Lines Matching refs:n
29 #string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"
30 …ng STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n"
31 #string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"
32 #string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments\r\n"
33 #string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments\r\n"
34 #string STR_GEN_INV_HANDLE #language en-US "%H%s%N: Handle - '%H%s%N' not found\r\n"
35 …STR_GEN_PARAM_CONFLICT #language en-US "%H%s%N: Flags conflict with - '%H%s%N' and '%H%s%N'\r\n"
36 #string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n"
37 #string STR_GEN_HANDLE_NOT #language en-US "%H%s%N: Handle [%H%02x%N] is not a valid %s\r\n"
38 … STR_GEN_HANDLE_REQ #language en-US "%H%s%N: Handle required with the specified options\r\n"
39 …ROTOCOL_NF #language en-US "%H%s%N: The protocol '%H%s%N' is required and not found (%g)\r\n"
40 #string STR_GEN_FIND_FAIL #language en-US "%H%s%N: File not found - '%H%s%N'\r\n"
41 #string STR_GEN_FILE_EXIST #language en-US "%H%s%N: File already exists - '%H%s%N'\r\n"
42 #string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n"
43 #string STR_FILE_WRITE_FAIL #language en-US "%H%s%N: Write file error - '%H%s%N'\r\n"
44 #string STR_FILE_READ_FAIL #language en-US "%H%s%N: Read file error - '%H%s%N'\r\n"
45 #string STR_GEN_OUT_MEM #language en-US "%H%s%N: Memory allocation was not successful\r\n"
46 …ROR #language en-US "%H%s%N: UEFI function '%H%s%N' returned an incorrect value for: %s (%x)\r\n"
47 #string STR_GEN_UEFI_FUNC_WARN #language en-US "%H%s%N: UEFI function '%H%s%N' returned: %r\r\n"
48 #string STR_GEN_SFO_HEADER #language en-US "ShellCommand,"%s"\r\n"
50 #string STR_DRVDIAG_HEADER #language en-US "%EAvailable Diagnostics%N.\r\n"
52 #string STR_DRVDIAG_DRIVER_NO_HANDLES #language en-US "No controller handles found.\r\n"
54 #string STR_HANDLE_RESULT #language en-US "%H%s%N - Handle [%H%02x%N] Result %r.\r\n"
55 …ng STR_3P_RESULT #language en-US "%H%s%N - (%H%02x%N,%H%02x%N,%H%02x%N) Result %r.\r\n"
56 #string STR_CONNECT_NONE #language en-US "%HConnect%N No drivers could be connected.\r\n"
58 …ring STR_DRVCFG_NONE_FOUND #language en-US "%HDrvCfg%N No configurable devices were found.\r\n"
59 #string STR_DRVCFG_COMP #language en-US "%HDrvCfg%N - operation complete.\r\n"
60 …ng STR_DRVCFG_DONE_HII #language en-US "Handle[%H%02x%N] successfully updated from file.\r\n"
61 …VCFG_LINE_HII #language en-US "Handle[%H%02x%N] HII Config Access\r\n"
65 #string STR_DRVCFG_RESTART_S #language en-US "Restart %s\r\n"
66 #string STR_DRVCFG_STOP #language en-US "Stop Controller\n"
68 #string STR_DRVCFG_NONE #language en-US "None\n"
69 #string STR_DRVCFG_CTLR_S #language en-US "Controller %s\n"
70 …tring STR_DRVCFG_FORCE_D #language en-US "Force Default Configuration to DefaultType %08x\n"
71 #string STR_DRVCFG_VALIDATE #language en-US "Validate Configuration Options\n"
72 #string STR_DRVCFG_SET #language en-US "Set Configuration Options\n"
73 …ing STR_DRVCFG_NOT_SUPPORT #language en-US "Handle [%H%02x%N] does not support configuration.\n"
75 #string STR_DRVCFG_NOT_SET #language en-US " - Options not set. Status = %r\n"
77 #string STR_DRVCFG_FORCE_FAILED #language en-US " - Force of defaults failed. Status = %r\n"
78 #string STR_DRVCFG_OPTIONS_VALID #language en-US " - Options valid\n"
79 #string STR_DRVCFG_OPTIONS_INV #language en-US " - Options not valid. Status = %r\n"
80 …FG_IN_FILE_NF #language en-US "DevicePath '%B%s%N' from file not found in HII DB. Skipped.\r\n"
84 " T D\r\n"
85 " Y C I\r\n"
86 " P F A\r\n"
87 "CTRL E G G #P #D #C Device Name\r\n"
88 "==== = = = == == === =========================================================\r\n"
89 #string STR_DEVICES_ITEM_LINE #language en-US "%H%4x%N %1c %1c %1c %2d %2d %3d %s\r\n"
