FindBugs Bug Descriptions (Unabridged)

RV: Random value from 0 to 1 is coerced to the integer 0 (RV_01_TO_INT)

A random value from 0 to 1 is being coerced to the integer value 0. You probably want to multiple the random value by something else before coercing it to an integer, or use the Random.nextInt(n) method.

RV: Bad attempt to compute absolute value of signed 32-bit hashcode (RV_ABSOLUTE_VALUE_OF_HASHCODE)

This code generates a hashcode and then computes the absolute value of that hashcode. If the hashcode is Integer.MIN_VALUE, then the result will be negative as well (since Math.abs(Integer.MIN_VALUE) == Integer.MIN_VALUE).

One out of 2^32 strings have a hashCode of Integer.MIN_VALUE, including "polygenelubricants" "GydZG_" and ""DESIGNING WORKHOUSES".

RV: Bad attempt to compute absolute value of signed random integer (RV_ABSOLUTE_VALUE_OF_RANDOM_INT)

This code generates a random signed integer and then computes the absolute value of that random integer. If the number returned by the random number generator is Integer.MIN_VALUE, then the result will be negative as well (since Math.abs(Integer.MIN_VALUE) == Integer.MIN_VALUE). (Same problem arised for long values as well).

RV: Code checks for specific values returned by compareTo (RV_CHECK_COMPARETO_FOR_SPECIFIC_RETURN_VALUE)

This code invoked a compareTo or compare method, and checks to see if the return value is a specific value, such as 1 or -1. When invoking these methods, you should only check the sign of the result, not for any specific non-zero value. While many or most compareTo and compare methods only return -1, 0 or 1, some of them will return other values.

RV: Exception created and dropped rather than thrown (RV_EXCEPTION_NOT_THROWN)

This code creates an exception (or error) object, but doesn't do anything with it. For example, something like

if (x < 0)
  new IllegalArgumentException("x must be nonnegative");

It was probably the intent of the programmer to throw the created exception:

if (x < 0)
  throw new IllegalArgumentException("x must be nonnegative");

RV: Method ignores return value (RV_RETURN_VALUE_IGNORED)

The return value of this method should be checked. One common cause of this warning is to invoke a method on an immutable object, thinking that it updates the object. For example, in the following code fragment,

String dateString = getHeaderField(name);
dateString.trim();

the programmer seems to be thinking that the trim() method will update the String referenced by dateString. But since Strings are immutable, the trim() function returns a new String value, which is being ignored here. The code should be corrected to:

String dateString = getHeaderField(name);
dateString = dateString.trim();

RpC: Repeated conditional tests (RpC_REPEATED_CONDITIONAL_TEST)

The code contains a conditional test is performed twice, one right after the other (e.g., x == 0 || x == 0). Perhaps the second occurrence is intended to be something else (e.g., x == 0 || y == 0).

SA: Self assignment of field (SA_FIELD_SELF_ASSIGNMENT)

This method contains a self assignment of a field; e.g.

  int x;
  public void foo() {
    x = x;
  }

Such assignments are useless, and may indicate a logic error or typo.

SA: Self comparison of field with itself (SA_FIELD_SELF_COMPARISON)

This method compares a field with itself, and may indicate a typo or a logic error. Make sure that you are comparing the right things.

SA: Nonsensical self computation involving a field (e.g., x & x) (SA_FIELD_SELF_COMPUTATION)

This method performs a nonsensical computation of a field with another reference to the same field (e.g., x&x or x-x). Because of the nature of the computation, this operation doesn't seem to make sense, and may indicate a typo or a logic error. Double check the computation.

SA: Self assignment of local rather than assignment to field (SA_LOCAL_SELF_ASSIGNMENT_INSTEAD_OF_FIELD)

This method contains a self assignment of a local variable, and there is a field with an identical name. assignment appears to have been ; e.g.

  int foo;
  public void setFoo(int foo) {
    foo = foo;
  }

The assignment is useless. Did you mean to assign to the field instead?

SA: Self comparison of value with itself (SA_LOCAL_SELF_COMPARISON)

This method compares a local variable with itself, and may indicate a typo or a logic error. Make sure that you are comparing the right things.

SA: Nonsensical self computation involving a variable (e.g., x & x) (SA_LOCAL_SELF_COMPUTATION)

This method performs a nonsensical computation of a local variable with another reference to the same variable (e.g., x&x or x-x). Because of the nature of the computation, this operation doesn't seem to make sense, and may indicate a typo or a logic error. Double check the computation.

SF: Dead store due to switch statement fall through (SF_DEAD_STORE_DUE_TO_SWITCH_FALLTHROUGH)

A value stored in the previous switch case is overwritten here due to a switch fall through. It is likely that you forgot to put a break or return at the end of the previous case.

SF: Dead store due to switch statement fall through to throw (SF_DEAD_STORE_DUE_TO_SWITCH_FALLTHROUGH_TO_THROW)

A value stored in the previous switch case is ignored here due to a switch fall through to a place where an exception is thrown. It is likely that you forgot to put a break or return at the end of the previous case.

SIC: Deadly embrace of non-static inner class and thread local (SIC_THREADLOCAL_DEADLY_EMBRACE)

This class is an inner class, but should probably be a static inner class. As it is, there is a serious danger of a deadly embrace between the inner class and the thread local in the outer class. Because the inner class isn't static, it retains a reference to the outer class. If the thread local contains a reference to an instance of the inner class, the inner and outer instance will both be reachable and not eligible for garbage collection.

SIO: Unnecessary type check done using instanceof operator (SIO_SUPERFLUOUS_INSTANCEOF)

Type check performed using the instanceof operator where it can be statically determined whether the object is of the type requested.

SQL: Method attempts to access a prepared statement parameter with index 0 (SQL_BAD_PREPARED_STATEMENT_ACCESS)

A call to a setXXX method of a prepared statement was made where the parameter index is 0. As parameter indexes start at index 1, this is always a mistake.

SQL: Method attempts to access a result set field with index 0 (SQL_BAD_RESULTSET_ACCESS)

A call to getXXX or updateXXX methods of a result set was made where the field index is 0. As ResultSet fields start at index 1, this is always a mistake.

STI: Unneeded use of currentThread() call, to call interrupted() (STI_INTERRUPTED_ON_CURRENTTHREAD)

This method invokes the Thread.currentThread() call, just to call the interrupted() method. As interrupted() is a static method, is more simple and clear to use Thread.interrupted().

STI: Static Thread.interrupted() method invoked on thread instance (STI_INTERRUPTED_ON_UNKNOWNTHREAD)

This method invokes the Thread.interrupted() method on a Thread object that appears to be a Thread object that is not the current thread. As the interrupted() method is static, the interrupted method will be called on a different object than the one the author intended.

Se: Method must be private in order for serialization to work (SE_METHOD_MUST_BE_PRIVATE)

This class implements the Serializable interface, and defines a method for custom serialization/deserialization. But since that method isn't declared private, it will be silently ignored by the serialization/deserialization API.

Se: The readResolve method must not be declared as a static method. (SE_READ_RESOLVE_IS_STATIC)

In order for the readResolve method to be recognized by the serialization mechanism, it must not be declared as a static method.

TQ: Value annotated as carrying a type qualifier used where a value that must not carry that qualifier is required (TQ_ALWAYS_VALUE_USED_WHERE_NEVER_REQUIRED)

A value specified as carrying a type qualifier annotation is consumed in a location or locations requiring that the value not carry that annotation.

More precisely, a value annotated with a type qualifier specifying when=ALWAYS is guaranteed to reach a use or uses where the same type qualifier specifies when=NEVER.

For example, say that @NonNegative is a nickname for the type qualifier annotation @Negative(when=When.NEVER). The following code will generate this warning because the return statement requires a @NonNegative value, but receives one that is marked as @Negative.

public @NonNegative Integer example(@Negative Integer value) {
    return value;
}

TQ: Comparing values with incompatible type qualifiers (TQ_COMPARING_VALUES_WITH_INCOMPATIBLE_TYPE_QUALIFIERS)

A value specified as carrying a type qualifier annotation is compared with a value that doesn't ever carry that qualifier.

More precisely, a value annotated with a type qualifier specifying when=ALWAYS is compared with a value that where the same type qualifier specifies when=NEVER.

For example, say that @NonNegative is a nickname for the type qualifier annotation @Negative(when=When.NEVER). The following code will generate this warning because the return statement requires a @NonNegative value, but receives one that is marked as @Negative.

public boolean example(@Negative Integer value1, @NonNegative Integer value2) {
    return value1.equals(value2);
}

TQ: Value that might not carry a type qualifier is always used in a way requires that type qualifier (TQ_MAYBE_SOURCE_VALUE_REACHES_ALWAYS_SINK)

A value that is annotated as possibility not being an instance of the values denoted by the type qualifier, and the value is guaranteed to be used in a way that requires values denoted by that type qualifier.

TQ: Value that might carry a type qualifier is always used in a way prohibits it from having that type qualifier (TQ_MAYBE_SOURCE_VALUE_REACHES_NEVER_SINK)

A value that is annotated as possibility being an instance of the values denoted by the type qualifier, and the value is guaranteed to be used in a way that prohibits values denoted by that type qualifier.

TQ: Value annotated as never carrying a type qualifier used where value carrying that qualifier is required (TQ_NEVER_VALUE_USED_WHERE_ALWAYS_REQUIRED)

A value specified as not carrying a type qualifier annotation is guaranteed to be consumed in a location or locations requiring that the value does carry that annotation.

More precisely, a value annotated with a type qualifier specifying when=NEVER is guaranteed to reach a use or uses where the same type qualifier specifies when=ALWAYS.

