| /kernel/linux/linux-5.10/arch/arm/mach-pxa/include/mach/ |
| D | regs-uart.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
11 #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
13 #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
14 #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
16 #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
17 #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
18 #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
19 #define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
20 #define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
21 #define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
[all …]
|
| /kernel/linux/linux-6.6/Documentation/filesystems/spufs/ |
| D | spufs.rst | 1 .. SPDX-License-Identifier: GPL-2.0
10 spufs - the SPU file system
26 logical SPU. Users can change permissions on those files, but not actu-
43 The files in spufs mostly follow the standard behavior for regular sys-
44 tem calls like read(2) or write(2), but often support only a subset of
49 All files that support the read(2) operation also support readv(2) and
55 All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera-
57 possible operations, e.g. read access on the wbox file.
68 read(2), pread(2), write(2), pwrite(2), lseek(2)
81 The first SPU to CPU communication mailbox. This file is read-only and
[all …]
|
| /kernel/linux/linux-5.10/Documentation/filesystems/spufs/ |
| D | spufs.rst | 1 .. SPDX-License-Identifier: GPL-2.0
10 spufs - the SPU file system
26 logical SPU. Users can change permissions on those files, but not actu-
43 The files in spufs mostly follow the standard behavior for regular sys-
44 tem calls like read(2) or write(2), but often support only a subset of
49 All files that support the read(2) operation also support readv(2) and
55 All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera-
57 possible operations, e.g. read access on the wbox file.
68 read(2), pread(2), write(2), pwrite(2), lseek(2)
81 The first SPU to CPU communication mailbox. This file is read-only and
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-sa1100/include/mach/ |
| D | SA-1100.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
3 * FILE SA-1100.h
9 * System StrongARM SA-1100
12 * SA-1100 microprocessor (Advanced RISC Machine (ARM)
14 * StrongARM SA-1100 data sheet version 2.2.
21 #error You must include hardware.h not SA-1100.h
52 #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
53 #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
54 #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
55 #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-sa1100/include/mach/ |
| D | SA-1100.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
3 * FILE SA-1100.h
9 * System StrongARM SA-1100
12 * SA-1100 microprocessor (Advanced RISC Machine (ARM)
14 * StrongARM SA-1100 data sheet version 2.2.
21 #error You must include hardware.h not SA-1100.h
52 #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
53 #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
54 #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
55 #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/comedi/drivers/ |
| D | pcl730.c | 1 // SPDX-License-Identifier: GPL-2.0
4 * Driver for Advantech PCL-730 and clones
10 * Description: Advantech PCL-730 (& compatibles)
11 * Devices: [Advantech] PCL-730 (pcl730), PCM-3730 (pcm3730), PCL-725 (pcl725),
12 * PCL-733 (pcl733), PCL-734 (pcl734),
13 * [ADLink] ACL-7130 (acl7130), ACL-7225b (acl7225b),
14 * [ICP] ISO-730 (iso730), P8R8-DIO (p8r8dio), P16R16-DIO (p16r16dio),
15 * [Diamond Systems] OPMM-1616-XT (opmm-1616-xt), PEARL-MM-P (pearl-mm-p),
16 * IR104-PBF (ir104-pbf),
21 * [0] - I/O port base
[all …]
|
| /kernel/linux/linux-6.6/drivers/comedi/drivers/ |
| D | pcl730.c | 1 // SPDX-License-Identifier: GPL-2.0
4 * Driver for Advantech PCL-730 and clones
10 * Description: Advantech PCL-730 (& compatibles)
11 * Devices: [Advantech] PCL-730 (pcl730), PCM-3730 (pcm3730), PCL-725 (pcl725),
12 * PCL-733 (pcl733), PCL-734 (pcl734),
13 * [ADLink] ACL-7130 (acl7130), ACL-7225b (acl7225b),
14 * [ICP] ISO-730 (iso730), P8R8-DIO (p8r8dio), P16R16-DIO (p16r16dio),
15 * [Diamond Systems] OPMM-1616-XT (opmm-1616-xt), PEARL-MM-P (pearl-mm-p),
16 * IR104-PBF (ir104-pbf),
21 * [0] - I/O port base
[all …]
|
| /kernel/linux/linux-5.10/include/linux/mtd/ |
| D | spi-nor.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
12 #include <linux/spi/spi-mem.h>
19 * requires a 4-byte (32-bit) address.
25 #define SPINOR_OP_RDSR 0x05 /* Read status register */
26 #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */
27 #define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */
29 #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */
30 #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
31 #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */
32 #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
[all …]
|
| /kernel/linux/linux-6.6/include/linux/mtd/ |
| D | spi-nor.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
11 #include <linux/spi/spi-mem.h>
18 * requires a 4-byte (32-bit) address.
