| /kernel/linux/linux-6.6/arch/arm/boot/dts/nxp/imx/ |
| D | imx53-m53.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 37 pinctrl-0 = <&pinctrl_i2c2>; 43 reg = <0x41>; 44 id = <0>; 45 blocks = <0x5>; 46 interrupts = <6 0x0>; 48 irq-trigger = <0x1>; 54 st,ref-sel = <0>; 66 reg = <0x50>; [all …]
|
| D | imx53-voipac-dmm-668.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 31 gpio = <&gpio3 31 0>; /* PEN */ 38 pinctrl-0 = <&pinctrl_hog>; 44 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 46 MX53_PAD_GPIO_11__GPIO4_1 0x80000000 48 MX53_PAD_GPIO_12__GPIO4_2 0x80000000 54 MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 55 MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 56 MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 [all …]
|
| D | imx53-sk-imx53.dts | 29 reg = <0x70000000 0x20000000>; 53 pinctrl-0 = <&pinctrl_audmux>; 59 pinctrl-0 = <&pinctrl_can1>; 75 pinctrl-0 = <&pinctrl_ecspi1>; 82 pinctrl-0 = <&pinctrl_ecspi2>; 91 pinctrl-0 = <&pinctrl_esdhc1>; 97 pinctrl-0 = <&pinctrl_fec>; 105 #size-cells = <0>; 107 phy0: ethernet-phy@0 { 108 reg = <0>; [all …]
|
| D | imx53-tx53.dtsi | 55 reg = <0x70000000 0>; 69 clock-frequency = <0>; 75 #clock-cells = <0>; 82 pinctrl-0 = <&pinctrl_gpio_key>; 95 pinctrl-0 = <&pinctrl_stk5led>; 124 pinctrl-0 = <&pinctrl_can_xcvr>; 134 pinctrl-0 = <&pinctrl_usbh1_vbus>; 145 pinctrl-0 = <&pinctrl_usbotg_vbus>; 167 pinctrl-0 = <&pinctrl_ssi1>; 173 pinctrl-0 = <&pinctrl_can1>; [all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | imx53-m53.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 21 #size-cells = <0>; 23 reg_3p2v: regulator@0 { 25 reg = <0>; 45 pinctrl-0 = <&pinctrl_i2c2>; 51 reg = <0x41>; 52 id = <0>; 53 blocks = <0x5>; 54 interrupts = <6 0x0>; [all …]
|
| D | imx53-voipac-dmm-668.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 21 #size-cells = <0>; 23 reg_3p3v: regulator@0 { 25 reg = <0>; 38 gpio = <&gpio3 31 0>; /* PEN */ 46 pinctrl-0 = <&pinctrl_hog>; 52 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 54 MX53_PAD_GPIO_11__GPIO4_1 0x80000000 56 MX53_PAD_GPIO_12__GPIO4_2 0x80000000 [all …]
|
| D | imx53-tx53.dtsi | 55 reg = <0x70000000 0>; 69 clock-frequency = <0>; 75 #clock-cells = <0>; 82 pinctrl-0 = <&pinctrl_gpio_key>; 95 pinctrl-0 = <&pinctrl_stk5led>; 124 pinctrl-0 = <&pinctrl_can_xcvr>; 134 pinctrl-0 = <&pinctrl_usbh1_vbus>; 145 pinctrl-0 = <&pinctrl_usbotg_vbus>; 167 pinctrl-0 = <&pinctrl_ssi1>; 173 pinctrl-0 = <&pinctrl_can1>; [all …]
|
| /kernel/linux/linux-6.6/drivers/clk/socfpga/ |
| D | clk-s10.c | 183 { STRATIX10_BOOT_CLK, "boot_clk", boot_mux, ARRAY_SIZE(boot_mux), 0, 184 0x0}, 186 0, 0x74}, 188 0, 0xe4}, 192 { STRATIX10_MAIN_MPU_BASE_CLK, "main_mpu_base_clk", "main_pll", NULL, 1, 0, 0x84}, 193 { STRATIX10_MAIN_NOC_BASE_CLK, "main_noc_base_clk", "main_pll", NULL, 1, 0, 0x88}, 194 { STRATIX10_PERI_MPU_BASE_CLK, "peri_mpu_base_clk", "periph_pll", NULL, 1, 0, 195 0xF4}, 196 { STRATIX10_PERI_NOC_BASE_CLK, "peri_noc_base_clk", "periph_pll", NULL, 1, 0, 197 0xF8}, [all …]
