| /kernel/linux/linux-6.6/drivers/regulator/ |
| D | qcom-labibb-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0-only
114 ret = regmap_update_bits(rdev->regmap, in qcom_labibb_ocp_hw_enable()
115 vreg->base + REG_LABIBB_INT_LATCHED_CLR, in qcom_labibb_ocp_hw_enable()
121 return regmap_update_bits(rdev->regmap, in qcom_labibb_ocp_hw_enable()
122 vreg->base + REG_LABIBB_INT_EN_SET, in qcom_labibb_ocp_hw_enable()
130 return regmap_update_bits(rdev->regmap, in qcom_labibb_ocp_hw_disable()
131 vreg->base + REG_LABIBB_INT_EN_CLR, in qcom_labibb_ocp_hw_disable()
136 * qcom_labibb_check_ocp_status - Check the Over-Current Protection status
140 * set, then there is no Over-Current event.
142 * Returns: Zero if there is no over-current, 1 if in over-current or
[all …]
|
| D | tps65219-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0
3 // tps65219-regulator.c
7 // Copyright (C) 2022 BayLibre Incorporated - https://www.baylibre.com/
10 // "J Keerthy <j-keerthy@ti.com>"
34 { "LDO3_SCG", "LDO3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
37 { "LDO4_SCG", "LDO4", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
40 { "LDO1_SCG", "LDO1", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
43 { "LDO2_SCG", "LDO2", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
46 { "BUCK3_SCG", "BUCK3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
50 { "BUCK1_SCG", "BUCK1", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
[all …]
|
| D | tps6594-regulator.c | 1 // SPDX-License-Identifier: GPL-2.0
5 // Copyright (C) 2023 BayLibre Incorporated - https://www.baylibre.com/
42 /* Multi-phase DCDC's */
203 { TPS6594_IRQ_NAME_BUCK1_SC, "BUCK1", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
211 { TPS6594_IRQ_NAME_BUCK2_SC, "BUCK2", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
219 { TPS6594_IRQ_NAME_BUCK3_SC, "BUCK3", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
227 { TPS6594_IRQ_NAME_BUCK4_SC, "BUCK4", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
235 { TPS6594_IRQ_NAME_BUCK5_SC, "BUCK5", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
243 { TPS6594_IRQ_NAME_LDO1_SC, "LDO1", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
251 { TPS6594_IRQ_NAME_LDO2_SC, "LDO2", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
[all …]
|
| /kernel/linux/linux-6.6/Documentation/ABI/testing/ |
| D | sysfs-class-led-flash | 55 Flash faults are re-read after strobing the flash. Possible
58 * led-over-voltage
61 * flash-timeout-exceeded
65 * controller-over-temperature
68 * controller-short-circuit
69 the short circuit protection
71 * led-power-supply-over-current
75 * indicator-led-fault
77 a short or open circuit condition on the indicator LED
78 * led-under-voltage
[all …]
|
| /kernel/linux/linux-5.10/Documentation/ABI/testing/ |
| D | sysfs-class-led-flash | 55 Flash faults are re-read after strobing the flash. Possible
58 * led-over-voltage
61 * flash-timeout-exceeded
65 * controller-over-temperature
68 * controller-short-circuit
69 the short circuit protection
71 * led-power-supply-over-current
75 * indicator-led-fault
77 a short or open circuit condition on the indicator LED
78 * led-under-voltage
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/regulator/ |
| D | qcom-labibb-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sumit Semwal <sumit.semwal@linaro.org>
19 const: qcom,pmi8998-lab-ibb
29 Short-circuit interrupt for lab.
32 - interrupts
42 Short-circuit interrupt for lab.
45 - interrupts
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/regulator/ |
| D | qcom-labibb-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/regulator/qcom-labibb-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sumit Semwal <sumit.semwal@linaro.org>
19 const: qcom,pmi8998-lab-ibb
27 qcom,soft-start-us:
36 Short-circuit and over-current interrupts for lab.
38 interrupt-names:
41 - const: sc-err
[all …]
|
| D | ti,tps65219.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: TI tps65219 Power Management Integrated Circuit regulators
10 - Jerome Neanne <jerome.neanne@baylibre.com>
18 - ti,tps65219
23 system-power-controller:
29 description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
32 interrupt-controller: true
34 '#interrupt-cells':
[all …]
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/media/ |
| D | glossary.rst | 1 .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
51 **Field-programmable Gate Array**
53 An :term:`IC` circuit designed to be configured by a customer or
56 See https://en.wikipedia.org/wiki/Field-programmable_gate_array.
65 together make a larger user-facing functional peripheral. For
73 **Inter-Integrated Circuit**
75 A multi-master, multi-slave, packet switched, single-ended,
77 like sub-device hardware components.
