1 /* ------------------------------------------------------------------ 2 * Copyright (C) 1998-2009 PacketVideo 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either 13 * express or implied. 14 * See the License for the specific language governing permissions 15 * and limitations under the License. 16 * ------------------------------------------------------------------- 17 */ 18 /* 19 * Copyright (c) 2008 The Khronos Group Inc. 20 * 21 * Permission is hereby granted, free of charge, to any person obtaining 22 * a copy of this software and associated documentation files (the 23 * "Software"), to deal in the Software without restriction, including 24 * without limitation the rights to use, copy, modify, merge, publish, 25 * distribute, sublicense, and/or sell copies of the Software, and to 26 * permit persons to whom the Software is furnished to do so, subject 27 * to the following conditions: 28 * The above copyright notice and this permission notice shall be included 29 * in all copies or substantial portions of the Software. 30 * 31 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS 32 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 33 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. 34 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY 35 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, 36 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE 37 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 38 * 39 */ 40 41 /** @file OMX_Audio.h - OpenMax IL version 1.1.2 42 * The structures needed by Audio components to exchange 43 * parameters and configuration data with the componenmilts. 44 */ 45 46 #ifndef OMX_Audio_h 47 #define OMX_Audio_h 48 49 #ifdef __cplusplus 50 extern "C" { 51 #endif /* __cplusplus */ 52 53 54 /* Each OMX header must include all required header files to allow the 55 * header to compile without errors. The includes below are required 56 * for this header file to compile successfully 57 */ 58 59 #include <OMX_Core.h> 60 61 /** @defgroup midi MIDI 62 * @ingroup audio 63 */ 64 65 /** @defgroup effects Audio effects 66 * @ingroup audio 67 */ 68 69 /** @defgroup audio OpenMAX IL Audio Domain 70 * Structures for OpenMAX IL Audio domain 71 * @{ 72 */ 73 74 /** Enumeration used to define the possible audio codings. 75 * If "OMX_AUDIO_CodingUnused" is selected, the coding selection must 76 * be done in a vendor specific way. Since this is for an audio 77 * processing element this enum is relevant. However, for another 78 * type of component other enums would be in this area. 79 */ 80 typedef enum OMX_AUDIO_CODINGTYPE { 81 OMX_AUDIO_CodingUnused = 0, /**< Placeholder value when coding is N/A */ 82 OMX_AUDIO_CodingAutoDetect, /**< auto detection of audio format */ 83 OMX_AUDIO_CodingPCM, /**< Any variant of PCM coding */ 84 OMX_AUDIO_CodingADPCM, /**< Any variant of ADPCM encoded data */ 85 OMX_AUDIO_CodingAMR, /**< Any variant of AMR encoded data */ 86 OMX_AUDIO_CodingGSMFR, /**< Any variant of GSM fullrate (i.e. GSM610) */ 87 OMX_AUDIO_CodingGSMEFR, /**< Any variant of GSM Enhanced Fullrate encoded data*/ 88 OMX_AUDIO_CodingGSMHR, /**< Any variant of GSM Halfrate encoded data */ 89 OMX_AUDIO_CodingPDCFR, /**< Any variant of PDC Fullrate encoded data */ 90 OMX_AUDIO_CodingPDCEFR, /**< Any variant of PDC Enhanced Fullrate encoded data */ 91 OMX_AUDIO_CodingPDCHR, /**< Any variant of PDC Halfrate encoded data */ 92 OMX_AUDIO_CodingTDMAFR, /**< Any variant of TDMA Fullrate encoded data (TIA/EIA-136-420) */ 93 OMX_AUDIO_CodingTDMAEFR, /**< Any variant of TDMA Enhanced Fullrate encoded data (TIA/EIA-136-410) */ 94 OMX_AUDIO_CodingQCELP8, /**< Any variant of QCELP 8kbps encoded data */ 95 OMX_AUDIO_CodingQCELP13, /**< Any variant of QCELP 13kbps encoded data */ 96 OMX_AUDIO_CodingEVRC, /**< Any variant of EVRC encoded data */ 97 OMX_AUDIO_CodingSMV, /**< Any variant of SMV encoded data */ 98 OMX_AUDIO_CodingG711, /**< Any variant of G.711 encoded data */ 99 OMX_AUDIO_CodingG723, /**< Any variant of G.723 dot 1 encoded data */ 100 OMX_AUDIO_CodingG726, /**< Any variant of G.726 encoded data */ 101 OMX_AUDIO_CodingG729, /**< Any variant of G.729 encoded data */ 102 OMX_AUDIO_CodingAAC, /**< Any variant of AAC encoded data */ 103 OMX_AUDIO_CodingMP3, /**< Any variant of MP3 encoded data */ 104 OMX_AUDIO_CodingSBC, /**< Any variant of SBC encoded data */ 105 OMX_AUDIO_CodingVORBIS, /**< Any variant of VORBIS encoded data */ 106 OMX_AUDIO_CodingWMA, /**< Any variant of WMA encoded data */ 107 OMX_AUDIO_CodingRA, /**< Any variant of RA encoded data */ 108 OMX_AUDIO_CodingMIDI, /**< Any variant of MIDI encoded data */ 109 OMX_AUDIO_CodingKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 110 OMX_AUDIO_CodingVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 111 OMX_AUDIO_CodingMax = 0x7FFFFFFF 112 } OMX_AUDIO_CODINGTYPE; 113 114 115 /** The PortDefinition structure is used to define all of the parameters 116 * necessary for the compliant component to setup an input or an output audio 117 * path. If additional information is needed to define the parameters of the 118 * port (such as frequency), additional structures must be sent such as the 119 * OMX_AUDIO_PARAM_PCMMODETYPE structure to supply the extra parameters for the port. 120 */ 121 typedef struct OMX_AUDIO_PORTDEFINITIONTYPE { 122 OMX_STRING cMIMEType; /**< MIME type of data for the port */ 123 OMX_NATIVE_DEVICETYPE pNativeRender; /** < platform specific reference 124 for an output device, 125 otherwise this field is 0 */ 126 OMX_BOOL bFlagErrorConcealment; /**< Turns on error concealment if it is 127 supported by the OMX component */ 128 OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this 129 port (e.g. PCM, AMR, MP3, etc) */ 130 } OMX_AUDIO_PORTDEFINITIONTYPE; 131 132 133 /** Port format parameter. This structure is used to enumerate 134 * the various data input/output format supported by the port. 135 */ 136 typedef struct OMX_AUDIO_PARAM_PORTFORMATTYPE { 137 OMX_U32 nSize; /**< size of the structure in bytes */ 138 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 139 OMX_U32 nPortIndex; /**< Indicates which port to set */ 140 OMX_U32 nIndex; /**< Indicates the enumeration index for the format from 0x0 to N-1 */ 141 OMX_AUDIO_CODINGTYPE eEncoding; /**< Type of data expected for this port (e.g. PCM, AMR, MP3, etc) */ 142 } OMX_AUDIO_PARAM_PORTFORMATTYPE; 143 144 145 /** PCM mode type */ 146 typedef enum OMX_AUDIO_PCMMODETYPE { 147 OMX_AUDIO_PCMModeLinear = 0, /**< Linear PCM encoded data */ 148 OMX_AUDIO_PCMModeALaw, /**< A law PCM encoded data (G.711) */ 149 OMX_AUDIO_PCMModeMULaw, /**< Mu law PCM encoded data (G.711) */ 150 OMX_AUDIO_PCMModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 151 OMX_AUDIO_PCMModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 152 OMX_AUDIO_PCMModeMax = 0x7FFFFFFF 153 } OMX_AUDIO_PCMMODETYPE; 154 155 156 typedef enum OMX_AUDIO_CHANNELTYPE { 157 OMX_AUDIO_ChannelNone = 0x0, /**< Unused or empty */ 158 OMX_AUDIO_ChannelLF = 0x1, /**< Left front */ 159 OMX_AUDIO_ChannelRF = 0x2, /**< Right front */ 160 OMX_AUDIO_ChannelCF = 0x3, /**< Center front */ 161 OMX_AUDIO_ChannelLS = 0x4, /**< Left surround */ 162 OMX_AUDIO_ChannelRS = 0x5, /**< Right surround */ 163 OMX_AUDIO_ChannelLFE = 0x6, /**< Low frequency effects */ 164 OMX_AUDIO_ChannelCS = 0x7, /**< Back surround */ 165 OMX_AUDIO_ChannelLR = 0x8, /**< Left rear. */ 166 OMX_AUDIO_ChannelRR = 0x9, /**< Right rear. */ 167 OMX_AUDIO_ChannelKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 168 OMX_AUDIO_ChannelVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 169 OMX_AUDIO_ChannelMax = 0x7FFFFFFF 170 } OMX_AUDIO_CHANNELTYPE; 171 172 #define OMX_AUDIO_MAXCHANNELS 16 /**< maximum number distinct audio channels that a buffer may contain */ 173 #define OMX_MIN_PCMPAYLOAD_MSEC 5 /**< Minimum audio buffer payload size for uncompressed (PCM) audio */ 174 175 /** PCM format description */ 176 typedef struct OMX_AUDIO_PARAM_PCMMODETYPE { 177 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 178 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 179 OMX_U32 nPortIndex; /**< port