|
| /kernel/linux/linux-5.10/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 101 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 220 "\xF7\x36\x8D\x07\xEE\xD4\x10\x43\xA4\x40\xD6\xB6\xF0\x74\x54\xF5" 253 "\xcc\x5e\xa4\x6c\xc3\x4d\x28\xef\xda\xaf\xec\x14\x92\xfc\xa3\x75" 281 "\x52\x41\xF4\xDA\x7B\xB7\x59\x55\xCA\xD4\x2F\x0F\x3A\xCB\xA4\x0D" 290 "\x90\x09\xCA\xEC\x0C\xDC\xF9\x2C\xD7\xEB\xAE\xA3\xA4\x47\xD7\x33" 308 "\xf7\xa6\x69\x82\x3f\x56\xa4\x7b\xfb\x62\xe0\xae\xb8\xd3\x04\xb3" 350 "\xf7\xa6\x69\x82\x3f\x56\xa4\x7b\xfb\x62\xe0\xae\xb8\xd3\x04\xb3" 426 "\xA4\x65\xC3\xEC\x24\x2D\x26\x97\xEB\x80\x8A\x9D\x03\xBC\x59\x66" 442 "\x51\xF3\xC8\x61\xF5\x77\x22\x48\x10\x87\x4C\xD5\xA4\xD5\xAE\x2D" [all …]
|
| /kernel/linux/linux-6.6/crypto/ |
| D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 204 "\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x12" 235 "\xF7\x36\x8D\x07\xEE\xD4\x10\x43\xA4\x40\xD6\xB6\xF0\x74\x54\xF5" 256 "\x01\x99\xEB\x9F\x44\xAE\xF4\xFD\xA4\x93\xB8\x1A\x9E\x3D\x84\xF6" 264 "\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x15" 268 "\xEB\x07\xDD\xDC\x01\x83\xA4\xD0\xAC\x9B\x54\xB0\x51\xF2\xB1\x3E" 275 "\x1B\x99\xA4\x95\x84\x98\x07\xFE\x39\xF9\x24\x5A\x98\x36\xDA\x3D" 291 "\xcc\x5e\xa4\x6c\xc3\x4d\x28\xef\xda\xaf\xec\x14\x92\xfc\xa3\x75" 319 "\x52\x41\xF4\xDA\x7B\xB7\x59\x55\xCA\xD4\x2F\x0F\x3A\xCB\xA4\x0D" [all …]
|
| /kernel/linux/linux-5.10/drivers/clk/socfpga/ |
| D | clk-s10.c | 184 { STRATIX10_BOOT_CLK, "boot_clk", boot_mux, ARRAY_SIZE(boot_mux), 0, 185 0x0}, 187 0, 0x74}, 189 0, 0xe4}, 193 { STRATIX10_MAIN_MPU_BASE_CLK, "main_mpu_base_clk", "main_pll", NULL, 1, 0, 0x84}, 194 { STRATIX10_MAIN_NOC_BASE_CLK, "main_noc_base_clk", "main_pll", NULL, 1, 0, 0x88}, 195 { STRATIX10_PERI_MPU_BASE_CLK, "peri_mpu_base_clk", "periph_pll", NULL, 1, 0, 196 0xF4}, 197 { STRATIX10_PERI_NOC_BASE_CLK, "peri_noc_base_clk", "periph_pll", NULL, 1, 0, 198 0xF8}, [all …]
|
| /kernel/linux/linux-5.10/drivers/staging/vt6656/ |
| D | rf.c | 36 {0x03, 0xf7, 0x90}, 37 {0x03, 0x33, 0x31}, 38 {0x01, 0xb8, 0x02}, 39 {0x00, 0xff, 0xf3}, 40 {0x00, 0x05, 0xa4}, 41 {0x0f, 0x4d, 0xc5}, 42 {0x08, 0x05, 0xb6}, 43 {0x01, 0x47, 0xc7}, 44 {0x00, 0x06, 0x88}, 45 {0x04, 0x03, 0xb9}, [all …]
|
| /kernel/linux/linux-6.6/drivers/ata/pata_parport/ |
| D | frpw.c | 23 #define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4); 24 #define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) 27 * cont = 0 - access the IDE register file 30 static int cont_map[2] = { 0x08, 0x10 }; 62 case 0: in frpw_read_block_int() 64 for (k = 0; k < count; k++) { in frpw_read_block_int() 74 w2(4); w0(regr + 0xc0); cec4; in frpw_read_block_int() 75 w0(0xff); in frpw_read_block_int() 76 for (k = 0; k < count; k++) { in frpw_read_block_int() 77 w2(0xa4 + ph); in frpw_read_block_int() [all …]
|