TODO: example

TQ: Value without a type qualifier used where a value is required to have that qualifier (TQ_UNKNOWN_VALUE_USED_WHERE_ALWAYS_STRICTLY_REQUIRED)

A value is being used in a way that requires the value be annotation with a type qualifier. The type qualifier is strict, so the tool rejects any values that do not have the appropriate annotation.

To coerce a value to have a strict annotation, define an identity function where the return value is annotated with the strict annotation. This is the only way to turn a non-annotated value into a value with a strict type qualifier annotation.

UMAC: Uncallable method defined in anonymous class (UMAC_UNCALLABLE_METHOD_OF_ANONYMOUS_CLASS)

This anonymous class defined a method that is not directly invoked and does not override a method in a superclass. Since methods in other classes cannot directly invoke methods declared in an anonymous class, it seems that this method is uncallable. The method might simply be dead code, but it is also possible that the method is intended to override a method declared in a superclass, and due to an typo or other error the method does not, in fact, override the method it is intended to.

UR: Uninitialized read of field in constructor (UR_UNINIT_READ)

This constructor reads a field which has not yet been assigned a value.  This is often caused when the programmer mistakenly uses the field instead of one of the constructor's parameters.

UR: Uninitialized read of field method called from constructor of superclass (UR_UNINIT_READ_CALLED_FROM_SUPER_CONSTRUCTOR)

This method is invoked in the constructor of of the superclass. At this point, the fields of the class have not yet initialized.

To make this more concrete, consider the following classes:

abstract class A {
  int hashCode;
  abstract Object getValue();
  A() {
    hashCode = getValue().hashCode();
    }
  }
class B extends A {
  Object value;
  B(Object v) {
    this.value = v;
    }
  Object getValue() {
    return value;
  }
  }

When a B is constructed, the constructor for the A class is invoked before the constructor for B sets value. Thus, when the constructor for A invokes getValue, an uninitialized value is read for value

USELESS_STRING: Invocation of toString on an unnamed array (DMI_INVOKING_TOSTRING_ON_ANONYMOUS_ARRAY)

The code invokes toString on an (anonymous) array. Calling toString on an array generates a fairly useless result such as [C@16f0472. Consider using Arrays.toString to convert the array into a readable String that gives the contents of the array. See Programming Puzzlers, chapter 3, puzzle 12.

USELESS_STRING: Invocation of toString on an array (DMI_INVOKING_TOSTRING_ON_ARRAY)

The code invokes toString on an array, which will generate a fairly useless result such as [C@16f0472. Consider using Arrays.toString to convert the array into a readable String that gives the contents of the array. See Programming Puzzlers, chapter 3, puzzle 12.

USELESS_STRING: Array formatted in useless way using format string (VA_FORMAT_STRING_BAD_CONVERSION_FROM_ARRAY)

One of the arguments being formatted with a format string is an array. This will be formatted using a fairly useless format, such as [I@304282, which doesn't actually show the contents of the array. Consider wrapping the array using Arrays.asList(...) before handling it off to a formatted.

UwF: Field only ever set to null (UWF_NULL_FIELD)

All writes to this field are of the constant value null, and thus all reads of the field will return null. Check for errors, or remove it if it is useless.

UwF: Unwritten field (UWF_UNWRITTEN_FIELD)

This field is never written.  All reads of it will return the default value. Check for errors (should it have been initialized?), or remove it if it is useless.

VA: Primitive array passed to function expecting a variable number of object arguments (VA_PRIMITIVE_ARRAY_PASSED_TO_OBJECT_VARARG)

This code passes a primitive array to a function that takes a variable number of object arguments. This creates an array of length one to hold the primitive array and passes it to the function.

VR: Class makes reference to unresolvable class or method (VR_UNRESOLVABLE_REFERENCE)

This class makes a reference to a class or method that can not be resolved using against the libraries it is being analyzed with.

LG: Potential lost logger changes due to weak reference in OpenJDK (LG_LOST_LOGGER_DUE_TO_WEAK_REFERENCE)

OpenJDK introduces a potential incompatibility. In particular, the java.util.logging.Logger behavior has changed. Instead of using strong references, it now uses weak references internally. That's a reasonable change, but unfortunately some code relies on the old behavior - when changing logger configuration, it simply drops the logger reference. That means that the garbage collector is free to reclaim that memory, which means that the logger configuration is lost. For example, consider:

public static void initLogging() throws Exception {
 Logger logger = Logger.getLogger("edu.umd.cs");
 logger.addHandler(new FileHandler()); // call to change logger configuration
 logger.setUseParentHandlers(false); // another call to change logger configuration
}

The logger reference is lost at the end of the method (it doesn't escape the method), so if you have a garbage collection cycle just after the call to initLogging, the logger configuration is lost (because Logger only keeps weak references).

public static void main(String[] args) throws Exception {
 initLogging(); // adds a file handler to the logger
 System.gc(); // logger configuration lost
 Logger.getLogger("edu.umd.cs").info("Some message"); // this isn't logged to the file as expected
}

Ulf Ochsenfahrt and Eric Fellheimer

OBL: Method may fail to clean up stream or resource (OBL_UNSATISFIED_OBLIGATION)

This method may fail to clean up (close, dispose of) a stream, database object, or other resource requiring an explicit cleanup operation.

In general, if a method opens a stream or other resource, the method should use a try/finally block to ensure that the stream or resource is cleaned up before the method returns.

This bug pattern is essentially the same as the OS_OPEN_STREAM and ODR_OPEN_DATABASE_RESOURCE bug patterns, but is based on a different (and hopefully better) static analysis technique. We are interested is getting feedback about the usefulness of this bug pattern. To send feedback, either:

• send email to findbugs@cs.umd.edu
• file a bug report: http://findbugs.sourceforge.net/reportingBugs.html

In particular, the false-positive suppression heuristics for this bug pattern have not been extensively tuned, so reports about false positives are helpful to us.

See Weimer and Necula, Finding and Preventing Run-Time Error Handling Mistakes, for a description of the analysis technique.

OBL: Method may fail to clean up stream or resource on checked exception (OBL_UNSATISFIED_OBLIGATION_EXCEPTION_EDGE)

This method may fail to clean up (close, dispose of) a stream, database object, or other resource requiring an explicit cleanup operation.

In general, if a method opens a stream or other resource, the method should use a try/finally block to ensure that the stream or resource is cleaned up before the method returns.

This bug pattern is essentially the same as the OS_OPEN_STREAM and ODR_OPEN_DATABASE_RESOURCE bug patterns, but is based on a different (and hopefully better) static analysis technique. We are interested is getting feedback about the usefulness of this bug pattern. To send feedback, either:

• send email to findbugs@cs.umd.edu
• file a bug report: http://findbugs.sourceforge.net/reportingBugs.html

In particular, the false-positive suppression heuristics for this bug pattern have not been extensively tuned, so reports about false positives are helpful to us.

See Weimer and Necula, Finding and Preventing Run-Time Error Handling Mistakes, for a description of the analysis technique.

TEST: Testing (TESTING)

This bug pattern is only generated by new, incompletely implemented bug detectors.

Dm: Consider using Locale parameterized version of invoked method (DM_CONVERT_CASE)

A String is being converted to upper or lowercase, using the platform's default encoding. This may result in improper conversions when used with international characters. Use the

• String.toUpperCase( Locale l )
• String.toLowerCase( Locale l )

versions instead.

Dm: Reliance on default encoding (DM_DEFAULT_ENCODING)

Found a call to a method which will perform a byte to String (or String to byte) conversion, and will assume that the default platform encoding is suitable. This will cause the application behaviour to vary between platforms. Use an alternative API and specify a charset name or Charset object explicitly.

DP: Classloaders should only be created inside doPrivileged block (DP_CREATE_CLASSLOADER_INSIDE_DO_PRIVILEGED)

This code creates a classloader, which needs permission if a security manage is installed. If this code might be invoked by code that does not have security permissions, then the classloader creation needs to occur inside a doPrivileged block.

DP: Method invoked that should be only be invoked inside a doPrivileged block (DP_DO_INSIDE_DO_PRIVILEGED)

This code invokes a method that requires a security permission check. If this code will be granted security permissions, but might be invoked by code that does not have security permissions, then the invocation needs to occur inside a doPrivileged block.

EI: May expose internal representation by returning reference to mutable object (EI_EXPOSE_REP)

Returning a reference to a mutable object value stored in one of the object's fields exposes the internal representation of the object.  If instances are accessed by untrusted code, and unchecked changes to the mutable object would compromise security or other important properties, you will need to do something different. Returning a new copy of the object is better approach in many situations.

EI2: May expose internal representation by incorporating reference to mutable object (EI_EXPOSE_REP2)

This code stores a reference to an externally mutable object into the internal representation of the object.  If instances are accessed by untrusted code, and unchecked changes to the mutable object would compromise security or other important properties, you will need to do something different. Storing a copy of the object is better approach in many situations.

FI: Finalizer should be protected, not public (FI_PUBLIC_SHOULD_BE_PROTECTED)

A class's finalize() method should have protected access, not public.

MS: May expose internal static state by storing a mutable object into a static field (EI_EXPOSE_STATIC_REP2)

This code stores a reference to an externally mutable object into a static field. If unchecked changes to the mutable object would compromise security or other important properties, you will need to do something different. Storing a copy of the object is better approach in many situations.

MS: Field isn't final and can't be protected from malicious code (MS_CANNOT_BE_FINAL)

A mutable static field could be changed by malicious code or by accident from another package. Unfortunately, the way the field is used doesn't allow any easy fix to this problem.

MS: Public static method may expose internal representation by returning array (MS_EXPOSE_REP)

A public static method returns a reference to an array that is part of the static state of the class. Any code that calls this method can freely modify the underlying array. One fix is to return a copy of the array.