90 …STR_DEVICES_ITEM_LINE_SFO #language en-US "DevicesInfo,"%x","%c","%c","%c","%d","%d","%d","%s"\r\n"
93 " T D\r\n"
94 " Y C I\r\n"
95 " P F A\r\n"
96 "DRV VERSION E G G #D #C DRIVER NAME IMAGE PATH\r\n"
97 "=== ======== = = = === === =================================== ==========\r\n"
98 #string STR_DRIVERS_ITEM_LINE #language en-US "%H%3x%N %08x %1c %1c %1c %3d %3d %-35s %s\r\n"
99 …RIVERS_ITEM_LINE_SFO #language en-US "DriversInfo,"%x","%x","%c","%c","%c","%d","%d","%s","%s"\r\n"
101 #string STR_DH_NO_GUID_FOUND #language en-US "Protocol ID '%s' could not be identified.\r\n"
102 #string STR_DH_SFO_OUTPUT #language en-US "%s, %s, %H%02x%N, %s, &s\r\n"
103 #string STR_DH_OUTPUT #language en-US "%H%02x%N: %s\r\n"
104 #string STR_DH_OUTPUT_SINGLE #language en-US "%H%02x%N: %x\r\n%s"
105 #string STR_DH_OUTPUT_SFO #language en-US "%s, %s, %s, %H%02x%N, %s, %s\r\n"
106 #string STR_DH_OUTPUT_DRIVER1 #language en-US " Controller Name : %B%s%N\r\n"
107 #string STR_DH_OUTPUT_DRIVER2 #language en-US " Device Path : %B%s%N\r\n"
108 " Controller Type : %B%s%N\r\n"
109 " Configuration : %B%s%N\r\n"
110 " Diagnostics : %B%s%N\r\n"
111 #string STR_DH_OUTPUT_DRIVER3 #language en-US " Managed by : %B%s%N\r\n"
112 #string STR_DH_OUTPUT_DRIVER4A #language en-US " Drv[%H%02x%N] : Image(%B%s%N)r\n"
113 #string STR_DH_OUTPUT_DRIVER4B #language en-US " Drv[%H%02x%N] : %B%s%N\r\n"
114 #string STR_DH_OUTPUT_DRIVER5 #language en-US " Parent Controllers : %B%s%N\r\n"
115 #string STR_DH_OUTPUT_DRIVER5B #language en-US " Parent[%H%02x%N] : %B%s%N\r\n"
116 #string STR_DH_OUTPUT_DRIVER6 #language en-US " Child Controllers : %B%s%N\r\n"
117 #string STR_DH_OUTPUT_DRIVER6B #language en-US " Child[%H%02x%N] : %B%s%N\r\n"
118 #string STR_DH_OUTPUT_DRIVER7 #language en-US " Driver Name : %B%s%N\r\n"
119 #string STR_DH_OUTPUT_DRIVER7B #language en-US " Driver Image Name : %B%s%N\r\n"
120 #string STR_DH_OUTPUT_DRIVER8 #language en-US " Driver Version : %B%08x%N\r\n"
121 " Driver Type : %B%s%N\r\n"
122 " Configuration : %B%s%N\r\n"
123 " Diagnostics : %B%s%N\r\n"
124 #string STR_DH_OUTPUT_DRIVER9 #language en-US " Managing : %B%s%N\r\n"
125 #string STR_DH_OUTPUT_DRIVER9B #language en-US " Ctrl[%H%02x%N] : %B%s%N\r\n"
127 #string STR_DEV_TREE_OUTPUT #language en-US "Ctrl[%H%02x%N] %s\r\n"
129 #string STR_UNLOAD_CONF #language en-US "%HUnload%N - Handle [%H%02x%N]. [y/n]?\r\n"
131 "Handle [%H%02x%N] (%08x)\r\n"
132 " Image (%08x)\r\n"
133 " ParentHandle..: %08x\r\n"
134 " SystemTable...: %08x\r\n"
135 " DeviceHandle..: %08x\r\n"
136 " FilePath......: %s\r\n"
137 " PDBFileName...: %a\r\n"
138 " ImageBase.....: %08x\r\n"
139 " ImageSize.....: %Ld\r\n"
140 " CodeType......: %s\r\n"
141 " DataType......: %s\r\n"
143 #string STR_OPENINFO_HEADER_LINE #language en-US "Handle %H%02x%N (%H%0p%N)\r\n"
144 …FO_LINE #language en-US " Drv[%H%02x%N] Ctrl[%H%02x%N] Cnt(%H%02x%N) %H%s Image%N(%s)\r\n"
145 …OPENINFO_MIN_LINE #language en-US " Drv[%H%02x%N] Ctrl[ ] Cnt(%H%02x%N) %H%s Image%N(%s)\r\n"
147 …ring STR_DRV_DIAG_ITEM_LINE #language en-US " Drv[%H%02x%N] Ctrl[%H%02x%N] Child[%H%02x%N]\r\n"
150 ".TH drvcfg 0 "configure a UEFI driver."\r\n"
151 ".SH NAME\r\n"
152 "Invokes the driver configuration.\r\n"
153 ".SH SYNOPSIS\r\n"
154 " \r\n"
155 "DRVCFG [-l XXX] [-c] [-f <Type>|-v|-s] \r\n"
156 " [DriverHandle [DeviceHandle [ChildHandle]]] [-i filename] [-o filename]\r\n"
157 ".SH OPTIONS\r\n"
158 " \r\n"
159 " -c - Configures all child devices.\r\n"
160 " -l - Configures using the ISO 3066 language specified by XXX.\r\n"
161 " -f - Forces defaults.\r\n"
162 " -v - Validates options.\r\n"
163 " -s - Sets options.\r\n"
164 " -i - Receives configuration updates from an input file.\r\n"
165 " -o - Exports the settings of the specified driver instance to a\r\n"
