| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/memory-controllers/ |
| D | mvebu-devbus.txt | 9 - compatible: Armada 370/XP SoC are supported using the
10 "marvell,mvebu-devbus" compatible string.
13 "marvell,orion-devbus" compatible string.
15 - reg: A resource specifier for the register space.
20 - #address-cells: Must be set to 1
21 - #size-cells: Must be set to 1
22 - ranges: Must be set up to reflect the memory layout with four
23 integer values for each chip-select line in use:
28 - devbus,keep-config This property can optionally be used to keep
37 - devbus,turn-off-ps: Defines the time during which the controller does not
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/memory-controllers/ |
| D | mvebu-devbus.txt | 9 - compatible: Armada 370/XP SoC are supported using the
10 "marvell,mvebu-devbus" compatible string.
13 "marvell,orion-devbus" compatible string.
15 - reg: A resource specifier for the register space.
20 - #address-cells: Must be set to 1
21 - #size-cells: Must be set to 1
22 - ranges: Must be set up to reflect the memory layout with four
23 integer values for each chip-select line in use:
28 - devbus,keep-config This property can optionally be used to keep
37 - devbus,turn-off-ps: Defines the time during which the controller does not
[all …]
|
| /kernel/linux/linux-6.6/Documentation/devicetree/bindings/display/samsung/ |
| D | samsung,fimd.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Inki Dae <inki.dae@samsung.com>
11 - Seung-Woo Kim <sw0312.kim@samsung.com>
12 - Kyungmin Park <kyungmin.park@samsung.com>
13 - Krzysztof Kozlowski <krzk@kernel.org>
18 - samsung,s3c2443-fimd
19 - samsung,s3c6400-fimd
20 - samsung,s5pv210-fimd
[all …]
|
| D | samsung,exynos7-decon.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Inki Dae <inki.dae@samsung.com>
11 - Seung-Woo Kim <sw0312.kim@samsung.com>
12 - Kyungmin Park <kyungmin.park@samsung.com>
13 - Krzysztof Kozlowski <krzk@kernel.org>
22 const: samsung,exynos7-decon
27 clock-names:
[all …]
|
| /kernel/linux/linux-5.10/Documentation/devicetree/bindings/display/exynos/ |
| D | samsung-fimd.txt | 1 Device-Tree bindings for Samsung SoC display controller (FIMD)
8 - compatible: value should be one of the following
9 "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
10 "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
11 "samsung,s5pv210-fimd"; /* for S5PV210 SoC */
12 "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
13 "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
14 "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
15 "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
17 - reg: physical base address and length of the FIMD registers set.
[all …]
|
| /kernel/linux/linux-5.10/include/linux/platform_data/ |
| D | video-pxafb.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
5 * Author: Jean-Frederic Clere
11 #include <mach/regs-lcd.h>
16 * bits 0 - 3: for LCD panel type:
18 * STN - for passive matrix
19 * DSTN - for dual scan passive matrix
20 * TFT - for active matrix
22 * bits 4 - 9 : for bus width
23 * bits 10-17 : for AC Bias Pin Frequency
62 * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
[all …]
|
| /kernel/linux/linux-6.6/arch/arm/boot/dts/marvell/ |
| D | armada-xp-crs328-4c-20s-4s.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for CRS328-4C-20S-4S+ board
8 * Based on armada-xp-db.dts
13 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
20 /dts-v1/;
21 #include "armada-xp-98dx3236.dtsi"
24 model = "CRS328-4C-20S-4S+";
25 compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
38 arm,parity-enable;
39 marvell,ecc-enable;
[all …]
|
| D | armada-xp-crs305-1g-4s.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for CRS305-1G-4S board
8 * Based on armada-xp-db.dts
13 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
20 /dts-v1/;
21 #include "armada-xp-98dx3236.dtsi"
24 model = "CRS305-1G-4S+";
25 compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
38 arm,parity-enable;
39 marvell,ecc-enable;
[all …]
|
