| /kernel/linux/linux-5.10/arch/x86/kernel/ |
| D | tsc_msr.c | 22 * The frequency numbers in the SDM are e.g. 83.3 MHz, which does not contain a
24 * use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal
25 * is the source clk for a root PLL which outputs 1600 and 100 MHz. It is
31 * clock of 100 MHz plus a quotient which gets us as close to the frequency
33 * For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 =
34 * 83 and 1/3 MHz, which matches exactly what has been measured on actual hw.
80 * 000: 100 * 5 / 6 = 83.3333 MHz
81 * 001: 100 * 1 / 1 = 100.0000 MHz
82 * 010: 100 * 4 / 3 = 133.3333 MHz
83 * 011: 100 * 7 / 6 = 116.6667 MHz
[all …]
|
| /kernel/linux/linux-6.6/arch/x86/kernel/ |
| D | tsc_msr.c | 22 * The frequency numbers in the SDM are e.g. 83.3 MHz, which does not contain a
24 * use a 25 MHz crystal and Cherry Trail uses a 19.2 MHz crystal, the crystal
25 * is the source clk for a root PLL which outputs 1600 and 100 MHz. It is
31 * clock of 100 MHz plus a quotient which gets us as close to the frequency
33 * For the 83.3 MHz example from above this would give us 100 MHz * 5 / 6 =
34 * 83 and 1/3 MHz, which matches exactly what has been measured on actual hw.
80 * 000: 100 * 5 / 6 = 83.3333 MHz
81 * 001: 100 * 1 / 1 = 100.0000 MHz
82 * 010: 100 * 4 / 3 = 133.3333 MHz
83 * 011: 100 * 7 / 6 = 116.6667 MHz
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-omap2/ |
| D | opp2xxx.h | 70 #define R1_CLKSEL_L4 (2 << 5)
78 #define R1_CLKSEL_DSP_IF (2 << 5)
87 #define R2_CLKSEL_L4 (2 << 5)
95 #define R2_CLKSEL_DSP_IF (3 << 5)
104 #define RB_CLKSEL_L4 (1 << 5)
112 #define RB_CLKSEL_DSP_IF (1 << 5)
123 /* 2420-PRCM III 532MHz core */
124 #define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
125 #define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
126 #define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
[all …]
|
| D | opp2430_data.c | 22 * XXX Missing 19.2MHz sys_clk rate sets.
56 {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
64 {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
71 /* PRCM #5a - ratio1 - FAST */
72 {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
79 /* PRCM #5b - ratio1 - FAST */
80 {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
88 {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
96 {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
103 /* PRCM #5a - ratio1 - SLOW */
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-omap2/ |
| D | opp2xxx.h | 70 #define R1_CLKSEL_L4 (2 << 5)
78 #define R1_CLKSEL_DSP_IF (2 << 5)
87 #define R2_CLKSEL_L4 (2 << 5)
95 #define R2_CLKSEL_DSP_IF (3 << 5)
104 #define RB_CLKSEL_L4 (1 << 5)
112 #define RB_CLKSEL_DSP_IF (1 << 5)
123 /* 2420-PRCM III 532MHz core */
124 #define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
125 #define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
126 #define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
[all …]
|
| D | opp2430_data.c | 22 * XXX Missing 19.2MHz sys_clk rate sets.
