| /kernel/linux/linux-6.6/Documentation/ABI/testing/ |
| D | sysfs-module | 1 What: /sys/module/pch_phub/drivers/.../pch_mac
4 Contact: masa-korg@dsn.okisemi.com
7 What: /sys/module/pch_phub/drivers/.../pch_firmware
10 Contact: masa-korg@dsn.okisemi.com
14 What: /sys/module/ehci_hcd/drivers/.../uframe_periodic_max
18 Description: Maximum time allowed for periodic transfers per microframe (μs)
21 USB 2.0 sets maximum allowed time for periodic transfers per
27 microseconds of isochronous bandwidth per microframe to work
32 microseconds of periodic bandwidth per microframe.
34 Beware, non-standard modes are usually not thoroughly tested by
[all …]
|
| /kernel/linux/linux-5.10/Documentation/ABI/testing/ |
| D | sysfs-module | 1 What: /sys/module/pch_phub/drivers/.../pch_mac
4 Contact: masa-korg@dsn.okisemi.com
7 What: /sys/module/pch_phub/drivers/.../pch_firmware
10 Contact: masa-korg@dsn.okisemi.com
14 What: /sys/module/ehci_hcd/drivers/.../uframe_periodic_max
18 Description: Maximum time allowed for periodic transfers per microframe (μs)
21 USB 2.0 sets maximum allowed time for periodic transfers per
27 microseconds of isochronous bandwidth per microframe to work
32 microseconds of periodic bandwidth per microframe.
34 Beware, non-standard modes are usually not thoroughly tested by
[all …]
|
| /kernel/linux/linux-6.6/Documentation/virt/ |
| D | guest-halt-polling.rst | 15 2) The VM-exit cost can be avoided.
25 ("per-cpu guest_halt_poll_ns"), which is adjusted by the algorithm
28 Module Parameters
31 The haltpoll governor has 5 tunable module parameters:
42 Division factor used to shrink per-cpu guest_halt_poll_ns when
49 Multiplication factor used to grow per-cpu guest_halt_poll_ns
50 when event occurs after per-cpu guest_halt_poll_ns
57 The per-cpu guest_halt_poll_ns eventually reaches zero
59 per-cpu guest_halt_poll_ns when growing. This can
70 to avoid it (per-cpu guest_halt_poll_ns will remain
[all …]
|
| /kernel/linux/linux-5.10/Documentation/virt/ |
| D | guest-halt-polling.rst | 15 2) The VM-exit cost can be avoided.
25 ("per-cpu guest_halt_poll_ns"), which is adjusted by the algorithm
28 Module Parameters
31 The haltpoll governor has 5 tunable module parameters:
42 Division factor used to shrink per-cpu guest_halt_poll_ns when
49 Multiplication factor used to grow per-cpu guest_halt_poll_ns
50 when event occurs after per-cpu guest_halt_poll_ns
57 The per-cpu guest_halt_poll_ns eventually reaches zero
59 per-cpu guest_halt_poll_ns when growing. This can
70 to avoid it (per-cpu guest_halt_poll_ns will remain
[all …]
|
| /kernel/linux/linux-6.6/include/uapi/sound/ |
| D | snd_sst_tokens.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
3 * snd_sst_tokens.h - Intel SST tokens definition
12 * %SKL_TKN_UUID: Module UUID
34 * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take
40 * %SKL_TKN_U8_MOD_TYPE: Module type value.
42 * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE,
48 * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is
60 * module is connected
69 * %SKL_TKN_U32_MAX_MCPS: Module max mcps value
71 * %SKL_TKN_U32_MEM_PAGES: Module resource pages
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-omap2/ |
| D | cm_common.c | 1 // SPDX-License-Identifier: GPL-2.0-only
25 * cm_ll_data: function pointers to SoC-specific implementations of
41 * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
54 * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
61 * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error,
69 if (!cm_ll_data->split_idlest_reg) { in cm_split_idlest_reg()
70 WARN_ONCE(1, "cm: %s: no low-level function defined\n", in cm_split_idlest_reg()
72 return -EINVAL; in cm_split_idlest_reg()
75 ret = cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, in cm_split_idlest_reg()
77 *prcm_inst -= cm_base.offset; in cm_split_idlest_reg()
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-omap2/ |
| D | cm_common.c | 1 // SPDX-License-Identifier: GPL-2.0-only
25 * cm_ll_data: function pointers to SoC-specific implementations of
41 * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
48 * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error,
56 if (!cm_ll_data->split_idlest_reg) { in cm_split_idlest_reg()
57 WARN_ONCE(1, "cm: %s: no low-level function defined\n", in cm_split_idlest_reg()
59 return -EINVAL; in cm_split_idlest_reg()
62 ret = cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst, in cm_split_idlest_reg()
64 *prcm_inst -= cm_base.offset; in cm_split_idlest_reg()
69 * omap_cm_wait_module_ready - wait for a module to leave idle or standby
[all …]
|
| /kernel/linux/linux-6.6/tools/perf/pmu-events/arch/x86/goldmontplus/ |
| D | cache.json | 18 "BriefDescription": "Cycles code-fetch stalled due to an outstanding ICache miss.",
29 …from the intra-die interconnect (IDI) fabric. The XQ may reject transactions from the L2Q (non-cac…
59 …"BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise ev…
159 "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)",
169 "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)",
179 "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)",
216 …nd & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding i…
221 …nd & prefetch) miss the L2 cache with a snoop hit in the other processor module, data forwarding i…
226 …s (demand & prefetch) true miss for the L2 cache with a snoop miss in the other processor module.",
231 …tch) true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFF…
[all …]
|
| /kernel/linux/linux-5.10/include/uapi/sound/ |
| D | snd_sst_tokens.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
3 * snd_sst_tokens.h - Intel SST tokens definition
22 * %SKL_TKN_UUID: Module UUID
44 * %SKL_TKN_U8_CORE_ID: Stores module affinity value.Can take
50 * %SKL_TKN_U8_MOD_TYPE: Module type value.
