| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/phy/ |
| D | nvidia,tegra124-xusb-padctl.txt | 11 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
12 super-speed USB. Other lanes are for various types of low-speed, full-speed
13 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
14 contains a software-configurable mux that sits between the I/O controller
15 ports (e.g. PCIe) and the lanes.
17 In addition to per-lane configuration, USB 3.0 ports may require additional
18 settings on a per-board basis.
20 Pads will be represented as children of the top-level XUSB pad controller
23 PHY bindings, as described by the phy-bindings.txt file in this directory.
29 abstraction of the signals that are routed to a USB receptacle (i.e. a PHY
[all …]
|
| D | rcar-gen3-phy-pcie.txt | 1 * Renesas R-Car generation 3 PCIe PHY
3 This file provides information on what the device node for the R-Car
4 generation 3 PCIe PHY contains.
7 - compatible: "renesas,r8a77980-pcie-phy" if the device is a part of the
9 - reg: offset and length of the register block.
10 - clocks: clock phandle and specifier pair.
11 - power-domains: power domain phandle and specifier pair.
12 - resets: reset phandle and specifier pair.
13 - #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
15 Example (R-Car V3H):
[all …]
|
| D | phy-miphy365x.txt | 1 STMicroelectronics STi MIPHY365x PHY binding
4 This binding describes a miphy device that is used to control PHY hardware
5 for SATA and PCIe.
8 - compatible : Should be "st,miphy365x-phy"
9 - st,syscfg : Phandle / integer array property. Phandle of sysconfig group
11 an entry for each port sub-node, specifying the control
14 Required nodes : A sub-node is required for each channel the controller
16 'reg' and 'reg-names' properties are used inside these
21 - #phy-cells : Should be 1 (See second example)
23 - PHY_TYPE_SATA
[all …]
|
| D | qcom,qmp-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
5 $id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
6 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
8 title: Qualcomm QMP PHY controller
11 - Manu Gautam <mgautam@codeaurora.org>
14 QMP phy controller supports physical layer functionality for a number of
15 controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
20 - qcom,ipq8074-qmp-pcie-phy
21 - qcom,ipq8074-qmp-usb3-phy
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pci/ |
| D | rockchip-pcie-host.txt | 1 * Rockchip AXI PCIe Root Port Bridge DT description
4 - #address-cells: Address representation for root ports, set to <3>
5 - #size-cells: Size representation for root ports, set to <2>
6 - #interrupt-cells: specifies the number of cells needed to encode an
8 - compatible: Should contain "rockchip,rk3399-pcie"
9 - reg: Two register ranges as listed in the reg-names property
10 - reg-names: Must include the following names
11 - "axi-base"
12 - "apb-base"
13 - clocks: Must contain an entry for each entry in clock-names.
[all …]
|
| D | rockchip-pcie-ep.txt | 1 * Rockchip AXI PCIe Endpoint Controller DT description
4 - compatible: Should contain "rockchip,rk3399-pcie-ep"
5 - reg: Two register ranges as listed in the reg-names property
6 - reg-names: Must include the following names
7 - "apb-base"
8 - "mem-base"
9 - clocks: Must contain an entry for each entry in clock-names.
10 See ../clocks/clock-bindings.txt for details.
11 - clock-names: Must include the following entries:
12 - "aclk"
[all …]
|
| D | qcom,pcie.txt | 3 - compatible:
7 - "qcom,pcie-ipq8064" for ipq8064
8 - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
9 - "qcom,pcie-apq8064" for apq8064
10 - "qcom,pcie-apq8084" for apq8084
11 - "qcom,pcie-msm8996" for msm8996 or apq8096
12 - "qcom,pcie-ipq4019" for ipq4019
13 - "qcom,pcie-ipq8074" for ipq8074
14 - "qcom,pcie-qcs404" for qcs404
15 - "qcom,pcie-sdm845" for sdm845
[all …]
|
| D | fsl,imx6q-pcie.txt | 1 * Freescale i.MX6 PCIe interface
3 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
4 and thus inherits all the common properties defined in designware-pcie.txt.
