| /kernel/linux/linux-6.6/drivers/gpu/drm/etnaviv/ |
| D | cmdstream.xml.h | 7 http://0x04.net/cgit/index.cgi/rules-ng-ng
8 git clone git://0x04.net/rules-ng-ng
42 #define FE_OPCODE_LOAD_STATE 0x00000001
43 #define FE_OPCODE_END 0x00000002
44 #define FE_OPCODE_NOP 0x00000003
45 #define FE_OPCODE_DRAW_2D 0x00000004
46 #define FE_OPCODE_DRAW_PRIMITIVES 0x00000005
47 #define FE_OPCODE_DRAW_INDEXED_PRIMITIVES 0x00000006
48 #define FE_OPCODE_WAIT 0x00000007
49 #define FE_OPCODE_LINK 0x00000008
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/etnaviv/ |
| D | cmdstream.xml.h | 7 http://0x04.net/cgit/index.cgi/rules-ng-ng
8 git clone git://0x04.net/rules-ng-ng
42 #define FE_OPCODE_LOAD_STATE 0x00000001
43 #define FE_OPCODE_END 0x00000002
44 #define FE_OPCODE_NOP 0x00000003
45 #define FE_OPCODE_DRAW_2D 0x00000004
46 #define FE_OPCODE_DRAW_PRIMITIVES 0x00000005
47 #define FE_OPCODE_DRAW_INDEXED_PRIMITIVES 0x00000006
48 #define FE_OPCODE_WAIT 0x00000007
49 #define FE_OPCODE_LINK 0x00000008
[all …]
|
| /kernel/linux/linux-5.10/arch/powerpc/boot/dts/fsl/ |
| D | mpc8536ds_36b.dts | 17 #size-cells = <0>;
19 PowerPC,8536@0 {
21 reg = <0>;
28 reg = <0 0 0 0>; // Filled by U-Boot
32 reg = <0xf 0xffe05000 0 0x1000>;
34 ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
35 0x2 0x0 0xf 0xffa00000 0x00040000
36 0x3 0x0 0xf 0xffdf0000 0x00008000>;
40 ranges = <0x0 0xf 0xffe00000 0x100000>;
44 reg = <0xf 0xffe08000 0 0x1000>;
[all …]
|
| /kernel/linux/linux-6.6/arch/powerpc/boot/dts/fsl/ |
| D | mpc8536ds_36b.dts | 17 #size-cells = <0>;
19 PowerPC,8536@0 {
21 reg = <0>;
28 reg = <0 0 0 0>; // Filled by U-Boot
32 reg = <0xf 0xffe05000 0 0x1000>;
34 ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
35 0x2 0x0 0xf 0xffa00000 0x00040000
36 0x3 0x0 0xf 0xffdf0000 0x00008000>;
40 ranges = <0x0 0xf 0xffe00000 0x100000>;
44 reg = <0xf 0xffe08000 0 0x1000>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/include/debug/ |
| D | sa1100.S | 10 #define UTCR3 0x0c
11 #define UTDR 0x14
12 #define UTSR1 0x20
13 #define UTCR3_TXE 0x00000002 /* Transmit Enable */
14 #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
15 #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
18 mrc p15, 0, \rp, c1, c0
20 moveq \rp, #0x80000000 @ physical base address
21 movne \rp, #0xf8000000 @ virtual address
28 add \rp, \rp, #0x00050000
[all …]
|
| D | vt8500.S | 10 #define DEBUG_LL_PHYS_BASE 0xD8000000
11 #define DEBUG_LL_VIRT_BASE 0xF8000000
12 #define DEBUG_LL_UART_OFFSET 0x00200000
22 strb \rd, [\rx, #0]
26 1001: ldr \rd, [\rx, #0x1c]
27 ands \rd, \rd, #0x2
|
| D | vexpress.S | 10 #define DEBUG_LL_PHYS_BASE 0x10000000
11 #define DEBUG_LL_UART_OFFSET 0x00009000
13 #define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
14 #define DEBUG_LL_UART_OFFSET_RS1 0x00090000
16 #define DEBUG_LL_UART_PHYS_CRX 0xb0090000
18 #define DEBUG_LL_VIRT_BASE 0xf8000000
27 @ should use UART at 0x10009000
29 @ at 0x1c090000
30 mrc p15, 0, \rp, c0, c0, 0
31 movw \rv, #0xc091
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/include/debug/ |
| D | sa1100.S | 10 #define UTCR3 0x0c
11 #define UTDR 0x14
12 #define UTSR1 0x20
13 #define UTCR3_TXE 0x00000002 /* Transmit Enable */
14 #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