| D | armada-xp-crs326-24g-2s.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for CRS326-24G-2S board
8 * Based on armada-xp-db.dts
13 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
20 /dts-v1/;
21 #include "armada-xp-98dx3236.dtsi"
24 model = "CRS326-24G-2S+";
25 compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
38 arm,parity-enable;
39 marvell,ecc-enable;
[all …]
|
| D | armada-xp-db-xc3-24g4xg.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for DB-XC3-24G4XG board
7 * Based on armada-xp-db.dts
12 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
19 /dts-v1/;
20 #include "armada-xp-98dx3336.dtsi"
23 model = "DB-XC3-24G4XG";
24 compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
37 arm,parity-enable;
38 marvell,ecc-enable;
[all …]
|
| D | armada-xp-db-dxbc2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for DB-DXBC2 board
7 * Based on armada-xp-db.dts
12 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
19 /dts-v1/;
20 #include "armada-xp-98dx4251.dtsi"
24 compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
43 devbus,bus-width = <16>;
44 devbus,turn-off-ps = <60000>;
45 devbus,badr-skew-ps = <0>;
[all …]
|
| D | armada-xp-openblocks-ax3-4.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for OpenBlocks AX3-4 board
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include "armada-xp-mv78260.dtsi"
16 model = "PlatHome OpenBlocks AX3-4 board";
17 …compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell…
20 stdout-path = "serial0:115200n8";
[all …]
|
| D | armada-385-atl-x530.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 (x530/AT-GS980MX)
9 /dts-v1/;
10 #include "armada-385.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
15 model = "x530/AT-GS980MX";
19 stdout-path = "serial1:115200n8";
32 internal-regs {
34 pinctrl-names = "default";
35 pinctrl-0 = <&i2c0_pins>;
[all …]
|
| /kernel/linux/linux-5.10/arch/arm/boot/dts/ |
| D | armada-xp-db-xc3-24g4xg.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for DB-XC3-24G4XG board
7 * Based on armada-xp-db.dts
12 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
19 /dts-v1/;
20 #include "armada-xp-98dx3336.dtsi"
23 model = "DB-XC3-24G4XG";
24 compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
37 arm,parity-enable;
38 marvell,ecc-enable;
[all …]
|
| D | armada-xp-db-dxbc2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for DB-DXBC2 board
7 * Based on armada-xp-db.dts
12 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
19 /dts-v1/;
20 #include "armada-xp-98dx4251.dtsi"
24 compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
43 devbus,bus-width = <16>;
44 devbus,turn-off-ps = <60000>;
45 devbus,badr-skew-ps = <0>;
[all …]
|
| D | armada-xp-openblocks-ax3-4.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for OpenBlocks AX3-4 board
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include "armada-xp-mv78260.dtsi"
16 model = "PlatHome OpenBlocks AX3-4 board";
17 …compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell…
20 stdout-path = "serial0:115200n8";
[all …]
|
| D | armada-xp-gp.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-MV784MP-GP)
6 * Copyright (C) 2013-2014 Marvell
9 * Gregory CLEMENT <gregory.clement@free-electrons.com>
10 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
15 * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
22 /dts-v1/;
23 #include <dt-bindings/gpio/gpio.h>
24 #include "armada-xp-mv78460.dtsi"
27 model = "Marvell Armada XP Development Board DB-MV784MP-GP";
[all …]
|
| /kernel/linux/linux-6.6/include/linux/platform_data/ |
| D | video-pxafb.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
5 * Author: Jean-Frederic Clere
15 * bits 0 - 3: for LCD panel type:
17 * STN - for passive matrix
18 * DSTN - for dual scan passive matrix
19 * TFT - for active matrix
21 * bits 4 - 9 : for bus width
22 * bits 10-17 : for AC Bias Pin Frequency
61 * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
86 /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
[all …]
|
| /kernel/linux/linux-6.6/arch/mips/include/uapi/asm/ |
