| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/multiplexer/ |
| D | io-channel-mux.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: I/O channel multiplexer
10 - Peter Rosin <peda@axentia.se>
14 e.g. an ADC channel, these bindings describe that situation.
16 For each non-empty string in the channels property, an io-channel will be
17 created. The number of this io-channel is the same as the index into the list
18 of strings in the channels property, and also matches the mux controller
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/aspeed/ |
| D | aspeed-bmc-ampere-mtmitchell.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
4 /dts-v1/;
6 #include "aspeed-g6.dtsi"
7 #include <dt-bindings/i2c/i2c.h>
8 #include <dt-bindings/gpio/aspeed-gpio.h>
12 compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
20 stdout-path = &uart5;
28 reserved-memory {
29 #address-cells = <1>;
30 #size-cells = <1>;
[all …]
|
| D | aspeed-bmc-ampere-mtjade.dts | 1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
8 compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
12 * i2c bus 50-57 assigned to NVMe slot 0-7
24 * i2c bus 60-67 assigned to NVMe slot 8-15
36 * i2c bus 70-77 assigned to NVMe slot 16-23
48 * i2c bus 80-81 assigned to NVMe M2 slot 0-1
55 stdout-path = &uart5;
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/multiplexer/ |
| D | io-channel-mux.txt | 1 I/O channel multiplexer bindings
4 e.g. an ADC channel, these bindings describe that situation.
7 - compatible : "io-channel-mux"
8 - io-channels : Channel node of the parent channel that has multiplexed
10 - io-channel-names : Should be "parent".
11 - #address-cells = <1>;
12 - #size-cells = <0>;
13 - mux-controls : Mux controller node to use for operating the mux
14 - channels : List of strings, labeling the mux controller states.
16 For each non-empty string in the channels property, an io-channel will
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/microchip/ |
| D | at91-natte.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+
3 * at91-natte.dts - Device Tree include file for the Natte board
11 mux: mux-controller { label
12 compatible = "gpio-mux";
13 #mux-control-cells = <0>;
15 mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
20 batntc-mux {
21 compatible = "io-channel-mux";
22 io-channels = <&adc 5>;
23 io-channel-names = "parent";
[all …]
|
| D | at91-tse850-3.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
9 /dts-v1/;
10 #include <dt-bindings/pwm/pwm.h>
11 #include "at91-linea.dtsi"
14 model = "Axentia TSE-850 3.0";
19 compatible = "fixed-clock";
21 #clock-cells = <0>;
22 clock-frequency = <16000000>;
23 clock-output-names = "sck";
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | at91-natte.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+
3 * at91-natte.dts - Device Tree include file for the Natte board
11 mux: mux-controller { label
12 compatible = "gpio-mux";
13 #mux-control-cells = <0>;
15 mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
20 batntc-mux {
21 compatible = "io-channel-mux";
22 io-channels = <&adc 5>;
23 io-channel-names = "parent";
[all …]
|
| D | at91-tse850-3.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
9 /dts-v1/;
10 #include <dt-bindings/pwm/pwm.h>
11 #include "at91-linea.dtsi"
14 model = "Axentia TSE-850 3.0";
19 compatible = "fixed-clock";
21 #clock-cells = <0>;
22 clock-frequency = <16000000>;
23 clock-output-names = "sck";
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mux/ |
| D | adi,adg792a.txt | 4 - compatible : "adi,adg792a" or "adi,adg792g"
5 - #mux-control-cells : <0> if parallel (the three muxes are bound together
6 with a single mux controller controlling all three muxes), or <1> if
7 not (one mux controller for each mux).
8 * Standard mux-controller bindings as described in mux-controller.txt
11 - gpio-controller : if present, #gpio-cells below is required.
12 - #gpio-cells : should be <2>
13 - First cell is the GPO line number, i.e. 0 or 1
14 - Second cell is used to specify active high (0)
18 - idle-state : if present, array of states that the mux controllers will have
[all …]
|
| D | mux-controller.txt | 4 A multiplexer (or mux) controller will have one, or several, consumer devices
5 that uses the mux controller. Thus, a mux controller can possibly control
7 multiplexer needed by each consumer, but a single mux controller can of course
10 A mux controller provides a number of states to its consumers, and the state
11 space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
12 0-7 for an 8-way multiplexer, etc.
16 ---------
18 Mux controller consumers should specify a list of mux controllers that they
19 want to use with a property containing a 'mux-ctrl-list':
21 mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
[all …]
|
| D | adi,adgs1408.txt | 1 Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
4 - compatible : Should be one of
7 * Standard mux-controller bindings as described in mux-controller.txt
10 - gpio-controller : if present, #gpio-cells is required.
11 - #gpio-cells : should be <2>
12 - First cell is the GPO line number, i.e. 0 to 3
14 - Second cell is used to specify active high (0)
18 - idle-state : if present, the state that the mux controller will have
28 * One mux controller.
29 * Mux state set to idle as is (no idle-state declared)
[all …]
|
| D | gpio-mux.txt | 1 GPIO-based multiplexer controller bindings
7 - compatible : "gpio-mux"
8 - mux-gpios : list of gpios used to control the multiplexer, least
10 - #mux-control-cells : <0>
11 * Standard mux-controller bindings as decribed in mux-controller.txt
14 - idle-state : if present, the state the mux will have when idle. The
23 mux: mux-controller {
24 compatible = "gpio-mux";
25 #mux-control-cells = <0>;
27 mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mux/ |
| D | adi,adg792a.txt | 4 - compatible : "adi,adg792a" or "adi,adg792g"
5 - #mux-control-cells : <0> if parallel (the three muxes are bound together
6 with a single mux controller controlling all three muxes), or <1> if
7 not (one mux controller for each mux).