that this structure applies to */ 180 OMX_U32 nChannels; /**< Number of channels (e.g. 2 for stereo) */ 181 OMX_NUMERICALDATATYPE eNumData; /**< indicates PCM data as signed or unsigned */ 182 OMX_ENDIANTYPE eEndian; /**< indicates PCM data as little or big endian */ 183 OMX_BOOL bInterleaved; /**< True for normal interleaved data; false for 184 non-interleaved data (e.g. block data) */ 185 OMX_U32 nBitPerSample; /**< Bit per sample */ 186 OMX_U32 nSamplingRate; /**< Sampling rate of the source data. Use 0 for 187 variable or unknown sampling rate. */ 188 OMX_AUDIO_PCMMODETYPE ePCMMode; /**< PCM mode enumeration */ 189 OMX_AUDIO_CHANNELTYPE eChannelMapping[OMX_AUDIO_MAXCHANNELS]; /**< Slot i contains channel defined by eChannelMap[i] */ 190 191 } OMX_AUDIO_PARAM_PCMMODETYPE; 192 193 194 /** Audio channel mode. This is used by both AAC and MP3, although the names are more appropriate 195 * for the MP3. For example, JointStereo for MP3 is CouplingChannels for AAC. 196 */ 197 typedef enum OMX_AUDIO_CHANNELMODETYPE { 198 OMX_AUDIO_ChannelModeStereo = 0, /**< 2 channels, the bitrate allocation between those 199 two channels changes accordingly to each channel information */ 200 OMX_AUDIO_ChannelModeJointStereo, /**< mode that takes advantage of what is common between 201 2 channels for higher compression gain */ 202 OMX_AUDIO_ChannelModeDual, /**< 2 mono-channels, each channel is encoded with half 203 the bitrate of the overall bitrate */ 204 OMX_AUDIO_ChannelModeMono, /**< Mono channel mode */ 205 OMX_AUDIO_ChannelModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 206 OMX_AUDIO_ChannelModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 207 OMX_AUDIO_ChannelModeMax = 0x7FFFFFFF 208 } OMX_AUDIO_CHANNELMODETYPE; 209 210 211 typedef enum OMX_AUDIO_MP3STREAMFORMATTYPE { 212 OMX_AUDIO_MP3StreamFormatMP1Layer3 = 0, /**< MP3 Audio MPEG 1 Layer 3 Stream format */ 213 OMX_AUDIO_MP3StreamFormatMP2Layer3, /**< MP3 Audio MPEG 2 Layer 3 Stream format */ 214 OMX_AUDIO_MP3StreamFormatMP2_5Layer3, /**< MP3 Audio MPEG2.5 Layer 3 Stream format */ 215 OMX_AUDIO_MP3StreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 216 OMX_AUDIO_MP3StreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 217 OMX_AUDIO_MP3StreamFormatMax = 0x7FFFFFFF 218 } OMX_AUDIO_MP3STREAMFORMATTYPE; 219 220 /** MP3 params */ 221 typedef struct OMX_AUDIO_PARAM_MP3TYPE { 222 OMX_U32 nSize; /**< size of the structure in bytes */ 223 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 224 OMX_U32 nPortIndex; /**< port that this structure applies to */ 225 OMX_U32 nChannels; /**< Number of channels */ 226 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 227 rate or unknown bit rates */ 228 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 229 variable or unknown sampling rate. */ 230 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 231 limit the audio signal. Use 0 to let encoder decide */ 232 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 233 OMX_AUDIO_MP3STREAMFORMATTYPE eFormat; /**< MP3 stream format */ 234 } OMX_AUDIO_PARAM_MP3TYPE; 235 236 237 typedef enum OMX_AUDIO_AACSTREAMFORMATTYPE { 238 OMX_AUDIO_AACStreamFormatMP2ADTS = 0, /**< AAC Audio Data Transport Stream 2 format */ 239 OMX_AUDIO_AACStreamFormatMP4ADTS, /**< AAC Audio Data Transport Stream 4 format */ 240 OMX_AUDIO_AACStreamFormatMP4LOAS, /**< AAC Low Overhead Audio Stream format */ 241 OMX_AUDIO_AACStreamFormatMP4LATM, /**< AAC Low overhead Audio Transport Multiplex */ 242 OMX_AUDIO_AACStreamFormatADIF, /**< AAC Audio Data Interchange Format */ 243 OMX_AUDIO_AACStreamFormatMP4FF, /**< AAC inside MPEG-4/ISO File Format */ 244 OMX_AUDIO_AACStreamFormatRAW, /**< AAC Raw Format */ 245 OMX_AUDIO_AACStreamFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 246 OMX_AUDIO_AACStreamFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 247 OMX_AUDIO_AACStreamFormatMax = 0x7FFFFFFF 248 } OMX_AUDIO_AACSTREAMFORMATTYPE; 249 250 251 /** AAC mode type. Note that the term profile is used with the MPEG-2 252 * standard and the term object type and profile is used with MPEG-4 */ 253 typedef enum OMX_AUDIO_AACPROFILETYPE{ 254 OMX_AUDIO_AACObjectNull = 0, /**< Null, not used */ 255 OMX_AUDIO_AACObjectMain = 1, /**< AAC Main object */ 256 OMX_AUDIO_AACObjectLC, /**< AAC Low Complexity object (AAC profile) */ 257 OMX_AUDIO_AACObjectSSR, /**< AAC Scalable Sample Rate object */ 258 OMX_AUDIO_AACObjectLTP, /**< AAC Long Term Prediction object */ 259 OMX_AUDIO_AACObjectHE, /**< AAC High Efficiency (object type SBR, HE-AAC profile) */ 260 OMX_AUDIO_AACObjectScalable, /**< AAC Scalable object */ 261 OMX_AUDIO_AACObjectERLC = 17, /**< ER AAC Low Complexity object (Error Resilient AAC-LC) */ 262 OMX_AUDIO_AACObjectLD = 23, /**< AAC Low Delay object (Error Resilient) */ 263 OMX_AUDIO_AACObjectHE_PS = 29, /**< AAC High Efficiency with Parametric Stereo coding (HE-AAC v2, object type PS) */ 264 OMX_AUDIO_AACObjectKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 265 OMX_AUDIO_AACObjectVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 266 OMX_AUDIO_AACObjectMax = 0x7FFFFFFF 267 } OMX_AUDIO_AACPROFILETYPE; 268 269 270 /** AAC tool usage (for nAACtools in OMX_AUDIO_PARAM_AACPROFILETYPE). 271 * Required for encoder configuration and optional as decoder info output. 272 * For MP3, OMX_AUDIO_CHANNELMODETYPE is sufficient. */ 273 #define OMX_AUDIO_AACToolNone 0x00000000 /**< no AAC tools allowed (encoder config) or active (decoder info output) */ 274 #define OMX_AUDIO_AACToolMS 0x00000001 /**< MS: Mid/side joint coding tool allowed or active */ 275 #define OMX_AUDIO_AACToolIS 0x00000002 /**< IS: Intensity stereo tool allowed or active */ 276 #define OMX_AUDIO_AACToolTNS 0x00000004 /**< TNS: Temporal Noise Shaping tool allowed or active */ 277 #define OMX_AUDIO_AACToolPNS 0x00000008 /**< PNS: MPEG-4 Perceptual Noise substitution tool allowed or active */ 278 #define OMX_AUDIO_AACToolLTP 0x00000010 /**< LTP: MPEG-4 Long Term Prediction tool allowed or active */ 279 #define OMX_AUDIO_AACToolAll 0x7FFFFFFF /**< all AAC tools allowed or active (*/ 280 281 /** MPEG-4 AAC error resilience (ER) tool usage (for nAACERtools in OMX_AUDIO_PARAM_AACPROFILETYPE). 282 * Required for ER encoder configuration and optional as decoder info output */ 283 #define OMX_AUDIO_AACERNone 0x00000000 /**< no AAC ER tools allowed/used */ 284 #define OMX_AUDIO_AACERVCB11 0x00000001 /**< VCB11: Virtual Code Books for AAC section data */ 285 #define OMX_AUDIO_AACERRVLC 0x00000002 /**< RVLC: Reversible Variable Length Coding */ 286 #define OMX_AUDIO_AACERHCR 0x00000004 /**< HCR: Huffman Codeword Reordering */ 287 #define OMX_AUDIO_AACERAll 0x7FFFFFFF /**< all AAC ER tools allowed/used */ 288 289 290 /** AAC params */ 291 typedef struct OMX_AUDIO_PARAM_AACPROFILETYPE { 292 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 293 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 294 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 295 OMX_U32 nChannels; /**< Number of channels */ 296 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 297 variable or unknown sampling rate. */ 298 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 299 rate or unknown bit rates */ 300 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 301 limit the audio signal. Use 0 to let encoder decide */ 302 OMX_U32 nFrameLength; /**< Frame length (in audio samples per channel) of the codec. 303 Can be 1024 or 960 (AAC-LC), 2048 (HE-AAC), 480 or 512 (AAC-LD). 