| D | friq.c | 33 w2(4); w0(0xff); w0(0xff); w0(0x73); w0(0x73); \ 34 w0(0xc9); w0(0xc9); w0(0x26); \ 35 w0(0x26); w0(x); w0(x); \ 36 } while (0) 38 #define j44(l, h) (((l >> 4) & 0x0f) | (h & 0xf0)) 41 * cont = 0 - access the IDE register file 44 static int cont_map[2] = { 0x08, 0x10 }; 74 case 0: in friq_read_block_int() 76 for (k = 0; k < count; k++) { in friq_read_block_int() 85 CMD(regr + 0xc0); in friq_read_block_int() [all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/panel/ |
| D | panel-samsung-s6e8aa0.c | 34 #define PANELCTL_SS_1_800 (0 << 5) 41 #define PANELCTL_CLK1_000 (0 << 3) 43 #define PANELCTL_CLK2_CON_MASK (7 << 0) 44 #define PANELCTL_CLK2_000 (0 << 0) 45 #define PANELCTL_CLK2_001 (1 << 0) 48 #define PANELCTL_INT1_000 (0 << 3) 50 #define PANELCTL_INT2_CON_MASK (7 << 0) 51 #define PANELCTL_INT2_000 (0 << 0) 52 #define PANELCTL_INT2_001 (1 << 0) 55 #define PANELCTL_BICTL_000 (0 << 3) [all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/panel/ |
| D | panel-samsung-s6e8aa0.c | 34 #define PANELCTL_SS_1_800 (0 << 5) 41 #define PANELCTL_CLK1_000 (0 << 3) 43 #define PANELCTL_CLK2_CON_MASK (7 << 0) 44 #define PANELCTL_CLK2_000 (0 << 0) 45 #define PANELCTL_CLK2_001 (1 << 0) 48 #define PANELCTL_INT1_000 (0 << 3) 50 #define PANELCTL_INT2_CON_MASK (7 << 0) 51 #define PANELCTL_INT2_000 (0 << 0) 52 #define PANELCTL_INT2_001 (1 << 0) 55 #define PANELCTL_BICTL_000 (0 << 3) [all …]
|
| /kernel/linux/linux-5.10/drivers/media/usb/gspca/ |
| D | nw80x.c | 159 * - 3rd byte: data length (=0 for end of sequence) 162 #define I2C0 0xff 165 0x04, 0x05, 0x01, 0x61, 166 0x04, 0x04, 0x01, 0x01, 167 0x04, 0x06, 0x01, 0x04, 168 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 169 0x05, 0x05, 0x01, 0x00, 170 0, 0, 0 173 0x04, 0x06, 0x01, 0xc0, 174 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, [all …]
|
| /kernel/linux/linux-6.6/drivers/media/usb/gspca/ |
| D | nw80x.c | 159 * - 3rd byte: data length (=0 for end of sequence) 162 #define I2C0 0xff 165 0x04, 0x05, 0x01, 0x61, 166 0x04, 0x04, 0x01, 0x01, 167 0x04, 0x06, 0x01, 0x04, 168 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 169 0x05, 0x05, 0x01, 0x00, 170 0, 0, 0 173 0x04, 0x06, 0x01, 0xc0, 174 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, [all …]
|
| /kernel/linux/linux-6.6/drivers/scsi/aic7xxx/ |
| D | aic7xxx_seq.h_shipped | 9 0xb2, 0x00, 0x00, 0x08, 10 0xf7, 0x11, 0x22, 0x08, 11 0x00, 0x65, 0xee, 0x59, 12 0xf7, 0x01, 0x02, 0x08, 13 0xff, 0x6a, 0x24, 0x08, 14 0x40, 0x00, 0x40, 0x68, 15 0x08, 0x1f, 0x3e, 0x10, 16 0x40, 0x00, 0x40, 0x68, 17 0xff, 0x40, 0x3c, 0x60, 18 0x08, 0x1f, 0x3e, 0x10, [all …]
|
| /kernel/linux/linux-5.10/drivers/scsi/aic7xxx/ |
| D | aic7xxx_seq.h_shipped | 9 0xb2, 0x00, 0x00, 0x08, 10 0xf7, 0x11, 0x22, 0x08, 11 0x00, 0x65, 0xee, 0x59, 12 0xf7, 0x01, 0x02, 0x08, 13 0xff, 0x6a, 0x24, 0x08, 14 0x40, 0x00, 0x40, 0x68, 15 0x08, 0x1f, 0x3e, 0x10, 16 0x40, 0x00, 0x40, 0x68, 17 0xff, 0x40, 0x3c, 0x60, 18 0x08, 0x1f, 0x3e, 0x10, [all …]
|
| /kernel/linux/linux-5.10/drivers/block/paride/ |