8 * Standard mux-controller bindings as described in mux-controller.yaml
11 - gpio-controller : if present, #gpio-cells below is required.
12 - #gpio-cells : should be <2>
13 - First cell is the GPO line number, i.e. 0 or 1
14 - Second cell is used to specify active high (0)
18 - idle-state : if present, array of states that the mux controllers will have
[all …]
|
| D | mux-controller.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mux/mux-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Peter Rosin <peda@axentia.se>
13 A multiplexer (or mux) controller will have one, or several, consumer devices
14 that uses the mux controller. Thus, a mux controller can possibly control
16 multiplexer needed by each consumer, but a single mux controller can of course
19 A mux controller provides a number of states to its consumers, and the state
20 space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
[all …]
|
| D | adi,adgs1408.txt | 1 Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
4 - compatible : Should be one of
7 * Standard mux-controller bindings as described in mux-controller.yaml
10 - gpio-controller : if present, #gpio-cells is required.
11 - #gpio-cells : should be <2>
12 - First cell is the GPO line number, i.e. 0 to 3
14 - Second cell is used to specify active high (0)
18 - idle-state : if present, the state that the mux controller will have
28 * One mux controller.
29 * Mux state set to idle as is (no idle-state declared)
[all …]
|
| D | gpio-mux.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: GPIO-based multiplexer controller
10 - Peter Rosin <peda@axentia.se>
22 const: gpio-mux
24 mux-gpios:
28 '#mux-control-cells':
31 '#mux-state-cells':
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/xilinx/ |
| D | zynqmp-zcu106-revA.dts | 1 // SPDX-License-Identifier: GPL-2.0+
5 * (C) Copyright 2016 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
11 /dts-v1/;
14 #include "zynqmp-clk-ccf.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18 #include <dt-bindings/phy/phy.h>
22 compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
[all …]
|
| D | zynqmp-zcu102-revA.dts | 1 // SPDX-License-Identifier: GPL-2.0+
5 * (C) Copyright 2015 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
11 /dts-v1/;
14 #include "zynqmp-clk-ccf.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18 #include <dt-bindings/phy/phy.h>
22 compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
[all …]
|
| D | zynqmp-zcu111-revA.dts | 1 // SPDX-License-Identifier: GPL-2.0+
5 * (C) Copyright 2017 - 2022, Xilinx, Inc.
6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
11 /dts-v1/;
14 #include "zynqmp-clk-ccf.dtsi"
15 #include <dt-bindings/input/input.h>
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
18 #include <dt-bindings/phy/phy.h>
22 compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
[all …]
|
| /kernel/linux/linux-6.6/drivers/i2c/muxes/ |
| D | i2c-mux-mlxcpld.c | 1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
3 * Mellanox i2c mux driver
5 * Copyright (C) 2016-2020 Mellanox Technologies
10 #include <linux/i2c-mux.h>
11 #include <linux/io.h>
18 /* mlxcpld_mux - mux control structure:
19 * @last_val - last selected register value or -1 if mux deselected
20 * @client - I2C device client
29 /* MUX logic description.
30 * Driver can support different mux control logic, according to CPLD
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/rockchip/ |
| D | rk3326-odroid-go3.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi"
12 model = "ODROID-GO Super";
13 compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
15 joystick_mux_controller: mux-controller {
16 compatible = "gpio-mux";
18 #mux-control-cells = <0>;
20 mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
24 joystick_mux: adc-mux {
[all …]
|
| /kernel/linux/linux-5.10/drivers/i2c/muxes/ |
| D | i2c-mux-mlxcpld.c | 2 * drivers/i2c/muxes/i2c-mux-mlxcpld.c
37 #include <linux/i2c-mux.h>
38 #include <linux/io.h>
47 /* mlxcpld_mux - mux control structure:
48 * @last_chan - last register value
49 * @client - I2C device client
56 /* MUX logic description.
57 * Driver can support different mux control logic, according to CPLD
62 * i2c-mlxcpld Digital Analog
64 * *--------* * -> mux1 (virt bus2) -> mux -> |
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,pm8xxx-xoadc.txt | 8 - compatible: should be one of:
9 "qcom,pm8018-adc"
10 "qcom,pm8038-adc"
11 "qcom,pm8058-adc"
12 "qcom,pm8921-adc"
14 - reg: should contain the ADC base address in the PMIC, typically
17 - xoadc-ref-supply: should reference a regulator that can supply
21 The following required properties are standard for IO channels, see
22 iio-bindings.txt for more details, but notice that this particular
24 identifying each ADC channel:
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/adc/ |
| D | qcom,pm8018-adc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/iio/adc/qcom,pm8018-adc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Linus Walleij <linus.walleij@linaro.org>
19 - qcom,pm8018-adc
20 - qcom,pm8038-adc
21 - qcom,pm8058-adc
22 - qcom,pm8921-adc
29 xoadc-ref-supply:
[all …]
|
| /kernel/linux/linux-6.6/drivers/iio/multiplexer/ |
| D | iio-mux.c | 1 // SPDX-License-Identifier: GPL-2.0
16 #include <linux/mux/consumer.h>
29 struct mux { struct
40 static int iio_mux_select(struct mux *mux, int idx) in iio_mux_select() argument
42 struct mux_child *child = &mux->child[idx]; in iio_mux_select()
43 struct iio_chan_spec const *chan = &mux->chan[idx]; in iio_mux_select()
47 ret = mux_control_select_delay(mux->control, chan->channel, in iio_mux_select()
48 mux->delay_us); in iio_mux_select()
50 mux->cached_state = -1; in iio_mux_select()
54 if (mux->cached_state == chan->channel) in iio_mux_select()
[all …]
|