304 Use 0 to let encoder decide */ 305 OMX_U32 nAACtools; /**< AAC tool usage */ 306 OMX_U32 nAACERtools; /**< MPEG-4 AAC error resilience tool usage */ 307 OMX_AUDIO_AACPROFILETYPE eAACProfile; /**< AAC profile enumeration */ 308 OMX_AUDIO_AACSTREAMFORMATTYPE eAACStreamFormat; /**< AAC stream format enumeration */ 309 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 310 } OMX_AUDIO_PARAM_AACPROFILETYPE; 311 312 313 /** VORBIS params */ 314 typedef struct OMX_AUDIO_PARAM_VORBISTYPE { 315 OMX_U32 nSize; /**< size of the structure in bytes */ 316 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 317 OMX_U32 nPortIndex; /**< port that this structure applies to */ 318 OMX_U32 nChannels; /**< Number of channels */ 319 OMX_U32 nBitRate; /**< Bit rate of the encoded data data. Use 0 for variable 320 rate or unknown bit rates. Encoding is set to the 321 bitrate closest to specified value (in bps) */ 322 OMX_U32 nMinBitRate; /**< Sets minimum bitrate (in bps). */ 323 OMX_U32 nMaxBitRate; /**< Sets maximum bitrate (in bps). */ 324 325 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 326 variable or unknown sampling rate. */ 327 OMX_U32 nAudioBandWidth; /**< Audio band width (in Hz) to which an encoder should 328 limit the audio signal. Use 0 to let encoder decide */ 329 OMX_S32 nQuality; /**< Sets encoding quality to n, between -1 (low) and 10 (high). 330 In the default mode of operation, teh quality level is 3. 331 Normal quality range is 0 - 10. */ 332 OMX_BOOL bManaged; /**< Set bitrate management mode. This turns off the 333 normal VBR encoding, but allows hard or soft bitrate 334 constraints to be enforced by the encoder. This mode can 335 be slower, and may also be lower quality. It is 336 primarily useful for streaming. */ 337 OMX_BOOL bDownmix; /**< Downmix input from stereo to mono (has no effect on 338 non-stereo streams). Useful for lower-bitrate encoding. */ 339 } OMX_AUDIO_PARAM_VORBISTYPE; 340 341 342 /** WMA Version */ 343 typedef enum OMX_AUDIO_WMAFORMATTYPE { 344 OMX_AUDIO_WMAFormatUnused = 0, /**< format unused or unknown */ 345 OMX_AUDIO_WMAFormat7, /**< Windows Media Audio format 7 */ 346 OMX_AUDIO_WMAFormat8, /**< Windows Media Audio format 8 */ 347 OMX_AUDIO_WMAFormat9, /**< Windows Media Audio format 9 */ 348 OMX_AUDIO_WMAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 349 OMX_AUDIO_WMAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 350 OMX_AUDIO_WMAFormatMax = 0x7FFFFFFF 351 } OMX_AUDIO_WMAFORMATTYPE; 352 353 354 /** WMA Profile */ 355 typedef enum OMX_AUDIO_WMAPROFILETYPE { 356 OMX_AUDIO_WMAProfileUnused = 0, /**< profile unused or unknown */ 357 OMX_AUDIO_WMAProfileL1, /**< Windows Media audio version 9 profile L1 */ 358 OMX_AUDIO_WMAProfileL2, /**< Windows Media audio version 9 profile L2 */ 359 OMX_AUDIO_WMAProfileL3, /**< Windows Media audio version 9 profile L3 */ 360 OMX_AUDIO_WMAProfileKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 361 OMX_AUDIO_WMAProfileVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 362 OMX_AUDIO_WMAProfileMax = 0x7FFFFFFF 363 } OMX_AUDIO_WMAPROFILETYPE; 364 365 366 /** WMA params */ 367 typedef struct OMX_AUDIO_PARAM_WMATYPE { 368 OMX_U32 nSize; /**< size of the structure in bytes */ 369 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 370 OMX_U32 nPortIndex; /**< port that this structure applies to */ 371 OMX_U16 nChannels; /**< Number of channels */ 372 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 373 rate or unknown bit rates */ 374 OMX_AUDIO_WMAFORMATTYPE eFormat; /**< Version of WMA stream / data */ 375 OMX_AUDIO_WMAPROFILETYPE eProfile; /**< Profile of WMA stream / data */ 376 OMX_U32 nSamplingRate; /**< Sampling rate of the source data */ 377 OMX_U16 nBlockAlign; /**< is the block alignment, or block size, in bytes of the audio codec */ 378 OMX_U16 nEncodeOptions; /**< WMA Type-specific data */ 379 OMX_U32 nSuperBlockAlign; /**< WMA Type-specific data */ 380 } OMX_AUDIO_PARAM_WMATYPE; 381 382 /** 383 * RealAudio format 384 */ 385 typedef enum OMX_AUDIO_RAFORMATTYPE { 386 OMX_AUDIO_RAFormatUnused = 0, /**< Format unused or unknown */ 387 OMX_AUDIO_RA8, /**< RealAudio 8 codec */ 388 OMX_AUDIO_RA9, /**< RealAudio 9 codec */ 389 OMX_AUDIO_RA10_AAC, /**< MPEG-4 AAC codec for bitrates of more than 128kbps */ 390 OMX_AUDIO_RA10_CODEC, /**< RealAudio codec for bitrates less than 128 kbps */ 391 OMX_AUDIO_RA10_LOSSLESS, /**< RealAudio Lossless */ 392 OMX_AUDIO_RA10_MULTICHANNEL, /**< RealAudio Multichannel */ 393 OMX_AUDIO_RA10_VOICE, /**< RealAudio Voice for bitrates below 15 kbps */ 394 OMX_AUDIO_RAFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 395 OMX_AUDIO_RAFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 396 OMX_VIDEO_RAFormatMax = 0x7FFFFFFF 397 } OMX_AUDIO_RAFORMATTYPE; 398 399 /** RA (Real Audio) params */ 400 typedef struct OMX_AUDIO_PARAM_RATYPE { 401 OMX_U32 nSize; /**< Size of this structure, in Bytes */ 402 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 403 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 404 OMX_U32 nChannels; /**< Number of channels */ 405 OMX_U32 nSamplingRate; /**< is the sampling rate of the source data */ 406 OMX_U32 nBitsPerFrame; /**< is the value for bits per frame */ 407 OMX_U32 nSamplePerFrame; /**< is the value for samples per frame */ 408 OMX_U32 nCouplingQuantBits; /**< is the number of coupling quantization bits in the stream */ 409 OMX_U32 nCouplingStartRegion; /**< is the coupling start region in the stream */ 410 OMX_U32 nNumRegions; /**< is the number of regions value */ 411 OMX_AUDIO_RAFORMATTYPE eFormat; /**< is the RealAudio audio format */ 412 } OMX_AUDIO_PARAM_RATYPE; 413 414 415 /** SBC Allocation Method Type */ 416 typedef enum OMX_AUDIO_SBCALLOCMETHODTYPE { 417 OMX_AUDIO_SBCAllocMethodLoudness, /**< Loudness allocation method */ 418 OMX_AUDIO_SBCAllocMethodSNR, /**< SNR allocation method */ 419 OMX_AUDIO_SBCAllocMethodKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 420 OMX_AUDIO_SBCAllocMethodVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 421 OMX_AUDIO_SBCAllocMethodMax = 0x7FFFFFFF 422 } OMX_AUDIO_SBCALLOCMETHODTYPE; 423 424 425 /** SBC params */ 426 typedef struct OMX_AUDIO_PARAM_SBCTYPE { 427 OMX_U32 nSize; /**< size of the structure in bytes */ 428 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 429 OMX_U32 nPortIndex; /**< port that this structure applies to */ 430 OMX_U32 nChannels; /**< Number of channels */ 431 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 432 rate or unknown bit rates */ 433 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 434 variable or unknown sampling rate. */ 435 OMX_U32 nBlocks; /**< Number of blocks */ 436 OMX_U32 nSubbands; /**< Number of subbands */ 437 OMX_U32 nBitPool; /**< Bitpool value */ 438 OMX_BOOL bEnableBitrate; /**< Use bitrate value instead of bitpool */ 439 OMX_AUDIO_CHANNELMODETYPE eChannelMode; /**< Channel mode enumeration */ 440 OMX_AUDIO_SBCALLOCMETHODTYPE eSBCAllocType; /**< SBC Allocation method type */ 441 } OMX_AUDIO_PARAM_SBCTYPE; 442 443 444 /** ADPCM stream format parameters */ 445 typedef struct OMX_AUDIO_PARAM_ADPCMTYPE { 446 OMX_U32 nSize; /**< size of the structure in bytes */ 447 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 448 OMX_U32 nPortIndex; /**< port that this structure applies to */ 449 OMX_U32 nChannels; /**< Number of channels in the data stream (not 450 necessarily the same as the number of channels 451 to be rendered. */ 452 OMX_U32 nBitsPerSample; /**< Number of bits in each sample */ 453 OMX_U32 nSampleRate; /**< Sampling rate of the source data. Use 0 for 454 variable or unknown sampling rate. */ 455 } OMX_AUDIO_PARAM_ADPCMTYPE; 456 457 458 /** G723 rate */ 459 typedef enum OMX_AUDIO_G723RATE { 460 OMX_AUDIO_G723ModeUnused = 0, /**< AMRNB Mode unused / unknown */ 461 OMX_AUDIO_G723ModeLow, /**< 5300 bps */ 462 OMX_AUDIO_G723ModeHigh, /**< 6300 bps */ 463 OMX_AUDIO_G723ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 464 OMX_AUDIO_G723ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 465 OMX_AUDIO_G723ModeMax = 0x7FFFFFFF 466 } OMX_AUDIO_G723RATE; 467 468 469 /** G723 - Sample rate must be 8 KHz */ 470 typedef struct OMX_AUDIO_PARAM_G723TYPE { 471 OMX_U32 nSize; /**< size of the structure in bytes */ 472 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 473 OMX_U32 nPortIndex; /**< port that this structure applies to */ 474 OMX_U32 nChannels; /**< Number of channels in the data stream (not 475 necessarily the same as the number of channels 476 to be rendered. */ 477 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 478 OMX_AUDIO_G723RATE eBitRate; /**< todo: Should this be moved to a config? */ 479 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 480 OMX_BOOL bPostFilter; /**< Enable