| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/net/ |
| D | mediatek-bluetooth.txt | 1 MediaTek SoC built-in Bluetooth Devices
4 This device is a serial attached device to BTIF device and thus it must be a
5 child node of the serial node with BTIF. The dt-bindings details for BTIF
6 device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
10 - compatible: Must be
11 "mediatek,mt7622-bluetooth": for MT7622 SoC
12 - clocks: Should be the clock specifiers corresponding to the entry in
13 clock-names property.
14 - clock-names: Should contain "ref" entries.
15 - power-domains: Phandle to the power domain that the device is part of
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/net/ |
| D | mediatek-bluetooth.txt | 1 MediaTek SoC built-in Bluetooth Devices
4 This device is a serial attached device to BTIF device and thus it must be a
5 child node of the serial node with BTIF. The dt-bindings details for BTIF
6 device can be known via Documentation/devicetree/bindings/serial/8250.yaml.
10 - compatible: Must be
11 "mediatek,mt7622-bluetooth": for MT7622 SoC
12 - clocks: Should be the clock specifiers corresponding to the entry in
13 clock-names property.
14 - clock-names: Should contain "ref" entries.
15 - power-domains: Phandle to the power domain that the device is part of
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/leds/ |
| D | leds-bcm6328.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Álvaro Fernández Rojas <noltari@gmail.com>
15 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
17 as spi-gpio. See
20 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
21 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
29 explained later in brcm,link-signal-sources). Even if a LED is hardware
[all …]
|
| D | leds-bcm6358.txt | 4 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
5 which can either be controlled by software (exporting the 74x164 as spi-gpio.
10 - compatible : should be "brcm,bcm6358-leds".
11 - #address-cells : must be 1.
12 - #size-cells : must be 0.
13 - reg : BCM6358 LED controller address and size.
16 - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
18 - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
21 Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
23 LED sub-node required properties:
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/leds/ |
| D | leds-bcm6328.txt | 5 However, on some devices there are Serial LEDs (LEDs connected to a 74x164
7 as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
9 Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
10 exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
18 explained later in brcm,link-signal-sources). Even if a LED is hardware
24 - compatible : should be "brcm,bcm6328-leds".
25 - #address-cells : must be 1.
26 - #size-cells : must be 0.
27 - reg : BCM6328 LED controller address and size.
30 - brcm,serial-leds : Boolean, enables Serial LEDs.
[all …]
|
| D | leds-bcm6358.txt | 4 In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
5 which can either be controlled by software (exporting the 74x164 as spi-gpio.
6 See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
10 - compatible : should be "brcm,bcm6358-leds".
11 - #address-cells : must be 1.
12 - #size-cells : must be 0.
13 - reg : BCM6358 LED controller address and size.
16 - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
18 - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
21 Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
[all …]
|
| /kernel/linux/linux-6.6/arch/mips/boot/dts/brcm/ |
| D | bcm63268-comtrend-vr-3032u.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
7 compatible = "comtrend,vr-3032u", "brcm,bcm63268";
8 model = "Comtrend VR-3032u";
17 stdout-path = &uart0;
23 brcm,serial-leds;
24 brcm,serial-dat-low;
25 brcm,serial-shift-inv;
29 brcm,hardware-controlled;
30 brcm,link-signal-sources = <0>;
[all …]
|
| /kernel/linux/linux-5.10/arch/mips/boot/dts/brcm/ |
| D | bcm63268-comtrend-vr-3032u.dts | 1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
7 compatible = "comtrend,vr-3032u", "brcm,bcm63268";
8 model = "Comtrend VR-3032u";
17 stdout-path = &uart0;
23 brcm,serial-leds;
24 brcm,serial-dat-low;
25 brcm,serial-shift-inv;
29 brcm,hardware-controlled;
30 brcm,link-signal-sources = <0>;
[all …]
|
| /kernel/linux/linux-6.6/arch/mips/txx9/generic/ |
| D | pci.c | 8 * Copyright 2001-2005 MontaVista Software Inc.
9 * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
10 * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
36 fake_bus.ops = hose->pci_ops; in early_read_config_word()
52 int cap66 = -1; in txx9_pci66_check()
126 new->r_mem[0].name = "PCI mem"; in txx9_alloc_pci_controller()
127 new->r_mem[1].name = "PCI mmio"; in txx9_alloc_pci_controller()
128 new->r_io.name = "PCI io"; in txx9_alloc_pci_controller()
129 new->c.mem_resource = new->r_mem; in txx9_alloc_pci_controller()
130 new->c.io_resource = &new->r_io; in txx9_alloc_pci_controller()
[all …]
|
| /kernel/linux/linux-5.10/arch/mips/txx9/generic/ |
| D | pci.c | 8 * Copyright 2001-2005 MontaVista Software Inc.