166 " file.\r\n"
167 " Type - Specifies the type of default configuration options to force on the\r\n"
168 " controller.\r\n"
169 " 0 - Standard Defaults.\r\n"
170 " 1 - Manufacturing Defaults.\r\n"
171 " 2 - Safe Defaults.\r\n"
172 " 4000-FFFF - Custom Defaults.\r\n"
173 " DriverHandle - Specifies the the handle of the driver to configure.\r\n"
174 " DeviceHandle - Specifies the handle of a device that the DriverHandle is managing.\r\n"
175 " ChildHandle - Specifies the handle of a device that is a child of the DeviceHandle. \r\n"
176 ".SH DESCRIPTION\r\n"
177 " \r\n"
178 "NOTES:\r\n"
179 " 1. Default Type:\r\n"
180 " 0 - Safe Defaults. Places a controller in a safe configuration with\r\n"
181 " the greatest probability of functioning correctly in a platform.\r\n"
182 " 1 - Manufacturing Defaults. Optional type that places the controller in\r\n"
183 " a configuration suitable for a manufacturing and test environment.\r\n"
184 " 2 - Custom Defaults. Optional type that places the controller in a\r\n"
185 " custom configuration.\r\n"
186 " 3 - Performance Defaults. Optional type that places the controller in a\r\n"
187 " configuration that maximizes the controller's performance in a \r\n"
188 " platform. \r\n"
189 " Other Value - Depends on the driver's implementation.\r\n"
190 ".SH EXAMPLES\r\n"
191 " \r\n"
192 "EXAMPLES:\r\n"
193 " * To display the list of devices that are available for configuration:\r\n"
194 " Shell> drvcfg\r\n"
195 " \r\n"
196 " * To display the list of devices and child devices that are available for\r\n"
197 " configuration:\r\n"
198 " Shell> drvcfg -c\r\n"
199 " \r\n"
200 " * To force defaults on all devices:\r\n"
201 " Shell> drvcfg -f 0\r\n"
202 " \r\n"
203 " * To force defaults on all devices that are managed by driver 0x17:\r\n"
204 " Shell> drvcfg -f 0 17\r\n"
205 " \r\n"
206 " * To force defaults on device 0x28 that is managed by driver 0x17:\r\n"
207 " Shell> drvcfg -f 0 17 28\r\n"
208 " \r\n"
209 " * To force defaults on all child devices of device 0x28 that is managed by\r\n"
210 " driver 0x17:\r\n"
211 " Shell> drvcfg -f 0 17 28 -c\r\n"
212 " \r\n"
213 " * To force defaults on child device 0x30 of device 0x28 that is managed by\r\n"
214 " driver 0x17:\r\n"
215 " Shell> drvcfg -f 0 17 28 30\r\n"
216 " \r\n"
217 " * To validate options on all devices:\r\n"
218 " Shell> drvcfg -v\r\n"
219 " \r\n"
220 " * To validate options on all devices that are managed by driver 0x17:\r\n"
221 " Shell> drvcfg -v 17\r\n"
222 " \r\n"
223 " * To validate options on device 0x28 that is managed by driver 0x17:\r\n"
224 " Shell> drvcfg -v 17 28\r\n"
225 " \r\n"
226 " * To validate options on all child devices of device 0x28 that is managed by\r\n"
227 " driver 0x17:\r\n"
228 " Shell> drvcfg -v 17 28 -c\r\n"
229 " \r\n"
230 " * To validate options on child device 0x30 of device 0x28 that is managed by\r\n"
231 " driver 0x17:\r\n"
232 " Shell> drvcfg -v 17 28 30\r\n"
233 " \r\n"
234 " * To set options on device 0x28 that is managed by driver 0x17: \r\n"
235 " Shell> drvcfg -s 17 28\r\n"
236 " \r\n"
237 " * To set options on child device 0x30 of device 0x28 that is managed by\r\n"
238 " driver 0x17:\r\n"
239 " Shell> drvcfg -s 17 28 30\r\n"
240 " \r\n"
241 " * To set options on device 0x28 that is managed by driver 0x17 in English:\r\n"
242 " Shell> drvcfg -s 17 28 -l eng\r\n"
243 " \r\n"
244 " * To set options on device 0x28 that is managed by driver 0x17 in Spanish:\r\n"
245 " Shell> drvcfg -s 17 28 -l spa\r\n"
246 ".SH RETURNVALUES\r\n"
247 " \r\n"
248 "RETURN VALUES:\r\n"
249 " SHELL_SUCCESS The action was completed as requested.\r\n"
250 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
251 " violation.\r\n"
252 " SHELL_UNSUPPORTED The action as requested was unsupported.\r\n"