MS: Field should be both final and package protected (MS_FINAL_PKGPROTECT)

A mutable static field could be changed by malicious code or by accident from another package. The field could be made package protected and/or made final to avoid this vulnerability.

MS: Field is a mutable array (MS_MUTABLE_ARRAY)

A final static field references an array and can be accessed by malicious code or by accident from another package. This code can freely modify the contents of the array.

MS: Field is a mutable Hashtable (MS_MUTABLE_HASHTABLE)

A final static field references a Hashtable and can be accessed by malicious code or by accident from another package. This code can freely modify the contents of the Hashtable.

MS: Field should be moved out of an interface and made package protected (MS_OOI_PKGPROTECT)

A final static field that is defined in an interface references a mutable object such as an array or hashtable. This mutable object could be changed by malicious code or by accident from another package. To solve this, the field needs to be moved to a class and made package protected to avoid this vulnerability.

MS: Field should be package protected (MS_PKGPROTECT)

A mutable static field could be changed by malicious code or by accident. The field could be made package protected to avoid this vulnerability.

MS: Field isn't final but should be (MS_SHOULD_BE_FINAL)

This static field public but not final, and could be changed by malicious code or by accident from another package. The field could be made final to avoid this vulnerability.

MS: Field isn't final but should be refactored to be so (MS_SHOULD_BE_REFACTORED_TO_BE_FINAL)

This static field public but not final, and could be changed by malicious code or by accident from another package. The field could be made final to avoid this vulnerability. However, the static initializer contains more than one write to the field, so doing so will require some refactoring.

AT: Sequence of calls to concurrent abstraction may not be atomic (AT_OPERATION_SEQUENCE_ON_CONCURRENT_ABSTRACTION)

This code contains a sequence of calls to a concurrent abstraction (such as a concurrent hash map). These calls will not be executed atomically.

DC: Possible double check of field (DC_DOUBLECHECK)

This method may contain an instance of double-checked locking.  This idiom is not correct according to the semantics of the Java memory model.  For more information, see the web page http://www.cs.umd.edu/~pugh/java/memoryModel/DoubleCheckedLocking.html.

DL: Synchronization on Boolean (DL_SYNCHRONIZATION_ON_BOOLEAN)

The code synchronizes on a boxed primitive constant, such as an Boolean.

private static Boolean inited = Boolean.FALSE;
...
  synchronized(inited) {
    if (!inited) {
       init();
       inited = Boolean.TRUE;
       }
     }
...

Since there normally exist only two Boolean objects, this code could be synchronizing on the same object as other, unrelated code, leading to unresponsiveness and possible deadlock

See CERT CON08-J. Do not synchronize on objects that may be reused for more information.

DL: Synchronization on boxed primitive (DL_SYNCHRONIZATION_ON_BOXED_PRIMITIVE)

The code synchronizes on a boxed primitive constant, such as an Integer.

private static Integer count = 0;
...
  synchronized(count) {
     count++;
     }
...

Since Integer objects can be cached and shared, this code could be synchronizing on the same object as other, unrelated code, leading to unresponsiveness and possible deadlock

See CERT CON08-J. Do not synchronize on objects that may be reused for more information.

DL: Synchronization on interned String (DL_SYNCHRONIZATION_ON_SHARED_CONSTANT)

The code synchronizes on interned String.

private static String LOCK = "LOCK";
...
  synchronized(LOCK) { ...}
...

Constant Strings are interned and shared across all other classes loaded by the JVM. Thus, this could is locking on something that other code might also be locking. This could result in very strange and hard to diagnose blocking and deadlock behavior. See http://www.javalobby.org/java/forums/t96352.html and http://jira.codehaus.org/browse/JETTY-352.

See CERT CON08-J. Do not synchronize on objects that may be reused for more information.

DL: Synchronization on boxed primitive values (DL_SYNCHRONIZATION_ON_UNSHARED_BOXED_PRIMITIVE)

The code synchronizes on an apparently unshared boxed primitive, such as an Integer.

private static final Integer fileLock = new Integer(1);
...
  synchronized(fileLock) {
     .. do something ..
     }
...

It would be much better, in this code, to redeclare fileLock as

private static final Object fileLock = new Object();

The existing code might be OK, but it is confusing and a future refactoring, such as the "Remove Boxing" refactoring in IntelliJ, might replace this with the use of an interned Integer object shared throughout the JVM, leading to very confusing behavior and potential deadlock.

Dm: Monitor wait() called on Condition (DM_MONITOR_WAIT_ON_CONDITION)

This method calls wait() on a java.util.concurrent.locks.Condition object.  Waiting for a Condition should be done using one of the await() methods defined by the Condition interface.

Dm: A thread was created using the default empty run method (DM_USELESS_THREAD)

This method creates a thread without specifying a run method either by deriving from the Thread class, or by passing a Runnable object. This thread, then, does nothing but waste time.

ESync: Empty synchronized block (ESync_EMPTY_SYNC)

The code contains an empty synchronized block:

synchronized() {}

Empty synchronized blocks are far more subtle and hard to use correctly than most people recognize, and empty synchronized blocks are almost never a better solution than less contrived solutions.

IS: Inconsistent synchronization (IS2_INCONSISTENT_SYNC)

The fields of this class appear to be accessed inconsistently with respect to synchronization.  This bug report indicates that the bug pattern detector judged that

• The class contains a mix of locked and unlocked accesses,
• The class is not annotated as javax.annotation.concurrent.NotThreadSafe,
• At least one locked access was performed by one of the class's own methods, and
• The number of unsynchronized field accesses (reads and writes) was no more than one third of all accesses, with writes being weighed twice as high as reads

A typical bug matching this bug pattern is forgetting to synchronize one of the methods in a class that is intended to be thread-safe.

You can select the nodes labeled "Unsynchronized access" to show the code locations where the detector believed that a field was accessed without synchronization.

Note that there are various sources of inaccuracy in this detector; for example, the detector cannot statically detect all situations in which a lock is held.  Also, even when the detector is accurate in distinguishing locked vs. unlocked accesses, the code in question may still be correct.

IS: Field not guarded against concurrent access (IS_FIELD_NOT_GUARDED)

This field is annotated with net.jcip.annotations.GuardedBy or javax.annotation.concurrent.GuardedBy, but can be accessed in a way that seems to violate those annotations.

JLM: Synchronization performed on Lock (JLM_JSR166_LOCK_MONITORENTER)

This method performs synchronization an object that implements java.util.concurrent.locks.Lock. Such an object is locked/unlocked using acquire()/release() rather than using the synchronized (...) construct.

JLM: Synchronization performed on util.concurrent instance (JLM_JSR166_UTILCONCURRENT_MONITORENTER)

This method performs synchronization an object that is an instance of a class from the java.util.concurrent package (or its subclasses). Instances of these classes have their own concurrency control mechanisms that are orthogonal to the synchronization provided by the Java keyword synchronized. For example, synchronizing on an AtomicBoolean will not prevent other threads from modifying the AtomicBoolean.

Such code may be correct, but should be carefully reviewed and documented, and may confuse people who have to maintain the code at a later date.

JLM: Using monitor style wait methods on util.concurrent abstraction (JML_JSR166_CALLING_WAIT_RATHER_THAN_AWAIT)

This method calls wait(), notify() or notifyAll()() on an object that also provides an await(), signal(), signalAll() method (such as util.concurrent Condition objects). This probably isn't what you want, and even if you do want it, you should consider changing your design, as other developers will find it exceptionally confusing.

LI: Incorrect lazy initialization of static field (LI_LAZY_INIT_STATIC)

This method contains an unsynchronized lazy initialization of a non-volatile static field. Because the compiler or processor may reorder instructions, threads are not guaranteed to see a completely initialized object, if the method can be called by multiple threads. You can make the field volatile to correct the problem. For more information, see the Java Memory Model web site.

LI: Incorrect lazy initialization and update of static field (LI_LAZY_INIT_UPDATE_STATIC)

This method contains an unsynchronized lazy initialization of a static field. After the field is set, the object stored into that location is further updated or accessed. The setting of the field is visible to other threads as soon as it is set. If the futher accesses in the method that set the field serve to initialize the object, then you have a very serious multithreading bug, unless something else prevents any other thread from accessing the stored object until it is fully initialized.

Even if you feel confident that the method is never called by multiple threads, it might be better to not set the static field until the value you are setting it to is fully populated/initialized.

ML: Synchronization on field in futile attempt to guard that field (ML_SYNC_ON_FIELD_TO_GUARD_CHANGING_THAT_FIELD)

This method synchronizes on a field in what appears to be an attempt to guard against simultaneous updates to that field. But guarding a field gets a lock on the referenced object, not on the field. This may not provide the mutual exclusion you need, and other threads might be obtaining locks on the referenced objects (for other purposes). An example of this pattern would be:

private Long myNtfSeqNbrCounter = new Long(0);
private Long getNotificationSequenceNumber() {
     Long result = null;
     synchronized(myNtfSeqNbrCounter) {
         result = new Long(myNtfSeqNbrCounter.longValue() + 1);
         myNtfSeqNbrCounter = new Long(result.longValue());
     }
     return result;
 }

ML: Method synchronizes on an updated field (ML_SYNC_ON_UPDATED_FIELD)

This method synchronizes on an object referenced from a mutable field. This is unlikely to have useful semantics, since different threads may be synchronizing on different objects.

MSF: Mutable servlet field (MSF_MUTABLE_SERVLET_FIELD)

A web server generally only creates one instance of servlet or jsp class (i.e., treats the class as a Singleton), and will have multiple threads invoke methods on that instance to service multiple simultaneous requests. Thus, having a mutable instance field generally creates race conditions.

MWN: Mismatched notify() (MWN_MISMATCHED_NOTIFY)

This method calls Object.notify() or Object.notifyAll() without obviously holding a lock on the object.  Calling notify() or notifyAll() without a lock held will result in an IllegalMonitorStateException being thrown.

