| /kernel/linux/linux-5.10/drivers/net/phy/ |
| D | phy-core.c | 1 // SPDX-License-Identifier: GPL-2.0+
10 * phy_speed_to_str - Return a string representing the PHY link speed
12 * @speed: Speed of the link
14 const char *phy_speed_to_str(int speed) in phy_speed_to_str() argument
18 "If a speed or mode has been added please update phy_speed_to_str " in phy_speed_to_str()
21 switch (speed) { in phy_speed_to_str()
55 return "Unsupported (update phy-core.c)"; in phy_speed_to_str()
61 * phy_duplex_to_str - Return string describing the duplex
70 return "Full"; in phy_duplex_to_str()
73 return "Unsupported (update phy-core.c)"; in phy_duplex_to_str()
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/phy/ |
| D | phy-core.c | 1 // SPDX-License-Identifier: GPL-2.0+
10 * phy_speed_to_str - Return a string representing the PHY link speed
12 * @speed: Speed of the link
14 const char *phy_speed_to_str(int speed) in phy_speed_to_str() argument
18 "If a speed or mode has been added please update phy_speed_to_str " in phy_speed_to_str()
21 switch (speed) { in phy_speed_to_str()
57 return "Unsupported (update phy-core.c)"; in phy_speed_to_str()
63 * phy_duplex_to_str - Return string describing the duplex
72 return "Full"; in phy_duplex_to_str()
75 return "Unsupported (update phy-core.c)"; in phy_duplex_to_str()
[all …]
|
| /kernel/linux/linux-5.10/drivers/usb/gadget/udc/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 # - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 # - integrated/SOC controllers first
23 # - licensed IP used in both SOC and discrete versions
24 # - discrete ones (including all PCI-only controllers)
[all …]
|
| /kernel/linux/linux-6.6/drivers/usb/gadget/udc/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
7 # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
9 # - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10 # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11 # - Some systems have both kinds of controllers.
13 # With help from a special transceiver and a "Mini-AB" jack, systems with
14 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
22 # - integrated/SOC controllers first
23 # - licensed IP used in both SOC and discrete versions
24 # - discrete ones (including all PCI-only controllers)
[all …]
|
| /kernel/linux/linux-6.6/Documentation/ABI/testing/ |
| D | sysfs-bus-pci-drivers-ehci_hcd | 7 PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
9 "companion" full/low-speed USB-1.1 controllers. When a
10 high-speed device is plugged in, the connection is routed
11 to the EHCI controller; when a full- or low-speed device
15 Sometimes you want to force a high-speed device to connect
16 at full speed, which can be accomplished by forcing the
23 For example: To force the high-speed device attached to
24 port 4 on bus 2 to run at full speed::
28 To return the port to high-speed operation::
30 echo -4 >/sys/bus/usb/devices/usb2/../companion
[all …]
|
| /kernel/linux/linux-5.10/Documentation/ABI/testing/ |
| D | sysfs-bus-pci-drivers-ehci_hcd | 7 PCI-based EHCI USB controllers (i.e., high-speed USB-2.0
9 "companion" full/low-speed USB-1.1 controllers. When a
10 high-speed device is plugged in, the connection is routed
11 to the EHCI controller; when a full- or low-speed device
15 Sometimes you want to force a high-speed device to connect
16 at full speed, which can be accomplished by forcing the
23 For example: To force the high-speed device attached to
24 port 4 on bus 2 to run at full speed::
28 To return the port to high-speed operation::
30 echo -4 >/sys/bus/usb/devices/usb2/../companion
[all …]
|
| /kernel/linux/linux-5.10/net/ethtool/ |
| D | linkmodes.c | 1 // SPDX-License-Identifier: GPL-2.0-only
31 struct net_device *dev = reply_base->dev; in linkmodes_prepare_data()
34 data->lsettings = &data->ksettings.base; in linkmodes_prepare_data()
40 ret = __ethtool_get_link_ksettings(dev, &data->ksettings); in linkmodes_prepare_data()
46 data->peer_empty = in linkmodes_prepare_data()
47 bitmap_empty(data->ksettings.link_modes.lp_advertising, in linkmodes_prepare_data()
59 const struct ethtool_link_ksettings *ksettings = &data->ksettings; in linkmodes_reply_size()
60 const struct ethtool_link_settings *lsettings = &ksettings->base; in linkmodes_reply_size()
61 bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS; in linkmodes_reply_size()
68 ret = ethnl_bitset_size(ksettings->link_modes.advertising, in linkmodes_reply_size()
[all …]
|
| D | common.c | 1 // SPDX-License-Identifier: GPL-2.0-only
11 [NETIF_F_SG_BIT] = "tx-scatter-gather",
12 [NETIF_F_IP_CSUM_BIT] = "tx-checksum-ipv4",
13 [NETIF_F_HW_CSUM_BIT] = "tx-checksum-ip-generic",
