0x02 32 #define RT700_DAC_OUT2 0x03 33 #define RT700_ADC_IN1 0x09 34 #define RT700_ADC_IN2 0x08 35 #define RT700_DMIC1 0x12 36 #define RT700_DMIC2 0x13 37 #define RT700_SPK_OUT 0x14 38 #define RT700_MIC2 0x19 39 #define RT700_LINE1 0x1a [all …]
|
| D | rt715.h | 30 #define RT715_AUDIO_FUNCTION_GROUP 0x01 31 #define RT715_MIC_ADC 0x07 32 #define RT715_LINE_ADC 0x08 33 #define RT715_MIX_ADC 0x09 34 #define RT715_DMIC1 0x12 35 #define RT715_DMIC2 0x13 36 #define RT715_MIC1 0x18 37 #define RT715_MIC2 0x19 38 #define RT715_LINE1 0x1a 39 #define RT715_LINE2 0x1b [all …]
|
| D | rt711.h | 32 #define RT711_AUDIO_FUNCTION_GROUP 0x01 33 #define RT711_DAC_OUT2 0x03 34 #define RT711_ADC_IN1 0x09 35 #define RT711_ADC_IN2 0x08 36 #define RT711_DMIC1 0x12 37 #define RT711_DMIC2 0x13 38 #define RT711_MIC2 0x19 39 #define RT711_LINE1 0x1a 40 #define RT711_LINE2 0x1b 41 #define RT711_BEEP 0x1d [all …]
|
| /kernel/linux/linux-5.10/sound/soc/codecs/ |
| D | rt700.h | 33 #define RT700_AUDIO_FUNCTION_GROUP 0x01 34 #define RT700_DAC_OUT1 0x02 35 #define RT700_DAC_OUT2 0x03 36 #define RT700_ADC_IN1 0x09 37 #define RT700_ADC_IN2 0x08 38 #define RT700_DMIC1 0x12 39 #define RT700_DMIC2 0x13 40 #define RT700_SPK_OUT 0x14 41 #define RT700_MIC2 0x19 42 #define RT700_LINE1 0x1a [all …]
|
| D | rt715.h | 32 #define RT715_AUDIO_FUNCTION_GROUP 0x01 33 #define RT715_MIC_ADC 0x07 34 #define RT715_LINE_ADC 0x08 35 #define RT715_MIX_ADC 0x09 36 #define RT715_DMIC1 0x12 37 #define RT715_DMIC2 0x13 38 #define RT715_MIC1 0x18 39 #define RT715_MIC2 0x19 40 #define RT715_LINE1 0x1a 41 #define RT715_LINE2 0x1b [all …]
|
| D | rt711.h | 35 #define RT711_AUDIO_FUNCTION_GROUP 0x01 36 #define RT711_DAC_OUT2 0x03 37 #define RT711_ADC_IN1 0x09 38 #define RT711_ADC_IN2 0x08 39 #define RT711_DMIC1 0x12 40 #define RT711_DMIC2 0x13 41 #define RT711_MIC2 0x19 42 #define RT711_LINE1 0x1a 43 #define RT711_LINE2 0x1b 44 #define RT711_BEEP 0x1d [all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/ |
| D | phy-mtk-xsphy.txt | 59 u2 port0 0x0000 MISC 60 0x0100 FMREG 61 0x0300 U2PHY_COM 62 u2 port1 0x1000 MISC 63 0x1100 FMREG 64 0x1300 U2PHY_COM 65 u2 port2 0x2000 MISC 67 u31 common 0x3000 DIG_GLB 68 0x3100 PHYA_GLB 69 u31 port0 0x3400 DIG_LN_TOP [all …]
|
| /kernel/linux/linux-6.6/lib/ |
| D | crc16.c | 10 /** CRC table for the CRC-16. The poly is 0x8005 (x^16 + x^15 + x^2 + 1) */ 12 0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241, 13 0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440, 14 0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40, 15 0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841, 16 0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40, 17 0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41, 18 0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641, 19 0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040, 20 0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240, [all …]
|
| /kernel/linux/linux-5.10/lib/ |