MWN: Mismatched wait() (MWN_MISMATCHED_WAIT)

This method calls Object.wait() without obviously holding a lock on the object.  Calling wait() without a lock held will result in an IllegalMonitorStateException being thrown.

NN: Naked notify (NN_NAKED_NOTIFY)

A call to notify() or notifyAll() was made without any (apparent) accompanying modification to mutable object state.  In general, calling a notify method on a monitor is done because some condition another thread is waiting for has become true.  However, for the condition to be meaningful, it must involve a heap object that is visible to both threads.

This bug does not necessarily indicate an error, since the change to mutable object state may have taken place in a method which then called the method containing the notification.

NP: Synchronize and null check on the same field. (NP_SYNC_AND_NULL_CHECK_FIELD)

Since the field is synchronized on, it seems not likely to be null. If it is null and then synchronized on a NullPointerException will be thrown and the check would be pointless. Better to synchronize on another field.

No: Using notify() rather than notifyAll() (NO_NOTIFY_NOT_NOTIFYALL)

This method calls notify() rather than notifyAll().  Java monitors are often used for multiple conditions.  Calling notify() only wakes up one thread, meaning that the thread woken up might not be the one waiting for the condition that the caller just satisfied.

RS: Class's readObject() method is synchronized (RS_READOBJECT_SYNC)

This serializable class defines a readObject() which is synchronized.  By definition, an object created by deserialization is only reachable by one thread, and thus there is no need for readObject() to be synchronized.  If the readObject() method itself is causing the object to become visible to another thread, that is an example of very dubious coding style.

RV: Return value of putIfAbsent ignored, value passed to putIfAbsent reused (RV_RETURN_VALUE_OF_PUTIFABSENT_IGNORED)

Ru: Invokes run on a thread (did you mean to start it instead?) (RU_INVOKE_RUN)

This method explicitly invokes run() on an object.  In general, classes implement the Runnable interface because they are going to have their run() method invoked in a new thread, in which case Thread.start() is the right method to call.

SC: Constructor invokes Thread.start() (SC_START_IN_CTOR)

The constructor starts a thread. This is likely to be wrong if the class is ever extended/subclassed, since the thread will be started before the subclass constructor is started.

SP: Method spins on field (SP_SPIN_ON_FIELD)

This method spins in a loop which reads a field.  The compiler may legally hoist the read out of the loop, turning the code into an infinite loop.  The class should be changed so it uses proper synchronization (including wait and notify calls).

STCAL: Call to static Calendar (STCAL_INVOKE_ON_STATIC_CALENDAR_INSTANCE)

Even though the JavaDoc does not contain a hint about it, Calendars are inherently unsafe for multihtreaded use. The detector has found a call to an instance of Calendar that has been obtained via a static field. This looks suspicous.

For more information on this see Sun Bug #6231579 and Sun Bug #6178997.

STCAL: Call to static DateFormat (STCAL_INVOKE_ON_STATIC_DATE_FORMAT_INSTANCE)

As the JavaDoc states, DateFormats are inherently unsafe for multithreaded use. The detector has found a call to an instance of DateFormat that has been obtained via a static field. This looks suspicous.

For more information on this see Sun Bug #6231579 and Sun Bug #6178997.

STCAL: Static Calendar field (STCAL_STATIC_CALENDAR_INSTANCE)

Even though the JavaDoc does not contain a hint about it, Calendars are inherently unsafe for multihtreaded use. Sharing a single instance across thread boundaries without proper synchronization will result in erratic behavior of the application. Under 1.4 problems seem to surface less often than under Java 5 where you will probably see random ArrayIndexOutOfBoundsExceptions or IndexOutOfBoundsExceptions in sun.util.calendar.BaseCalendar.getCalendarDateFromFixedDate().

You may also experience serialization problems.

Using an instance field is recommended.

For more information on this see Sun Bug #6231579 and Sun Bug #6178997.

STCAL: Static DateFormat (STCAL_STATIC_SIMPLE_DATE_FORMAT_INSTANCE)

As the JavaDoc states, DateFormats are inherently unsafe for multithreaded use. Sharing a single instance across thread boundaries without proper synchronization will result in erratic behavior of the application.

You may also experience serialization problems.

Using an instance field is recommended.

For more information on this see Sun Bug #6231579 and Sun Bug #6178997.

SWL: Method calls Thread.sleep() with a lock held (SWL_SLEEP_WITH_LOCK_HELD)

This method calls Thread.sleep() with a lock held. This may result in very poor performance and scalability, or a deadlock, since other threads may be waiting to acquire the lock. It is a much better idea to call wait() on the lock, which releases the lock and allows other threads to run.

TLW: Wait with two locks held (TLW_TWO_LOCK_WAIT)

Waiting on a monitor while two locks are held may cause deadlock.   Performing a wait only releases the lock on the object being waited on, not any other locks.   This not necessarily a bug, but is worth examining closely.

UG: Unsynchronized get method, synchronized set method (UG_SYNC_SET_UNSYNC_GET)

This class contains similarly-named get and set methods where the set method is synchronized and the get method is not.  This may result in incorrect behavior at runtime, as callers of the get method will not necessarily see a consistent state for the object.  The get method should be made synchronized.

UL: Method does not release lock on all paths (UL_UNRELEASED_LOCK)

This method acquires a JSR-166 (java.util.concurrent) lock, but does not release it on all paths out of the method. In general, the correct idiom for using a JSR-166 lock is:

    Lock l = ...;
    l.lock();
    try {
        // do something
    } finally {
        l.unlock();
    }

UL: Method does not release lock on all exception paths (UL_UNRELEASED_LOCK_EXCEPTION_PATH)

This method acquires a JSR-166 (java.util.concurrent) lock, but does not release it on all exception paths out of the method. In general, the correct idiom for using a JSR-166 lock is:

    Lock l = ...;
    l.lock();
    try {
        // do something
    } finally {
        l.unlock();
    }

UW: Unconditional wait (UW_UNCOND_WAIT)

This method contains a call to java.lang.Object.wait() which is not guarded by conditional control flow.  The code should verify that condition it intends to wait for is not already satisfied before calling wait; any previous notifications will be ignored.

VO: An increment to a volatile field isn't atomic (VO_VOLATILE_INCREMENT)

This code increments a volatile field. Increments of volatile fields aren't atomic. If more than one thread is incrementing the field at the same time, increments could be lost.

VO: A volatile reference to an array doesn't treat the array elements as volatile (VO_VOLATILE_REFERENCE_TO_ARRAY)

This declares a volatile reference to an array, which might not be what you want. With a volatile reference to an array, reads and writes of the reference to the array are treated as volatile, but the array elements are non-volatile. To get volatile array elements, you will need to use one of the atomic array classes in java.util.concurrent (provided in Java 5.0).

WL: Synchronization on getClass rather than class literal (WL_USING_GETCLASS_RATHER_THAN_CLASS_LITERAL)

This instance method synchronizes on this.getClass(). If this class is subclassed, subclasses will synchronize on the class object for the subclass, which isn't likely what was intended. For example, consider this code from java.awt.Label:

     private static final String base = "label";
     private static int nameCounter = 0;
     String constructComponentName() {
        synchronized (getClass()) {
            return base + nameCounter++;
        }
     }
     

Subclasses of Label won't synchronize on the same subclass, giving rise to a datarace. Instead, this code should be synchronizing on Label.class

     private static final String base = "label";
     private static int nameCounter = 0;
     String constructComponentName() {
        synchronized (Label.class) {
            return base + nameCounter++;
        }
     }
     

Bug pattern contributed by Jason Mehrens

WS: Class's writeObject() method is synchronized but nothing else is (WS_WRITEOBJECT_SYNC)

This class has a writeObject() method which is synchronized; however, no other method of the class is synchronized.

Wa: Condition.await() not in loop (WA_AWAIT_NOT_IN_LOOP)

This method contains a call to java.util.concurrent.await() (or variants) which is not in a loop.  If the object is used for multiple conditions, the condition the caller intended to wait for might not be the one that actually occurred.

Wa: Wait not in loop (WA_NOT_IN_LOOP)

This method contains a call to java.lang.Object.wait() which is not in a loop.  If the monitor is used for multiple conditions, the condition the caller intended to wait for might not be the one that actually occurred.

NOISE: Bogus warning about a field reference (NOISE_FIELD_REFERENCE)

Bogus warning.

NOISE: Bogus warning about a method call (NOISE_METHOD_CALL)

Bogus warning.

NOISE: Bogus warning about a null pointer dereference (NOISE_NULL_DEREFERENCE)

Bogus warning.

NOISE: Bogus warning about an operation (NOISE_OPERATION)

Bogus warning.

Bx: Primitive value is boxed and then immediately unboxed (BX_BOXING_IMMEDIATELY_UNBOXED)

A primitive is boxed, and then immediately unboxed. This probably is due to a manual boxing in a place where an unboxed value is required, thus forcing the compiler to immediately undo the work of the boxing.

Bx: Primitive value is boxed then unboxed to perform primitive coercion (BX_BOXING_IMMEDIATELY_UNBOXED_TO_PERFORM_COERCION)

A primitive boxed value constructed and then immediately converted into a different primitive type (e.g., new Double(d).intValue()). Just perform direct primitive coercion (e.g., (int) d).

Bx: Boxed value is unboxed and then immediately reboxed (BX_UNBOXING_IMMEDIATELY_REBOXED)

A boxed value is unboxed and then immediately reboxed.

Bx: Boxing/unboxing to parse a primitive (DM_BOXED_PRIMITIVE_FOR_PARSING)

A boxed primitive is created from a String, just to extract the unboxed primitive value. It is more efficient to just call the static parseXXX method.

