| /kernel/linux/linux-6.6/drivers/video/fbdev/ |
| D | macmodes.c | 36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
49 "mac7", 75, 640, 870, 17457, 80, 32, 42, 3, 80, 3,
52 /* 800x600, 56 Hz, Non-Interlaced (36.00 MHz dotclock) */
56 /* 800x600, 60 Hz, Non-Interlaced (40.00 MHz dotclock) */
60 /* 800x600, 72 Hz, Non-Interlaced (50.00 MHz dotclock) */
64 /* 800x600, 75 Hz, Non-Interlaced (49.50 MHz dotclock) */
65 "mac12", 75, 800, 600, 20203, 144, 32, 21, 1, 80, 3,
[all …]
|
| D | valkyriefb.h | 79 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
90 /* Register values for 1024x768, 75Hz mode (17) */
102 { 11, 28, 3 }, /* pixel clock = 79.55MHz for V=74.50Hz */
108 /* This used to be 12, 30, 3 for pixel clock = 78.12MHz for V=72.12Hz, but
118 { 12, 29, 3 }, /* pixel clock = 75.52MHz for V=69.71Hz? */
129 { 15, 31, 3 }, /* pixel clock = 64.58MHz for V=59.62Hz */
135 /* Register values for 832x624, 75Hz mode (13) */
138 { 23, 42, 3 }, /* pixel clock = 57.07MHz for V=74.27Hz */
146 { 17, 27, 3 }, /* pixel clock = 49.63MHz for V=71.66Hz */
154 { 25, 32, 3 }, /* pixel clock = 40.0015MHz,
[all …]
|
| D | controlfb.h | 97 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
126 {{-1,-1}}, /* 640x870, 75Hz (portrait) */
131 {{ 2, 2}}, /* 800x600, 75Hz */
132 {{ 1, 2}}, /* 832x624, 75Hz */
135 {{ 1, 2}}, /* 1024x768, 75Hz (VESA) */
136 {{ 1, 2}}, /* 1024x768, 75Hz */
137 {{ 1, 2}}, /* 1152x870, 75Hz */
138 {{ 0, 1}}, /* 1280x960, 75Hz */
139 {{ 0, 1}}, /* 1280x1024, 75Hz */
|
| D | platinumfb.h | 54 * F = 14.3MHz * c0 / (c1 & 0x1f) / (1 << (c1 >> 5))
57 * F = 15MHz * c0 / ((c1 & 0x1f) + 2) / (1 << (c1 >> 5))
74 /* 1280x1024, 75Hz (20) */
86 /* 1280x960, 75Hz (19) */
98 /* 1152x870, 75Hz (18) */
110 /* 1024x768, 75Hz (17) */
122 /* 1024x768, 75Hz (16) */
158 /* 832x624, 75Hz (13) */
172 /* 800x600, 75Hz (12) */
232 /* 640x870, 75Hz Portrait (7) */
[all …]
|
| /kernel/linux/linux-5.10/drivers/video/fbdev/ |
| D | macmodes.c | 36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
49 "mac7", 75, 640, 870, 17457, 80, 32, 42, 3, 80, 3,
52 /* 800x600, 56 Hz, Non-Interlaced (36.00 MHz dotclock) */
56 /* 800x600, 60 Hz, Non-Interlaced (40.00 MHz dotclock) */
60 /* 800x600, 72 Hz, Non-Interlaced (50.00 MHz dotclock) */
64 /* 800x600, 75 Hz, Non-Interlaced (49.50 MHz dotclock) */
65 "mac12", 75, 800, 600, 20203, 144, 32, 21, 1, 80, 3,
[all …]
|
| D | valkyriefb.h | 79 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
90 /* Register values for 1024x768, 75Hz mode (17) */
102 { 11, 28, 3 }, /* pixel clock = 79.55MHz for V=74.50Hz */
108 /* This used to be 12, 30, 3 for pixel clock = 78.12MHz for V=72.12Hz, but
118 { 12, 29, 3 }, /* pixel clock = 75.52MHz for V=69.71Hz? */
129 { 15, 31, 3 }, /* pixel clock = 64.58MHz for V=59.62Hz */
135 /* Register values for 832x624, 75Hz mode (13) */
138 { 23, 42, 3 }, /* pixel clock = 57.07MHz for V=74.27Hz */
146 { 17, 27, 3 }, /* pixel clock = 49.63MHz for V=71.66Hz */
154 { 25, 32, 3 }, /* pixel clock = 40.0015MHz,
[all …]
|
| D | controlfb.h | 97 * 3.9064MHz * 2**clock_params[2] * clock_params[1] / clock_params[0].