56 {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
64 {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
71 /* PRCM #5a - ratio1 - FAST */
72 {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
79 /* PRCM #5b - ratio1 - FAST */
80 {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
88 {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
96 {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
103 /* PRCM #5a - ratio1 - SLOW */
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/dvb/ |
| D | fe-bandwidth-t.rst | 30 - .. _BANDWIDTH-1-712-MHZ:
34 - 1.712 MHz
38 - .. _BANDWIDTH-5-MHZ:
42 - 5 MHz
44 - .. row 5
46 - .. _BANDWIDTH-6-MHZ:
50 - 6 MHz
54 - .. _BANDWIDTH-7-MHZ:
58 - 7 MHz
62 - .. _BANDWIDTH-8-MHZ:
[all …]
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/media/dvb/ |
| D | fe-bandwidth-t.rst | 30 - .. _BANDWIDTH-1-712-MHZ:
34 - 1.712 MHz
38 - .. _BANDWIDTH-5-MHZ:
42 - 5 MHz
44 - .. row 5
46 - .. _BANDWIDTH-6-MHZ:
50 - 6 MHz
54 - .. _BANDWIDTH-7-MHZ:
58 - 7 MHz
62 - .. _BANDWIDTH-8-MHZ:
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/wireless/ti/wl12xx/ |
| D | wl12xx.h | 27 #define WL127X_IFTYPE_MR_VER 5
40 #define WL128X_IFTYPE_MR_VER 5
73 WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
74 WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
75 WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
76 WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
77 WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
78 WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
83 WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
84 WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/ti/wl12xx/ |
| D | wl12xx.h | 27 #define WL127X_IFTYPE_MR_VER 5
40 #define WL128X_IFTYPE_MR_VER 5
73 WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */
74 WL12XX_REFCLOCK_26 = 1, /* 26 MHz */
75 WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */
76 WL12XX_REFCLOCK_52 = 3, /* 52 MHz */
77 WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
78 WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
83 WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */
84 WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */
[all …]
|
| /kernel/linux/linux-5.10/drivers/clk/mvebu/ |
| D | dove.c | 25 * SAR0[8:5] : CPU frequency
26 * 5 = 1000 MHz
27 * 6 = 933 MHz
28 * 7 = 933 MHz
29 * 8 = 800 MHz
30 * 9 = 800 MHz
31 * 10 = 800 MHz
32 * 11 = 1067 MHz
33 * 12 = 667 MHz
34 * 13 = 533 MHz
[all …]
|
| D | kirkwood.c | 28 * 4 = 600 MHz
29 * 6 = 800 MHz
30 * 7 = 1000 MHz
31 * 9 = 1200 MHz
32 * 12 = 1500 MHz
33 * 13 = 1600 MHz
34 * 14 = 1800 MHz
35 * 15 = 2000 MHz
41 * 5 = (1/4) * CPU
44 * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282)
[all …]
|
| /kernel/linux/linux-6.6/drivers/clk/mvebu/ |
| D | dove.c | 25 * SAR0[8:5] : CPU frequency
26 * 5 = 1000 MHz
27 * 6 = 933 MHz
28 * 7 = 933 MHz
29 * 8 = 800 MHz
30 * 9 = 800 MHz
31 * 10 = 800 MHz
32 * 11 = 1067 MHz
33 * 12 = 667 MHz
34 * 13 = 533 MHz
[all …]
|
| D | kirkwood.c | 28 * 4 = 600 MHz
29 * 6 = 800 MHz
30 * 7 = 1000 MHz
31 * 9 = 1200 MHz
32 * 12 = 1500 MHz
33 * 13 = 1600 MHz
34 * 14 = 1800 MHz
35 * 15 = 2000 MHz
41 * 5 = (1/4) * CPU
44 * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282)
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/usb/dvb-usb-v2/ |
| D | af9035.h | 81 16384000, /* 16.38 MHz */
82 20480000, /* 20.48 MHz */
83 36000000, /* 36.00 MHz */
84 30000000, /* 30.00 MHz */
85 26000000, /* 26.00 MHz */
86 28000000, /* 28.00 MHz */
87 32000000, /* 32.00 MHz */
88 34000000, /* 34.00 MHz */
89 24000000, /* 24.00 MHz */
90 22000000, /* 22.00 MHz */
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/usb/dvb-usb-v2/ |
| D | af9035.h | 81 16384000, /* 16.38 MHz */
82 20480000, /* 20.48 MHz */
83 36000000, /* 36.00 MHz */
84 30000000, /* 30.00 MHz */
85 26000000, /* 26.00 MHz */
86 28000000, /* 28.00 MHz */
87 32000000, /* 32.00 MHz */
88 34000000, /* 34.00 MHz */
89 24000000, /* 24.00 MHz */
90 22000000, /* 22.00 MHz */
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/intel/ice/ |
| D | ice_ptp_consts.h | 23 /* ICE_TIME_REF_FREQ_25_000 -> 25 MHz */
26 823437500, /* 823.4375 MHz PLL */
33 /* ICE_TIME_REF_FREQ_122_880 -> 122.88 MHz */