Post Filter */ 481 } OMX_AUDIO_PARAM_G723TYPE; 482 483 484 /** ITU G726 (ADPCM) rate */ 485 typedef enum OMX_AUDIO_G726MODE { 486 OMX_AUDIO_G726ModeUnused = 0, /**< G726 Mode unused / unknown */ 487 OMX_AUDIO_G726Mode16, /**< 16 kbps */ 488 OMX_AUDIO_G726Mode24, /**< 24 kbps */ 489 OMX_AUDIO_G726Mode32, /**< 32 kbps, most common rate, also G721 */ 490 OMX_AUDIO_G726Mode40, /**< 40 kbps */ 491 OMX_AUDIO_G726ModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 492 OMX_AUDIO_G726ModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 493 OMX_AUDIO_G726ModeMax = 0x7FFFFFFF 494 } OMX_AUDIO_G726MODE; 495 496 497 /** G.726 stream format parameters - must be at 8KHz */ 498 typedef struct OMX_AUDIO_PARAM_G726TYPE { 499 OMX_U32 nSize; /**< size of the structure in bytes */ 500 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 501 OMX_U32 nPortIndex; /**< port that this structure applies to */ 502 OMX_U32 nChannels; /**< Number of channels in the data stream (not 503 necessarily the same as the number of channels 504 to be rendered. */ 505 OMX_AUDIO_G726MODE eG726Mode; 506 } OMX_AUDIO_PARAM_G726TYPE; 507 508 509 /** G729 coder type */ 510 typedef enum OMX_AUDIO_G729TYPE { 511 OMX_AUDIO_G729 = 0, /**< ITU G.729 encoded data */ 512 OMX_AUDIO_G729A, /**< ITU G.729 annex A encoded data */ 513 OMX_AUDIO_G729B, /**< ITU G.729 with annex B encoded data */ 514 OMX_AUDIO_G729AB, /**< ITU G.729 annexes A and B encoded data */ 515 OMX_AUDIO_G729KhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 516 OMX_AUDIO_G729VendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 517 OMX_AUDIO_G729Max = 0x7FFFFFFF 518 } OMX_AUDIO_G729TYPE; 519 520 521 /** G729 stream format parameters - fixed 6KHz sample rate */ 522 typedef struct OMX_AUDIO_PARAM_G729TYPE { 523 OMX_U32 nSize; /**< size of the structure in bytes */ 524 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 525 OMX_U32 nPortIndex; /**< port that this structure applies to */ 526 OMX_U32 nChannels; /**< Number of channels in the data stream (not 527 necessarily the same as the number of channels 528 to be rendered. */ 529 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 530 OMX_AUDIO_G729TYPE eBitType; 531 } OMX_AUDIO_PARAM_G729TYPE; 532 533 534 /** AMR Frame format */ 535 typedef enum OMX_AUDIO_AMRFRAMEFORMATTYPE { 536 OMX_AUDIO_AMRFrameFormatConformance = 0, /**< Frame Format is AMR Conformance 537 (Standard) Format */ 538 OMX_AUDIO_AMRFrameFormatIF1, /**< Frame Format is AMR Interface 539 Format 1 */ 540 OMX_AUDIO_AMRFrameFormatIF2, /**< Frame Format is AMR Interface 541 Format 2*/ 542 OMX_AUDIO_AMRFrameFormatFSF, /**< Frame Format is AMR File Storage 543 Format */ 544 OMX_AUDIO_AMRFrameFormatRTPPayload, /**< Frame Format is AMR Real-Time 545 Transport Protocol Payload Format */ 546 OMX_AUDIO_AMRFrameFormatITU, /**< Frame Format is ITU Format (added at Motorola request) */ 547 OMX_AUDIO_AMRFrameFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 548 OMX_AUDIO_AMRFrameFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 549 OMX_AUDIO_AMRFrameFormatMax = 0x7FFFFFFF 550 } OMX_AUDIO_AMRFRAMEFORMATTYPE; 551 552 553 /** AMR band mode */ 554 typedef enum OMX_AUDIO_AMRBANDMODETYPE { 555 OMX_AUDIO_AMRBandModeUnused = 0, /**< AMRNB Mode unused / unknown */ 556 OMX_AUDIO_AMRBandModeNB0, /**< AMRNB Mode 0 = 4750 bps */ 557 OMX_AUDIO_AMRBandModeNB1, /**< AMRNB Mode 1 = 5150 bps */ 558 OMX_AUDIO_AMRBandModeNB2, /**< AMRNB Mode 2 = 5900 bps */ 559 OMX_AUDIO_AMRBandModeNB3, /**< AMRNB Mode 3 = 6700 bps */ 560 OMX_AUDIO_AMRBandModeNB4, /**< AMRNB Mode 4 = 7400 bps */ 561 OMX_AUDIO_AMRBandModeNB5, /**< AMRNB Mode 5 = 7950 bps */ 562 OMX_AUDIO_AMRBandModeNB6, /**< AMRNB Mode 6 = 10200 bps */ 563 OMX_AUDIO_AMRBandModeNB7, /**< AMRNB Mode 7 = 12200 bps */ 564 OMX_AUDIO_AMRBandModeWB0, /**< AMRWB Mode 0 = 6600 bps */ 565 OMX_AUDIO_AMRBandModeWB1, /**< AMRWB Mode 1 = 8850 bps */ 566 OMX_AUDIO_AMRBandModeWB2, /**< AMRWB Mode 2 = 12650 bps */ 567 OMX_AUDIO_AMRBandModeWB3, /**< AMRWB Mode 3 = 14250 bps */ 568 OMX_AUDIO_AMRBandModeWB4, /**< AMRWB Mode 4 = 15850 bps */ 569 OMX_AUDIO_AMRBandModeWB5, /**< AMRWB Mode 5 = 18250 bps */ 570 OMX_AUDIO_AMRBandModeWB6, /**< AMRWB Mode 6 = 19850 bps */ 571 OMX_AUDIO_AMRBandModeWB7, /**< AMRWB Mode 7 = 23050 bps */ 572 OMX_AUDIO_AMRBandModeWB8, /**< AMRWB Mode 8 = 23850 bps */ 573 OMX_AUDIO_AMRBandModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 574 OMX_AUDIO_AMRBandModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 575 OMX_AUDIO_AMRBandModeMax = 0x7FFFFFFF 576 } OMX_AUDIO_AMRBANDMODETYPE; 577 578 579 /** AMR Discontinuous Transmission mode */ 580 typedef enum OMX_AUDIO_AMRDTXMODETYPE { 581 OMX_AUDIO_AMRDTXModeOff = 0, /**< AMR Discontinuous Transmission Mode is disabled */ 582 OMX_AUDIO_AMRDTXModeOnVAD1, /**< AMR Discontinuous Transmission Mode using 583 Voice Activity Detector 1 (VAD1) is enabled */ 584 OMX_AUDIO_AMRDTXModeOnVAD2, /**< AMR Discontinuous Transmission Mode using 585 Voice Activity Detector 2 (VAD2) is enabled */ 586 OMX_AUDIO_AMRDTXModeOnAuto, /**< The codec will automatically select between 587 Off, VAD1 or VAD2 modes */ 588 589 OMX_AUDIO_AMRDTXasEFR, /**< DTX as EFR instead of AMR standard (3GPP 26.101, frame type =8,9,10) */ 590 591 OMX_AUDIO_AMRDTXModeKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 592 OMX_AUDIO_AMRDTXModeVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 593 OMX_AUDIO_AMRDTXModeMax = 0x7FFFFFFF 594 } OMX_AUDIO_AMRDTXMODETYPE; 595 596 597 /** AMR params */ 598 typedef struct OMX_AUDIO_PARAM_AMRTYPE { 599 OMX_U32 nSize; /**< size of the structure in bytes */ 600 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 601 OMX_U32 nPortIndex; /**< port that this structure applies to */ 602 OMX_U32 nChannels; /**< Number of channels */ 603 OMX_U32 nBitRate; /**< Bit rate read only field */ 604 OMX_AUDIO_AMRBANDMODETYPE eAMRBandMode; /**< AMR Band Mode enumeration */ 605 OMX_AUDIO_AMRDTXMODETYPE eAMRDTXMode; /**< AMR DTX Mode enumeration */ 606 OMX_AUDIO_AMRFRAMEFORMATTYPE eAMRFrameFormat; /**< AMR frame format enumeration */ 607 } OMX_AUDIO_PARAM_AMRTYPE; 608 609 610 /** GSM_FR (ETSI 06.10, 3GPP 46.010) stream format parameters */ 611 typedef struct OMX_AUDIO_PARAM_GSMFRTYPE { 612 OMX_U32 nSize; /**< size of the structure in bytes */ 613 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 614 OMX_U32 nPortIndex; /**< port that this structure applies to */ 615 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 616 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 617 } OMX_AUDIO_PARAM_GSMFRTYPE; 618 619 620 /** GSM-HR (ETSI 06.20, 3GPP 46.020) stream format parameters */ 621 typedef struct OMX_AUDIO_PARAM_GSMHRTYPE { 622 OMX_U32 nSize; /**< size of the structure in bytes */ 623 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 624 OMX_U32 nPortIndex; /**< port that this structure applies to */ 625 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 626 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 627 } OMX_AUDIO_PARAM_GSMHRTYPE; 628 629 630 /** GSM-EFR (ETSI 06.60, 3GPP 46.060) stream format parameters */ 631 typedef struct OMX_AUDIO_PARAM_GSMEFRTYPE { 632 OMX_U32 nSize; /**< size of the structure in bytes */ 633 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 634 OMX_U32 nPortIndex; /**< port that this structure applies to */ 635 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 636 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 637 } OMX_AUDIO_PARAM_GSMEFRTYPE; 638 639 640 /** TDMA FR (TIA/EIA-136-420, VSELP 7.95kbps coder) stream format parameters */ 641 typedef struct OMX_AUDIO_PARAM_TDMAFRTYPE { 642 OMX_U32 nSize; /**< size of the structure in bytes */ 643 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 644 OMX_U32 nPortIndex; /**< port that this structure applies to */ 645 OMX_U32 nChannels; /**< Number of channels in the data stream (not 646 necessarily the same as the number of channels 647 to be rendered. */ 648 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 649 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 650 } OMX_AUDIO_PARAM_TDMAFRTYPE; 651 652 653 /** TDMA EFR (TIA/EIA-136-410, ACELP 7.4kbps coder) stream format parameters */ 654 typedef struct OMX_AUDIO_PARAM_TDMAEFRTYPE { 655 OMX_U32 nSize; /**< size of the structure in bytes */ 656 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 657 OMX_U32 nPortIndex; /**< port that this structure applies to */ 658 OMX_U32 nChannels; /**< Number of channels in the data stream (not 659 necessarily the same as the number of channels 660 to be rendered. */ 661 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 662 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 663 } OMX_AUDIO_PARAM_TDMAEFRTYPE; 664 665 666 /** PDC FR ( RCR-27, VSELP 6.7kbps coder) stream format parameters */ 667 typedef struct OMX_AUDIO_PARAM_PDCFRTYPE { 668 OMX_U32 nSize; /**< size of the structure in bytes */ 669 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 670 OMX_U32 nPortIndex; /**< port that this structure applies to */ 671 OMX_U32 nChannels; /**< Number of channels in the data stream (not 672 necessarily the same as the number of channels 673 to be rendered. */ 674 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 675 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 676 } OMX_AUDIO_PARAM_PDCFRTYPE; 677 678 679 /** PDC EFR ( RCR-27, ACELP 6.7kbps coder) stream format parameters */ 680 typedef struct OMX_AUDIO_PARAM_PDCEFRTYPE { 681 OMX_U32 nSize; /**< size of the structure in bytes */ 682 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 683 OMX_U32 nPortIndex; /**< port that this structure applies to */ 684 OMX_U32 nChannels; /**< Number of channels in the data stream (not 685 necessarily the same as the number of channels 686 to be rendered. */ 687 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 688 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 689 } OMX_AUDIO_PARAM_PDCEFRTYPE; 690 691 /** PDC HR ( RCR-27, PSI-CELP 3.45kbps coder) stream format parameters */ 692 typedef struct OMX_AUDIO_PARAM_PDCHRTYPE { 693 OMX_U32 nSize; /**< size of the structure in bytes */ 694 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 695 OMX_U32 nPortIndex; /**< port that this structure applies to */ 696 OMX_U32 nChannels; /**< Number of channels in the data stream (not 697 necessarily the same as the number of channels 698 to be rendered. */ 699 OMX_BOOL bDTX; /**< Enable Discontinuous Transmisssion */ 700 OMX_BOOL bHiPassFilter; /**< Enable High Pass Filter */ 701 } OMX_AUDIO_PARAM_PDCHRTYPE; 702 703 704 /** CDMA Rate types */ 705 typedef enum OMX_AUDIO_CDMARATETYPE { 706 OMX_AUDIO_CDMARateBlank = 0, /**< CDMA encoded frame is blank */ 707 OMX_AUDIO_CDMARateFull, /**< CDMA encoded frame in full rate */ 708 OMX_AUDIO_CDMARateHalf, /**< CDMA encoded frame in half rate */ 709 OMX_AUDIO_CDMARateQuarter, /**< CDMA encoded frame in quarter rate */ 710 OMX_AUDIO_CDMARateEighth, /**< CDMA encoded frame in eighth rate (DTX)*/ 711 OMX_AUDIO_CDMARateErasure, /**< CDMA erasure frame */ 712 OMX_AUDIO_CDMARateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 713 OMX_AUDIO_CDMARateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 714 OMX_AUDIO_CDMARateMax = 0x7FFFFFFF 715 } OMX_AUDIO_CDMARATETYPE; 716 717 718 /** QCELP8 (TIA/EIA-96, up to 8kbps coder) stream format parameters */ 719 typedef struct OMX_AUDIO_PARAM_QCELP8TYPE { 720 OMX_U32 nSize; /**< size of the structure in bytes */ 721 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 722 OMX_U32 nPortIndex; /**< port that this structure applies to */ 723 OMX_U32 nChannels; /**< Number of channels in the data stream (not 724 necessarily the same as the number of channels 725 to be rendered. */ 726 OMX_U32 nBitRate; /**< Bit rate of the input data. Use 0 for variable 727 rate or unknown bit rates */ 728 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 729 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 730 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 731 } OMX_AUDIO_PARAM_QCELP8TYPE; 732 733 734 /** QCELP13 ( CDMA, EIA/TIA-733, 13.3kbps coder) stream format parameters */ 735 typedef struct OMX_AUDIO_PARAM_QCELP13TYPE { 736 OMX_U32 nSize; /**< size of the structure in bytes */ 737 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 738 OMX_U32 nPortIndex; /**< port that this structure applies to */ 739 OMX_U32 nChannels; /**< Number of channels in the data stream (not 740 necessarily the same as the number of channels 741 to be rendered. */ 742 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 743 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 744 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 745 } OMX_AUDIO_PARAM_QCELP13TYPE; 746 747 748 /** EVRC ( CDMA, EIA/TIA-127, RCELP up to 8.55kbps coder) stream format parameters */ 749 typedef struct OMX_AUDIO_PARAM_EVRCTYPE { 750 OMX_U32 nSize; /**< size of the structure in bytes */ 751 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 752 OMX_U32 nPortIndex; /**< port that this structure applies to */ 753 OMX_U32 nChannels; /**< Number of channels in the data stream (not 754 necessarily the same as the number of channels 755 to be rendered. */ 756 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< actual Frame rate */ 757 OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ 758 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 */ 759 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 */ 760 OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter */ 761 OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ 762 OMX_BOOL bPostFilter; /**< Enable decoder's post Filter */ 763 } OMX_AUDIO_PARAM_EVRCTYPE; 764 765 766 /** SMV ( up to 8.55kbps coder) stream format parameters */ 767 typedef struct OMX_AUDIO_PARAM_SMVTYPE { 768 OMX_U32 nSize; /**< size of the structure in bytes */ 769 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 770 OMX_U32 nPortIndex; /**< port that this structure applies to */ 771 OMX_U32 nChannels; /**< Number of channels in the data stream (not 772 necessarily the same as the number of channels 773 to be rendered. */ 774 OMX_AUDIO_CDMARATETYPE eCDMARate; /**< Frame rate */ 775 OMX_BOOL bRATE_REDUCon; /**< RATE_REDUCtion is requested for this frame */ 776 OMX_U32 nMinBitRate; /**< minmal rate for the encoder = 1,2,3,4, default = 1 ??*/ 777 OMX_U32 nMaxBitRate; /**< maximal rate for the encoder = 1,2,3,4, default = 4 ??*/ 778 OMX_BOOL bHiPassFilter; /**< Enable encoder's High Pass Filter ??*/ 779 OMX_BOOL bNoiseSuppressor; /**< Enable encoder's noise suppressor pre-processing */ 780 OMX_BOOL bPostFilter; /**< Enable decoder's post Filter ??*/ 781 } OMX_AUDIO_PARAM_SMVTYPE; 782 783 784 /** MIDI Format 785 * @ingroup midi 786 */ 787 typedef enum OMX_AUDIO_MIDIFORMATTYPE 788 { 789 OMX_AUDIO_MIDIFormatUnknown = 0, /**< MIDI Format unknown or don't care */ 790 OMX_AUDIO_MIDIFormatSMF0, /**< Standard MIDI File Type 0 */ 791 OMX_AUDIO_MIDIFormatSMF1, /**< Standard MIDI File Type 1 */ 792 OMX_AUDIO_MIDIFormatSMF2, /**< Standard MIDI File Type 2 */ 793 OMX_AUDIO_MIDIFormatSPMIDI, /**< SP-MIDI */ 794 OMX_AUDIO_MIDIFormatXMF0, /**< eXtensible Music Format type 0 */ 795 OMX_AUDIO_MIDIFormatXMF1, /**< eXtensible Music Format type 1 */ 796 OMX_AUDIO_MIDIFormatMobileXMF, /**< Mobile XMF (eXtensible Music Format type 2) */ 797 OMX_AUDIO_MIDIFormatKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 798 OMX_AUDIO_MIDIFormatVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 799 OMX_AUDIO_MIDIFormatMax = 0x7FFFFFFF 800 } OMX_AUDIO_MIDIFORMATTYPE; 801 802 803 /** MIDI params 804 * @ingroup midi 805 */ 806 typedef struct OMX_AUDIO_PARAM_MIDITYPE { 807 OMX_U32 nSize; /**< size of the structure in bytes */ 808 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 809 OMX_U32 nPortIndex; /**< port that this structure applies to */ 810 OMX_U32 nFileSize; /**< size of the MIDI file in bytes, where the entire 811 MIDI file passed in, otherwise if 0x0, the MIDI data 812 is merged and streamed (instead of passed as an 813 entire MIDI file) */ 814 OMX_BU32 sMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic 815 voices. A value of zero indicates that the default 816 polyphony of the device is used */ 817 OMX_BOOL bLoadDefaultSound; /**< Whether