| D | crc16.c | 10 /** CRC table for the CRC-16. The poly is 0x8005 (x^16 + x^15 + x^2 + 1) */ 12 0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241, 13 0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440, 14 0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40, 15 0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841, 16 0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40, 17 0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41, 18 0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641, 19 0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040, 20 0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240, [all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/qcom/ |
| D | pm8226.dtsi | 11 polling-delay = <0>; 38 pm8226_0: pm8226@0 { 40 reg = <0x0 SPMI_USID>; 42 #size-cells = <0>; 46 reg = <0x800>; 50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 58 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; 67 reg = <0x1000>; 68 interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, 69 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, [all …]
|
| D | pm8941.dtsi | 11 polling-delay = <0>; 39 pm8941_0: pm8941@0 { 41 reg = <0x0 SPMI_USID>; 43 #size-cells = <0>; 47 reg = <0x6000>, 48 <0x6100>; 50 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 55 reg = <0x800>; 59 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 66 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; [all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/phy/ |
| D | mediatek,xsphy.yaml | 20 u2 port0 0x0000 MISC 21 0x0100 FMREG 22 0x0300 U2PHY_COM 23 u2 port1 0x1000 MISC 24 0x1100 FMREG 25 0x1300 U2PHY_COM 26 u2 port2 0x2000 MISC 28 u31 common 0x3000 DIG_GLB 29 0x3100 PHYA_GLB 30 u31 port0 0x3400 DIG_LN_TOP [all …]
|
| /kernel/linux/linux-5.10/drivers/mfd/ |
| D | si476x-prop.c | 25 for (i = 0; i < size; i++) in si476x_core_element_is_in_array() 38 for (i = 0; i < size; i++) in si476x_core_element_is_in_range() 49 0x0000, in si476x_core_is_valid_property_a10() 50 0x0500, 0x0501, in si476x_core_is_valid_property_a10() 51 0x0600, in si476x_core_is_valid_property_a10() 52 0x0709, 0x070C, 0x070D, 0x70E, 0x710, in si476x_core_is_valid_property_a10() 53 0x0718, in si476x_core_is_valid_property_a10() 54 0x1207, 0x1208, in si476x_core_is_valid_property_a10() 55 0x2007, in si476x_core_is_valid_property_a10() 56 0x2300, in si476x_core_is_valid_property_a10() [all …]
|
| /kernel/linux/linux-6.6/drivers/mfd/ |
| D | si476x-prop.c | 25 for (i = 0; i < size; i++) in si476x_core_element_is_in_array() 38 for (i = 0; i < size; i++) in si476x_core_element_is_in_range() 49 0x0000, in si476x_core_is_valid_property_a10() 50 0x0500, 0x0501, in si476x_core_is_valid_property_a10() 51 0x0600, in si476x_core_is_valid_property_a10() 52 0x0709, 0x070C, 0x070D, 0x70E, 0x710, in si476x_core_is_valid_property_a10() 53 0x0718, in si476x_core_is_valid_property_a10() 54 0x1207, 0x1208, in si476x_core_is_valid_property_a10() 55 0x2007, in si476x_core_is_valid_property_a10() 