36 783360000, /* 783.36 MHz */
43 /* ICE_TIME_REF_FREQ_125_000 -> 125 MHz */
46 796875000, /* 796.875 MHz */
53 /* ICE_TIME_REF_FREQ_153_600 -> 153.6 MHz */
56 816000000, /* 816 MHz */
63 /* ICE_TIME_REF_FREQ_156_250 -> 156.25 MHz */
66 830078125, /* 830.78125 MHz */
[all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/ |
| D | smu11_driver_if_vangogh.h | 45 uint16_t Freq; // in MHz
50 uint16_t MinClock; // This is either DCFCLK or SOCCLK (in MHz)
51 uint16_t MaxClock; // This is either DCFCLK or SOCCLK (in MHz)
109 #define NUM_VCN_DPM_LEVELS 5
124 //Freq in MHz
160 #define THROTTLER_STATUS_BIT_THM_GFX 5
168 uint16_t GfxclkFrequency; //[MHz]
169 uint16_t SocclkFrequency; //[MHz]
170 uint16_t VclkFrequency; //[MHz]
171 uint16_t DclkFrequency; //[MHz]
[all …]
|
| /kernel/linux/linux-5.10/drivers/clk/spear/ |
| D | spear1310_clock.c | 131 #define SPEAR1310_SMI_CLK_ENB 5
143 #define SPEAR1310_GPT3_CLK_ENB 5
164 #define SPEAR1310_C48M_CLK_ENB 5
223 #define SPEAR1310_PCI_CLK_ENB 5
234 /* PCLK 24MHz */
235 {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
236 {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
237 {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
238 {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
239 {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
[all …]
|
| /kernel/linux/linux-6.6/drivers/clk/spear/ |
| D | spear1310_clock.c | 128 #define SPEAR1310_SMI_CLK_ENB 5
140 #define SPEAR1310_GPT3_CLK_ENB 5
161 #define SPEAR1310_C48M_CLK_ENB 5
220 #define SPEAR1310_PCI_CLK_ENB 5
231 /* PCLK 24MHz */
232 {.mode = 0, .m = 0x83, .n = 0x04, .p = 0x5}, /* vco 1572, pll 49.125 MHz */
233 {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x3}, /* vco 1000, pll 125 MHz */
234 {.mode = 0, .m = 0x64, .n = 0x06, .p = 0x1}, /* vco 800, pll 400 MHz */
235 {.mode = 0, .m = 0x7D, .n = 0x06, .p = 0x1}, /* vco 1000, pll 500 MHz */
236 {.mode = 0, .m = 0xA6, .n = 0x06, .p = 0x1}, /* vco 1328, pll 664 MHz */
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/exynos/ |
| D | exynos5433-tmu.dtsi | 42 atlas0_alert_5: atlas0-alert-5 {
56 /* Set maximum frequency as 1800MHz */
62 /* Set maximum frequency as 1700MHz */
68 /* Set maximum frequency as 1600MHz */
74 /* Set maximum frequency as 1500MHz */
76 cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
77 <&cpu6 4 5>, <&cpu7 4 5>;
80 /* Set maximum frequency as 1400MHz */
82 cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
83 <&cpu6 5 7>, <&cpu7 5 7>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/exynos/ |
| D | exynos5433-tmu.dtsi | 42 atlas0_alert_5: atlas0-alert-5 {
56 /* Set maximum frequency as 1800MHz */
62 /* Set maximum frequency as 1700MHz */
68 /* Set maximum frequency as 1600MHz */
74 /* Set maximum frequency as 1500MHz */
76 cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
77 <&cpu6 4 5>, <&cpu7 4 5>;
80 /* Set maximum frequency as 1400MHz */
82 cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
83 <&cpu6 5 7>, <&cpu7 5 7>;
[all …]
|
| /kernel/linux/linux-6.6/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
85 # 5 chars 1 lines
95 # D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz
[all …]
|
| /kernel/linux/linux-5.10/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
85 # 5 chars 1 lines
95 # D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/vt6655/ |
| D | rf.c | 57 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 1, Tf = 2412MHz */
58 0x03F79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 2, Tf = 2417MHz */
59 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 3, Tf = 2422MHz */
60 0x03E79000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 4, Tf = 2427MHz */
61 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 5, Tf = 2432MHz */
62 0x03F7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 6, Tf = 2437MHz */
63 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 7, Tf = 2442MHz */
64 0x03E7A000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 8, Tf = 2447MHz */
65 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 9, Tf = 2452MHz */
66 0x03F7B000 + (BY_AL2230_REG_LEN << 3) + IFREGCTL_REGW, /* channel = 10, Tf = 2457MHz */
[all …]
|