| /kernel/linux/linux-5.10/drivers/video/fbdev/ |
| D | fm2fb.c | 2 * linux/drivers/video/fm2fb.c -- BSC FrameMaster II/Rainbow II frame buffer
5 * Copyright (C) 1998 Steffen A. Mork (linux-dev@morknet.de)
32 * channel, GG the green channel and BB the blue channel.
35 * - PAL/NTSC
36 * - interlaced/non interlaced
37 * - composite sync/sync/sync over green
40 * - 768x576 (PAL)
41 * - 768x480 (NTSC)
67 * JP1 interlace selection (1-2 non interlaced/2-3 interlaced)
70 * JP4 modulate composite sync on green output (1-2 composite
[all …]
|
| D | pxa168fb.c | 2 * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
7 * 2009-02-16 adapted from original version for PXA168/910
27 #include <linux/dma-mapping.h>
42 if (var->bits_per_pixel == 8) in determine_best_pix_fmt()
48 if (var->bits_per_pixel == 16 && var->red.length <= 5 && in determine_best_pix_fmt()
49 var->green.length <= 6 && var->blue.length <= 5) { in determine_best_pix_fmt()
50 if (var->transp.length == 0) { in determine_best_pix_fmt()
51 if (var->red.offset >= var->blue.offset) in determine_best_pix_fmt()
57 if (var->transp.length == 1 && var->green.length <= 5) { in determine_best_pix_fmt()
58 if (var->red.offset >= var->blue.offset) in determine_best_pix_fmt()
[all …]
|
| D | fsl-diu-fb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
7 * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
12 * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
22 #include <linux/dma-mapping.h>
33 #include <linux/fsl-diu-fb.h>
52 * order if increasing resolution and frequency. The 320x240-60 mode is
67 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
81 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
95 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
109 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
[all …]
|
| D | mx3fb.c | 1 // SPDX-License-Identifier: GPL-2.0-only
6 * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
21 #include <linux/dma-mapping.h>
26 #include <linux/dma/ipu-dma.h>
29 #include <linux/platform_data/dma-imx.h>
30 #include <linux/platform_data/video-mx3fb.h>
40 #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET)
41 #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET)
42 #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET)
43 #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET)
[all …]
|
| D | cyber2000fb.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 1998-2002 Russell King
15 * Based on cyberfb.c.
22 * are any such cards, but I'm erring on the side of caution. We don't
48 #include <linux/i2c-algo-bit.h>
52 #include <asm/mach-types.h>
73 u8 red, green, blue; member
109 #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg))
110 #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg))
111 #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg))
[all …]
|
| D | macmodes.c | 2 * linux/drivers/video/macmodes.c -- Standard MacOS video modes
6 * 2000 - Removal of OpenFirmware dependencies by:
7 * - Ani Joshi
8 * - Brad Douglas <brad@neruo.com>
10 * 2001 - Documented with DocBook
11 * - Brad Douglas <brad@neruo.com>
36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
[all …]
|
| D | pm2fb.c | 7 * based on 2.4 driver:
8 * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
14 * I have a Creative Graphics Blaster Exxtreme card - pm2fb on x86. I
16 * hopefully other big-endian) devices now work, thanks to a lot of
20 * Multiple boards support has been on the TODO list for ages.
70 * support on TVP4010 and similar where there is no RAMDAC - see
71 * comment in set_video) always request +ve sync regardless of what
73 * fixed-frequency monitor which absolutely has to have -ve sync. So
74 * these flags allow the user to specify that requests for +ve sync
75 * should be silently turned in -ve sync.
[all …]
|
| D | da8xx-fb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (C) 2008-2009 MontaVista Software Inc.
4 * Copyright (C) 2008-2009 Texas Instruments Inc
6 * Based on the LCD driver for TI Avalanche processors written by
12 #include <linux/dma-mapping.h>
27 #include <video/da8xx-fb.h>
113 /* Clock registers available only on Version 2 */
200 .sync = FB_SYNC_CLK_INVERT,
214 .sync = 0,
229 .sync = 0,
[all …]
|
| /kernel/linux/linux-6.6/drivers/video/fbdev/ |
| D | fm2fb.c | 2 * linux/drivers/video/fm2fb.c -- BSC FrameMaster II/Rainbow II frame buffer
5 * Copyright (C) 1998 Steffen A. Mork (linux-dev@morknet.de)
32 * channel, GG the green channel and BB the blue channel.