15 #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
18 mrc p15, 0, \rp, c1, c0
20 moveq \rp, #0x80000000 @ physical base address
21 movne \rp, #0xf8000000 @ virtual address
28 add \rp, \rp, #0x00050000
[all …]
|
| D | vt8500.S | 10 #define DEBUG_LL_PHYS_BASE 0xD8000000
11 #define DEBUG_LL_VIRT_BASE 0xF8000000
12 #define DEBUG_LL_UART_OFFSET 0x00200000
22 strb \rd, [\rx, #0]
26 1001: ldr \rd, [\rx, #0x1c]
27 ands \rd, \rd, #0x2
|
| D | vexpress.S | 10 #define DEBUG_LL_PHYS_BASE 0x10000000
11 #define DEBUG_LL_UART_OFFSET 0x00009000
13 #define DEBUG_LL_PHYS_BASE_RS1 0x1c000000
14 #define DEBUG_LL_UART_OFFSET_RS1 0x00090000
16 #define DEBUG_LL_UART_PHYS_CRX 0xb0090000
18 #define DEBUG_LL_VIRT_BASE 0xf8000000
27 @ should use UART at 0x10009000
29 @ at 0x1c090000
30 mrc p15, 0, \rp, c0, c0, 0
31 movw \rv, #0xc091
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-omap2/ |
| D | iomap.h | 33 #define OMAP2_L3_IO_OFFSET 0x90000000
36 #define OMAP2_L4_IO_OFFSET 0xb2000000
39 #define OMAP4_L3_IO_OFFSET 0xb4000000
42 #define AM33XX_L4_WK_IO_OFFSET 0xb5000000
45 #define OMAP4_L3_PER_IO_OFFSET 0xb1100000
48 #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
58 #define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
61 #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
65 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
70 /* 0x6e000000 --> 0xfe000000 */
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-omap2/ |
| D | iomap.h | 33 #define OMAP2_L3_IO_OFFSET 0x90000000
36 #define OMAP2_L4_IO_OFFSET 0xb2000000
39 #define OMAP4_L3_IO_OFFSET 0xb4000000
42 #define AM33XX_L4_WK_IO_OFFSET 0xb5000000
45 #define OMAP4_L3_PER_IO_OFFSET 0xb1100000
48 #define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
58 #define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
61 #define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
65 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
70 /* 0x6e000000 --> 0xfe000000 */
[all …]
|
| /kernel/linux/linux-5.10/net/netfilter/ipset/ |
| D | pfxlen.c | 12 E(0x00000000, 0x00000000, 0x00000000, 0x00000000), \
13 E(0x80000000, 0x00000000, 0x00000000, 0x00000000), \
14 E(0xC0000000, 0x00000000, 0x00000000, 0x00000000), \
15 E(0xE0000000, 0x00000000, 0x00000000, 0x00000000), \
16 E(0xF0000000, 0x00000000, 0x00000000, 0x00000000), \
17 E(0xF8000000, 0x00000000, 0x00000000, 0x00000000), \
18 E(0xFC000000, 0x00000000, 0x00000000, 0x00000000), \
19 E(0xFE000000, 0x00000000, 0x00000000, 0x00000000), \
20 E(0xFF000000, 0x00000000, 0x00000000, 0x00000000), \
21 E(0xFF800000, 0x00000000, 0x00000000, 0x00000000), \
[all …]
|
| /kernel/linux/linux-6.6/net/netfilter/ipset/ |
| D | pfxlen.c | 12 E(0x00000000, 0x00000000, 0x00000000, 0x00000000), \
13 E(0x80000000, 0x00000000, 0x00000000, 0x00000000), \
14 E(0xC0000000, 0x00000000, 0x00000000, 0x00000000), \
15 E(0xE0000000, 0x00000000, 0x00000000, 0x00000000), \
16 E(0xF0000000, 0x00000000, 0x00000000, 0x00000000), \
17 E(0xF8000000, 0x00000000, 0x00000000, 0x00000000), \
18 E(0xFC000000, 0x00000000, 0x00000000, 0x00000000), \
19 E(0xFE000000, 0x00000000, 0x00000000, 0x00000000), \
20 E(0xFF000000, 0x00000000, 0x00000000, 0x00000000), \
21 E(0xFF800000, 0x00000000, 0x00000000, 0x00000000), \
[all …]
