| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | pcf8591.rst | 25 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
29 The PCF8591 has 4 analog inputs programmable as single-ended or
30 differential inputs:
32 - mode 0 : four single ended inputs
33 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
35 - mode 1 : three differential inputs
37 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
40 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
44 - mode 3 : two differential inputs
59 - 0 = four single ended inputs
[all …]
|
| D | adm1026.rst | 23 List of GPIO pins (0-16) to program as inputs
50 sensor inputs and one internal sensor. Each sensor has a high and low
68 measurements. Several inputs have integrated attenuators so they can measure
70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
71 for SCSI terminator power. The remaining inputs are not scaled and have
82 The ADM1026 measures continuously. Analog inputs are measured about 4
87 temperature sensor inputs. Both the PWM output and the DAC output can be
|
| D | adt7475.rst | 51 measurement inputs and VID support. The ADT7490 also has additional
52 features, including extra voltage measurement inputs and PECI support. All
69 Each of the measured inputs (voltage, temperature, fan speed) has
73 The ADT747x samples all inputs continuously. The driver will not read
81 * 2 voltage inputs
85 * 2 voltage inputs
88 * 5 voltage inputs
92 * 6 voltage inputs
|
| /kernel/linux/linux-6.6/Documentation/hwmon/ |
| D | pcf8591.rst | 25 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
29 The PCF8591 has 4 analog inputs programmable as single-ended or
30 differential inputs:
32 - mode 0 : four single ended inputs
33 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
35 - mode 1 : three differential inputs
37 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
40 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
44 - mode 3 : two differential inputs
59 - 0 = four single ended inputs
[all …]
|
| D | adm1026.rst | 23 List of GPIO pins (0-16) to program as inputs
50 sensor inputs and one internal sensor. Each sensor has a high and low
68 measurements. Several inputs have integrated attenuators so they can measure
70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
71 for SCSI terminator power. The remaining inputs are not scaled and have
82 The ADM1026 measures continuously. Analog inputs are measured about 4
87 temperature sensor inputs. Both the PWM output and the DAC output can be
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/ioctl/ |
| D | cdrom.rst | 108 inputs:
129 inputs:
153 inputs:
184 inputs:
213 inputs:
238 inputs:
268 inputs:
293 inputs:
319 inputs:
346 inputs:
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/ioctl/ |
| D | cdrom.rst | 105 inputs:
126 inputs:
150 inputs:
181 inputs:
210 inputs:
235 inputs:
265 inputs:
290 inputs:
316 inputs:
343 inputs:
[all …]
|
| D | hdio.rst | 97 inputs:
151 inputs:
173 inputs:
202 inputs:
224 inputs:
287 inputs:
321 inputs:
347 inputs:
375 inputs:
402 inputs:
[all …]
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/media/v4l/ |
| D | audio.rst | 6 Audio Inputs and Outputs
9 Audio inputs and outputs are physical connectors of a device. Video
10 capture devices have inputs, output devices have outputs, zero or more
11 each. Radio devices have no audio inputs or outputs. They have exactly
13 tuners with video inputs or outputs only, and radio devices have none of
17 Audio and video inputs and outputs are associated. Selecting a video
20 more than one video input or output. Assumed two composite video inputs
21 and two audio inputs exist, there may be up to four valid combinations.
28 To learn about the number and attributes of the available inputs and
53 multiple selectable audio inputs, all audio output ioctls when the
[all …]
|
| D | video.rst | 6 Video Inputs and Outputs
9 Video inputs and outputs are physical connectors of a device. These can
12 be a video input. Video and VBI capture devices have inputs. Video and
14 no video inputs or outputs.
16 To learn about the number and attributes of the available inputs and
29 implement all the input ioctls when the device has one or more inputs,
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | audio.rst | 6 Audio Inputs and Outputs
9 Audio inputs and outputs are physical connectors of a device. Video
10 capture devices have inputs, output devices have outputs, zero or more
11 each. Radio devices have no audio inputs or outputs. They have exactly
13 tuners with video inputs or outputs only, and radio devices have none of
17 Audio and video inputs and outputs are associated. Selecting a video
20 more than one video input or output. Assumed two composite video inputs
21 and two audio inputs exist, there may be up to four valid combinations.
28 To learn about the number and attributes of the available inputs and
53 multiple selectable audio inputs, all audio output ioctls when the
[all …]
|
| D | video.rst | 6 Video Inputs and Outputs
9 Video inputs and outputs are physical connectors of a device. These can
12 be a video input. Video and VBI capture devices have inputs. Video and
14 no video inputs or outputs.
16 To learn about the number and attributes of the available inputs and
29 implement all the input ioctls when the device has one or more inputs,
|
| /kernel/linux/linux-5.10/include/media/drv-intf/ |
| D | msp3400.h | 3 msp3400.h - definition for msp3400 inputs and outputs
19 Inputs
22 There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
24 selected tuner input, the selected SCART input and all I2S inputs go to
38 SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
56 ignore or mute certain inputs or outputs.
58 Also, depending on the msp version only a subset of the inputs or
63 /* Inputs to the DSP unit: two independent selections have to be made:
93 There are up to 16 DSP inputs to choose from, so each output is
96 Note: the 44x8G can mix two inputs and feed the result back to the
[all …]
|
| /kernel/linux/linux-6.6/include/media/drv-intf/ |
| D | msp3400.h | 3 msp3400.h - definition for msp3400 inputs and outputs
19 Inputs
22 There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
24 selected tuner input, the selected SCART input and all I2S inputs go to
38 SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
56 ignore or mute certain inputs or outputs.