35 * - PAL/NTSC
36 * - interlaced/non interlaced
37 * - composite sync/sync/sync over green
40 * - 768x576 (PAL)
41 * - 768x480 (NTSC)
67 * JP1 interlace selection (1-2 non interlaced/2-3 interlaced)
70 * JP4 modulate composite sync on green output (1-2 composite
[all …]
|
| D | pxa168fb.c | 2 * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller
7 * 2009-02-16 adapted from original version for PXA168/910
27 #include <linux/dma-mapping.h>
42 if (var->bits_per_pixel == 8) in determine_best_pix_fmt()
48 if (var->bits_per_pixel == 16 && var->red.length <= 5 && in determine_best_pix_fmt()
49 var->green.length <= 6 && var->blue.length <= 5) { in determine_best_pix_fmt()
50 if (var->transp.length == 0) { in determine_best_pix_fmt()
51 if (var->red.offset >= var->blue.offset) in determine_best_pix_fmt()
57 if (var->transp.length == 1 && var->green.length <= 5) { in determine_best_pix_fmt()
58 if (var->red.offset >= var->blue.offset) in determine_best_pix_fmt()
[all …]
|
| D | fsl-diu-fb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
7 * Authors: Hongjun Chen <hong-jun.chen@freescale.com>
12 * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
22 #include <linux/dma-mapping.h>
33 #include <linux/fsl-diu-fb.h>
52 * order if increasing resolution and frequency. The 320x240-60 mode is
67 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
81 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
95 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
109 .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
[all …]
|
| D | cyber2000fb.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 1998-2002 Russell King
15 * Based on cyberfb.c.
22 * are any such cards, but I'm erring on the side of caution. We don't
49 #include <linux/i2c-algo-bit.h>
52 #include <asm/mach-types.h>
73 u8 red, green, blue; member
109 #define cyber2000fb_writel(val, reg, cfb) writel(val, (cfb)->regs + (reg))
110 #define cyber2000fb_writew(val, reg, cfb) writew(val, (cfb)->regs + (reg))
111 #define cyber2000fb_writeb(val, reg, cfb) writeb(val, (cfb)->regs + (reg))
[all …]
|
| D | macmodes.c | 2 * linux/drivers/video/macmodes.c -- Standard MacOS video modes
6 * 2000 - Removal of OpenFirmware dependencies by:
7 * - Ani Joshi
8 * - Brad Douglas <brad@neruo.com>
10 * 2001 - Documented with DocBook
11 * - Brad Douglas <brad@neruo.com>
36 /* 512x384, 60Hz, Non-Interlaced (15.67 MHz dot clock) */
40 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
44 /* 640x480, 67Hz, Non-Interlaced (30.0 MHz dotclock) */
48 /* 640x870, 75Hz (portrait), Non-Interlaced (57.28 MHz dot clock) */
[all …]
|
| D | pm2fb.c | 7 * based on 2.4 driver:
8 * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT)
14 * I have a Creative Graphics Blaster Exxtreme card - pm2fb on x86. I
16 * hopefully other big-endian) devices now work, thanks to a lot of
20 * Multiple boards support has been on the TODO list for ages.
71 * support on TVP4010 and similar where there is no RAMDAC - see
72 * comment in set_video) always request +ve sync regardless of what
74 * fixed-frequency monitor which absolutely has to have -ve sync. So
75 * these flags allow the user to specify that requests for +ve sync
76 * should be silently turned in -ve sync.
[all …]
|
| D | da8xx-fb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright (C) 2008-2009 MontaVista Software Inc.
4 * Copyright (C) 2008-2009 Texas Instruments Inc
6 * Based on the LCD driver for TI Avalanche processors written by
12 #include <linux/dma-mapping.h>
27 #include <video/da8xx-fb.h>
113 /* Clock registers available only on Version 2 */
200 .sync = FB_SYNC_CLK_INVERT,
214 .sync = 0,
229 .sync = 0,
[all …]
|
| D | atafb.c | 2 * linux/drivers/video/atafb.c -- Atari builtin chipset frame buffer device
11 * - 03 Jan 95: Original version by Martin Schaller: The TT driver and
13 * - 09 Jan 95: Roman: I've added the hardware abstraction (hw_switch)
15 * based on the original TT driver.
16 * - 07 May 95: Martin: Added colormap operations for the external driver
17 * - 21 May 95: Martin: Added support for overscan
19 * - Jul 95: Guenther Kelleter <guenther@pool.informatik.rwth-aachen.de>:
23 * - 27 Dec 95: Guenther: Implemented user definable video modes "user[0-7]"
24 * on minor 24...31. "user0" may be set on commandline by
25 * "R<x>;<y>;<depth>". (Makes sense only on Falcon)
[all …]
|
| /kernel/linux/linux-5.10/tools/edid/ |
| D | edid.S | 18 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
48 ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
74 /* Year of manufacture, less 1990. (1990-2245)
76 year: .byte YEAR-1990
82 Bits 6-1 Reserved, must be 0
86 Bits 6-5 Video white and sync levels, relative to blank
87 00=+0.7/-0.3 V; 01=+0.714/-0.286 V;
88 10=+1.0/-0.4 V; 11=+0.7/0 V
89 Bit 4 Blank-to-black setup (pedestal) expected
90 Bit 3 Separate sync supported
[all …]
|
| /kernel/linux/linux-6.6/tools/edid/ |
| D | edid.S | 18 Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
48 ((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
74 /* Year of manufacture, less 1990. (1990-2245)
76 year: .byte YEAR-1990
82 Bits 6-1 Reserved, must be 0
86 Bits 6-5 Video white and sync levels, relative to blank
87 00=+0.7/-0.3 V; 01=+0.714/-0.286 V;
88 10=+1.0/-0.4 V; 11=+0.7/0 V
89 Bit 4 Blank-to-black setup (pedestal) expected
90 Bit 3 Separate sync supported
[all …]
|
| /kernel/linux/linux-5.10/Documentation/fb/ |
| D | api.rst | 9 ---------------
12 with frame buffer devices. In-kernel APIs between device drivers and the frame
22 ---------------
36 - FB_CAP_FOURCC
44 --------------------
46 Pixels are stored in memory in hardware-dependent formats. Applications need
52 bits_per_pixel, grayscale, red, green, blue and transp fields.