7 - compatible:
8 - "fsl,imx6q-pcie"
9 - "fsl,imx6sx-pcie",
10 - "fsl,imx6qp-pcie"
11 - "fsl,imx7d-pcie"
12 - "fsl,imx8mq-pcie"
13 - reg: base address and length of the PCIe controller
[all …]
|
| D | brcm,iproc-pcie.txt | 1 * Broadcom iProc PCIe controller with the platform bus interface
4 - compatible:
5 "brcm,iproc-pcie" for the first generation of PAXB based controller,
7 "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
9 "brcm,iproc-pcie-paxc" for the first generation of PAXC based
11 "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
13 PAXB-based root complex is used for external endpoint devices. PAXC-based
15 - reg: base address and length of the PCIe controller I/O register space
16 - #interrupt-cells: set to <1>
17 - interrupt-map-mask and interrupt-map, standard PCI properties to define the
[all …]
|
| D | mediatek-pcie.txt | 1 MediaTek Gen2 PCIe controller
4 - compatible: Should contain one of the following strings:
5 "mediatek,mt2701-pcie"
6 "mediatek,mt2712-pcie"
7 "mediatek,mt7622-pcie"
8 "mediatek,mt7623-pcie"
9 "mediatek,mt7629-pcie"
10 - device_type: Must be "pci"
11 - reg: Base addresses and lengths of the PCIe subsys and root ports.
12 - reg-names: Names of the above areas to use during resource lookup.
[all …]
|
| D | samsung,exynos5440-pcie.txt | 1 * Samsung Exynos 5440 PCIe interface
3 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
4 and thus inherits all the common properties defined in designware-pcie.txt.
7 - compatible: "samsung,exynos5440-pcie"
8 - reg: base addresses and lengths of the PCIe controller,
9 - reg-names : First name should be set to "elbi".
12 NOTE: When using the "config" property, reg-names must be set.
13 - interrupts: A list of interrupt outputs for level interrupt,
15 - phys: From PHY binding. Phandle for the generic PHY.
16 Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
[all …]
|
| /kernel/linux/linux-5.10/drivers/phy/broadcom/ |
| D | phy-bcm-sr-pcie.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2016-2018 Broadcom
12 #include <linux/phy/phy.h>
18 #define SR_PAXC_PHY_IDX (SR_NR_PCIE_PHYS - 1)
40 * struct sr_pcie_phy - Stingray PCIe PHY
42 * @core: pointer to the Stingray PCIe PHY core control
43 * @index: PHY index
44 * @phy: pointer to the kernel PHY device
49 struct phy *phy; member
53 * struct sr_pcie_phy_core - Stingray PCIe PHY core control
[all …]
|
| /kernel/linux/linux-6.6/drivers/phy/broadcom/ |
| D | phy-bcm-sr-pcie.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2016-2018 Broadcom
12 #include <linux/phy/phy.h>
18 #define SR_PAXC_PHY_IDX (SR_NR_PCIE_PHYS - 1)
40 * struct sr_pcie_phy - Stingray PCIe PHY
42 * @core: pointer to the Stingray PCIe PHY core control
43 * @index: PHY index
44 * @phy: pointer to the kernel PHY device
49 struct phy *phy; member
53 * struct sr_pcie_phy_core - Stingray PCIe PHY core control
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/phy/ |
| D | nvidia,tegra210-xusb-padctl.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
[all …]
|
| D | phy-miphy365x.txt | 1 STMicroelectronics STi MIPHY365x PHY binding
4 This binding describes a miphy device that is used to control PHY hardware
5 for SATA and PCIe.