14 [NETIF_F_IPV6_CSUM_BIT] = "tx-checksum-ipv6",
16 [NETIF_F_FRAGLIST_BIT] = "tx-scatter-gather-fraglist",
17 [NETIF_F_HW_VLAN_CTAG_TX_BIT] = "tx-vlan-hw-insert",
19 [NETIF_F_HW_VLAN_CTAG_RX_BIT] = "rx-vlan-hw-parse",
20 [NETIF_F_HW_VLAN_CTAG_FILTER_BIT] = "rx-vlan-filter",
21 [NETIF_F_HW_VLAN_STAG_TX_BIT] = "tx-vlan-stag-hw-insert",
[all …]
|
| /kernel/linux/linux-5.10/drivers/usb/gadget/function/ |
| D | u_uvc.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
7 * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
32 * Control descriptors array pointers for full-/high-speed and
33 * super-speed. They point by default to the uvc_fs_control_cls and
41 * Streaming descriptors array pointers for full-speed, high-speed and
42 * super-speed. They will point to the uvc_[fhs]s_streaming_cls arrays
43 * for configfs-based gadgets. Legacy gadgets must initialize them in
50 /* Default control descriptors for configfs-based gadgets. */
57 * Control descriptors pointers arrays for full-/high-speed and
58 * super-speed. The first element is a configurable control header
[all …]
|
| /kernel/linux/linux-6.6/drivers/usb/gadget/function/ |
| D | u_uvc.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
7 * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
36 * Control descriptors array pointers for full-/high-speed and
37 * super-speed. They point by default to the uvc_fs_control_cls and
45 * Streaming descriptors array pointers for full-speed, high-speed and
46 * super-speed. They will point to the uvc_[fhs]s_streaming_cls arrays
47 * for configfs-based gadgets. Legacy gadgets must initialize them in
54 /* Default control descriptors for configfs-based gadgets. */
60 * Control descriptors pointers arrays for full-/high-speed and
61 * super-speed. The first element is a configurable control header
[all …]
|
| /kernel/linux/linux-5.10/Documentation/hwmon/ |
| D | dme1737.rst | 18 Addresses scanned: none, address read from Super-I/O config space
34 Addresses scanned: none, address read from Super-I/O config space
43 -----------------
52 Include non-standard LPC addresses 0x162e and 0x164e
55 - VIA EPIA SN18000
59 -----------
63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
65 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
[all …]
|
| D | vt1211.rst | 10 Addresses scanned: none, address read from Super-I/O config space
24 -----------------
29 configuration for channels 1-5.
30 Legal values are in the range of 0-31. Bit 0 maps to
47 -----------
49 The VIA VT1211 Super-I/O chip includes complete hardware monitoring
52 implements 5 universal input channels (UCH1-5) that can be individually
60 connected to the PWM outputs of the VT1211 :-().
80 ------------------
82 Voltages are sampled by an 8-bit ADC with a LSB of ~10mV. The supported input
[all …]
|
| /kernel/linux/linux-6.6/Documentation/hwmon/ |
| D | dme1737.rst | 18 Addresses scanned: none, address read from Super-I/O config space
34 Addresses scanned: none, address read from Super-I/O config space
43 -----------------
52 Include non-standard LPC addresses 0x162e and 0x164e
55 - VIA EPIA SN18000
59 -----------
63 and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
64 temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and
65 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
66 up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
[all …]
|
| D | vt1211.rst | 10 Addresses scanned: none, address read from Super-I/O config space
24 -----------------
29 configuration for channels 1-5.
30 Legal values are in the range of 0-31. Bit 0 maps to
47 -----------
49 The VIA VT1211 Super-I/O chip includes complete hardware monitoring
52 implements 5 universal input channels (UCH1-5) that can be individually
60 connected to the PWM outputs of the VT1211 :-().
80 ------------------
82 Voltages are sampled by an 8-bit ADC with a LSB of ~10mV. The supported input
[all …]
|
| /kernel/linux/linux-6.6/net/ethtool/ |
| D | common.c | 1 // SPDX-License-Identifier: GPL-2.0-only
12 [NETIF_F_SG_BIT] = "tx-scatter-gather",
13 [NETIF_F_IP_CSUM_BIT] = "tx-checksum-ipv4",
14 [NETIF_F_HW_CSUM_BIT] = "tx-checksum-ip-generic",
15 [NETIF_F_IPV6_CSUM_BIT] = "tx-checksum-ipv6",
17 [NETIF_F_FRAGLIST_BIT] = "tx-scatter-gather-fraglist",
18 [NETIF_F_HW_VLAN_CTAG_TX_BIT] = "tx-vlan-hw-insert",
20 [NETIF_F_HW_VLAN_CTAG_RX_BIT] = "rx-vlan-hw-parse",
21 [NETIF_F_HW_VLAN_CTAG_FILTER_BIT] = "rx-vlan-filter",
22 [NETIF_F_HW_VLAN_STAG_TX_BIT] = "tx-vlan-stag-hw-insert",
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/oki-semi/pch_gbe/ |
| D | pch_gbe_param.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 1999 - 2010 Intel Corporation.