24 #define SPINOR_OP_RDSR 0x05 /* Read status register */
25 #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */
26 #define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */
28 #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */
29 #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
30 #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */
31 #define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
[all …]
|
| /kernel/linux/linux-6.6/tools/perf/pmu-events/arch/x86/icelakex/ |
| D | uncore-memory.json | 6 "PerPkg": "1",
7 …mmands are issued to open up a page on the DRAM devices so that it can be read or written to with …
15 "PerPkg": "1",
16 …mmands are issued to open up a page on the DRAM devices so that it can be read or written to with …
24 "PerPkg": "1",
30 "BriefDescription": "All DRAM read CAS commands issued (including underfills)",
33 "PerPkg": "1",
34 …"PublicDescription": "Counts the total number of DRAM Read CAS commands, w/ and w/o auto-pre, issu…
39 "BriefDescription": "DRAM RD_CAS and WR_CAS Commands. : DRAM RD_CAS commands w/auto-pre",
42 "PerPkg": "1",
[all …]
|
| /kernel/linux/linux-6.6/tools/testing/selftests/bpf/verifier/ |
| D | ctx_sk_lookup.c | 2 "valid 1,2,4,8-byte reads from bpf_sk_lookup",
4 /* 1-byte read from family field */
8 offsetof(struct bpf_sk_lookup, family) + 1),
13 /* 2-byte read from family field */
18 /* 4-byte read from family field */
22 /* 1-byte read from protocol field */
26 offsetof(struct bpf_sk_lookup, protocol) + 1),
31 /* 2-byte read from protocol field */
36 /* 4-byte read from protocol field */
40 /* 1-byte read from remote_ip4 field */
[all …]
|
| /kernel/linux/linux-5.10/arch/parisc/kernel/ |
| D | perf_asm.S | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 /* low-level asm for "intrigue" (PA8500-8700 CPU perf counters)
5 * Copyright (C) 2001 Randolph Chung <tausq at parisc-linux.org>
6 * Copyright (C) 2001 Hewlett-Packard (Grant Grundler)
91 ;* arg0 : rdr to be read
98 ;* arg0 : rdr to be read
100 ;* %r24 - original DR2 value
101 ;* %r1 - scratch
102 ;* %r29 - scratch
114 ; read(shift in) the RDR.
[all …]
|
| /kernel/linux/linux-6.6/arch/parisc/kernel/ |
| D | perf_asm.S | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 /* low-level asm for "intrigue" (PA8500-8700 CPU perf counters)
5 * Copyright (C) 2001 Randolph Chung <tausq at parisc-linux.org>
6 * Copyright (C) 2001 Hewlett-Packard (Grant Grundler)
91 ;* arg0 : rdr to be read
98 ;* arg0 : rdr to be read
100 ;* %r24 - original DR2 value
101 ;* %r1 - scratch
102 ;* %r29 - scratch
114 ; read(shift in) the RDR.
[all …]
|
| /kernel/linux/linux-5.10/tools/testing/selftests/bpf/verifier/ |
| D | xdp_direct_packet_access.c | 2 "XDP pkt read, pkt_end mangling, bad access 1",
10 BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
11 BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
20 "XDP pkt read, pkt_end mangling, bad access 2",
28 BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
29 BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
38 "XDP pkt read, pkt_data' > pkt_end, corner case, good access",
45 BPF_JMP_REG(BPF_JGT, BPF_REG_1, BPF_REG_3, 1),
46 BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_1, -8),
55 "XDP pkt read, pkt_data' > pkt_end, bad access 1",
[all …]
|
| D | ctx_sk_lookup.c | 2 "valid 1,2,4,8-byte reads from bpf_sk_lookup",
4 /* 1-byte read from family field */
8 offsetof(struct bpf_sk_lookup, family) + 1),
13 /* 2-byte read from family field */
18 /* 4-byte read from family field */
22 /* 1-byte read from protocol field */
26 offsetof(struct bpf_sk_lookup, protocol) + 1),
31 /* 2-byte read from protocol field */
36 /* 4-byte read from protocol field */
40 /* 1-byte read from remote_ip4 field */
[all …]
|
| /kernel/linux/linux-5.10/Documentation/ABI/testing/ |
| D | sysfs-platform-dfl-fme | 1 What: /sys/bus/platform/devices/dfl-fme.0/ports_num
5 Description: Read-only. One DFL FPGA device may have more than 1
7 number of ports on the FPGA device when read it.
9 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_id
13 Description: Read-only. It returns Bitstream (static FPGA region)
17 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_metadata
21 Description: Read-only. It returns Bitstream (static FPGA region) meta
25 What: /sys/bus/platform/devices/dfl-fme.0/cache_size
29 Description: Read-only. It returns cache size of this FPGA device.
31 What: /sys/bus/platform/devices/dfl-fme.0/fabric_version
[all …]
|
| D | sysfs-driver-w1_therm | 5 (RW) read or write TH and TL (Temperature High an Low) alarms.
7 (typical -55 degC to 125 degC), if not values will be trimmed
11 master level, refer to Documentation/w1/w1-generic.rst for
40 * '1': device externally powered
41 * '-xx': xx is kernel error when reading power status
55 values after power-on. Read or write are :
59 * '-xx': xx is kernel error when reading the resolution
62 Some DS18B20 clones are fixed in 12-bit resolution, so the
63 actual resolution is read back from the chip and verified. Error
73 (RO) return the temperature in 1/1000 degC.