58 - FB_TYPE_PACKED_PIXELS
62 next multiple of 8 bits or packed together into bytes depends on the visual.
67 - FB_TYPE_PLANES
[all …]
|
| /kernel/linux/linux-6.6/Documentation/fb/ |
| D | api.rst | 9 ---------------
12 with frame buffer devices. In-kernel APIs between device drivers and the frame
22 ---------------
36 - FB_CAP_FOURCC
44 --------------------
46 Pixels are stored in memory in hardware-dependent formats. Applications need
52 bits_per_pixel, grayscale, red, green, blue and transp fields.
58 - FB_TYPE_PACKED_PIXELS
62 next multiple of 8 bits or packed together into bytes depends on the visual.
67 - FB_TYPE_PLANES
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/media/i2c/ |
| D | tvp7002.txt | 7 - compatible : Must be "ti,tvp7002"
10 - hsync-active: HSYNC Polarity configuration for the bus. Default value when
13 - vsync-active: VSYNC Polarity configuration for the bus. Default value when
16 - pclk-sample: Clock polarity of the bus. Default value when this property is
19 - sync-on-green-active: Active state of Sync-on-green signal property of the
24 - field-even-active: Active-high Field ID output polarity control of the bus.
31 video-interfaces.txt.
44 hsync-active = <1>;
45 vsync-active = <1>;
46 pclk-sample = <0>;
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/media/i2c/ |
| D | tvp7002.txt | 7 - compatible : Must be "ti,tvp7002"
10 - hsync-active: HSYNC Polarity configuration for the bus. Default value when
13 - vsync-active: VSYNC Polarity configuration for the bus. Default value when
16 - pclk-sample: Clock polarity of the bus. Default value when this property is
19 - sync-on-green-active: Active state of Sync-on-green signal property of the
24 - field-even-active: Active-high Field ID output polarity control of the bus.
31 video-interfaces.txt.
44 hsync-active = <1>;
45 vsync-active = <1>;
46 pclk-sample = <0>;
[all …]
|
| /kernel/linux/linux-6.6/drivers/video/fbdev/mmp/fb/ |
| D | mmpfb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
10 #include <linux/dma-mapping.h>
19 if (var->bits_per_pixel == 8) in var_to_pixfmt()
25 if (var->bits_per_pixel == 16 && var->red.length == 8 && in var_to_pixfmt()
26 var->green.length == 4 && var->blue.length == 4) { in var_to_pixfmt()
27 if (var->green.offset >= var->blue.offset) in var_to_pixfmt()
36 if (var->bits_per_pixel == 12 && var->red.length == 8 && in var_to_pixfmt()
37 var->green.length == 2 && var->blue.length == 2) { in var_to_pixfmt()
38 if (var->green.offset >= var->blue.offset) in var_to_pixfmt()
47 if (var->bits_per_pixel == 16 && var->red.length == 16 && in var_to_pixfmt()
[all …]
|
| /kernel/linux/linux-5.10/drivers/video/fbdev/mmp/fb/ |
| D | mmpfb.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
10 #include <linux/dma-mapping.h>
19 if (var->bits_per_pixel == 8) in var_to_pixfmt()
25 if (var->bits_per_pixel == 16 && var->red.length == 8 && in var_to_pixfmt()
26 var->green.length == 4 && var->blue.length == 4) { in var_to_pixfmt()
27 if (var->green.offset >= var->blue.offset) in var_to_pixfmt()
36 if (var->bits_per_pixel == 12 && var->red.length == 8 && in var_to_pixfmt()
37 var->green.length == 2 && var->blue.length == 2) { in var_to_pixfmt()
38 if (var->green.offset >= var->blue.offset) in var_to_pixfmt()
47 if (var->bits_per_pixel == 16 && var->red.length == 16 && in var_to_pixfmt()
[all …]
|
| /kernel/linux/linux-6.6/include/uapi/linux/ |
| D | fb.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
23 /* 0x4607-0x460B are defined below */
51 #define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */
139 #define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */
141 #define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */
143 #define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */
151 #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */
153 #define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */
155 #define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */
195 #define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */
[all …]
|