| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/regulator/ |
| D | mps,mpq7920.yaml | 59 corresponding values 150us, 300us, 610us, 920us
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | mps,mpq7920.yaml | 58 corresponding values 150us, 300us, 610us, 920us
|
| /kernel/linux/linux-6.6/drivers/usb/misc/ |
| D | onboard_usb_hub.h | 10 unsigned long reset_us; /* reset pulse width in us */
65 { .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/qcom/ |
| D | sdm670.dtsi | 39 capacity-dmips-mhz = <610>;
66 capacity-dmips-mhz = <610>;
88 capacity-dmips-mhz = <610>;
110 capacity-dmips-mhz = <610>;
132 capacity-dmips-mhz = <610>;
154 capacity-dmips-mhz = <610>;
258 entry-latency-us = <702>;
259 exit-latency-us = <915>;
260 min-residency-us = <1617>;
268 entry-latency-us = <526>;
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/rc/ |
| D | nuvoton-cir.h | 131 /* select sample period as 50us */
318 * 43ms / 50us (sample period) * 0.85 (inaccuracy)
323 * 26ms / 50us (sample period) * 0.85 (inaccuracy)
326 #define KEYBOARD_BUF_LEN_MIN 610
329 * 24ms / 50us (sample period) * 0.85 (inaccuracy)
|
| /kernel/linux/linux-5.10/drivers/media/rc/ |
| D | nuvoton-cir.h | 131 /* select sample period as 50us */
318 * 43ms / 50us (sample period) * 0.85 (inaccuracy)
323 * 26ms / 50us (sample period) * 0.85 (inaccuracy)
326 #define KEYBOARD_BUF_LEN_MIN 610
329 * 24ms / 50us (sample period) * 0.85 (inaccuracy)
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/freescale/ |
| D | imx8mp-debix-som-a-bmb-08.dts | 31 startup-delay-us = <50000>;
32 off-on-delay-us = <110000>;
117 reset-assert-us = <20000>;
118 reset-deassert-us = <150000>;
144 reset-assert-us = <20000>;
145 reset-deassert-us = <150000>;
280 compatible = "usb5e3,610";
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/amlogic/ |
| D | meson8b-odroidc1.dts | 221 reset-assert-us = <10000>;
222 reset-deassert-us = <80000>;
378 compatible = "usb5e3,610";
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/amlogic/ |
| D | meson-gxbb-odroidc2.dts | 241 reset-assert-us = <10000>;
242 reset-deassert-us = <80000>;
408 compatible = "usb5e3,610";
|
| /kernel/linux/linux-6.6/drivers/phy/cadence/ |
| D | phy-cadence-salvo.c | 113 * Gate how many us for the txvalid signal until analog
117 /* 0us, txvalid is ready just after HS/FS transmitters have powered up */
350 if (val < 610) in cdns_salvo_phy_probe()
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/rockchip/ |
| D | rk3399-eaidk-610.dts | 14 model = "OPEN AI LAB EAIDK-610";
15 compatible = "openailab,eaidk-610", "rockchip,rk3399";
284 snps,reset-delays-us = <0 10000 50000>;
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/nvidia/ |
| D | tegra210-p3450-0000.dts | 240 maxim,suspend-fps-time-period-us = <5120>;
245 maxim,suspend-fps-time-period-us = <5120>;
381 regulator-disable-ramp-delay = <610>;
619 nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
845 regulator-settling-time-us = <160>;
|
| /kernel/linux/linux-6.6/arch/m68k/mac/ |
| D | config.c | 366 * confuse us. The 840AV has a SCSI location of its own (same as
390 .name = "Quadra 610",
568 .name = "Centris 610",
|
| /kernel/linux/linux-5.10/arch/m68k/mac/ |
| D | config.c | 365 * confuse us. The 840AV has a SCSI location of its own (same as
389 .name = "Quadra 610",
567 .name = "Centris 610",
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/msm/adreno/ |
| D | adreno_gpu.h | 321 return adreno_is_revn(gpu, 610); in adreno_is_a610()
550 * as performance counters) this allows us to protect a much larger range with a
|
| D | adreno_device.c | 273 .revn = 610,
802 * suspend isn't racing with scheduler kthread feeding us in suspend_scheduler()
|
| /kernel/linux/linux-6.6/drivers/staging/vme_user/ |
| D | vme_tsi148.h | 506 * offset 10 610 - Mailbox0
701 #define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */
702 #define TSI148_LCSR_VMCTRL_ATO_128 BIT(16) /* 128 us */