253 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
254 " formatted or its value was out of bounds.\r\n"
257 ".TH drivers 0 "display a list of drivers"\r\n"
258 ".SH NAME\r\n"
259 "Displays the UEFI driver list.\r\n"
260 ".SH SYNOPSIS\r\n"
261 " \r\n"
262 "DRIVERS [-l XXX] [-sfo] \r\n"
263 ".SH OPTIONS\r\n"
264 " \r\n"
265 " -l - Displays drivers using the specified language (e.g. ISO 639-2) \r\n"
266 " -sfo - Displays information as described in Standard-Format Output.\r\n"
267 ".SH DESCRIPTION\r\n"
268 " \r\n"
269 "NOTES:\r\n"
270 " 1. This command displays a list of information for drivers that follow the\r\n"
271 " UEFI Driver Model in the UEFI environment. The list includes:\r\n"
272 " DRV - The handle number of the UEFI driver.\r\n"
273 " VERSION - The version number of the UEFI driver.\r\n"
274 " TYPE - The driver type:\r\n"
275 " [B] - Bus Driver\r\n"
276 " [D] - Device Driver\r\n"
277 " CFG - Driver supports the Driver Configuration Protocol.\r\n"
278 " DIAG - Driver supports the Driver Diagnostics Protocol.\r\n"
279 " #D - The number of devices that this driver is managing.\r\n"
280 " #C - The number of child devices that this driver has produced.\r\n"
281 " DRIVER NAME - The name of the driver from the Component Name Protocol.\r\n"
282 " IMAGE PATH - The file path from which the driver was loaded.\r\n"
283 ".SH EXAMPLES\r\n"
284 " \r\n"
285 "EXAMPLES:\r\n"
286 " * To display the list:\r\n"
287 " Shell> drivers\r\n"
288 ".SH RETURNVALUES\r\n"
289 " \r\n"
290 "RETURN VALUES:\r\n"
291 " SHELL_SUCCESS The action was completed as requested.\r\n"
292 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
293 " violation.\r\n"
294 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
295 " formatted or its value was out of bounds.\r\n"
298 ".TH disconnect 0 "disconnect a driver"\r\n"
299 ".SH NAME\r\n"
300 "Disconnects one or more drivers from the specified devices. \r\n"
301 ".SH SYNOPSIS\r\n"
302 " \r\n"
303 "DISCONNECT DeviceHandle [DriverHandle [ChildHandle]] \r\n"
304 "DISCONNECT [-r] [-nc] \r\n"
305 ".SH OPTIONS\r\n"
306 " \r\n"
307 "NOTES:\r\n"
308 " -r - Disconnects all drivers from all devices, then reconnect\r\n"
309 " consoles.\r\n"
310 " -nc - Do not reconnect the console devices.\r\n"
311 " DeviceHandle - Specifies a device handle (a hexadecimal number). If not\r\n"
312 " specified, then disconnect DriverHandle.\r\n"
313 " DriverHandle - Specifies a driver handle (a hexadecimal number).\r\n"
314 " ChildHandle - Specifies a child handle of a device (a hexadecimal number).\r\n"
315 " If not specified, then all child handles of DeviceHandle are\r\n"
316 " disconnected.\r\n"
317 ".SH DESCRIPTION\r\n"
318 " \r\n"
319 "NOTES:\r\n"
320 " 1. If the 'DriverHandle' parameter is not specified, the default is to\r\n"
321 " disconnect 'DeviceHandle'.\r\n"
322 " 2. If the 'ChildHandle' parameter is not specified, the default is to\r\n"
323 " disconnect all child handles of the 'DeviceHandle'.\r\n"
324 " 3. If the '-r' option is specified, all consoles and drivers will be\r\n"
325 " disconnected from all devices in the system, then consoles are\r\n"
326 " reconnected. If the '-nc' option is also spcified, then console devices\r\n"
327 " are not reconnected.\r\n"
328 " 4. This command does not support output redirection.\r\n"
329 ".SH EXAMPLES\r\n"
330 " \r\n"
331 "EXAMPLES:\r\n"
332 " * To disconnect all drivers from all devices, then reconnect console\r\n"
333 " devices:\r\n"
334 " Shell> disconnect -r\r\n"
335 " \r\n"
336 " * To disconnect all drivers from all devices, including console devices:\r\n"
337 " Shell> disconnect -r -nc\r\n"
338 " \r\n"
339 " * To disconnect all drivers from device 0x28:\r\n"
340 " fs0:\> disconnect 28\r\n"
341 " \r\n"