9 * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
10 * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
36 fake_bus.ops = hose->pci_ops; in early_read_config_word()
52 int cap66 = -1; in txx9_pci66_check()
125 new->r_mem[0].name = "PCI mem"; in txx9_alloc_pci_controller()
126 new->r_mem[1].name = "PCI mmio"; in txx9_alloc_pci_controller()
127 new->r_io.name = "PCI io"; in txx9_alloc_pci_controller()
128 new->c.mem_resource = new->r_mem; in txx9_alloc_pci_controller()
129 new->c.io_resource = &new->r_io; in txx9_alloc_pci_controller()
[all …]
|
| /kernel/linux/linux-6.6/Documentation/iio/ |
| D | bno055.rst | 1 .. SPDX-License-Identifier: GPL-2.0
10 This driver supports Bosch BNO055 IMUs (on both serial and I2C busses).
15 provided, but some sensor settings (e.g. low pass filtering and range)
44 bno055-caldata-0e7c26a33541515120204a35342b04ff.dat
45 bno055-caldata.dat
47 In non-fusion mode the IIO 'offset' attributes provide access to the
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/sound/ |
| D | davinci-mcasp-audio.txt | 4 - compatible :
5 "ti,dm646x-mcasp-audio" : for DM646x platforms
6 "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms
7 "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx)
8 "ti,dra7-mcasp-audio" : for DRA7xx platforms
10 - reg : Should contain reg specifiers for the entries in the reg-names property.
11 - reg-names : Should contain:
14 * "dat" for separate data port register access (optional).
15 - op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
16 IEC60958-1, and AES-3 formats.
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/sound/ |
| D | davinci-mcasp-audio.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jayesh Choudhary <j-choudhary@ti.com>
15 - ti,dm646x-mcasp-audio
16 - ti,da830-mcasp-audio
17 - ti,am33xx-mcasp-audio
18 - ti,dra7-mcasp-audio
19 - ti,omap4-mcasp-audio
[all …]
|
| /kernel/linux/linux-5.10/arch/arm64/boot/dts/mediatek/ |
| D | mt7622-bananapi-bpi-r64.dts | 5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
16 model = "Bananapi BPI-R64";
17 compatible = "bananapi,bpi-r64", "mediatek,mt7622";
24 stdout-path = "serial0:115200n8";
30 proc-supply = <&mt6380_vcpu_reg>;
31 sram-supply = <&mt6380_vm_reg>;
35 proc-supply = <&mt6380_vcpu_reg>;
[all …]
|
| /kernel/linux/linux-6.6/arch/arm64/boot/dts/mediatek/ |
| D | mt7622-bananapi-bpi-r64.dts | 5 * SPDX-License-Identifier: (GPL-2.0 OR MIT)
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/leds/common.h>
17 model = "Bananapi BPI-R64";
18 chassis-type = "embedded";
19 compatible = "bananapi,bpi-r64", "mediatek,mt7622";
26 stdout-path = "serial0:115200n8";
32 proc-supply = <&mt6380_vcpu_reg>;
[all …]
|
| /kernel/linux/linux-5.10/drivers/leds/ |
| D | leds-bcm6328.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
59 * struct bcm6328_led - state container for bcm6328 based LEDs
66 * @active_low: LED is active low
98 * bits [31:0] -> LEDs 8-23
99 * bits [47:32] -> LEDs 0-7
100 * bits [63:48] -> unused
105 return pin + 16; /* LEDs 0-7 (bits 47:32) */ in bcm6328_pin2shift()
107 return pin - 8; /* LEDs 8-23 (bits 31:0) */ in bcm6328_pin2shift()
115 shift = bcm6328_pin2shift(led->pin); in bcm6328_led_mode()
[all …]
|
| /kernel/linux/linux-6.6/drivers/leds/ |
| D | leds-bcm6328.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
59 * struct bcm6328_led - state container for bcm6328 based LEDs
66 * @active_low: LED is active low
98 * bits [31:0] -> LEDs 8-23
99 * bits [47:32] -> LEDs 0-7
100 * bits [63:48] -> unused
105 return pin + 16; /* LEDs 0-7 (bits 47:32) */ in bcm6328_pin2shift()
107 return pin - 8; /* LEDs 8-23 (bits 31:0) */ in bcm6328_pin2shift()
115 shift = bcm6328_pin2shift(led->pin); in bcm6328_led_mode()
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/can/softing/ |
| D | softing_fw.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2008-2010
5 * - Kurt Van Dijck, EIA Electronics
16 * low level DPRAM command.
