Lines Matching refs:serial

161   a serial UART.  The default is TRUE for enabled when the BUILDTARGET is DEBUG
177   disabled so there is not boot time overhead from the serial UART for logging
285 After the FLASH is updated on Galileo, a serial cable is connected between the
286 host system and the Galileo target.  A serial terminal emulator (such as
288 the logging messages from DEBUG() macros and the serial console for the UEFI
291 The default serial communication parameters for the Intel(R) Galileo Gen 2
296 The default serial communication parameters for the Intel(R) Galileo Development
300 configuration files are recommended for UEFI serial console compatibility.
354 * KEYBOARD.CNF - Add UEFI serial console sequences for F1..F10
384 * [Tera Term](https://en.osdn.jp/projects/ttssh2/releases/) or other serial
440 The following batch file starts Tera Term serial console on COM5 at 921600 baud,
530 * GRUB should run and Linux should boot with serial log messages.
531 * When the serial log messages stop, change the Tera Term baud rate to 115200