| D | ucontext.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
6 * struct extcontext - extended context header structure
26 * struct msa_extcontext - MSA extended context structure
28 * @wr: the most significant 64 bits of each MSA vector register
32 * this structure will hold the MSA context of the task as it was prior to the
39 unsigned long long wr[32]; member
46 * struct ucontext - user context structure
55 /* Historic fields matching asm-generic */
|
| /kernel/linux/linux-5.10/arch/mips/include/uapi/asm/ |
| D | ucontext.h | 1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
6 * struct extcontext - extended context header structure
26 * struct msa_extcontext - MSA extended context structure
28 * @wr: the most significant 64 bits of each MSA vector register
32 * this structure will hold the MSA context of the task as it was prior to the
39 unsigned long long wr[32]; member
46 * struct ucontext - user context structure
55 /* Historic fields matching asm-generic */
|
| /kernel/linux/linux-6.6/drivers/staging/fbtft/ |
| D | fbtft-io.c | 1 // SPDX-License-Identifier: GPL-2.0
16 fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, in fbtft_write_spi()
19 if (!par->spi) { in fbtft_write_spi()
20 dev_err(par->info->device, in fbtft_write_spi()
21 "%s: par->spi is unexpectedly NULL\n", __func__); in fbtft_write_spi()
22 return -1; in fbtft_write_spi()
27 return spi_sync(par->spi, &m); in fbtft_write_spi()
32 * fbtft_write_spi_emulate_9() - write SPI emulating 9-bit
37 * When 9-bit SPI is not available, this function can be used to emulate that.
38 * par->extra must hold a transformation buffer used for transfer.
[all …]
|
| /kernel/linux/linux-5.10/drivers/staging/fbtft/ |
| D | fbtft-io.c | 1 // SPDX-License-Identifier: GPL-2.0
16 fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, in fbtft_write_spi()
19 if (!par->spi) { in fbtft_write_spi()
20 dev_err(par->info->device, in fbtft_write_spi()
21 "%s: par->spi is unexpectedly NULL\n", __func__); in fbtft_write_spi()
22 return -1; in fbtft_write_spi()
27 return spi_sync(par->spi, &m); in fbtft_write_spi()
32 * fbtft_write_spi_emulate_9() - write SPI emulating 9-bit
37 * When 9-bit SPI is not available, this function can be used to emulate that.
38 * par->extra must hold a transformation buffer used for transfer.
[all …]
|
| /kernel/linux/linux-5.10/arch/sparc/kernel/ |
| D | rtrap_64.S | 1 /* SPDX-License-Identifier: GPL-2.0 */
31 * the ADI security, we must re-enable PSTATE.mcde before
47 * the ADI security, we must re-enable PSTATE.mcde before
73 * the ADI security, we must re-enable PSTATE.mcde before
105 * If we re-enable interrupts here, we can recurse down
128 * If we re-enable interrupts here, we can recurse down
143 /* We must hold IRQs off and atomically test schedule+signal
144 * state, then hold them off all the way back to userspace.
179 /* This fpdepth clear is necessary for non-syscall rtraps only */
224 wr %o3, %g0, %y
[all …]
|
| /kernel/linux/linux-6.6/arch/sparc/kernel/ |
| D | rtrap_64.S | 1 /* SPDX-License-Identifier: GPL-2.0 */
31 * the ADI security, we must re-enable PSTATE.mcde before
47 * the ADI security, we must re-enable PSTATE.mcde before
73 * the ADI security, we must re-enable PSTATE.mcde before
105 * If we re-enable interrupts here, we can recurse down
128 * If we re-enable interrupts here, we can recurse down
143 /* We must hold IRQs off and atomically test schedule+signal
144 * state, then hold them off all the way back to userspace.
179 /* This fpdepth clear is necessary for non-syscall rtraps only */
224 wr %o3, %g0, %y
[all …]
|
| /kernel/linux/linux-6.6/drivers/net/wireless/intel/iwlwifi/mei/ |
| D | main.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2021-2023 Intel Corporation
23 #include "iwl-mei.h"
25 #include "trace-data.h"
40 * Since iwlwifi calls iwlmei without any context, hold a pointer to the
96 * +-----------------------------------+
98 * +-----------------------------------+
99 * |Host -> ME data queue |
100 * +-----------------------------------+
101 * |Host -> ME notif queue |
[all …]
|