52 * %SKL_TKN_U8_CONN_TYPE: Module connection type can be a FE,
58 * %SKL_TKN_U8_DEV_TYPE: Type of device to which the module is
70 * module is connected
79 * %SKL_TKN_U32_MAX_MCPS: Module max mcps value
81 * %SKL_TKN_U32_MEM_PAGES: Module resource pages
[all …]
|
| /kernel/linux/linux-6.6/drivers/crypto/allwinner/ |
| D | Kconfig | 24 To compile this driver as a module, choose M here: the module
25 will be called sun4i-ss.
32 Select this option if you want to provide kernel-side support for
33 the Pseudo-Random Number Generator found in the Security System.
36 bool "Enable sun4i-ss stats"
40 Say y to enable sun4i-ss debug stats.
41 This will create /sys/kernel/debug/sun4i-ss/stats for displaying
42 the number of requests per algorithm.
59 To compile this driver as a module, choose M here: the module
60 will be called sun8i-ce.
[all …]
|
| /kernel/linux/linux-5.10/drivers/crypto/allwinner/ |
| D | Kconfig | 24 To compile this driver as a module, choose M here: the module
25 will be called sun4i-ss.
32 Select this option if you want to provide kernel-side support for
33 the Pseudo-Random Number Generator found in the Security System.
50 To compile this driver as a module, choose M here: the module
51 will be called sun8i-ce.
54 bool "Enable sun8i-ce stats"
58 Say y to enable sun8i-ce debug stats.
59 This will create /sys/kernel/debug/sun8i-ce/stats for displaying
60 the number of requests per flow and per algorithm.
[all …]
|
| /kernel/linux/linux-5.10/tools/perf/pmu-events/arch/x86/goldmontplus/ |
| D | cache.json | 28 …from the intra-die interconnect (IDI) fabric. The XQ may reject transactions from the L2Q (non-cac…
72 "BriefDescription": "Cycles code-fetch stalled due to an outstanding ICache miss."
108 "BriefDescription": "Load uops retired that split a cache-line (Precise event capable)",
121 "BriefDescription": "Stores uops retired that split a cache-line (Precise event capable)",
134 "BriefDescription": "Memory uops retired that split a cache-line (Precise event capable)",
238 …"BriefDescription": "Memory uop retired where cross core or cross module HITM occurred (Precise ev…
299 …ines true miss for the L2 cache with a snoop miss in the other processor module. Requires MSR_OFF…
309 …s of full cache lines true miss for the L2 cache with a snoop miss in the other processor module.",
314 …ll cache lines miss the L2 cache with a snoop hit in the other processor module, data forwarding i…
324 …ll cache lines miss the L2 cache with a snoop hit in the other processor module, data forwarding i…
[all …]
|
| /kernel/linux/linux-5.10/drivers/usb/usbip/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
16 To compile this as a module, choose M here: the module will
17 be called usbip-core.
28 To compile this driver as a module, choose M here: the
29 module will be called vhci-hcd.
32 int "Number of ports per USB/IP virtual host controller"
38 host controller driver, this defines number of ports per
59 To compile this driver as a module, choose M here: the
60 module will be called usbip-host.
70 To compile this driver as a module, choose M here: the
[all …]
|
| /kernel/linux/linux-6.6/drivers/usb/usbip/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
16 To compile this as a module, choose M here: the module will
17 be called usbip-core.
28 To compile this driver as a module, choose M here: the
29 module will be called vhci-hcd.
32 int "Number of ports per USB/IP virtual host controller"
38 host controller driver, this defines number of ports per
59 To compile this driver as a module, choose M here: the
60 module will be called usbip-host.
70 To compile this driver as a module, choose M here: the
[all …]
|
| /kernel/linux/linux-5.10/drivers/mmc/core/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
10 This selects Hardware reset support aka pwrseq-emmc for eMMC
13 This driver can also be built as a module. If so, the module
17 tristate "HW reset support for SD8787 BT + Wifi module"
21 module. By default this option is set to n.