56 0x2300, in si476x_core_is_valid_property_a10() [all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | qcom-pm8941.dtsi | 8 pm8941_0: pm8941@0 { 10 reg = <0x0 SPMI_USID>; 12 #size-cells = <0>; 16 reg = <0x6000>, 17 <0x6100>; 19 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 24 reg = <0x800>; 25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 32 reg = <0x900>; 33 interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; [all …]
|
| /kernel/linux/linux-6.6/drivers/media/i2c/ |
| D | ov5647.c | 42 #define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0) 44 #define OV5647_SW_STANDBY 0x0100 45 #define OV5647_SW_RESET 0x0103 46 #define OV5647_REG_CHIPID_H 0x300a 47 #define OV5647_REG_CHIPID_L 0x300b 48 #define OV5640_REG_PAD_OUT 0x300d 49 #define OV5647_REG_EXP_HI 0x3500 50 #define OV5647_REG_EXP_MID 0x3501 51 #define OV5647_REG_EXP_LO 0x3502 52 #define OV5647_REG_AEC_AGC 0x3503 [all …]
|
| D | ov8856.c | 26 #define OV8856_REG_CHIP_ID 0x300a 27 #define OV8856_CHIP_ID 0x00885a 29 #define OV8856_REG_MODE_SELECT 0x0100 30 #define OV8856_MODE_STANDBY 0x00 31 #define OV8856_MODE_STREAMING 0x01 34 #define OV8856_2A_MODULE 0x01 35 #define OV8856_1B_MODULE 0x02 37 /* the OTP read-out buffer is at 0x7000 and 0xf is the offset 40 #define OV8856_MODULE_REVISION 0x700f 41 #define OV8856_OTP_MODE_CTRL 0x3d84 [all …]
|
| D | ov5645.c | 35 #define OV5645_SYSTEM_CTRL0 0x3008 36 #define OV5645_SYSTEM_CTRL0_START 0x02 37 #define OV5645_SYSTEM_CTRL0_STOP 0x42 38 #define OV5645_CHIP_ID_HIGH 0x300a 39 #define OV5645_CHIP_ID_HIGH_BYTE 0x56 40 #define OV5645_CHIP_ID_LOW 0x300b 41 #define OV5645_CHIP_ID_LOW_BYTE 0x45 42 #define OV5645_IO_MIPI_CTRL00 0x300e 43 #define OV5645_PAD_OUTPUT00 0x3019 44 #define OV5645_AWB_MANUAL_CONTROL 0x3406 [all …]
|
| /kernel/linux/linux-6.6/arch/powerpc/boot/dts/fsl/ |
| D | mpc8569si-post.dtsi | 39 interrupts = <19 2 0 0>; 40 sleep = <&pmc 0x08000000>; 43 /* controller at 0xa000 */ 49 bus-range = <0 255>; 51 interrupts = <26 2 0 0>; 52 sleep = <&pmc 0x20000000>; 54 pcie@0 { 55 reg = <0 0 0 0 0>; 60 interrupts = <26 2 0 0>; 61 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
| /kernel/linux/linux-5.10/arch/powerpc/boot/dts/fsl/ |
| D | mpc8569si-post.dtsi | 39 interrupts = <19 2 0 0>; 40 sleep = <&pmc 0x08000000>; 43 /* controller at 0xa000 */ 49 bus-range = <0 255>; 51 interrupts = <26 2 0 0>; 52 sleep = <&pmc 0x20000000>; 54 pcie@0 { 55 reg = <0 0 0 0 0>; 60 interrupts = <26 2 0 0>; 61 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
| /kernel/linux/linux-5.10/drivers/media/i2c/ |
| D | ov5645.c | 37 #define OV5645_SYSTEM_CTRL0 0x3008 38 #define OV5645_SYSTEM_CTRL0_START 0x02 39 #define OV5645_SYSTEM_CTRL0_STOP 0x42 40 #define OV5645_CHIP_ID_HIGH 0x300a 41 #define OV5645_CHIP_ID_HIGH_BYTE 0x56 42 #define OV5645_CHIP_ID_LOW 0x300b 43 #define OV5645_CHIP_ID_LOW_BYTE 0x45 44 #define OV5645_IO_MIPI_CTRL00 0x300e 45 #define OV5645_PAD_OUTPUT00 0x3019 46 #define OV5645_AWB_MANUAL_CONTROL 0x3406 [all …]
|