[all …]
|
| /kernel/linux/linux-6.6/Documentation/ABI/testing/ |
| D | sysfs-platform-dfl-fme | 1 What: /sys/bus/platform/devices/dfl-fme.0/ports_num
5 Description: Read-only. One DFL FPGA device may have more than 1
7 number of ports on the FPGA device when read it.
9 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_id
13 Description: Read-only. It returns Bitstream (static FPGA region)
17 What: /sys/bus/platform/devices/dfl-fme.0/bitstream_metadata
21 Description: Read-only. It returns Bitstream (static FPGA region) meta
25 What: /sys/bus/platform/devices/dfl-fme.0/cache_size
29 Description: Read-only. It returns cache size of this FPGA device.
31 What: /sys/bus/platform/devices/dfl-fme.0/fabric_version
[all …]
|
| D | sysfs-driver-w1_therm | 5 (RW) read or write TH and TL (Temperature High an Low) alarms.
7 (typical -55 degC to 125 degC), if not values will be trimmed
11 master level, refer to Documentation/w1/w1-generic.rst for
40 * '1': device externally powered
41 * '-xx': xx is kernel error when reading power status
55 values after power-on. Read or write are :
59 * '-xx': xx is kernel error when reading the resolution
62 Some DS18B20 clones are fixed in 12-bit resolution, so the
63 actual resolution is read back from the chip and verified. Error
73 (RO) return the temperature in 1/1000 degC.
[all …]
|
| /kernel/linux/linux-5.10/tools/perf/pmu-events/arch/x86/cascadelakex/ |
| D | uncore-memory.json | 3 "BriefDescription": "read requests to memory controller. Derived from unc_m_cas_count.rd",
4 "Counter": "0,1,2,3",
7 "PerPkg": "1",
14 "Counter": "0,1,2,3",
17 "PerPkg": "1",
24 "Counter": "0,1,2,3",
26 "PerPkg": "1",
31 "Counter": "0,1,2,3",
36 "PerPkg": "1",
41 "Counter": "0,1,2,3",
[all …]
|
| /kernel/linux/linux-5.10/tools/perf/pmu-events/arch/x86/skylakex/ |
| D | uncore-memory.json | 3 "BriefDescription": "read requests to memory controller. Derived from unc_m_cas_count.rd",
4 "Counter": "0,1,2,3",
7 "PerPkg": "1",
14 "Counter": "0,1,2,3",
17 "PerPkg": "1",
24 "Counter": "0,1,2,3",
26 "PerPkg": "1",
31 "Counter": "0,1,2,3",
36 "PerPkg": "1",
41 "Counter": "0,1,2,3",
[all …]
|
| /kernel/linux/linux-5.10/tools/perf/pmu-events/arch/arm64/ |
| D | armv8-recommended.json | 3 "PublicDescription": "Attributable Level 1 data cache access, read",
6 "BriefDescription": "L1D cache access, read"
9 "PublicDescription": "Attributable Level 1 data cache access, write",
15 "PublicDescription": "Attributable Level 1 data cache refill, read",
18 "BriefDescription": "L1D cache refill, read"
21 "PublicDescription": "Attributable Level 1 data cache refill, write",
27 "PublicDescription": "Attributable Level 1 data cache refill, inner",
33 "PublicDescription": "Attributable Level 1 data cache refill, outer",
39 "PublicDescription": "Attributable Level 1 data cache Write-Back, victim",
42 "BriefDescription": "L1D cache Write-Back, victim"
[all …]
|
| /kernel/linux/linux-6.6/tools/perf/pmu-events/arch/arm64/ |
| D | recommended.json | 3 "PublicDescription": "Attributable Level 1 data cache access, read",
6 "BriefDescription": "L1D cache access, read"
9 "PublicDescription": "Attributable Level 1 data cache access, write",
15 "PublicDescription": "Attributable Level 1 data cache refill, read",
18 "BriefDescription": "L1D cache refill, read"
21 "PublicDescription": "Attributable Level 1 data cache refill, write",
27 "PublicDescription": "Attributable Level 1 data cache refill, inner",
33 "PublicDescription": "Attributable Level 1 data cache refill, outer",
39 "PublicDescription": "Attributable Level 1 data cache Write-Back, victim",
42 "BriefDescription": "L1D cache Write-Back, victim"
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/memory-controllers/ |
| D | ti-aemif.txt | 4 provide a glue-less interface to a variety of asynchronous memory devices like
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible: "ti,davinci-aemif"
18 "ti,keystone-aemif"
19 "ti,da850-aemif"
21 - reg: contains offset/length value for AEMIF control registers
24 - #address-cells: Must be 2. The partition number has to be encoded in the
25 first address cell and it may accept values 0..N-1
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/memory-controllers/ |
| D | ti-aemif.txt | 4 provide a glue-less interface to a variety of asynchronous memory devices like
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible: "ti,davinci-aemif"
18 "ti,keystone-aemif"
19 "ti,da850-aemif"
21 - reg: contains offset/length value for AEMIF control registers
24 - #address-cells: Must be 2. The partition number has to be encoded in the
25 first address cell and it may accept values 0..N-1
[all …]
|