79 See http://www.nxp.com/docs/en/user-guide/UM10204.pdf.
82 **Integrated circuit**
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/ |
| D | glossary.rst | 1 .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
51 **Field-programmable Gate Array**
53 An :term:`IC` circuit designed to be configured by a customer or
56 See https://en.wikipedia.org/wiki/Field-programmable_gate_array.
65 together make a larger user-facing functional peripheral. For
73 **Inter-Integrated Circuit**
75 A multi-master, multi-slave, packet switched, single-ended,
77 like sub-device hardware components.
79 See http://www.nxp.com/docs/en/user-guide/UM10204.pdf.
82 **Integrated circuit**
[all …]
|
| /kernel/linux/linux-6.6/net/netrom/ |
| D | af_netrom.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
59 static unsigned short circuit = 0x101; variable
79 lockdep_set_class(&txq->_xmit_lock, &nr_netdev_xmit_lock_key); in nr_set_lockdep_one()
84 lockdep_set_class(&dev->addr_list_lock, &nr_netdev_addr_lock_key); in nr_set_lockdep_key()
107 if (nr_sk(s)->device == dev) in nr_kill_by_device()
151 if (!ax25cmp(&nr_sk(s)->source_addr, addr) && in nr_find_listener()
152 s->sk_state == TCP_LISTEN) { in nr_find_listener()
163 * Find a connected NET/ROM socket given my circuit IDs.
173 if (nr->my_index == index && nr->my_id == id) { in nr_find_socket()
185 * Find a connected NET/ROM socket given their circuit IDs.
[all …]
|
| /kernel/linux/linux-5.10/net/netrom/ |
| D | af_netrom.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
59 static unsigned short circuit = 0x101; variable
79 lockdep_set_class(&txq->_xmit_lock, &nr_netdev_xmit_lock_key); in nr_set_lockdep_one()
84 lockdep_set_class(&dev->addr_list_lock, &nr_netdev_addr_lock_key); in nr_set_lockdep_key()
107 if (nr_sk(s)->device == dev) in nr_kill_by_device()
151 if (!ax25cmp(&nr_sk(s)->source_addr, addr) && in nr_find_listener()
152 s->sk_state == TCP_LISTEN) { in nr_find_listener()
163 * Find a connected NET/ROM socket given my circuit IDs.
173 if (nr->my_index == index && nr->my_id == id) { in nr_find_socket()
185 * Find a connected NET/ROM socket given their circuit IDs.
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/pinctrl/ |
| D | cirrus,madera.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - patches@opensource.cirrus.com
30 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
33 pinctrl-0:
38 pinctrl-names:
43 pin-settings:
50 '-pins$':
53 - $ref: "pincfg-node.yaml#"
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pinctrl/ |
| D | cirrus,madera.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - patches@opensource.cirrus.com
30 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
33 pin-settings:
40 '-pins$':
43 - $ref: pincfg-node.yaml#
44 - $ref: pinmux-node.yaml#
63 dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/leds/backlight/ |
| D | qcom-wled.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 - Kiran Gunda <kgunda@codeaurora.org>
21 - qcom,pm8941-wled
22 - qcom,pmi8950-wled
23 - qcom,pmi8994-wled
24 - qcom,pmi8998-wled
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/leds/backlight/ |
| D | qcom-wled.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Bjorn Andersson <bjorn.andersson@linaro.org>
11 - Kiran Gunda <kgunda@codeaurora.org>
21 - qcom,pm8941-wled
22 - qcom,pmi8998-wled
23 - qcom,pm660l-wled
24 - qcom,pm8150l-wled
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/addac/ |
| D | adi,ad74115.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Cosmin Tanislav <cosmin.tanislav@analog.com>
13 The AD74115H is a single-channel software configurable input/output
17 chip solution with an SPI interface. The device features a 16-bit ADC and a
18 14-bit DAC.