17 * Make sure that card->dpram[DPRAM_FCT_HOST] is preset
25 iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); in _softing_fct_cmd()
26 iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); in _softing_fct_cmd()
27 iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); in _softing_fct_cmd()
34 ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + in _softing_fct_cmd()
35 (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); in _softing_fct_cmd()
[all …]
|
| /kernel/linux/linux-5.10/drivers/net/can/softing/ |
| D | softing_fw.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2008-2010
5 * - Kurt Van Dijck, EIA Electronics
16 * low level DPRAM command.
17 * Make sure that card->dpram[DPRAM_FCT_HOST] is preset
25 iowrite16(cmd, &card->dpram[DPRAM_FCT_PARAM]); in _softing_fct_cmd()
26 iowrite8(vector >> 8, &card->dpram[DPRAM_FCT_HOST + 1]); in _softing_fct_cmd()
27 iowrite8(vector, &card->dpram[DPRAM_FCT_HOST]); in _softing_fct_cmd()
34 ret = ioread8(&card->dpram[DPRAM_FCT_HOST]) + in _softing_fct_cmd()
35 (ioread8(&card->dpram[DPRAM_FCT_HOST + 1]) << 8); in _softing_fct_cmd()
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/mach-omap1/ |
| D | board-ams-delta.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * linux/arch/arm/mach-omap1/board-ams-delta.c
5 * Modified from board-generic.c
19 #include <linux/mtd/nand-gpio.h>
29 #include <linux/platform_data/gpio-omap.h>
30 #include <linux/soc/ti/omap1-mux.h>
32 #include <asm/serial.h>
33 #include <asm/mach-types.h>
37 #include <linux/platform_data/keypad-omap.h>
41 #include "ams-delta-fiq.h"
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/mach-omap1/ |
| D | board-ams-delta.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * linux/arch/arm/mach-omap1/board-ams-delta.c
5 * Modified from board-generic.c
20 #include <linux/mtd/nand-gpio.h>
30 #include <linux/platform_data/gpio-omap.h>
32 #include <asm/serial.h>
33 #include <asm/mach-types.h>
37 #include <linux/platform_data/keypad-omap.h>
43 #include "ams-delta-fiq.h"
44 #include "board-ams-delta.h"
[all …]
|
| /kernel/linux/linux-5.10/drivers/media/pci/cx23885/ |
| D | cx23885-cards.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
14 #include <media/drv-intf/cx25840.h>
18 #include "tuner-xc2028.h"
19 #include "netup-eeprom.h"
20 #include "netup-init.h"
21 #include "altera-ci.h"
24 #include "cx23888-ir.h"
29 "NetUP Dual DVB-T/C CI card revision");
35 "\t\t\tHVR-1250 (reported safe)\n"
41 /* ------------------------------------------------------------------ */
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/pci/cx23885/ |
| D | cx23885-cards.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
14 #include <media/drv-intf/cx25840.h>
19 #include "netup-eeprom.h"
20 #include "netup-init.h"
21 #include "altera-ci.h"
24 #include "cx23888-ir.h"
29 "NetUP Dual DVB-T/C CI card revision");
35 "\t\t\tHVR-1250 (reported safe)\n"
41 /* ------------------------------------------------------------------ */
64 .name = "Hauppauge WinTV-HVR1800lp",
[all …]
|
| /kernel/linux/linux-6.6/Documentation/usb/ |
| D | gadget-testing.rst | 23 14. SERIAL function
38 Function-specific configfs interface
39 ------------------------------------
46 The attribute is read-only.
48 There can be at most 4 ACM/generic serial/OBEX ports in the system.
52 ------------------------
77 Function-specific configfs interface
78 ------------------------------------
100 ------------------------
117 Function-specific configfs interface
[all …]
|
| /kernel/linux/linux-6.6/Documentation/firmware-guide/acpi/ |
| D | enumeration.rst | 1 .. SPDX-License-Identifier: GPL-2.0
9 devices behind serial bus controllers.
13 that are accessed through memory-mapped registers.
15 In order to support this and re-use the existing drivers as much as
18 - Devices that have no bus connector resource are represented as
21 - Devices behind real busses where there is a connector resource
34 This means that when ACPI_HANDLE(dev) returns non-NULL the device was
36 device-specific configuration. There is an example of this below.
43 for the device and add supported ACPI IDs. If this same IP-block is used on
44 some other non-ACPI platform, the driver might work out of the box or needs
[all …]
|