58 Also, depending on the msp version only a subset of the inputs or
63 /* Inputs to the DSP unit: two independent selections have to be made:
93 There are up to 16 DSP inputs to choose from, so each output is
96 Note: the 44x8G can mix two inputs and feed the result back to the
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/comedi/drivers/ |
| D | pcl730.c | 45 * BASE+0 Isolated outputs 0-7 (write) / inputs 0-7 (read)
46 * BASE+1 Isolated outputs 8-15 (write) / inputs 8-15 (read)
47 * BASE+2 TTL outputs 0-7 (write) / inputs 0-7 (read)
48 * BASE+3 TTL outputs 8-15 (write) / inputs 8-15 (read)
55 * BASE+1 Isolated inputs 0-7 (read)
61 * BASE+2 Isolated inputs 0-7 (read)
62 * BASE+3 Isolated inputs 8-15 (read)
66 * BASE+0 Isolated outputs 0-7 (write) or inputs 0-7 (read)
67 * BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
68 * BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
[all …]
|
| /kernel/linux/linux-6.6/drivers/comedi/drivers/ |
| D | pcl730.c | 45 * BASE+0 Isolated outputs 0-7 (write) / inputs 0-7 (read)
46 * BASE+1 Isolated outputs 8-15 (write) / inputs 8-15 (read)
47 * BASE+2 TTL outputs 0-7 (write) / inputs 0-7 (read)
48 * BASE+3 TTL outputs 8-15 (write) / inputs 8-15 (read)
55 * BASE+1 Isolated inputs 0-7 (read)
61 * BASE+2 Isolated inputs 0-7 (read)
62 * BASE+3 Isolated inputs 8-15 (read)
66 * BASE+0 Isolated outputs 0-7 (write) or inputs 0-7 (read)
67 * BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
68 * BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/pci/saa7134/ |
| D | saa7134-cards.c | 64 .inputs = {{
79 .inputs = {{
107 .inputs = {{
154 .inputs = {{
195 .inputs = {{
224 .inputs = {{
272 .inputs = { {
319 .inputs = {{
348 .inputs = {{
373 .inputs = {{
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/pci/saa7134/ |
| D | saa7134-cards.c | 64 .inputs = {{
79 .inputs = {{
107 .inputs = {{
154 .inputs = {{
195 .inputs = {{
224 .inputs = {{
272 .inputs = { {
319 .inputs = {{
348 .inputs = {{
373 .inputs = {{
[all …]
|
| /kernel/linux/linux-6.6/include/media/i2c/ |
| D | cs53l32a.h | 3 cs53l32a.h - definition for cs53l32a inputs and outputs
12 /* There are 2 physical inputs, but the second input can be
15 possible inputs to choose from. */
17 /* CS53L32A HW inputs */
|
| /kernel/linux/linux-5.10/include/media/i2c/ |
| D | cs53l32a.h | 3 cs53l32a.h - definition for cs53l32a inputs and outputs
12 /* There are 2 physical inputs, but the second input can be
15 possible inputs to choose from. */
17 /* CS53L32A HW inputs */
|
| /kernel/linux/linux-5.10/arch/mips/math-emu/ |
| D | sp_fmin.c | 52 * The case of both inputs quiet NaNs in ieee754sp_fmin()
116 /* Signs of inputs are the same, let's compare exponents */ in ieee754sp_fmin()
118 /* Inputs are both positive */ in ieee754sp_fmin()
124 /* Inputs are both negative */ in ieee754sp_fmin()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754sp_fmin()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754sp_fmin()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754sp_fmin()
178 * The case of both inputs quiet NaNs in ieee754sp_fmina()
|
| D | sp_fmax.c | 52 * The case of both inputs quiet NaNs in ieee754sp_fmax()
116 /* Signs of inputs are equal, let's compare exponents */ in ieee754sp_fmax()
118 /* Inputs are both positive */ in ieee754sp_fmax()
124 /* Inputs are both negative */ in ieee754sp_fmax()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754sp_fmax()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754sp_fmax()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754sp_fmax()
178 * The case of both inputs quiet NaNs in ieee754sp_fmaxa()
|
| /kernel/linux/linux-6.6/arch/mips/math-emu/ |
| D | dp_fmin.c | 52 * The case of both inputs quiet NaNs in ieee754dp_fmin()
116 /* Signs of inputs are the same, let's compare exponents */ in ieee754dp_fmin()
118 /* Inputs are both positive */ in ieee754dp_fmin()
124 /* Inputs are both negative */ in ieee754dp_fmin()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754dp_fmin()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754dp_fmin()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754dp_fmin()
178 * The case of both inputs quiet NaNs in ieee754dp_fmina()
|
| D | dp_fmax.c | 52 * The case of both inputs quiet NaNs in ieee754dp_fmax()
116 /* Signs of inputs are equal, let's compare exponents */ in ieee754dp_fmax()
118 /* Inputs are both positive */ in ieee754dp_fmax()
124 /* Inputs are both negative */ in ieee754dp_fmax()
131 /* Signs and exponents of inputs are equal, let's compare mantissas */ in ieee754dp_fmax()
133 /* Inputs are both positive, with equal signs and exponents */ in ieee754dp_fmax()
138 /* Inputs are both negative, with equal signs and exponents */ in ieee754dp_fmax()
178 * The case of both inputs quiet NaNs in ieee754dp_fmaxa()
|
| /kernel/linux/linux-5.10/Documentation/usb/ |
| D | chipidea.rst | 47 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
55 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
61 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
75 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
76 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
82 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
88 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
96 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
|