342 " * To disconnect driver 0x17 from device 0x28:\r\n"
343 " fs0:\> disconnect 28 17\r\n"
344 " \r\n"
345 " * To disconnect driver 0x17 from controlling the child 0x32 of device 0x28:\r\n"
346 " fs0:\> disconnect 28 17 32\r\n"
347 ".SH RETURNVALUES\r\n"
348 " \r\n"
349 "RETURN VALUES:\r\n"
350 " SHELL_SUCCESS The action was completed as requested.\r\n"
351 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
352 " violation.\r\n"
353 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
354 " formatted or its value was out of bounds.\r\n"
357 ".TH dh 0 "displays list of handles"\r\n"
358 ".SH NAME\r\n"
359 "Displays the device handles in the UEFI environment. \r\n"
360 ".SH SYNOPSIS\r\n"
361 " \r\n"
362 "DH [-l <lang>] [handle | -p <prot_id>] [-d] [-v] \r\n"
363 ".SH OPTIONS\r\n"
364 " \r\n"
365 " -p - Dumps all handles of a protocol specified by the GUID.\r\n"
366 " -d - Dumps UEFI Driver Model-related information.\r\n"
367 " -l - Dumps information using the language codes (e.g. ISO 639-2).\r\n"
368 " -sfo - Displays information as described in Standard-Format Output.\r\n"
369 " -v - Dumps verbose information about a specific handle.\r\n"
370 " handle - Specifies a handle to dump information about (a hexadecimal number).\r\n"
371 " If not present, then all information will be dumped.\r\n"
372 ".SH DESCRIPTION\r\n"
373 " \r\n"
374 "NOTES:\r\n"
375 " 1. When neither 'handle' nor 'prot_id' is specified, a list of all the\r\n"
376 " device handles in the UEFI environment is displayed. \r\n"
377 " 2. The '-d' option displays UEFI Driver Model related information including\r\n"
378 " parent handles, child handles, all drivers installed on the handle, etc.\r\n"
379 " 3. The '-v' option displays verbose information for the specified handle\r\n"
380 " including all the protocols on the handle and their details.\r\n"
381 " 4. If the '-p' option is specified, all handles containing the specified\r\n"
382 " protocol will be displayed. Otherwise, the 'handle' parameter has to be\r\n"
383 " specified for display. In this case, the '-d' option will be enabled\r\n"
384 " automatically if the '-v' option is not specified.\r\n"
385 ".SH EXAMPLES\r\n"
386 " \r\n"
387 "EXAMPLES:\r\n"
388 " * To display all handles and display one screen at a time:\r\n"
389 " Shell> dh -b\r\n"
390 " \r\n"
391 " * To display the detailed information on handle 0x30:\r\n"
392 " Shell> dh 30\r\n"
393 " \r\n"
394 " * To display all handles with 'diskio' protocol:\r\n"
395 " Shell> dh -p diskio\r\n"
396 " \r\n"
397 " * To display all handles with 'Image' protocol and break when the screen is\r\n"
398 " full:\r\n"
399 " Shell> dh -p Image -b\r\n"
400 ".SH RETURNVALUES\r\n"
401 " \r\n"
402 "RETURN VALUES:\r\n"
403 " SHELL_SUCCESS The action was completed as requested.\r\n"
404 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
405 " violation.\r\n"
406 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
407 " formatted or its value was out of bounds.\r\n"
410 ".TH devtree 0 "display device tree"\r\n"
411 ".SH NAME\r\n"
412 "Displays the UEFI Driver Model compliant device tree.\r\n"
413 ".SH SYNOPSIS\r\n"
414 " \r\n"
415 "DEVTREE [-b] [-d] [-l XXX] [DeviceHandle] \r\n"
416 ".SH OPTIONS\r\n"
417 " \r\n"
418 " -b - Displays one screen at a time.\r\n"
419 " -d - Displays the device tree using device paths.\r\n"
420 " -l - Displays the device tree using the specified language.\r\n"
421 " DeviceHandle - Displays the device tree below a certain handle.\r\n"
422 ".SH DESCRIPTION\r\n"
423 " \r\n"
424 "NOTES:\r\n"
425 " 1. This command prints a tree of devices that are being managed by drivers\r\n"
426 " that follow the UEFI Driver Model. By default, the devices are printed in\r\n"
427 " device names that are retrieved from the Component Name Protocol.\r\n"