Bx: Method allocates a boxed primitive just to call toString (DM_BOXED_PRIMITIVE_TOSTRING)

A boxed primitive is allocated just to call toString(). It is more effective to just use the static form of toString which takes the primitive value. So,

Bx: Method invokes inefficient floating-point Number constructor; use static valueOf instead (DM_FP_NUMBER_CTOR)

Using new Double(double) is guaranteed to always result in a new object whereas Double.valueOf(double) allows caching of values to be done by the compiler, class library, or JVM. Using of cached values avoids object allocation and the code will be faster.

Unless the class must be compatible with JVMs predating Java 1.5, use either autoboxing or the valueOf() method when creating instances of Double and Float.

Bx: Method invokes inefficient Number constructor; use static valueOf instead (DM_NUMBER_CTOR)

Using new Integer(int) is guaranteed to always result in a new object whereas Integer.valueOf(int) allows caching of values to be done by the compiler, class library, or JVM. Using of cached values avoids object allocation and the code will be faster.

Values between -128 and 127 are guaranteed to have corresponding cached instances and using valueOf is approximately 3.5 times faster than using constructor. For values outside the constant range the performance of both styles is the same.

Unless the class must be compatible with JVMs predating Java 1.5, use either autoboxing or the valueOf() method when creating instances of Long, Integer, Short, Character, and Byte.

Dm: The equals and hashCode methods of URL are blocking (DMI_BLOCKING_METHODS_ON_URL)

The equals and hashCode method of URL perform domain name resolution, this can result in a big performance hit. See http://michaelscharf.blogspot.com/2006/11/javaneturlequals-and-hashcode-make.html for more information. Consider using java.net.URI instead.

Dm: Maps and sets of URLs can be performance hogs (DMI_COLLECTION_OF_URLS)

This method or field is or uses a Map or Set of URLs. Since both the equals and hashCode method of URL perform domain name resolution, this can result in a big performance hit. See http://michaelscharf.blogspot.com/2006/11/javaneturlequals-and-hashcode-make.html for more information. Consider using java.net.URI instead.

Dm: Method invokes inefficient Boolean constructor; use Boolean.valueOf(...) instead (DM_BOOLEAN_CTOR)

Creating new instances of java.lang.Boolean wastes memory, since Boolean objects are immutable and there are only two useful values of this type.  Use the Boolean.valueOf() method (or Java 1.5 autoboxing) to create Boolean objects instead.

Dm: Explicit garbage collection; extremely dubious except in benchmarking code (DM_GC)

Code explicitly invokes garbage collection. Except for specific use in benchmarking, this is very dubious.

In the past, situations where people have explicitly invoked the garbage collector in routines such as close or finalize methods has led to huge performance black holes. Garbage collection can be expensive. Any situation that forces hundreds or thousands of garbage collections will bring the machine to a crawl.

Dm: Method allocates an object, only to get the class object (DM_NEW_FOR_GETCLASS)

This method allocates an object just to call getClass() on it, in order to retrieve the Class object for it. It is simpler to just access the .class property of the class.

Dm: Use the nextInt method of Random rather than nextDouble to generate a random integer (DM_NEXTINT_VIA_NEXTDOUBLE)

If r is a java.util.Random, you can generate a random number from 0 to n-1 using r.nextInt(n), rather than using (int)(r.nextDouble() * n).

The argument to nextInt must be positive. If, for example, you want to generate a random value from -99 to 0, use -r.nextInt(100).

Dm: Method invokes inefficient new String(String) constructor (DM_STRING_CTOR)

Using the java.lang.String(String) constructor wastes memory because the object so constructed will be functionally indistinguishable from the String passed as a parameter.  Just use the argument String directly.

Dm: Method invokes toString() method on a String (DM_STRING_TOSTRING)

Calling String.toString() is just a redundant operation. Just use the String.

Dm: Method invokes inefficient new String() constructor (DM_STRING_VOID_CTOR)

Creating a new java.lang.String object using the no-argument constructor wastes memory because the object so created will be functionally indistinguishable from the empty string constant "".  Java guarantees that identical string constants will be represented by the same String object.  Therefore, you should just use the empty string constant directly.

HSC: Huge string constants is duplicated across multiple class files (HSC_HUGE_SHARED_STRING_CONSTANT)

A large String constant is duplicated across multiple class files. This is likely because a final field is initialized to a String constant, and the Java language mandates that all references to a final field from other classes be inlined into that classfile. See JDK bug 6447475 for a description of an occurrence of this bug in the JDK and how resolving it reduced the size of the JDK by 1 megabyte.

IMA: Method accesses a private member variable of owning class (IMA_INEFFICIENT_MEMBER_ACCESS)

This method of an inner class reads from or writes to a private member variable of the owning class, or calls a private method of the owning class. The compiler must generate a special method to access this private member, causing this to be less efficient. Relaxing the protection of the member variable or method will allow the compiler to treat this as a normal access.

ITA: Method uses toArray() with zero-length array argument (ITA_INEFFICIENT_TO_ARRAY)

This method uses the toArray() method of a collection derived class, and passes in a zero-length prototype array argument. It is more efficient to use myCollection.toArray(new Foo[myCollection.size()]) If the array passed in is big enough to store all of the elements of the collection, then it is populated and returned directly. This avoids the need to create a second array (by reflection) to return as the result.

SBSC: Method concatenates strings using + in a loop (SBSC_USE_STRINGBUFFER_CONCATENATION)

The method seems to be building a String using concatenation in a loop. In each iteration, the String is converted to a StringBuffer/StringBuilder, appended to, and converted back to a String. This can lead to a cost quadratic in the number of iterations, as the growing string is recopied in each iteration.

Better performance can be obtained by using a StringBuffer (or StringBuilder in Java 1.5) explicitly.

For example:

  // This is bad
  String s = "";
  for (int i = 0; i < field.length; ++i) {
    s = s + field[i];
  }

  // This is better
  StringBuffer buf = new StringBuffer();
  for (int i = 0; i < field.length; ++i) {
    buf.append(field[i]);
  }
  String s = buf.toString();

SIC: Should be a static inner class (SIC_INNER_SHOULD_BE_STATIC)

This class is an inner class, but does not use its embedded reference to the object which created it.  This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.  If possible, the class should be made static.

SIC: Could be refactored into a named static inner class (SIC_INNER_SHOULD_BE_STATIC_ANON)

This class is an inner class, but does not use its embedded reference to the object which created it.  This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.  If possible, the class should be made into a static inner class. Since anonymous inner classes cannot be marked as static, doing this will require refactoring the inner class so that it is a named inner class.

SIC: Could be refactored into a static inner class (SIC_INNER_SHOULD_BE_STATIC_NEEDS_THIS)

This class is an inner class, but does not use its embedded reference to the object which created it except during construction of the inner object.  This reference makes the instances of the class larger, and may keep the reference to the creator object alive longer than necessary.  If possible, the class should be made into a static inner class. Since the reference to the outer object is required during construction of the inner instance, the inner class will need to be refactored so as to pass a reference to the outer instance to the constructor for the inner class.

SS: Unread field: should this field be static? (SS_SHOULD_BE_STATIC)

This class contains an instance final field that is initialized to a compile-time static value. Consider making the field static.

UM: Method calls static Math class method on a constant value (UM_UNNECESSARY_MATH)

This method uses a static method from java.lang.Math on a constant value. This method's result in this case, can be determined statically, and is faster and sometimes more accurate to just use the constant. Methods detected are:

UPM: Private method is never called (UPM_UNCALLED_PRIVATE_METHOD)

This private method is never called. Although it is possible that the method will be invoked through reflection, it is more likely that the method is never used, and should be removed.

UrF: Unread field (URF_UNREAD_FIELD)

This field is never read.  Consider removing it from the class.

UuF: Unused field (UUF_UNUSED_FIELD)

This field is never used.  Consider removing it from the class.

WMI: Inefficient use of keySet iterator instead of entrySet iterator (WMI_WRONG_MAP_ITERATOR)

This method accesses the value of a Map entry, using a key that was retrieved from a keySet iterator. It is more efficient to use an iterator on the entrySet of the map, to avoid the Map.get(key) lookup.

Dm: Hardcoded constant database password (DMI_CONSTANT_DB_PASSWORD)

This code creates a database connect using a hardcoded, constant password. Anyone with access to either the source code or the compiled code can easily learn the password.

Dm: Empty database password (DMI_EMPTY_DB_PASSWORD)

This code creates a database connect using a blank or empty password. This indicates that the database is not protected by a password.

HRS: HTTP cookie formed from untrusted input (HRS_REQUEST_PARAMETER_TO_COOKIE)

This code constructs an HTTP Cookie using an untrusted HTTP parameter. If this cookie is added to an HTTP response, it will allow a HTTP response splitting vulnerability. See http://en.wikipedia.org/wiki/HTTP_response_splitting for more information.

FindBugs looks only for the most blatant, obvious cases of HTTP response splitting. If FindBugs found any, you almost certainly have more vulnerabilities that FindBugs doesn't report. If you are concerned about HTTP response splitting, you should seriously consider using a commercial static analysis or pen-testing tool.

HRS: HTTP Response splitting vulnerability (HRS_REQUEST_PARAMETER_TO_HTTP_HEADER)

This code directly writes an HTTP parameter to an HTTP header, which allows for a HTTP response splitting vulnerability. See http://en.wikipedia.org/wiki/HTTP_response_splitting for more information.

FindBugs looks only for the most blatant, obvious cases of HTTP response splitting. If FindBugs found any, you almost certainly have more vulnerabilities that FindBugs doesn't report. If you are concerned about HTTP response splitting, you should seriously consider using a commercial static analysis or pen-testing tool.