12 #define OPTION_UNSET -1
17 * TxDescriptors - Transmit Descriptor Count
18 * @Valid Range: PCH_GBE_MIN_TXD - PCH_GBE_MAX_TXD
26 * RxDescriptors -Receive Descriptor Count
27 * @Valid Range: PCH_GBE_MIN_RXD - PCH_GBE_MAX_RXD
35 * Speed - User Specified Speed Override
37 * - 0: auto-negotiate at all supported speeds
38 * - 10: only link at 10 Mbps
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/oki-semi/pch_gbe/ |
| D | pch_gbe_param.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 1999 - 2010 Intel Corporation.
12 #define OPTION_UNSET -1
17 * TxDescriptors - Transmit Descriptor Count
18 * @Valid Range: PCH_GBE_MIN_TXD - PCH_GBE_MAX_TXD
26 * RxDescriptors -Receive Descriptor Count
27 * @Valid Range: PCH_GBE_MIN_RXD - PCH_GBE_MAX_RXD
35 * Speed - User Specified Speed Override
37 * - 0: auto-negotiate at all supported speeds
38 * - 10: only link at 10 Mbps
[all …]
|
| /kernel/linux/linux-6.6/Documentation/usb/ |
| D | ehci.rst | 5 27-Dec-2002
7 The EHCI driver is used to talk to high speed USB 2.0 devices using
8 USB 2.0-capable host controller hardware. The USB 2.0 standard is
11 - "High Speed" 480 Mbit/sec (60 MByte/sec)
12 - "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
13 - "Low Speed" 1.5 Mbit/sec
15 USB 1.1 only addressed full speed and low speed. High speed devices
23 (TT) in the hub, which turns low or full speed transactions into
24 high speed "split transactions" that don't waste transfer bandwidth.
31 While usb-storage devices have been available since mid-2001 (working
[all …]
|
| /kernel/linux/linux-5.10/Documentation/usb/ |
| D | ehci.rst | 5 27-Dec-2002
7 The EHCI driver is used to talk to high speed USB 2.0 devices using
8 USB 2.0-capable host controller hardware. The USB 2.0 standard is
11 - "High Speed" 480 Mbit/sec (60 MByte/sec)
12 - "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
13 - "Low Speed" 1.5 Mbit/sec
15 USB 1.1 only addressed full speed and low speed. High speed devices
23 (TT) in the hub, which turns low or full speed transactions into
24 high speed "split transactions" that don't waste transfer bandwidth.
31 While usb-storage devices have been available since mid-2001 (working
[all …]
|
| /kernel/linux/linux-6.6/Documentation/networking/device_drivers/ethernet/intel/ |
| D | e1000.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999 - 2013 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Speed and Duplex Configuration
16 - Additional Configurations
17 - Support
40 For more information about the AutoNeg, Duplex, and Speed
41 parameters, see the "Speed and Duplex Configuration" section in
50 -------
[all …]
|
| /kernel/linux/linux-5.10/Documentation/networking/device_drivers/ethernet/intel/ |
| D | e1000.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
8 Copyright(c) 1999 - 2013 Intel Corporation.
13 - Identifying Your Adapter
14 - Command Line Parameters
15 - Speed and Duplex Configuration
16 - Additional Configurations
17 - Support
40 For more information about the AutoNeg, Duplex, and Speed
41 parameters, see the "Speed and Duplex Configuration" section in
50 -------
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/ethernet/intel/e1000/ |
| D | e1000_param.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2006 Intel Corporation. */
12 #define OPTION_UNSET -1
30 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
31 * Valid Range: 80-4096 for 82544 and newer
39 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
40 * Valid Range: 80-4096 for 82544 and newer
46 /* User Specified Speed Override
49 * - 0 - auto-negotiate at all supported speeds
50 * - 10 - only link at 10 Mbps
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/ethernet/intel/e1000/ |
| D | e1000_param.c | 1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2006 Intel Corporation. */
12 #define OPTION_UNSET -1
30 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
31 * Valid Range: 80-4096 for 82544 and newer
39 * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
40 * Valid Range: 80-4096 for 82544 and newer
46 /* User Specified Speed Override
49 * - 0 - auto-negotiate at all supported speeds
50 * - 10 - only link at 10 Mbps
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/usb/cx231xx/ |
| D | cx231xx-pcb-cfg.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 cx231xx-pcb-config.c - driver for Conexant
11 #include "cx231xx-conf-reg.h"
23 0, /* speed , not decide yet */
62 /* full-speed config */
94 0, /* speed , not decide yet */
131 /* full-speed */
163 0, /* speed , not decide yet */
201 /* full-speed */
233 0, /* speed , not decide yet */
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/usb/cx231xx/ |
| D | cx231xx-pcb-cfg.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 cx231xx-pcb-config.c - driver for Conexant
11 #include "cx231xx-conf-reg.h"
23 0, /* speed , not decide yet */
62 /* full-speed config */
94 0, /* speed , not decide yet */
131 /* full-speed */
163 0, /* speed , not decide yet */
201 /* full-speed */
233 0, /* speed , not decide yet */
[all …]
|