126 {{-1,-1}}, /* 640x870, 75Hz (portrait) */
131 {{ 2, 2}}, /* 800x600, 75Hz */
132 {{ 1, 2}}, /* 832x624, 75Hz */
135 {{ 1, 2}}, /* 1024x768, 75Hz (VESA) */
136 {{ 1, 2}}, /* 1024x768, 75Hz */
137 {{ 1, 2}}, /* 1152x870, 75Hz */
138 {{ 0, 1}}, /* 1280x960, 75Hz */
139 {{ 0, 1}}, /* 1280x1024, 75Hz */
|
| D | platinumfb.h | 54 * F = 14.3MHz * c0 / (c1 & 0x1f) / (1 << (c1 >> 5))
57 * F = 15MHz * c0 / ((c1 & 0x1f) + 2) / (1 << (c1 >> 5))
74 /* 1280x1024, 75Hz (20) */
86 /* 1280x960, 75Hz (19) */
98 /* 1152x870, 75Hz (18) */
110 /* 1024x768, 75Hz (17) */
122 /* 1024x768, 75Hz (16) */
158 /* 832x624, 75Hz (13) */
172 /* 800x600, 75Hz (12) */
232 /* 640x870, 75Hz Portrait (7) */
[all …]
|
| /kernel/linux/linux-6.6/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
52 mode "640x480-75"
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
95 # D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz
[all …]
|
| D | s3fb.rst | 39 lower pixclocks (maximum usually between 50-60 MHz, depending on specific
40 hardware, i get best results from plain S3 Trio32 card - about 75 MHz). This
|
| /kernel/linux/linux-5.10/Documentation/fb/ |
| D | viafb.modes | 10 # 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock)
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
35 # 640x480, 75 Hz, Non-Interlaced (31.50 MHz dotclock)
52 mode "640x480-75"
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
56 # 640x480, 85 Hz, Non-Interlaced (36.000 MHz dotclock)
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
77 # 640x480, 100 Hz, Non-Interlaced (43.163 MHz dotclock)
95 # D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz
[all …]
|
| D | s3fb.rst | 39 lower pixclocks (maximum usually between 50-60 MHz, depending on specific
40 hardware, i get best results from plain S3 Trio32 card - about 75 MHz). This
|
| /kernel/linux/linux-5.10/arch/arm/mach-omap2/ |
| D | timer.c | 53 * at a rate of 6.144 MHz. Because the device operates on different clocks
86 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2 in realtime_counter_init()
87 * (OR sysclk * 75 / 244) in realtime_counter_init()
98 * should compensate to avoid the 570ppm (at 20MHz, much worse in realtime_counter_init()
103 num = 75; in realtime_counter_init()
137 /* Program it for 38.4 MHz */ in realtime_counter_init()
|
| /kernel/linux/linux-6.6/arch/arm/mach-omap2/ |
| D | timer.c | 53 * at a rate of 6.144 MHz. Because the device operates on different clocks
86 * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2 in realtime_counter_init()
87 * (OR sysclk * 75 / 244) in realtime_counter_init()
98 * should compensate to avoid the 570ppm (at 20MHz, much worse in realtime_counter_init()
103 num = 75; in realtime_counter_init()
137 /* Program it for 38.4 MHz */ in realtime_counter_init()
|
| /kernel/linux/linux-5.10/tools/edid/ |
| D | edid.S | 152 Bit 2 640x480 @ 75 Hz
158 Bit 6 800x600 @ 75 Hz
159 Bit 5 832x624 @ 75 Hz
163 Bit 1 1024x768 @ 75 Hz
164 Bit 0 1280x1024 @ 75 Hz */
167 /* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II)
181 /* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
262 to 10 MHz multiple (10-2550 MHz) */
|
| /kernel/linux/linux-6.6/tools/edid/ |
| D | edid.S | 152 Bit 2 640x480 @ 75 Hz
158 Bit 6 800x600 @ 75 Hz
159 Bit 5 832x624 @ 75 Hz
163 Bit 1 1024x768 @ 75 Hz
164 Bit 0 1280x1024 @ 75 Hz */
167 /* Bit 7 1152x870 @ 75 Hz (Apple Macintosh II)
181 /* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
262 to 10 MHz multiple (10-2550 MHz) */
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/amd/pm/inc/ |
| D | smu11_driver_if_arcturus.h | 514 uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz
515 uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz
516 uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz
517 uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz
518 uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz
519 uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz
524 uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz
528 uint16_t GfxclkFidle; // In MHz
531 uint16_t GfxclkDsMaxFreq; // In MHz
631 uint16_t BasePerformanceFrequencyCap; //In Mhz
[all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/ |
| D | smu11_driver_if_arcturus.h | 515 uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz
516 uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz
517 uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz
518 uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz
519 uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz
520 uint16_t FreqTableFclk [NUM_FCLK_DPM_LEVELS ]; // In MHz
525 uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz
529 uint16_t GfxclkFidle; // In MHz
532 uint16_t GfxclkDsMaxFreq; // In MHz
632 uint16_t BasePerformanceFrequencyCap; //In Mhz
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/wan/ |
| D | slic_ds26522.c | 99 /* RSYSCLK=2.048MHz, RSYNC-Output */ in ds26522_e1_spec_config()
106 /* TSYSCLK=2.048MHz, TSYNC-Output */ in ds26522_e1_spec_config()
127 /* E1 Mode default 75 ohm w/Transmit Impedance Matlinking */ in ds26522_e1_spec_config()
131 /* E1 Mode default 75 ohm Long Haul w/Receive Impedance Matlinking */ in ds26522_e1_spec_config()
|
| /kernel/linux/linux-6.6/drivers/net/wan/ |
| D | slic_ds26522.c | 99 /* RSYSCLK=2.048MHz, RSYNC-Output */ in ds26522_e1_spec_config()
106 /* TSYSCLK=2.048MHz, TSYNC-Output */ in ds26522_e1_spec_config()
127 /* E1 Mode default 75 ohm w/Transmit Impedance Matlinking */ in ds26522_e1_spec_config()
131 /* E1 Mode default 75 ohm Long Haul w/Receive Impedance Matlinking */ in ds26522_e1_spec_config()
|
| /kernel/linux/linux-6.6/drivers/net/wireless/mediatek/mt7601u/ |
| D | initvals_phy.h | 29 RF_REG_PAIR(0, 13, 0x00), /* 40mhz xtal */
30 /* RF_REG_PAIR(0, 13, 0x13), */ /* 20mhz xtal */
201 { 75, 0x60 },
223 { 75, 0x5e },
233 { 75, 0x5c },
242 { 75, 0x60 },
|
| /kernel/linux/linux-5.10/drivers/net/wireless/mediatek/mt7601u/ |
| D | initvals_phy.h | 29 RF_REG_PAIR(0, 13, 0x00), /* 40mhz xtal */
30 /* RF_REG_PAIR(0, 13, 0x13), */ /* 20mhz xtal */
201 { 75, 0x60 },
223 { 75, 0x5e },
233 { 75, 0x5c },
242 { 75, 0x60 },
|
| /kernel/linux/linux-5.10/drivers/clk/ |
| D | clk-vt8500.c | 380 * Where O1 is 900MHz...3GHz;
381 * O2 is 600MHz >= (M * parent) / P >= 300MHz;
382 * M is 36...120 [25MHz parent]; D is 1 or 2 or 4 or 8.
384 * D = 8: 37,5MHz...75MHz
385 * D = 4: 75MHz...150MHz
386 * D = 2: 150MHz...300MHz
387 * D = 1: 300MHz...600MHz
427 /* calculate frequency (MHz) after pre-divisor */ in wm8750_get_filter()
431 pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n", in wm8750_get_filter()
|
| /kernel/linux/linux-6.6/drivers/clk/ |
| D | clk-vt8500.c | 380 * Where O1 is 900MHz...3GHz;
381 * O2 is 600MHz >= (M * parent) / P >= 300MHz;
382 * M is 36...120 [25MHz parent]; D is 1 or 2 or 4 or 8.
384 * D = 8: 37,5MHz...75MHz
385 * D = 4: 75MHz...150MHz
386 * D = 2: 150MHz...300MHz
387 * D = 1: 300MHz...600MHz
427 /* calculate frequency (MHz) after pre-divisor */ in wm8750_get_filter()
431 pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n", in wm8750_get_filter()
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/loongson/ |
| D | lsdc_pixpll.c | 61 {174500, 1920, 1080, 75, 17, 89, 3}, /* 1920x1080@75Hz */
62 {181250, 2560, 1080, 75, 8, 58, 4}, /* 2560x1080@75Hz */
66 {135000, 1280, 1024, 75, 10, 54, 4}, /* 1280x1024@75Hz */
71 /* 1152x864@75Hz */
81 {78750, 1024, 768, 75, 16, 63, 5}, /* 1024x768@75Hz */
87 {57284, 832, 624, 75, 24, 55, 4}, /* 832x624@75Hz */
88 {49500, 800, 600, 75, 40, 99, 5}, /* 800x600@75Hz */
92 {31500, 640, 480, 75, 40, 63, 5}, /* 640x480@75Hz */
95 {30240, 640, 480, 67, 62, 75, 4}, /* 640x480@67Hz */
182 * refclk is determined by the oscillator mounted on motherboard(100MHz
|