428 " 2. If the option -d is specified, the device paths will be printed instead.\r\n"
429 ".SH EXAMPLES\r\n"
430 " \r\n"
431 "EXAMPLES:\r\n"
432 " * To display the tree of all devices compliant with the UEFI Driver Model:\r\n"
433 " Shell> devtree\r\n"
434 " \r\n"
435 " * To display the tree of all devices below device 28 compliant with the UEFI\r\n"
436 " Driver Model:\r\n"
437 " Shell> devtree 28\r\n"
438 " \r\n"
439 " * To display the tree of all devices compliant with the UEFI Driver Model\r\n"
440 " one screen at a time:\r\n"
441 " Shell> devtree -b\r\n"
442 " \r\n"
445 ".TH devices 0 "display a list of devices"\r\n"
446 ".SH NAME\r\n"
447 "Displays the list of devices managed by UEFI drivers. \r\n"
448 ".SH SYNOPSIS\r\n"
449 " \r\n"
450 "DEVICES [-b] [-l XXX] [-sfo] \r\n"
451 ".SH OPTIONS\r\n"
452 " \r\n"
453 " -b - Display one screen at a time\r\n"
454 " -l XXX - Display devices using the specified ISO 639-2 language\r\n"
455 " -sfo - Displays information as described in Standard-Format Output.\r\n"
456 ".SH DESCRIPTION\r\n"
457 " \r\n"
458 "NOTES:\r\n"
459 " 1. The command prints a list of devices that are being managed by drivers\r\n"
460 " that follow the UEFI Driver Model.\r\n"
461 " 2. Display Format:\r\n"
462 " CTRL - The handle number of the UEFI device\r\n"
463 " TYPE - The device type:\r\n"
464 " [R] - Root Controller\r\n"
465 " [B] - Bus Controller\r\n"
466 " [D] - Device Controller\r\n"
467 " CFG - A managing driver supports the Driver Configuration\r\n"
468 " Protocol. Yes if 'Y' or 'X'; No if 'N' or '-'.\r\n"
469 " DIAG - A managing driver supports the Driver Diagnostics\r\n"
470 " Protocol. Yes if 'Y' or 'X'; No if 'N' or '-'.\r\n"
471 " #P - The number of parent controllers for this device\r\n"
472 " #D - The number of drivers managing the device\r\n"
473 " #C - The number of child controllers produced by this device\r\n"
474 " DEVICE NAME - The name of the device from the Component Name Protocol\r\n"
475 ".SH EXAMPLES\r\n"
476 " \r\n"
477 "EXAMPLES:\r\n"
478 " * To display all devices compliant with the UEFI Driver Model:\r\n"
479 " Shell> devices\r\n"
480 " \r\n"
483 ".TH connect 0 "connect a driver"\r\n"
484 ".SH NAME\r\n"
485 "Binds a driver to a specific device and starts the driver. \r\n"
486 ".SH SYNOPSIS\r\n"
487 " \r\n"
488 "CONNECT [[DeviceHandle] [DriverHandle] | [-c] | [-r]] \r\n"
489 ".SH OPTIONS\r\n"
490 " \r\n"
491 " -c - Connects console devices\r\n"
492 " -r - Connects recursively\r\n"
493 " DeviceHandle - Specifies a device handle in hexadecimal format.\r\n"
494 " DriverHandle - Specifies a driver handle in hexadecimal format.\r\n"
495 ".SH DESCRIPTION\r\n"
496 " \r\n"
497 "NOTES:\r\n"
498 " 1. If no 'DeviceHandle' parameter is specified, all device handles in the\r\n"
499 " current system will be the default.\r\n"
500 " 2. If no 'DriverHandle' parameter is specified, all matched drivers will be\r\n"
501 " bound to the specified device.\r\n"
502 " 3. If 'DriverHandle' parameter is provided, the specified driver will have\r\n"
503 " highest priority on connecting the device(s).\r\n"
504 " 4. If the '-c' option is specified, only console devices described in the\r\n"
505 " UEFI Shell environment variables and related devices will be connected.\r\n"
506 " 5. If the '-r' option is specified, the command will recursively scan all\r\n"
507 " handles and check to see if any loaded or embedded driver can match the\r\n"
508 " specified device. If so, the driver will be bound to the device.\r\n"
509 " Additionally, if more device handles are created during the binding, \r\n"
510 " these handles will also be checked to see if a matching driver can bind\r\n"
511 " to these devices as well. The process is repeated until no more drivers\r\n"