23 This driver can also be built as a module. If so, the module
31 This selects simple hardware reset support aka pwrseq-simple for MMC
34 This driver can also be built as a module. If so, the module
48 int "Number of minors per block device"
53 Number of minors per block device. One is needed for every
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/panel/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39 24 bit RGB per pixel. It provides a MIPI DSI interface to
40 the host and has a built-in LED backlight.
57 This driver supports LVDS panels that don't require device-specific
79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
89 4-lane 800x1280 MIPI DSI panel.
92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
98 Feiyang FY07024DI26A30-D MIPI-DSI interface.
106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/bus/ |
| D | arm,integrator-ap-lm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Integrator/AP Logic Module extension bus
10 - Linus Walleij <linusw@kernel.org>
15 determine if a logic module is connected at index 0, 1, 2 or 3. The logic
16 module connector is described in this binding. The logic modules per se
17 then have their own specific per-module bindings and they will be described
18 as subnodes under this logic module extension bus.
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/bus/ |
| D | arm,integrator-ap-lm.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Integrator/AP Logic Module extension bus
10 - Linus Walleij <linusw@kernel.org>
15 determine if a logic module is connected at index 0, 1, 2 or 3. The logic
16 module connector is described in this binding. The logic modules per se
17 then have their own specific per-module bindings and they will be described
18 as subnodes under this logic module extension bus.
[all …]
|
| /kernel/linux/linux-5.10/include/drm/ |
| D | i915_mei_hdcp_interface.h | 1 /* SPDX-License-Identifier: (GPL-2.0+) */
3 * Copyright © 2017-2019 Intel Corporation
17 * enum hdcp_port_type - HDCP port implementation type defined by ME FW
19 * @HDCP_PORT_TYPE_INTEGRATED: In-Host HDCP2.x port
33 * enum hdcp_wired_protocol - HDCP adaptation used on the port
57 * enum mei_fw_tc - ME Firmware defined index for transcoders
79 * struct hdcp_port_data - intel specific HDCP port data
80 * @fw_ddi: ddi index as per ME FW
81 * @fw_tc: transcoder index as per ME FW
82 * @port_type: HDCP port type as per ME FW classification
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/timer/ |
| D | nxp,tpm-timer.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
10 - Dong Aisheng <aisheng.dong@nxp.com>
13 The Timer/PWM Module (TPM) supports input capture, output compare,
22 const: fsl,imx7ulp-tpm
32 - description: SoC TPM ipg clock
33 - description: SoC TPM per clock
[all …]
|
| /kernel/linux/linux-6.6/Documentation/virt/kvm/ |
| D | halt-polling.rst | 1 .. SPDX-License-Identifier: GPL-2.0
16 the order of a few micro-seconds, although performance benefits are workload
27 The powerpc kvm-hv specific case is implemented in:
39 kvm_vcpu->halt_poll_ns
41 or in the case of powerpc kvm-hv, in the vcore struct:
43 kvmppc_vcore->halt_poll_ns
45 Thus this is a per vcpu (or vcore) value.
51 the global max polling interval (see module params below), or the total block
59 is multiplied by the module parameters halt_poll_ns_grow and
66 shrink_halt_poll_ns() and is divided by the module parameter
[all …]
|
| /kernel/linux/linux-6.6/drivers/mmc/core/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
10 This selects Hardware reset support aka pwrseq-emmc for eMMC
13 This driver can also be built as a module. If so, the module
17 tristate "HW reset support for SD8787 BT + Wifi module"
21 module. By default this option is set to n.
23 This driver can also be built as a module. If so, the module
31 This selects simple hardware reset support aka pwrseq-simple for MMC
34 This driver can also be built as a module. If so, the module
49 int "Number of minors per block device"
54 Number of minors per block device. One is needed for every
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/timer/ |
| D | nxp,tpm-timer.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
10 - Dong Aisheng <aisheng.dong@nxp.com>
13 The Timer/PWM Module (TPM) supports input capture, output compare,
23 - const: fsl,imx7ulp-tpm
24 - items:
25 - const: fsl,imx8ulp-tpm
[all …]
|
| /kernel/linux/linux-6.6/Documentation/admin-guide/mm/damon/ |
| D | reclaim.rst | 1 .. SPDX-License-Identifier: GPL-2.0
4 DAMON-based Reclamation
7 DAMON-based Reclamation (DAMON_RECLAIM) is a static kernel module that aimed to
9 It doesn't aim to replace the LRU-list based page_granularity reclamation, but
15 On general memory over-committed systems, proactively reclaiming cold pages
20 Free Pages Reporting [3]_ based memory over-commit virtualization systems are
24 guests could be not so memory-frugal, mainly because some kernel subsystems and
25 user-space applications are designed to use as much memory as available. Then,
40 Interface: Module Parameters
47 DAMON_RECLAIM utilizes module parameters. That is, you can put
[all …]
|
| /kernel/linux/linux-6.6/drivers/gpu/drm/panel/ |
| D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
46 as found in the YLM RS-97 handheld gaming console.
49 tristate "Boe BF060Y8M-AJ0 panel"
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
[all …]
|