703 #define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */
711 #define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */
712 #define TSI148_LCSR_VMCTRL_VTOFF_1 BIT(12) /* 1us */
713 #define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */
714 #define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */
715 #define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */
716 #define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */
[all …]
|
| /kernel/linux/linux-5.10/drivers/vme/bridges/ |
| D | vme_tsi148.h | 509 * offset 10 610 - Mailbox0
707 #define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */
708 #define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */
709 #define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */
717 #define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */
718 #define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */
719 #define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */
720 #define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */
721 #define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */
722 #define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */
[all …]
|
| /kernel/linux/linux-5.10/arch/x86/kernel/acpi/ |
| D | boot.c | 212 * counting disabled CPUs. This allows us to size in acpi_parse_x2apic()
249 * counting disabled CPUs. This allows us to size in acpi_parse_lapic()
1255 * Dell Precision Workstation 410, 610 come here. in early_acpi_process_madt()
1293 * Dell Precision Workstation 410, 610 come here. in acpi_process_madt()
|
| /kernel/linux/linux-6.6/arch/x86/kernel/acpi/ |
| D | boot.c | 237 * counting disabled CPUs. This allows us to size in acpi_parse_x2apic()
278 * counting disabled CPUs. This allows us to size in acpi_parse_lapic()
1350 * Dell Precision Workstation 410, 610 come here. in early_acpi_process_madt()
1395 * Dell Precision Workstation 410, 610 come here. in acpi_process_madt()
|
| /kernel/linux/linux-6.6/drivers/thermal/ |
| D | rockchip_thermal.c | 225 #define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */
299 {610, 110000},
746 usleep_range(15, 100); /* The spec note says at least 15 us */ in rk_tsadcv3_initialize()
749 usleep_range(90, 200); /* The spec note says at least 90 us */ in rk_tsadcv3_initialize()
803 * than 10us between the rising edge of tsadc_tsen_en in rk_tsadcv7_initialize()
813 * than 90us after the rising edge of tsadc_ana_reg_0/1/2. in rk_tsadcv7_initialize()
|
| /kernel/linux/linux-5.10/sound/soc/codecs/ |
| D | tlv320aic31xx.c | 269 "0us", "15.3us", "153us", "1.53ms", "15.3ms", "76.2ms",
270 "153ms", "304ms", "610ms", "1.22s", "3.04s", "6.1s" };
375 "%s: Failed! 0x%x was 0x%x expected 0x%x (%d, 0x%x, %d us)\n", in aic31xx_wait_bits()
|
| /kernel/linux/linux-5.10/Documentation/admin-guide/media/ |
| D | bttv.rst | 457 Many thanks to Matrix-Vision for giving us 2 cards for free which made
754 - WinView 610 (Zoran)
761 Author of this section: Jon Tombs <jon@gte.esi.us.es>
876 M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_
887 - US site has different drivers for (as of 09/2002):
1258 US models
1728 - MATRIX Vision for giving us 2 cards for free, which made support of
|
| /kernel/linux/linux-6.6/Documentation/admin-guide/media/ |
| D | bttv.rst | 458 Many thanks to Matrix-Vision for giving us 2 cards for free which made
755 - WinView 610 (Zoran)
762 Author of this section: Jon Tombs <jon@gte.esi.us.es>
877 M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_
888 - US site has different drivers for (as of 09/2002):
1259 US models
1729 - MATRIX Vision for giving us 2 cards for free, which made support of
|
| /kernel/linux/linux-5.10/drivers/thermal/ |
| D | rockchip_thermal.c | 276 {610, 110000},
674 usleep_range(15, 100); /* The spec note says at least 15 us */ in rk_tsadcv3_initialize()
677 usleep_range(90, 200); /* The spec note says at least 90 us */ in rk_tsadcv3_initialize()
|