25 - adi,ad74115h
30 spi-max-frequency:
33 spi-cpol: true
[all …]
|
| /kernel/linux/linux-5.10/Documentation/userspace-api/media/v4l/ |
| D | ext-ctrls-flash.rst | 1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
3 .. _flash-controls:
17 .. _flash-controls-use-cases:
24 ------------------------------------------
35 ----------------------------------------
37 The synchronised LED flash is pre-programmed by the host (power and
46 ------------------
52 .. _flash-control-id:
55 -----------------
61 Defines the mode of the flash LED, the high-power white LED attached
[all …]
|
| /kernel/linux/linux-6.6/Documentation/userspace-api/media/v4l/ |
| D | ext-ctrls-flash.rst | 1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
3 .. _flash-controls:
17 .. _flash-controls-use-cases:
24 ------------------------------------------
35 ----------------------------------------
37 The synchronised LED flash is pre-programmed by the host (power and
46 ------------------
52 .. _flash-control-id:
55 -----------------
61 Defines the mode of the flash LED, the high-power white LED attached
[all …]
|
| /kernel/linux/linux-6.6/drivers/mfd/ |
| D | ti-lmu.c | 1 // SPDX-License-Identifier: GPL-2.0-only
16 #include <linux/mfd/ti-lmu.h>
17 #include <linux/mfd/ti-lmu-register.h>
30 if (lmu->en_gpio) in ti_lmu_enable_hw()
31 gpiod_set_value(lmu->en_gpio, 1); in ti_lmu_enable_hw()
36 /* LM3631 has additional power up sequence - enable LCD_EN bit. */ in ti_lmu_enable_hw()
38 return regmap_update_bits(lmu->regmap, LM3631_REG_DEVCTRL, in ti_lmu_enable_hw()
49 if (lmu->en_gpio) in ti_lmu_disable_hw()
50 gpiod_set_value(lmu->en_gpio, 0); in ti_lmu_disable_hw()
55 .name = "lm363x-regulator", \
[all …]
|
| /kernel/linux/linux-5.10/drivers/mfd/ |
| D | ti-lmu.c | 1 // SPDX-License-Identifier: GPL-2.0-only
16 #include <linux/mfd/ti-lmu.h>
17 #include <linux/mfd/ti-lmu-register.h>
31 if (lmu->en_gpio) in ti_lmu_enable_hw()
32 gpiod_set_value(lmu->en_gpio, 1); in ti_lmu_enable_hw()
37 /* LM3631 has additional power up sequence - enable LCD_EN bit. */ in ti_lmu_enable_hw()
39 return regmap_update_bits(lmu->regmap, LM3631_REG_DEVCTRL, in ti_lmu_enable_hw()
50 if (lmu->en_gpio) in ti_lmu_disable_hw()
51 gpiod_set_value(lmu->en_gpio, 0); in ti_lmu_disable_hw()
56 .name = "lm363x-regulator", \
[all …]
|
| /kernel/linux/linux-6.6/drivers/media/dvb-frontends/ |
| D | lnbp21.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * lnbp21.h - driver for lnb supply and control ic lnbp21
31 0:Iout=500-650mA Isc=300mA
32 1:Iout=400-550mA Isc=200mA */
34 /* [RW] short-circuit protect:
|
| /kernel/linux/linux-5.10/drivers/media/dvb-frontends/ |
| D | lnbp21.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * lnbp21.h - driver for lnb supply and control ic lnbp21
31 0:Iout=500-650mA Isc=300mA
32 1:Iout=400-550mA Isc=200mA */
34 /* [RW] short-circuit protect:
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mfd/ |
| D | rohm,bd9576-pmic.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit
10 - Matti Vaittinen <mazziesaccount@gmail.com>
14 powering the R-Car series processors.
21 - rohm,bd9576
22 - rohm,bd9573
32 rohm,vout1-en-low:
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/mfd/ |
| D | rohm,bd71847-pmic.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
10 - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
14 single-core, dual-core, and quad-core SoCs such as NXP-i.MX 8M. It is
18 …/www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applica…
19 …//www.rohm.com/products/power-management/power-management-ic-for-system/industrial-consumer-applic…
24 - rohm,bd71847
[all …]
|