|
| /kernel/linux/linux-6.6/Documentation/arch/x86/ |
| D | mtrr.rst | 73 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
74 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
78 # echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr
82 # echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr
87 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
88 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
89 reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1
91 This is for video RAM at base address 0xf8000000 and size 4 megabytes. To
96 (--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
107 That's 4 megabytes, which is 0x400000 bytes (in hexadecimal).
[all …]
|
| /kernel/linux/linux-5.10/Documentation/x86/ |
| D | mtrr.rst | 73 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
74 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
78 # echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr
82 # echo "base=0xf8000000 size=0x400000 type=write-combining" >| /proc/mtrr
87 reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1
88 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1
89 reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1
91 This is for video RAM at base address 0xf8000000 and size 4 megabytes. To
96 (--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000
107 That's 4 megabytes, which is 0x400000 bytes (in hexadecimal).
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pci/ |
| D | brcm,stb-pcie.yaml | 144 reg = <0x0 0x7d500000 0x9310>;
152 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
153 interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
154 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
155 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
156 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
160 ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
161 dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
162 <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
164 brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
[all …]
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/amd/amdkfd/ |
| D | cwsr_trap_handler.h | 24 0xbf820001, 0xbf820121,
25 0xb8f4f802, 0x89748674,
26 0xb8f5f803, 0x8675ff75,
27 0x00000400, 0xbf850017,
28 0xc00a1e37, 0x00000000,
29 0xbf8c007f, 0x87777978,
30 0xbf840005, 0x8f728374,
31 0xb972e0c2, 0xbf800002,
32 0xb9740002, 0xbe801d78,
33 0xb8f5f803, 0x8675ff75,
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/arm/ |
| D | axis.txt | 23 reg = <0xf8000000 0x48>;
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/arm/ |
| D | axis.txt | 23 reg = <0xf8000000 0x48>;
|
| /kernel/linux/linux-6.6/sound/isa/gus/ |
| D | gus_volume.c | 24 while (e > 0 && tmp < (1 << e)) in snd_gf1_lvol_to_gvol_raw()
33 if (m > 0) { in snd_gf1_lvol_to_gvol_raw()
43 #if 0
51 return 0;
81 vol_rates[0] :
83 for (i = 0; i < 3; i++) {
95 return (range << 6) | (increment & 0x3f);
98 #endif /* 0 */
105 if (freq16 & 0xf8000000) { in snd_gf1_translate_freq()
106 freq16 = ~0xf8000000; in snd_gf1_translate_freq()
[all …]
|
| /kernel/linux/linux-5.10/sound/isa/gus/ |
| D | gus_volume.c | 24 while (e > 0 && tmp < (1 << e)) in snd_gf1_lvol_to_gvol_raw()
33 if (m > 0) { in snd_gf1_lvol_to_gvol_raw()
43 #if 0
51 return 0;
81 vol_rates[0] :
83 for (i = 0; i < 3; i++) {
95 return (range << 6) | (increment & 0x3f);
98 #endif /* 0 */
105 if (freq16 & 0xf8000000) { in snd_gf1_translate_freq()
106 freq16 = ~0xf8000000; in snd_gf1_translate_freq()
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mfd/ |
| D | hisilicon,hi655x.txt | 19 - #clock-cells: From common clock binding; shall be set to 0
28 reg = <0x0 0xf8000000 0x0 0x1000>;
32 #clock-cells = <0>;
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mfd/ |
| D | hisilicon,hi655x.txt | 19 - #clock-cells: From common clock binding; shall be set to 0
28 reg = <0x0 0xf8000000 0x0 0x1000>;
32 #clock-cells = <0>;
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/clock/ |
| D | artpec6.txt | 30 #clock-cells = <0>;
38 reg = <0xf8000000 0x48>;
|