512 " are able to connect to any devices. However, without the option, the\r\n"
513 " newly created device handles will not be further bound to any\r\n"
514 " drivers.\r\n"
515 " 6. If only a single handle is specified and the handle has an\r\n"
516 " EFI_DRIVER_BINDING_PROTOCOL on it, then the handle is assumed to be a\r\n"
517 " driver handle. Otherwise, it is assumed to be a device handle.\r\n"
518 " 7. If no parameters are specified, then the command will attempt to bind\r\n"
519 " all proper drivers to all devices without recursion. Each connection\r\n"
520 " status will be displayed.\r\n"
521 " 8. Output redirection is not supported for 'connect -r' usage.\r\n"
522 ".SH EXAMPLES\r\n"
523 " \r\n"
524 "EXAMPLES:\r\n"
525 " * To connect all drivers to all devices recursively:\r\n"
526 " Shell> connect -r\r\n"
527 " \r\n"
528 " * To display all connections:\r\n"
529 " Shell> connect\r\n"
530 " \r\n"
531 " * To connect drivers with 0x17 as highest priority to all the devices they\r\n"
532 " can manage:\r\n"
533 " Shell> connect 17\r\n"
534 " \r\n"
535 " * To connect all possible drivers to device 0x19:\r\n"
536 " Shell> connect 19\r\n"
537 " \r\n"
538 " * To connect drivers with 0x17 as highest priority to device 0x19 they can\r\n"
539 " manage:\r\n"
540 " Shell> connect 19 17\r\n"
541 " \r\n"
542 " * To connect console devices described in the UEFI Shell environment\r\n"
543 " variables:\r\n"
544 " Shell> connect -c\r\n"
545 ".SH RETURNVALUES\r\n"
546 " \r\n"
547 "RETURN VALUES:\r\n"
548 " SHELL_SUCCESS The action was completed as requested.\r\n"
549 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
550 " violation.\r\n"
551 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
552 " formatted or its value was out of bounds.\r\n"
555 ".TH openinfo 0 "display info about a handle."\r\n"
556 ".SH NAME\r\n"
557 "Displays the protocols and agents associated with a handle. \r\n"
558 ".SH SYNOPSIS\r\n"
559 " \r\n"
560 "OPENINFO Handle [-b] \r\n"
561 ".SH OPTIONS\r\n"
562 " \r\n"
563 " -b - Displays one screen at a time.\r\n"
564 " Handle - Displays open protocol information for the specified handle.\r\n"
565 ".SH DESCRIPTION\r\n"
566 " \r\n"
567 "NOTES:\r\n"
568 " 1. This command is used to display the open protocols on a given handle.\r\n"
569 ".SH EXAMPLES\r\n"
570 " \r\n"
571 "EXAMPLES:\r\n"
572 " * To show open protocols on handle 0x23:\r\n"
573 " Shell> openinfo 23\r\n"
574 " \r\n"
577 ".TH drvdiag 0 "diagnose a driver"\r\n"
578 ".SH NAME\r\n"
579 "Invokes the Driver Diagnostics Protocol. \r\n"
580 ".SH SYNOPSIS\r\n"
581 " \r\n"
582 "DRVDIAG [-c] [-l XXX] [-s|-e|-m] [DriverHandle [DeviceHandle [ChildHandle]]] \r\n"
583 ".SH OPTIONS\r\n"
584 " \r\n"
585 " -c - Diagnoses all child devices.\r\n"
586 " -l - Diagnoses using the ISO 639-2 language specified by XXX.\r\n"
587 " -s - Runs diagnostics in standard mode.\r\n"
588 " -e - Runs diagnostics in extended mode.\r\n"
589 " -m - Runs diagnostics in manufacturing mode.\r\n"
590 " DriverHandle - Specifies the handle of the driver to diagnose.\r\n"
591 " DeviceHandle - Specifies the handle of a device that DriverHandle is managing.\r\n"
592 " ChildHandle - Specifies the handle of a device that is a child of DeviceHandle.\r\n"
593 ".SH DESCRIPTION\r\n"
594 " \r\n"
595 "NOTES:\r\n"
596 " 1. This command invokes the Driver Diagnostics Protocol.\r\n"
597 ".SH EXAMPLES\r\n"
598 " \r\n"
599 "EXAMPLES:\r\n"
600 " * To display the list of devices that are available for diagnostics:\r\n"
601 " Shell> drvdiag\r\n"
602 " \r\n"
603 " * To display the list of devices and child devices that are available for\r\n"
604 " diagnostics:\r\n"
605 " Shell> drvdiag -c\r\n"
606 " \r\n"
607 " * To run diagnostics in standard mode on all devices:\r\n"
608 " Shell> drvdiag -s\r\n"
609 " \r\n"