8 - compatible : Should be "st,miphy365x-phy"
9 - st,syscfg : Phandle / integer array property. Phandle of sysconfig group
11 an entry for each port sub-node, specifying the control
14 Required nodes : A sub-node is required for each channel the controller
16 'reg' and 'reg-names' properties are used inside these
21 - #phy-cells : Should be 1 (See second example)
23 - PHY_TYPE_SATA
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pci/ |
| D | brcm,iproc-pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Broadcom iProc PCIe controller with the platform bus interface
10 - Ray Jui <ray.jui@broadcom.com>
11 - Scott Branden <scott.branden@broadcom.com>
14 - $ref: /schemas/pci/pci-bus.yaml#
19 - enum:
22 - brcm,iproc-pcie
[all …]
|
| D | fsl,imx6q-pcie-common.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale i.MX6 PCIe RC/EP controller
10 - Lucas Stach <l.stach@pengutronix.de>
11 - Richard Zhu <hongxing.zhu@nxp.com>
14 Generic Freescale i.MX PCIe Root Port and Endpoint controller
19 minItems: 3
22 clock-names:
[all …]
|
| D | mediatek,mt7621-pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: MediaTek MT7621 PCIe controller
10 - Sergio Paracuellos <sergio.paracuellos@gmail.com>
13 MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
14 with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
17 - $ref: /schemas/pci/pci-bus.yaml#
21 const: mediatek,mt7621-pci
[all …]
|
| D | mediatek-pcie-gen3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Gen3 PCIe controller on MediaTek SoCs
10 - Jianjun Wang <jianjun.wang@mediatek.com>
13 PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
16 This PCIe controller supports up to 256 MSI vectors, the MSI hardware
19 +-----+
21 +-----+
[all …]
|
| D | mediatek-pcie.txt | 1 MediaTek Gen2 PCIe controller
4 - compatible: Should contain one of the following strings:
5 "mediatek,mt2701-pcie"
6 "mediatek,mt2712-pcie"
7 "mediatek,mt7622-pcie"
8 "mediatek,mt7623-pcie"
9 "mediatek,mt7629-pcie"
10 "airoha,en7523-pcie"
11 - device_type: Must be "pci"
12 - reg: Base addresses and lengths of the root ports.
[all …]
|
| D | socionext,uniphier-pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Socionext UniPhier PCIe host controller
10 UniPhier PCIe host controller is based on the Synopsys DesignWare
11 PCI core. It shares common features with the PCIe DesignWare core and
13 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
16 - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
19 - $ref: /schemas/pci/snps,dw-pcie.yaml#
[all …]
|
| D | qcom,pcie.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
14 Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
15 PCIe IP.
20 - enum:
21 - qcom,pcie-apq8064
[all …]
|
| /kernel/linux/linux-6.6/drivers/pci/controller/dwc/ |
| D | pcie-uniphier.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * PCIe host controller driver for UniPhier SoCs
19 #include <linux/phy/phy.h>
23 #include "pcie-designware.h"
30 #define PCL_PERST_NOE_REGVAL BIT(3)
49 #define PCL_CFG_LINK_AUTO_BW_STATUS BIT(3)
57 #define PCL_RCV_INTX_ALL_STATUS GENMASK(3, 0)
69 struct phy *phy; member
73 #define to_uniphier_pcie(x) dev_get_drvdata((x)->dev)
75 static void uniphier_pcie_ltssm_enable(struct uniphier_pcie *pcie, in uniphier_pcie_ltssm_enable() argument
[all …]
|
| D | pcie-intel-gw.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * PCIe host controller driver for Intel Gateway SoCs
14 #include <linux/phy/phy.h>
20 #include "pcie-designware.h"
22 #define PORT_AFR_N_FTS_GEN12_DFT (SZ_128 - 1)
26 /* PCIe Application logic Registers */
70 struct phy *phy; member
84 static inline void pcie_app_wr(struct intel_pcie *pcie, u32 ofs, u32 val) in pcie_app_wr() argument
86 writel(val, pcie->app_base + ofs); in pcie_app_wr()
89 static void pcie_app_wr_mask(struct intel_pcie *pcie, u32 ofs, in pcie_app_wr_mask() argument
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/st/ |
| D | spear1310.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later
15 compatible = "st,spear-spics-gpio";
17 st-spics,peripcfg-reg = <0x3b0>;
18 st-spics,sw-enable-bit = <12>;
19 st-spics,cs-value-bit = <11>;
20 st-spics,cs-enable-mask = <3>;
21 st-spics,cs-enable-shift = <8>;
22 gpio-controller;
23 #gpio-cells = <2>;
27 compatible = "st,spear1310-miphy";
[all …]
|