PT: Absolute path traversal in servlet (PT_ABSOLUTE_PATH_TRAVERSAL)

The software uses an HTTP request parameter to construct a pathname that should be within a restricted directory, but it does not properly neutralize absolute path sequences such as "/abs/path" that can resolve to a location that is outside of that directory. See http://cwe.mitre.org/data/definitions/36.html for more information.

FindBugs looks only for the most blatant, obvious cases of absolute path traversal. If FindBugs found any, you almost certainly have more vulnerabilities that FindBugs doesn't report. If you are concerned about absolute path traversal, you should seriously consider using a commercial static analysis or pen-testing tool.

PT: Relative path traversal in servlet (PT_RELATIVE_PATH_TRAVERSAL)

The software uses an HTTP request parameter to construct a pathname that should be within a restricted directory, but it does not properly neutralize sequences such as ".." that can resolve to a location that is outside of that directory. See http://cwe.mitre.org/data/definitions/23.html for more information.

FindBugs looks only for the most blatant, obvious cases of relative path traversal. If FindBugs found any, you almost certainly have more vulnerabilities that FindBugs doesn't report. If you are concerned about relative path traversal, you should seriously consider using a commercial static analysis or pen-testing tool.

SQL: Nonconstant string passed to execute method on an SQL statement (SQL_NONCONSTANT_STRING_PASSED_TO_EXECUTE)

The method invokes the execute method on an SQL statement with a String that seems to be dynamically generated. Consider using a prepared statement instead. It is more efficient and less vulnerable to SQL injection attacks.

SQL: A prepared statement is generated from a nonconstant String (SQL_PREPARED_STATEMENT_GENERATED_FROM_NONCONSTANT_STRING)

The code creates an SQL prepared statement from a nonconstant String. If unchecked, tainted data from a user is used in building this String, SQL injection could be used to make the prepared statement do something unexpected and undesirable.

XSS: JSP reflected cross site scripting vulnerability (XSS_REQUEST_PARAMETER_TO_JSP_WRITER)

This code directly writes an HTTP parameter to JSP output, which allows for a cross site scripting vulnerability. See http://en.wikipedia.org/wiki/Cross-site_scripting for more information.

FindBugs looks only for the most blatant, obvious cases of cross site scripting. If FindBugs found any, you almost certainly have more cross site scripting vulnerabilities that FindBugs doesn't report. If you are concerned about cross site scripting, you should seriously consider using a commercial static analysis or pen-testing tool.

XSS: Servlet reflected cross site scripting vulnerability in error page (XSS_REQUEST_PARAMETER_TO_SEND_ERROR)

This code directly writes an HTTP parameter to a Server error page (using HttpServletResponse.sendError). Echoing this untrusted input allows for a reflected cross site scripting vulnerability. See http://en.wikipedia.org/wiki/Cross-site_scripting for more information.

FindBugs looks only for the most blatant, obvious cases of cross site scripting. If FindBugs found any, you almost certainly have more cross site scripting vulnerabilities that FindBugs doesn't report. If you are concerned about cross site scripting, you should seriously consider using a commercial static analysis or pen-testing tool.

XSS: Servlet reflected cross site scripting vulnerability (XSS_REQUEST_PARAMETER_TO_SERVLET_WRITER)

This code directly writes an HTTP parameter to Servlet output, which allows for a reflected cross site scripting vulnerability. See http://en.wikipedia.org/wiki/Cross-site_scripting for more information.

FindBugs looks only for the most blatant, obvious cases of cross site scripting. If FindBugs found any, you almost certainly have more cross site scripting vulnerabilities that FindBugs doesn't report. If you are concerned about cross site scripting, you should seriously consider using a commercial static analysis or pen-testing tool.

BC: Questionable cast to abstract collection (BC_BAD_CAST_TO_ABSTRACT_COLLECTION)

This code casts a Collection to an abstract collection (such as List, Set, or Map). Ensure that you are guaranteed that the object is of the type you are casting to. If all you need is to be able to iterate through a collection, you don't need to cast it to a Set or List.

BC: Questionable cast to concrete collection (BC_BAD_CAST_TO_CONCRETE_COLLECTION)

This code casts an abstract collection (such as a Collection, List, or Set) to a specific concrete implementation (such as an ArrayList or HashSet). This might not be correct, and it may make your code fragile, since it makes it harder to switch to other concrete implementations at a future point. Unless you have a particular reason to do so, just use the abstract collection class.

BC: Unchecked/unconfirmed cast (BC_UNCONFIRMED_CAST)

This cast is unchecked, and not all instances of the type casted from can be cast to the type it is being cast to. Check that your program logic ensures that this cast will not fail.

BC: Unchecked/unconfirmed cast of return value from method (BC_UNCONFIRMED_CAST_OF_RETURN_VALUE)

This code performs an unchecked cast of the return value of a method. The code might be calling the method in such a way that the cast is guaranteed to be safe, but FindBugs is unable to verify that the cast is safe. Check that your program logic ensures that this cast will not fail.

BC: instanceof will always return true (BC_VACUOUS_INSTANCEOF)

This instanceof test will always return true (unless the value being tested is null). Although this is safe, make sure it isn't an indication of some misunderstanding or some other logic error. If you really want to test the value for being null, perhaps it would be clearer to do better to do a null test rather than an instanceof test.

BSHIFT: Unsigned right shift cast to short/byte (ICAST_QUESTIONABLE_UNSIGNED_RIGHT_SHIFT)

The code performs an unsigned right shift, whose result is then cast to a short or byte, which discards the upper bits of the result. Since the upper bits are discarded, there may be no difference between a signed and unsigned right shift (depending upon the size of the shift).

CD: Test for circular dependencies among classes (CD_CIRCULAR_DEPENDENCY)

This class has a circular dependency with other classes. This makes building these classes difficult, as each is dependent on the other to build correctly. Consider using interfaces to break the hard dependency.

CI: Class is final but declares protected field (CI_CONFUSED_INHERITANCE)

This class is declared to be final, but declares fields to be protected. Since the class is final, it can not be derived from, and the use of protected is confusing. The access modifier for the field should be changed to private or public to represent the true use for the field.

DB: Method uses the same code for two branches (DB_DUPLICATE_BRANCHES)

This method uses the same code to implement two branches of a conditional branch. Check to ensure that this isn't a coding mistake.

DB: Method uses the same code for two switch clauses (DB_DUPLICATE_SWITCH_CLAUSES)

This method uses the same code to implement two clauses of a switch statement. This could be a case of duplicate code, but it might also indicate a coding mistake.

DLS: Dead store to local variable (DLS_DEAD_LOCAL_STORE)

This instruction assigns a value to a local variable, but the value is not read or used in any subsequent instruction. Often, this indicates an error, because the value computed is never used.

Note that Sun's javac compiler often generates dead stores for final local variables. Because FindBugs is a bytecode-based tool, there is no easy way to eliminate these false positives.

DLS: Useless assignment in return statement (DLS_DEAD_LOCAL_STORE_IN_RETURN)

This statement assigns to a local variable in a return statement. This assignment has effect. Please verify that this statement does the right thing.

DLS: Dead store of null to local variable (DLS_DEAD_LOCAL_STORE_OF_NULL)

The code stores null into a local variable, and the stored value is not read. This store may have been introduced to assist the garbage collector, but as of Java SE 6.0, this is no longer needed or useful.

DLS: Dead store to local variable that shadows field (DLS_DEAD_LOCAL_STORE_SHADOWS_FIELD)

This instruction assigns a value to a local variable, but the value is not read or used in any subsequent instruction. Often, this indicates an error, because the value computed is never used. There is a field with the same name as the local variable. Did you mean to assign to that variable instead?

DMI: Code contains a hard coded reference to an absolute pathname (DMI_HARDCODED_ABSOLUTE_FILENAME)

This code constructs a File object using a hard coded to an absolute pathname (e.g., new File("/home/dannyc/workspace/j2ee/src/share/com/sun/enterprise/deployment");

DMI: Non serializable object written to ObjectOutput (DMI_NONSERIALIZABLE_OBJECT_WRITTEN)

This code seems to be passing a non-serializable object to the ObjectOutput.writeObject method. If the object is, indeed, non-serializable, an error will result.

DMI: Invocation of substring(0), which returns the original value (DMI_USELESS_SUBSTRING)

This code invokes substring(0) on a String, which returns the original value.

Dm: Thread passed where Runnable expected (DMI_THREAD_PASSED_WHERE_RUNNABLE_EXPECTED)

A Thread object is passed as a parameter to a method where a Runnable is expected. This is rather unusual, and may indicate a logic error or cause unexpected behavior.

Dm: Call to unsupported method (DMI_UNSUPPORTED_METHOD)

All targets of this method invocation throw an UnsupportedOperationException.

Eq: Class doesn't override equals in superclass (EQ_DOESNT_OVERRIDE_EQUALS)

This class extends a class that defines an equals method and adds fields, but doesn't define an equals method itself. Thus, equality on instances of this class will ignore the identity of the subclass and the added fields. Be sure this is what is intended, and that you don't need to override the equals method. Even if you don't need to override the equals method, consider overriding it anyway to document the fact that the equals method for the subclass just return the result of invoking super.equals(o).

Eq: Unusual equals method (EQ_UNUSUAL)

This class doesn't do any of the patterns we recognize for checking that the type of the argument is compatible with the type of the this object. There might not be anything wrong with this code, but it is worth reviewing.

FE: Test for floating point equality (FE_FLOATING_POINT_EQUALITY)

This operation compares two floating point values for equality. Because floating point calculations may involve rounding, calculated float and double values may not be accurate. For values that must be precise, such as monetary values, consider using a fixed-precision type such as BigDecimal. For values that need not be precise, consider comparing for equality within some range, for example: if ( Math.abs(x - y) < .0000001 ). See the Java Language Specification, section 4.2.4.