to load default sound 818 bank at initialization */ 819 OMX_AUDIO_MIDIFORMATTYPE eMidiFormat; /**< Version of the MIDI file */ 820 } OMX_AUDIO_PARAM_MIDITYPE; 821 822 823 /** Type of the MIDI sound bank 824 * @ingroup midi 825 */ 826 typedef enum OMX_AUDIO_MIDISOUNDBANKTYPE { 827 OMX_AUDIO_MIDISoundBankUnused = 0, /**< unused/unknown soundbank type */ 828 OMX_AUDIO_MIDISoundBankDLS1, /**< DLS version 1 */ 829 OMX_AUDIO_MIDISoundBankDLS2, /**< DLS version 2 */ 830 OMX_AUDIO_MIDISoundBankMobileDLSBase, /**< Mobile DLS, using the base functionality */ 831 OMX_AUDIO_MIDISoundBankMobileDLSPlusOptions, /**< Mobile DLS, using the specification-defined optional feature set */ 832 OMX_AUDIO_MIDISoundBankKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 833 OMX_AUDIO_MIDISoundBankVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 834 OMX_AUDIO_MIDISoundBankMax = 0x7FFFFFFF 835 } OMX_AUDIO_MIDISOUNDBANKTYPE; 836 837 838 /** Bank Layout describes how bank MSB & LSB are used in the DLS instrument definitions sound bank 839 * @ingroup midi 840 */ 841 typedef enum OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE { 842 OMX_AUDIO_MIDISoundBankLayoutUnused = 0, /**< unused/unknown soundbank type */ 843 OMX_AUDIO_MIDISoundBankLayoutGM, /**< GS layout (based on bank MSB 0x00) */ 844 OMX_AUDIO_MIDISoundBankLayoutGM2, /**< General MIDI 2 layout (using MSB 0x78/0x79, LSB 0x00) */ 845 OMX_AUDIO_MIDISoundBankLayoutUser, /**< Does not conform to any bank numbering standards */ 846 OMX_AUDIO_MIDISoundBankLayoutKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 847 OMX_AUDIO_MIDISoundBankLayoutVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 848 OMX_AUDIO_MIDISoundBankLayoutMax = 0x7FFFFFFF 849 } OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE; 850 851 852 /** MIDI params to load/unload user soundbank 853 * @ingroup midi 854 */ 855 typedef struct OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE { 856 OMX_U32 nSize; /**< size of the structure in bytes */ 857 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 858 OMX_U32 nPortIndex; /**< port that this structure applies to */ 859 OMX_U32 nDLSIndex; /**< DLS file index to be loaded */ 860 OMX_U32 nDLSSize; /**< Size in bytes */ 861 OMX_PTR pDLSData; /**< Pointer to DLS file data */ 862 OMX_AUDIO_MIDISOUNDBANKTYPE eMidiSoundBank; /**< Midi sound bank type enumeration */ 863 OMX_AUDIO_MIDISOUNDBANKLAYOUTTYPE eMidiSoundBankLayout; /**< Midi sound bank layout enumeration */ 864 } OMX_AUDIO_PARAM_MIDILOADUSERSOUNDTYPE; 865 866 867 /** Structure for Live MIDI events and MIP messages. 868 * (MIP = Maximum Instantaneous Polyphony; part of the SP-MIDI standard.) 869 * @ingroup midi 870 */ 871 typedef struct OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE { 872 OMX_U32 nSize; /**< size of the structure in bytes */ 873 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 874 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 875 OMX_U32 nMidiEventSize; /**< Size of immediate MIDI events or MIP message in bytes */ 876 OMX_U8 nMidiEvents[1]; /**< MIDI event array to be rendered immediately, or an 877 array for the MIP message buffer, where the size is 878 indicated by nMidiEventSize */ 879 } OMX_AUDIO_CONFIG_MIDIIMMEDIATEEVENTTYPE; 880 881 882 /** MIDI sound bank/ program pair in a given channel 883 * @ingroup midi 884 */ 885 typedef struct OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE { 886 OMX_U32 nSize; /**< size of the structure in bytes */ 887 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 888 OMX_U32 nPortIndex; /**< Port that this structure applies to */ 889 OMX_U32 nChannel; /**< Valid channel values range from 1 to 16 */ 890 OMX_U16 nIDProgram; /**< Valid program ID range is 1 to 128 */ 891 OMX_U16 nIDSoundBank; /**< Sound bank ID */ 892 OMX_U32 nUserSoundBankIndex;/**< User soundbank index, easier to access soundbanks 893 by index if multiple banks are present */ 894 } OMX_AUDIO_CONFIG_MIDISOUNDBANKPROGRAMTYPE; 895 896 897 /** MIDI control 898 * @ingroup midi 899 */ 900 typedef struct OMX_AUDIO_CONFIG_MIDICONTROLTYPE { 901 OMX_U32 nSize; /**< size of the structure in bytes */ 902 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 903 OMX_U32 nPortIndex; /**< port that this structure applies to */ 904 OMX_BS32 sPitchTransposition; /**< Pitch transposition in semitones, stored as Q22.10 905 format based on JAVA MMAPI (JSR-135) requirement */ 906 OMX_BU32 sPlayBackRate; /**< Relative playback rate, stored as Q14.17 fixed-point 907 number based on JSR-135 requirement */ 908 OMX_BU32 sTempo ; /**< Tempo in beats per minute (BPM), stored as Q22.10 909 fixed-point number based on JSR-135 requirement */ 910 OMX_U32 nMaxPolyphony; /**< Specifies the maximum simultaneous polyphonic 911 voices. A value of zero indicates that the default 912 polyphony of the device is used */ 913 OMX_U32 nNumRepeat; /**< Number of times to repeat playback */ 914 OMX_U32 nStopTime; /**< Time in milliseconds to indicate when playback 915 will stop automatically. Set to zero if not used */ 916 OMX_U16 nChannelMuteMask; /**< 16 bit mask for channel mute status */ 917 OMX_U16 nChannelSoloMask; /**< 16 bit mask for channel solo status */ 918 OMX_U32 nTrack0031MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 0-31 */ 919 OMX_U32 nTrack3263MuteMask; /**< 32 bit mask for track mute status. Note: This is for tracks 32-63 */ 920 OMX_U32 nTrack0031SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 0-31 */ 921 OMX_U32 nTrack3263SoloMask; /**< 32 bit mask for track solo status. Note: This is for tracks 32-63 */ 922 923 } OMX_AUDIO_CONFIG_MIDICONTROLTYPE; 924 925 926 /** MIDI Playback States 927 * @ingroup midi 928 */ 929 typedef enum OMX_AUDIO_MIDIPLAYBACKSTATETYPE { 930 OMX_AUDIO_MIDIPlayBackStateUnknown = 0, /**< Unknown state or state does not map to 931 other defined states */ 932 OMX_AUDIO_MIDIPlayBackStateClosedEngaged, /**< No MIDI resource is currently open. 933 The MIDI engine is currently processing 934 MIDI events. */ 935 OMX_AUDIO_MIDIPlayBackStateParsing, /**< A MIDI resource is open and is being 936 primed. The MIDI engine is currently 937 processing MIDI events. */ 938 OMX_AUDIO_MIDIPlayBackStateOpenEngaged, /**< A MIDI resource is open and primed but 939 not playing. The MIDI engine is currently 940 processing MIDI events. The transition to 941 this state is only possible from the 942 OMX_AUDIO_MIDIPlayBackStatePlaying state, 943 when the 'playback head' reaches the end 944 of media data or the playback stops due 945 to stop time set.*/ 946 OMX_AUDIO_MIDIPlayBackStatePlaying, /**< A MIDI resource is open and currently 947 playing. The MIDI engine is currently 948 processing MIDI events.*/ 949 OMX_AUDIO_MIDIPlayBackStatePlayingPartially, /**< Best-effort playback due to SP-MIDI/DLS 950 resource constraints */ 951 OMX_AUDIO_MIDIPlayBackStatePlayingSilently, /**< Due to system resource constraints and 952 SP-MIDI content constraints, there is 953 no audible MIDI content during playback 954 currently. The situation may change if 955 resources are freed later.*/ 956 OMX_AUDIO_MIDIPlayBackStateKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 957 OMX_AUDIO_MIDIPlayBackStateVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 958 OMX_AUDIO_MIDIPlayBackStateMax = 0x7FFFFFFF 959 } OMX_AUDIO_MIDIPLAYBACKSTATETYPE; 960 961 962 /** MIDI status 963 * @ingroup midi 964 */ 965 typedef struct OMX_AUDIO_CONFIG_MIDISTATUSTYPE { 966 OMX_U32 nSize; /**< size of the structure in bytes */ 967 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 968 OMX_U32 nPortIndex; /**< port that this structure applies to */ 969 OMX_U16 nNumTracks; /**< Number of MIDI tracks in the file, read only field. 