| D | frpw.c | 38 #define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4); 39 #define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) 41 /* cont = 0 - access the IDE register file 45 static int cont_map[2] = { 0x08, 0x10 }; 80 case 0: w2(4); w0(regr); cec4; in frpw_read_block_int() 81 for (k=0;k<count;k++) { in frpw_read_block_int() 90 w2(4); w0(regr + 0xc0); cec4; in frpw_read_block_int() 91 w0(0xff); in frpw_read_block_int() 92 for (k=0;k<count;k++) { in frpw_read_block_int() 93 w2(0xa4 + ph); in frpw_read_block_int() [all …]
|
| D | friq.c | 40 #define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\ 41 w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x); 43 #define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) 45 /* cont = 0 - access the IDE register file 49 static int cont_map[2] = { 0x08, 0x10 }; 83 case 0: CMD(regr); in friq_read_block_int() 84 for (k=0;k<count;k++) { in friq_read_block_int() 93 CMD(regr+0xc0); in friq_read_block_int() 94 w0(0xff); in friq_read_block_int() 95 for (k=0;k<count;k++) { in friq_read_block_int() [all …]
|
| /kernel/linux/linux-6.6/crypto/asymmetric_keys/ |
| D | selftest.c | 92 "\x7b\x2e\x4b\x46\x57\xb8\x29\x24\xb2\xfd\xee\x2c\x0d\xa4\x83\xfa" 97 "\x31\xbf\x91\x58\x0a\xe1\x25\x3d\x38\xd3\xa4\xf0\x59\x34\x47\x07" 104 "\x6e\x90\x6c\x54\x3a\x82\x25\x41\xcb\x18\x6a\xa4\x22\xa8\xa1\xc4" 147 "\x88\xe0\xa4\xe2\xcd\x73\x2b\x9e\xb2\x05\x7e\x12\xf8\xd0\x66\x41" 152 "\xcb\xa4\xfa\x77\xbb\x50\x24\x0b\x8b\x88\x99\x15\x56\xa9\x1e\x92" 158 "\x95\x3b\xa4\xbc\x29\x2b\x53\x67\x45\x1b\x0d\xbc\x13\xa5\x76\x31" 161 "\x1b\x81\x9f\x18\x45\xa4\xc6\x70\x3e\x0e\xf0\xd3\x7b\x9c\x10\xbe" 199 if (ret < 0) in fips_signature_selftest() 202 for (i = 0; i < ARRAY_SIZE(certs_tests); i++) { in fips_signature_selftest() 213 if (ret < 0) in fips_signature_selftest() [all …]
|
| /kernel/linux/linux-6.6/arch/x86/kernel/cpu/microcode/ |
| D | amd_shas.c | 3 { 0x8001227, { 4 0x99,0xc0,0x9b,0x2b,0xcc,0x9f,0x52,0x1b, 5 0x1a,0x5f,0x1d,0x83,0xa1,0x6c,0xc4,0x46, 6 0xe2,0x6c,0xda,0x73,0xfb,0x2d,0x23,0xa8, 7 0x77,0xdc,0x15,0x31,0x33,0x4a,0x46,0x18, 10 { 0x8001250, { 11 0xc0,0x0b,0x6b,0x19,0xfd,0x5c,0x39,0x60, 12 0xd5,0xc3,0x57,0x46,0x54,0xe4,0xd1,0xaa, 13 0xa8,0xf7,0x1f,0xa8,0x6a,0x60,0x3e,0xe3, 14 0x27,0x39,0x8e,0x53,0x30,0xf8,0x49,0x19, [all …]
|
| /kernel/linux/linux-6.6/fs/nls/ |
| D | nls_cp949.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */ 18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */ 19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */ 20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */ 21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */ 22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */ 23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */ 24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */ 25 0x0000,0xAC02,0xAC03,0xAC05,0xAC06,0xAC0B,0xAC0C,0xAC0D,/* 0x40-0x47 */ 26 0xAC0E,0xAC0F,0xAC18,0xAC1E,0xAC1F,0xAC21,0xAC22,0xAC23,/* 0x48-0x4F */ [all …]
|