FS: Non-Boolean argument formatted using %b format specifier (VA_FORMAT_STRING_BAD_CONVERSION_TO_BOOLEAN)

An argument not of type Boolean is being formatted with a %b format specifier. This won't throw an exception; instead, it will print true for any nonnull value, and false for null. This feature of format strings is strange, and may not be what you intended.

IA: Potentially ambiguous invocation of either an inherited or outer method (IA_AMBIGUOUS_INVOCATION_OF_INHERITED_OR_OUTER_METHOD)

An inner class is invoking a method that could be resolved to either a inherited method or a method defined in an outer class. For example, you invoke foo(17), which is defined in both a superclass and in an outer method. By the Java semantics, it will be resolved to invoke the inherited method, but this may not be want you intend.

If you really intend to invoke the inherited method, invoke it by invoking the method on super (e.g., invoke super.foo(17)), and thus it will be clear to other readers of your code and to FindBugs that you want to invoke the inherited method, not the method in the outer class.

If you call this.foo(17), then the inherited method will be invoked. However, since FindBugs only looks at classfiles, it can't tell the difference between an invocation of this.foo(17) and foo(17), it will still complain about a potential ambiguous invocation.

IC: Initialization circularity (IC_INIT_CIRCULARITY)

A circularity was detected in the static initializers of the two classes referenced by the bug instance.  Many kinds of unexpected behavior may arise from such circularity.

ICAST: Integral division result cast to double or float (ICAST_IDIV_CAST_TO_DOUBLE)

This code casts the result of an integral division (e.g., int or long division) operation to double or float. Doing division on integers truncates the result to the integer value closest to zero. The fact that the result was cast to double suggests that this precision should have been retained. What was probably meant was to cast one or both of the operands to double before performing the division. Here is an example:

int x = 2;
int y = 5;
// Wrong: yields result 0.0
double value1 =  x / y;

// Right: yields result 0.4
double value2 =  x / (double) y;

ICAST: Result of integer multiplication cast to long (ICAST_INTEGER_MULTIPLY_CAST_TO_LONG)

This code performs integer multiply and then converts the result to a long, as in:

    long convertDaysToMilliseconds(int days) { return 1000*3600*24*days; }

If the multiplication is done using long arithmetic, you can avoid the possibility that the result will overflow. For example, you could fix the above code to:

    long convertDaysToMilliseconds(int days) { return 1000L*3600*24*days; }

    static final long MILLISECONDS_PER_DAY = 24L*3600*1000;
    long convertDaysToMilliseconds(int days) { return days * MILLISECONDS_PER_DAY; }

IM: Computation of average could overflow (IM_AVERAGE_COMPUTATION_COULD_OVERFLOW)

The code computes the average of two integers using either division or signed right shift, and then uses the result as the index of an array. If the values being averaged are very large, this can overflow (resulting in the computation of a negative average). Assuming that the result is intended to be nonnegative, you can use an unsigned right shift instead. In other words, rather that using (low+high)/2, use (low+high) >>> 1

This bug exists in many earlier implementations of binary search and merge sort. Martin Buchholz found and fixed it in the JDK libraries, and Joshua Bloch widely publicized the bug pattern.

IM: Check for oddness that won't work for negative numbers (IM_BAD_CHECK_FOR_ODD)

The code uses x % 2 == 1 to check to see if a value is odd, but this won't work for negative numbers (e.g., (-5) % 2 == -1). If this code is intending to check for oddness, consider using x & 1 == 1, or x % 2 != 0.

INT: Integer remainder modulo 1 (INT_BAD_REM_BY_1)

Any expression (exp % 1) is guaranteed to always return zero. Did you mean (exp & 1) or (exp % 2) instead?

INT: Vacuous bit mask operation on integer value (INT_VACUOUS_BIT_OPERATION)

This is an integer bit operation (and, or, or exclusive or) that doesn't do any useful work (e.g., v & 0xffffffff).

INT: Vacuous comparison of integer value (INT_VACUOUS_COMPARISON)

There is an integer comparison that always returns the same value (e.g., x <= Integer.MAX_VALUE).

MTIA: Class extends Servlet class and uses instance variables (MTIA_SUSPECT_SERVLET_INSTANCE_FIELD)

This class extends from a Servlet class, and uses an instance member variable. Since only one instance of a Servlet class is created by the J2EE framework, and used in a multithreaded way, this paradigm is highly discouraged and most likely problematic. Consider only using method local variables.

MTIA: Class extends Struts Action class and uses instance variables (MTIA_SUSPECT_STRUTS_INSTANCE_FIELD)

This class extends from a Struts Action class, and uses an instance member variable. Since only one instance of a struts Action class is created by the Struts framework, and used in a multithreaded way, this paradigm is highly discouraged and most likely problematic. Consider only using method local variables. Only instance fields that are written outside of a monitor are reported.

NP: Dereference of the result of readLine() without nullcheck (NP_DEREFERENCE_OF_READLINE_VALUE)

The result of invoking readLine() is dereferenced without checking to see if the result is null. If there are no more lines of text to read, readLine() will return null and dereferencing that will generate a null pointer exception.

NP: Immediate dereference of the result of readLine() (NP_IMMEDIATE_DEREFERENCE_OF_READLINE)

The result of invoking readLine() is immediately dereferenced. If there are no more lines of text to read, readLine() will return null and dereferencing that will generate a null pointer exception.

NP: Load of known null value (NP_LOAD_OF_KNOWN_NULL_VALUE)

The variable referenced at this point is known to be null due to an earlier check against null. Although this is valid, it might be a mistake (perhaps you intended to refer to a different variable, or perhaps the earlier check to see if the variable is null should have been a check to see if it was nonnull).

NP: Method tightens nullness annotation on parameter (NP_METHOD_PARAMETER_TIGHTENS_ANNOTATION)

A method should always implement the contract of a method it overrides. Thus, if a method takes a parameter that is marked as @Nullable, you shouldn't override that method in a subclass with a method where that parameter is @Nonnull. Doing so violates the contract that the method should handle a null parameter.

NP: Method relaxes nullness annotation on return value (NP_METHOD_RETURN_RELAXING_ANNOTATION)

A method should always implement the contract of a method it overrides. Thus, if a method takes is annotated as returning a @Nonnull value, you shouldn't override that method in a subclass with a method annotated as returning a @Nullable or @CheckForNull value. Doing so violates the contract that the method shouldn't return null.

NP: Possible null pointer dereference due to return value of called method (NP_NULL_ON_SOME_PATH_FROM_RETURN_VALUE)

The return value from a method is dereferenced without a null check, and the return value of that method is one that should generally be checked for null. This may lead to a NullPointerException when the code is executed.

NP: Possible null pointer dereference on branch that might be infeasible (NP_NULL_ON_SOME_PATH_MIGHT_BE_INFEASIBLE)

There is a branch of statement that, if executed, guarantees that a null value will be dereferenced, which would generate a NullPointerException when the code is executed. Of course, the problem might be that the branch or statement is infeasible and that the null pointer exception can't ever be executed; deciding that is beyond the ability of FindBugs. Due to the fact that this value had been previously tested for nullness, this is a definite possibility.

NP: Parameter must be nonnull but is marked as nullable (NP_PARAMETER_MUST_BE_NONNULL_BUT_MARKED_AS_NULLABLE)

This parameter is always used in a way that requires it to be nonnull, but the parameter is explicitly annotated as being Nullable. Either the use of the parameter or the annotation is wrong.

NP: Read of unwritten public or protected field (NP_UNWRITTEN_PUBLIC_OR_PROTECTED_FIELD)

The program is dereferencing a public or protected field that does not seem to ever have a non-null value written to it. Unless the field is initialized via some mechanism not seen by the analysis, dereferencing this value will generate a null pointer exception.

NS: Potentially dangerous use of non-short-circuit logic (NS_DANGEROUS_NON_SHORT_CIRCUIT)

This code seems to be using non-short-circuit logic (e.g., & or |) rather than short-circuit logic (&& or ||). In addition, it seem possible that, depending on the value of the left hand side, you might not want to evaluate the right hand side (because it would have side effects, could cause an exception or could be expensive.

Non-short-circuit logic causes both sides of the expression to be evaluated even when the result can be inferred from knowing the left-hand side. This can be less efficient and can result in errors if the left-hand side guards cases when evaluating the right-hand side can generate an error.

See the Java Language Specification for details

NS: Questionable use of non-short-circuit logic (NS_NON_SHORT_CIRCUIT)

This code seems to be using non-short-circuit logic (e.g., & or |) rather than short-circuit logic (&& or ||). Non-short-circuit logic causes both sides of the expression to be evaluated even when the result can be inferred from knowing the left-hand side. This can be less efficient and can result in errors if the left-hand side guards cases when evaluating the right-hand side can generate an error.

See the Java Language Specification for details

PS: Class exposes synchronization and semaphores in its public interface (PS_PUBLIC_SEMAPHORES)

This class uses synchronization along with wait(), notify() or notifyAll() on itself (the this reference). Client classes that use this class, may, in addition, use an instance of this class as a synchronizing object. Because two classes are using the same object for synchronization, Multithread correctness is suspect. You should not synchronize nor call semaphore methods on a public reference. Consider using a internal private member variable to control synchronization.

PZLA: Consider returning a zero length array rather than null (PZLA_PREFER_ZERO_LENGTH_ARRAYS)

It is often a better design to return a length zero array rather than a null reference to indicate that there are no results (i.e., an empty list of results). This way, no explicit check for null is needed by clients of the method.

On the other hand, using null to indicate "there is no answer to this question" is probably appropriate. For example, File.listFiles() returns an empty list if given a directory containing no files, and returns null if the file is not a directory.