970 NOTE: May not return a meaningful value until the entire 971 file is parsed and buffered. */ 972 OMX_U32 nDuration; /**< The length of the currently open MIDI resource 973 in milliseconds. NOTE: May not return a meaningful value 974 until the entire file is parsed and buffered. */ 975 OMX_U32 nPosition; /**< Current Position of the MIDI resource being played 976 in milliseconds */ 977 OMX_BOOL bVibra; /**< Does Vibra track exist? NOTE: May not return a meaningful 978 value until the entire file is parsed and buffered. */ 979 OMX_U32 nNumMetaEvents; /**< Total number of MIDI Meta Events in the currently 980 open MIDI resource. NOTE: May not return a meaningful value 981 until the entire file is parsed and buffered. */ 982 OMX_U32 nNumActiveVoices; /**< Number of active voices in the currently playing 983 MIDI resource. NOTE: May not return a meaningful value until 984 the entire file is parsed and buffered. */ 985 OMX_AUDIO_MIDIPLAYBACKSTATETYPE eMIDIPlayBackState; /**< MIDI playback state enumeration, read only field */ 986 } OMX_AUDIO_CONFIG_MIDISTATUSTYPE; 987 988 989 /** MIDI Meta Event structure one per Meta Event. 990 * MIDI Meta Events are like audio metadata, except that they are interspersed 991 * with the MIDI content throughout the file and are not localized in the header. 992 * As such, it is necessary to retrieve information about these Meta Events from 993 * the engine, as it encounters these Meta Events within the MIDI content. 994 * For example, SMF files can have up to 14 types of MIDI Meta Events (copyright, 995 * author, default tempo, etc.) scattered throughout the file. 996 * @ingroup midi 997 */ 998 typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE{ 999 OMX_U32 nSize; /**< size of the structure in bytes */ 1000 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1001 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1002 OMX_U32 nIndex; /**< Index of Meta Event */ 1003 OMX_U8 nMetaEventType; /**< Meta Event Type, 7bits (i.e. 0 - 127) */ 1004 OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ 1005 OMX_U32 nTrack; /**< track number for the meta event */ 1006 OMX_U32 nPosition; /**< Position of the meta-event in milliseconds */ 1007 } OMX_AUDIO_CONFIG_MIDIMETAEVENTTYPE; 1008 1009 1010 /** MIDI Meta Event Data structure - one per Meta Event. 1011 * @ingroup midi 1012 */ 1013 typedef struct OMX_AUDIO_CONFIG_MIDIMETAEVENTDATATYPE{ 1014 OMX_U32 nSize; /**< size of the structure in bytes */ 1015 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1016 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1017 OMX_U32 nIndex; /**< Index of Meta Event */ 1018 OMX_U32 nMetaEventSize; /**< size of the Meta Event in bytes */ 1019 OMX_U8 nData[1]; /**< array of one or more bytes of meta data 1020 as indicated by the nMetaEventSize field */ 1021 } OMX_AUDIO_CONFIG__MIDIMETAEVENTDATATYPE; 1022 1023 1024 /** Audio Volume adjustment for a port */ 1025 typedef struct OMX_AUDIO_CONFIG_VOLUMETYPE { 1026 OMX_U32 nSize; /**< size of the structure in bytes */ 1027 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1028 OMX_U32 nPortIndex; /**< Port index indicating which port to 1029 set. Select the input port to set 1030 just that port's volume. Select the 1031 output port to adjust the master 1032 volume. */ 1033 OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) 1034 or logarithmic scale (mB) */ 1035 OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR 1036 Volume logarithmic setting for this port. The values 1037 for volume are in mB (millibels = 1/100 dB) relative 1038 to a gain of 1 (e.g. the output is the same as the 1039 input level). Values are in mB from nMax 1040 (maximum volume) to nMin mB (typically negative). 1041 Since the volume is "voltage" 1042 and not a "power", it takes a setting of 1043 -600 mB to decrease the volume by 1/2. If 1044 a component cannot accurately set the 1045 volume to the requested value, it must 1046 set the volume to the closest value BELOW 1047 the requested value. When getting the 1048 volume setting, the current actual volume 1049 must be returned. */ 1050 } OMX_AUDIO_CONFIG_VOLUMETYPE; 1051 1052 1053 /** Audio Volume adjustment for a channel */ 1054 typedef struct OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE { 1055 OMX_U32 nSize; /**< size of the structure in bytes */ 1056 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1057 OMX_U32 nPortIndex; /**< Port index indicating which port to 1058 set. Select the input port to set 1059 just that port's volume. Select the 1060 output port to adjust the master 1061 volume. */ 1062 OMX_U32 nChannel; /**< channel to select from 0 to N-1, 1063 using OMX_ALL to apply volume settings 1064 to all channels */ 1065 OMX_BOOL bLinear; /**< Is the volume to be set in linear (0.100) or 1066 logarithmic scale (mB) */ 1067 OMX_BS32 sVolume; /**< Volume linear setting in the 0..100 range, OR 1068 Volume logarithmic setting for this port. 1069 The values for volume are in mB 1070 (millibels = 1/100 dB) relative to a gain 1071 of 1 (e.g. the output is the same as the 1072 input level). Values are in mB from nMax 1073 (maximum volume) to nMin mB (typically negative). 1074 Since the volume is "voltage" 1075 and not a "power", it takes a setting of 1076 -600 mB to decrease the volume by 1/2. If 1077 a component cannot accurately set the 1078 volume to the requested value, it must 1079 set the volume to the closest value BELOW 1080 the requested value. When getting the 1081 volume setting, the current actual volume 1082 must be returned. */ 1083 OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, 1084 FALSE otherwise */ 1085 } OMX_AUDIO_CONFIG_CHANNELVOLUMETYPE; 1086 1087 1088 /** Audio balance setting */ 1089 typedef struct OMX_AUDIO_CONFIG_BALANCETYPE { 1090 OMX_U32 nSize; /**< size of the structure in bytes */ 1091 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1092 OMX_U32 nPortIndex; /**< Port index indicating which port to 1093 set. Select the input port to set 1094 just that port's balance. Select the 1095 output port to adjust the master 1096 balance. */ 1097 OMX_S32 nBalance; /**< balance setting for this port 1098 (-100 to 100, where -100 indicates 1099 all left, and no right */ 1100 } OMX_AUDIO_CONFIG_BALANCETYPE; 1101 1102 1103 /** Audio Port mute */ 1104 typedef struct OMX_AUDIO_CONFIG_MUTETYPE { 1105 OMX_U32 nSize; /**< size of the structure in bytes */ 1106 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1107 OMX_U32 nPortIndex; /**< Port index indicating which port to 1108 set. Select the input port to set 1109 just that port's mute. Select the 1110 output port to adjust the master 1111 mute. */ 1112 OMX_BOOL bMute; /**< Mute setting for this port */ 1113 } OMX_AUDIO_CONFIG_MUTETYPE; 1114 1115 1116 /** Audio Channel mute */ 1117 typedef struct OMX_AUDIO_CONFIG_CHANNELMUTETYPE { 1118 OMX_U32 nSize; /**< size of the structure in bytes */ 1119 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1120 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1121 OMX_U32 nChannel; /**< channel to select from 0 to N-1, 1122 using OMX_ALL to apply mute settings 1123 to all channels */ 1124 OMX_BOOL bMute; /**< Mute setting for this channel */ 1125 OMX_BOOL bIsMIDI; /**< TRUE if nChannel refers to a MIDI channel, 1126 FALSE otherwise */ 1127 } OMX_AUDIO_CONFIG_CHANNELMUTETYPE; 1128 1129 1130 1131 /** Enable / Disable for loudness control, which boosts bass and to a 1132 * smaller extent high end frequencies to compensate for hearing 1133 * ability at the extreme ends of the audio spectrum 1134 */ 1135 typedef struct OMX_AUDIO_CONFIG_LOUDNESSTYPE { 1136 OMX_U32 nSize; /**< size of the structure in bytes */ 1137 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1138 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1139 OMX_BOOL bLoudness; /**< Enable/disable for loudness */ 1140 } OMX_AUDIO_CONFIG_LOUDNESSTYPE; 1141 1142 1143 /** Enable / Disable for bass, which controls low frequencies 1144 */ 1145 typedef struct OMX_AUDIO_CONFIG_BASSTYPE { 1146 OMX_U32 nSize; /**< size of the structure in bytes */ 1147 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1148 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1149 OMX_BOOL bEnable; /**< Enable/disable for bass control */ 1150 OMX_S32 nBass; /**< bass setting for the port, as a 1151 continuous value from -100 to 100 1152 (0 means no change in bass level)*/ 1153 } OMX_AUDIO_CONFIG_BASSTYPE; 1154 1155 1156 /** Enable / Disable for treble, which controls high frequencies tones 1157 */ 1158 typedef struct OMX_AUDIO_CONFIG_TREBLETYPE { 1159 OMX_U32 nSize; /**< size of the structure in bytes */ 1160 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1161 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1162 OMX_BOOL bEnable; /**< Enable/disable for treble control */ 1163 OMX_S32 nTreble; /**< treble setting for the port, as a 1164 continuous value from -100 to 100 1165 (0 means no change in treble level) */ 1166 } OMX_AUDIO_CONFIG_TREBLETYPE; 1167 1168 1169 /** An equalizer is typically used for two reasons: to compensate for an 1170 * sub-optimal frequency response of a system to make it sound more natural 1171 * or to create intentionally some unnatural coloring to the sound to create 1172 * an effect. 1173 * @ingroup effects 1174 */ 1175 typedef struct OMX_AUDIO_CONFIG_EQUALIZERTYPE { 1176 OMX_U32 nSize; /**< size of the structure in bytes */ 1177 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1178 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1179 OMX_BOOL bEnable; /**< Enable/disable for equalizer */ 1180 OMX_BU32 sBandIndex; /**< Band number to be set. Upper Limit is 1181 N-1, where N is the number of bands, lower limit is 0 */ 1182 OMX_BU32 sCenterFreq; /**< Center frequecies in Hz. This is a 1183 read only element and is used to determine 1184 the lower, center and upper frequency of 1185 this band. */ 1186 OMX_BS32 sBandLevel; /**< band level in millibels */ 1187 } OMX_AUDIO_CONFIG_EQUALIZERTYPE; 1188 1189 1190 /** Stereo widening mode type 1191 * @ingroup effects 1192 */ 1193 typedef enum OMX_AUDIO_STEREOWIDENINGTYPE { 1194 OMX_AUDIO_StereoWideningHeadphones, /**< Stereo widening for loudspeakers */ 1195 OMX_AUDIO_StereoWideningLoudspeakers, /**< Stereo widening for closely spaced loudspeakers */ 1196 OMX_AUDIO_StereoWideningKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 1197 OMX_AUDIO_StereoWideningVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 1198 OMX_AUDIO_StereoWideningMax = 0x7FFFFFFF 1199 } OMX_AUDIO_STEREOWIDENINGTYPE; 1200 1201 1202 /** Control for stereo widening, which is a special 2-channel 1203 * case of the audio virtualizer effect. For example, for 5.1-channel 1204 * output, it translates to virtual surround sound. 1205 * @ingroup effects 1206 */ 1207 typedef struct OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE { 1208 OMX_U32 nSize; /**< size of the structure in bytes */ 1209 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1210 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1211 OMX_BOOL bEnable; /**< Enable/disable for stereo widening control */ 1212 OMX_AUDIO_STEREOWIDENINGTYPE eWideningType; /**< Stereo widening algorithm type */ 1213 OMX_U32 nStereoWidening; /**< stereo widening setting for the port, 1214 as a continuous value from 0 to 100 */ 1215 } OMX_AUDIO_CONFIG_STEREOWIDENINGTYPE; 1216 1217 1218 /** The chorus effect (or ``choralizer'') is any signal processor which makes 1219 * one sound source (such as a voice) sound like many such sources singing 1220 * (or playing) in unison. Since performance in unison is never exact, chorus 1221 * effects simulate this by making independently modified copies of the input 1222 * signal. Modifications may include (1) delay, (2) frequency shift, and 1223 * (3) amplitude modulation. 1224 * @ingroup effects 1225 */ 1226 typedef struct OMX_AUDIO_CONFIG_CHORUSTYPE { 1227 OMX_U32 nSize; /**< size of the structure in bytes */ 1228 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1229 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1230 OMX_BOOL bEnable; /**< Enable/disable for chorus */ 1231 OMX_BU32 sDelay; /**< average delay in milliseconds */ 1232 OMX_BU32 sModulationRate; /**< rate of modulation in millihertz */ 1233 OMX_U32 nModulationDepth; /**< depth of modulation as a percentage of 1234 delay (i.e. 0 to 100) */ 1235 OMX_BU32 nFeedback; /**< Feedback from chorus output to input in percentage */ 1236 } OMX_AUDIO_CONFIG_CHORUSTYPE; 1237 1238 1239 /** Reverberation is part of the reflected sound that follows the early 1240 * reflections. In a typical room, this consists of a dense succession of 1241 * echoes whose energy decays exponentially. The reverberation effect structure 1242 * as defined here includes both (early) reflections as well as (late) reverberations. 1243 * @ingroup effects 1244 */ 1245 typedef struct OMX_AUDIO_CONFIG_REVERBERATIONTYPE { 1246 OMX_U32 nSize; /**< size of the structure in bytes */ 1247 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1248 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1249 OMX_BOOL bEnable; /**< Enable/disable for reverberation control */ 1250 OMX_BS32 sRoomLevel; /**< Intensity level for the whole room effect 1251 (i.e. both early reflections and late 1252 reverberation) in millibels */ 1253 OMX_BS32 sRoomHighFreqLevel; /**< Attenuation at high frequencies 1254 relative to the intensity at low 1255 frequencies in millibels */ 1256 OMX_BS32 sReflectionsLevel; /**< Intensity level of early reflections 1257 (relative to room value), in millibels */ 1258 OMX_BU32 sReflectionsDelay; /**< Delay time of the first reflection relative 1259 to the direct path, in milliseconds */ 1260 OMX_BS32 sReverbLevel; /**< Intensity level of late reverberation 1261 relative to room level, in millibels */ 1262 OMX_BU32 sReverbDelay; /**< Time delay from the first early reflection 1263 to the beginning of the late reverberation 1264 section, in milliseconds */ 1265 OMX_BU32 sDecayTime; /**< Late reverberation decay time at low 1266 frequencies, in milliseconds */ 1267 OMX_BU32 nDecayHighFreqRatio; /**< Ratio of high frequency decay time relative 1268 to low frequency decay time in percent */ 1269 OMX_U32 nDensity; /**< Modal density in the late reverberation decay, 1270 in percent (i.e. 0 - 100) */ 1271 OMX_U32 nDiffusion; /**< Echo density in the late reverberation decay, 1272 in percent (i.e. 0 - 100) */ 1273 OMX_BU32 sReferenceHighFreq; /**< Reference high frequency in Hertz. This is 1274 the frequency used as the reference for all 1275 the high-frequency settings above */ 1276 1277 } OMX_AUDIO_CONFIG_REVERBERATIONTYPE; 1278 1279 1280 /** Possible settings for the Echo Cancelation structure to use 1281 * @ingroup effects 1282 */ 1283 typedef enum OMX_AUDIO_ECHOCANTYPE { 1284 OMX_AUDIO_EchoCanOff = 0, /**< Echo Cancellation is disabled */ 1285 OMX_AUDIO_EchoCanNormal, /**< Echo Cancellation normal operation - 1286 echo from plastics and face */ 1287 OMX_AUDIO_EchoCanHFree, /**< Echo Cancellation optimized for 1288 Hands Free operation */ 1289 OMX_AUDIO_EchoCanCarKit, /**< Echo Cancellation optimized for 1290 Car Kit (longer echo) */ 1291 OMX_AUDIO_EchoCanKhronosExtensions = 0x6F000000, /**< Reserved region for introducing Khronos Standard Extensions */ 1292 OMX_AUDIO_EchoCanVendorStartUnused = 0x7F000000, /**< Reserved region for introducing Vendor Extensions */ 1293 OMX_AUDIO_EchoCanMax = 0x7FFFFFFF 1294 } OMX_AUDIO_ECHOCANTYPE; 1295 1296 1297 /** Enable / Disable for echo cancelation, which removes undesired echo's 1298 * from the audio 1299 * @ingroup effects 1300 */ 1301 typedef struct OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE { 1302 OMX_U32 nSize; /**< size of the structure in bytes */ 1303 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1304 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1305 OMX_AUDIO_ECHOCANTYPE eEchoCancelation; /**< Echo cancelation settings */ 1306 } OMX_AUDIO_CONFIG_ECHOCANCELATIONTYPE; 1307 1308 1309 /** Enable / Disable for noise reduction, which undesired noise from 1310 * the audio 1311 * @ingroup effects 1312 */ 1313 typedef struct OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE { 1314 OMX_U32 nSize; /**< size of the structure in bytes */ 1315 OMX_VERSIONTYPE nVersion; /**< OMX specification version information */ 1316 OMX_U32 nPortIndex; /**< port that this structure applies to */ 1317 OMX_BOOL bNoiseReduction; /**< Enable/disable for noise reduction */ 1318 } OMX_AUDIO_CONFIG_NOISEREDUCTIONTYPE; 1319 1320 /** @} */ 1321 1322 #ifdef __cplusplus 1323 } 1324 #endif /* __cplusplus */ 1325 1326 #endif 1327 /* File EOF */ 1328 1329