QF: Complicated, subtle or wrong increment in for-loop (QF_QUESTIONABLE_FOR_LOOP)

Are you sure this for loop is incrementing the correct variable? It appears that another variable is being initialized and checked by the for loop.

RCN: Redundant comparison of non-null value to null (RCN_REDUNDANT_COMPARISON_OF_NULL_AND_NONNULL_VALUE)

This method contains a reference known to be non-null with another reference known to be null.

RCN: Redundant comparison of two null values (RCN_REDUNDANT_COMPARISON_TWO_NULL_VALUES)

This method contains a redundant comparison of two references known to both be definitely null.

RCN: Redundant nullcheck of value known to be non-null (RCN_REDUNDANT_NULLCHECK_OF_NONNULL_VALUE)

This method contains a redundant check of a known non-null value against the constant null.

RCN: Redundant nullcheck of value known to be null (RCN_REDUNDANT_NULLCHECK_OF_NULL_VALUE)

This method contains a redundant check of a known null value against the constant null.

REC: Exception is caught when Exception is not thrown (REC_CATCH_EXCEPTION)

This method uses a try-catch block that catches Exception objects, but Exception is not thrown within the try block, and RuntimeException is not explicitly caught. It is a common bug pattern to say try { ... } catch (Exception e) { something } as a shorthand for catching a number of types of exception each of whose catch blocks is identical, but this construct also accidentally catches RuntimeException as well, masking potential bugs.

A better approach is to either explicitly catch the specific exceptions that are thrown, or to explicitly catch RuntimeException exception, rethrow it, and then catch all non-Runtime Exceptions, as shown below:

  try {
    ...
  } catch (RuntimeException e) {
    throw e;
  } catch (Exception e) {
    ... deal with all non-runtime exceptions ...
  }

RI: Class implements same interface as superclass (RI_REDUNDANT_INTERFACES)

This class declares that it implements an interface that is also implemented by a superclass. This is redundant because once a superclass implements an interface, all subclasses by default also implement this interface. It may point out that the inheritance hierarchy has changed since this class was created, and consideration should be given to the ownership of the interface's implementation.

RV: Method checks to see if result of String.indexOf is positive (RV_CHECK_FOR_POSITIVE_INDEXOF)

The method invokes String.indexOf and checks to see if the result is positive or non-positive. It is much more typical to check to see if the result is negative or non-negative. It is positive only if the substring checked for occurs at some place other than at the beginning of the String.

RV: Method discards result of readLine after checking if it is nonnull (RV_DONT_JUST_NULL_CHECK_READLINE)

The value returned by readLine is discarded after checking to see if the return value is non-null. In almost all situations, if the result is non-null, you will want to use that non-null value. Calling readLine again will give you a different line.

RV: Remainder of hashCode could be negative (RV_REM_OF_HASHCODE)

This code computes a hashCode, and then computes the remainder of that value modulo another value. Since the hashCode can be negative, the result of the remainder operation can also be negative.

Assuming you want to ensure that the result of your computation is nonnegative, you may need to change your code. If you know the divisor is a power of 2, you can use a bitwise and operator instead (i.e., instead of using x.hashCode()%n, use x.hashCode()&(n-1). This is probably faster than computing the remainder as well. If you don't know that the divisor is a power of 2, take the absolute value of the result of the remainder operation (i.e., use Math.abs(x.hashCode()%n)

RV: Remainder of 32-bit signed random integer (RV_REM_OF_RANDOM_INT)

This code generates a random signed integer and then computes the remainder of that value modulo another value. Since the random number can be negative, the result of the remainder operation can also be negative. Be sure this is intended, and strongly consider using the Random.nextInt(int) method instead.

RV: Method ignores return value, is this OK? (RV_RETURN_VALUE_IGNORED_INFERRED)

This code calls a method and ignores the return value. The return value is the same type as the type the method is invoked on, and from our analysis it looks like the return value might be important (e.g., like ignoring the return value of String.toLowerCase()).

We are guessing that ignoring the return value might be a bad idea just from a simple analysis of the body of the method. You can use a @CheckReturnValue annotation to instruct FindBugs as to whether ignoring the return value of this method is important or acceptable.

Please investigate this closely to decide whether it is OK to ignore the return value.

SA: Double assignment of field (SA_FIELD_DOUBLE_ASSIGNMENT)

This method contains a double assignment of a field; e.g.

  int x,y;
  public void foo() {
    x = x = 17;
  }

Assigning to a field twice is useless, and may indicate a logic error or typo.

SA: Double assignment of local variable (SA_LOCAL_DOUBLE_ASSIGNMENT)

This method contains a double assignment of a local variable; e.g.

  public void foo() {
    int x,y;
    x = x = 17;
  }

Assigning the same value to a variable twice is useless, and may indicate a logic error or typo.

SA: Self assignment of local variable (SA_LOCAL_SELF_ASSIGNMENT)

This method contains a self assignment of a local variable; e.g.

  public void foo() {
    int x = 3;
    x = x;
  }

Such assignments are useless, and may indicate a logic error or typo.

SF: Switch statement found where one case falls through to the next case (SF_SWITCH_FALLTHROUGH)

This method contains a switch statement where one case branch will fall through to the next case. Usually you need to end this case with a break or return.

SF: Switch statement found where default case is missing (SF_SWITCH_NO_DEFAULT)

This method contains a switch statement where default case is missing. Usually you need to provide a default case.

Because the analysis only looks at the generated bytecode, this warning can be incorrect triggered if the default case is at the end of the switch statement and doesn't end with a break statement.

ST: Write to static field from instance method (ST_WRITE_TO_STATIC_FROM_INSTANCE_METHOD)

This instance method writes to a static field. This is tricky to get correct if multiple instances are being manipulated, and generally bad practice.

Se: Private readResolve method not inherited by subclasses (SE_PRIVATE_READ_RESOLVE_NOT_INHERITED)

This class defines a private readResolve method. Since it is private, it won't be inherited by subclasses. This might be intentional and OK, but should be reviewed to ensure it is what is intended.

Se: Transient field of class that isn't Serializable. (SE_TRANSIENT_FIELD_OF_NONSERIALIZABLE_CLASS)

The field is marked as transient, but the class isn't Serializable, so marking it as transient has absolutely no effect. This may be leftover marking from a previous version of the code in which the class was transient, or it may indicate a misunderstanding of how serialization works.

TQ: Value required to have type qualifier, but marked as unknown (TQ_EXPLICIT_UNKNOWN_SOURCE_VALUE_REACHES_ALWAYS_SINK)

A value is used in a way that requires it to be always be a value denoted by a type qualifier, but there is an explicit annotation stating that it is not known where the value is required to have that type qualifier. Either the usage or the annotation is incorrect.

TQ: Value required to not have type qualifier, but marked as unknown (TQ_EXPLICIT_UNKNOWN_SOURCE_VALUE_REACHES_NEVER_SINK)

A value is used in a way that requires it to be never be a value denoted by a type qualifier, but there is an explicit annotation stating that it is not known where the value is prohibited from having that type qualifier. Either the usage or the annotation is incorrect.

UCF: Useless control flow (UCF_USELESS_CONTROL_FLOW)

This method contains a useless control flow statement, where control flow continues onto the same place regardless of whether or not the branch is taken. For example, this is caused by having an empty statement block for an if statement:

    if (argv.length == 0) {
    // TODO: handle this case
    }

UCF: Useless control flow to next line (UCF_USELESS_CONTROL_FLOW_NEXT_LINE)

This method contains a useless control flow statement in which control flow follows to the same or following line regardless of whether or not the branch is taken. Often, this is caused by inadvertently using an empty statement as the body of an if statement, e.g.:

    if (argv.length == 1);
        System.out.println("Hello, " + argv[0]);

USM: Abstract Method is already defined in implemented interface (USM_USELESS_ABSTRACT_METHOD)

This abstract method is already defined in an interface that is implemented by this abstract class. This method can be removed, as it provides no additional value.

USM: Method superfluously delegates to parent class method (USM_USELESS_SUBCLASS_METHOD)

This derived method merely calls the same superclass method passing in the exact parameters received. This method can be removed, as it provides no additional value.

UrF: Unread public/protected field (URF_UNREAD_PUBLIC_OR_PROTECTED_FIELD)

This field is never read.  The field is public or protected, so perhaps it is intended to be used with classes not seen as part of the analysis. If not, consider removing it from the class.

UuF: Unused public or protected field (UUF_UNUSED_PUBLIC_OR_PROTECTED_FIELD)

This field is never used.  The field is public or protected, so perhaps it is intended to be used with classes not seen as part of the analysis. If not, consider removing it from the class.

UwF: Field not initialized in constructor but dereferenced without null check (UWF_FIELD_NOT_INITIALIZED_IN_CONSTRUCTOR)

This field is never initialized within any constructor, and is therefore could be null after the object is constructed. Elsewhere, it is loaded and dereferenced without a null check. This could be a either an error or a questionable design, since it means a null pointer exception will be generated if that field is dereferenced before being initialized.

UwF: Unwritten public or protected field (UWF_UNWRITTEN_PUBLIC_OR_PROTECTED_FIELD)

No writes were seen to this public/protected field.  All reads of it will return the default value. Check for errors (should it have been initialized?), or remove it if it is useless.

XFB: Method directly allocates a specific implementation of xml interfaces (XFB_XML_FACTORY_BYPASS)

This method allocates a specific implementation of an xml interface. It is preferable to use the supplied factory classes to create these objects so that the implementation can be changed at runtime. See

• javax.xml.parsers.DocumentBuilderFactory
• javax.xml.parsers.SAXParserFactory
• javax.xml.transform.TransformerFactory
• org.w3c.dom.Document.createXXXX

for details.

Send comments to findbugs@cs.umd.edu