610 " * To run diagnostics in standard mode on all devices in English:\r\n"
611 " Shell> drvdiag -s -l eng\r\n"
612 " \r\n"
613 " * To run diagnostics in standard mode on all devices in Spanish:\r\n"
614 " Shell> drvdiag -s -l spa\r\n"
615 " \r\n"
616 " * To run diagnostics in standard mode on all devices and child devices:\r\n"
617 " Shell> drvdiag -s -c\r\n"
618 " \r\n"
619 " * To run diagnostics in extended mode on all devices:\r\n"
620 " Shell> drvdiag -e\r\n"
621 " \r\n"
622 " * To run diagnostics in manufacturing mode on all devices:\r\n"
623 " Shell> drvdiag -m\r\n"
624 " \r\n"
625 " * To run diagnostics in standard mode on all devices managed by driver 0x17:\r\n"
626 " Shell> drvdiag -s 17\r\n"
627 " \r\n"
628 " * To run diagnostics in standard mode on device 0x28 managed by driver 0x17:\r\n"
629 " Shell> drvdiag -s 17 28\r\n"
630 " \r\n"
631 " * To run diagnostics in standard mode on all child devices of device 0x28\r\n"
632 " managed by driver 0x17:\r\n"
633 " Shell> drvdiag -s 17 28 -c\r\n"
634 " \r\n"
635 " * To run diagnostics in standard mode on child device 0x30 of device 0x28\r\n"
636 " managed by driver 0x17:\r\n"
637 " Shell> drvdiag -s 17 28 30\r\n"
638 ".SH RETURNVALUES\r\n"
639 " \r\n"
640 "RETURN VALUES:\r\n"
641 " SHELL_SUCCESS The action was completed as requested.\r\n"
642 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
643 " violation.\r\n"
644 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
645 " formatted or its value was out of bounds.\r\n"
648 ".TH reconnect 0 "reconnect drivers"\r\n"
649 ".SH NAME\r\n"
650 "Reconnects drivers to the specific device. \r\n"
651 ".SH SYNOPSIS\r\n"
652 " \r\n"
653 "RECONNECT DeviceHandle [DriverHandle [ChildHandle]]\r\n"
654 "RECONNECT -r \r\n"
655 ".SH OPTIONS\r\n"
656 " \r\n"
657 " -r - Reconnects drivers to all devices.\r\n"
658 " DeviceHandle - Specifies a device handle (a hexadecimal number).\r\n"
659 " DriverHandle - Specifies a driver handle (a hexadecimal number). If not specified, all\r\n"
660 " drivers on the specified device will be reconnected. \r\n"
661 " ChildHandle - Specifies the child handle of device (a hexadecimal number). If not\r\n"
662 " specified, then all child handles of the specified device are\r\n"
663 " reconnected.\r\n"
664 ".SH DESCRIPTION\r\n"
665 " \r\n"
666 "NOTES:\r\n"
667 " 1. This command reconnects drivers to the specific device. It will first\r\n"
668 " disconnect the specified driver from the specified device and then connect\r\n"
669 " the driver to the device recursively.\r\n"
670 " 2. If the -r option is used, then all drivers will be reconnected to all\r\n"
671 " devices. Any drivers that are bound to any devices will be disconnected\r\n"
672 " first and then connected recursively.\r\n"
673 " 3. See the connect and disconnect commands for more details. \r\n"
674 ".SH EXAMPLES\r\n"
675 " \r\n"
676 "EXAMPLES:\r\n"
677 " * To reconnect all drivers to all devices:\r\n"
678 " Shell> reconnect -r\r\n"
679 " \r\n"
680 " * To reconnect all drivers to device 0x28:\r\n"
681 " fs0:\> reconnect 28\r\n"
682 " \r\n"
683 " * To disconnect 0x17 from 0x28 then reconnect drivers with 0x17 as highest\r\n"
684 " priority to device 0x28:\r\n"
685 " fs0:\> reconnect 28 17\r\n"
686 " \r\n"
687 " * To disconnect 0x17 from 0x28 destroying child 0x32 then reconnect drivers\r\n"
688 " with 0x17 as highest priority to device 0x28\r\n"
689 " fs0:\> reconnect 28 17 32\r\n"
690 ".SH RETURNVALUES\r\n"
691 " \r\n"
692 "RETURN VALUES:\r\n"
693 " SHELL_SUCCESS The action was completed as requested.\r\n"
694 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
695 " violation.\r\n"
696 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
697 " formatted or its value was out of bounds.\r\n"
700 ".TH unload 0 "unload a driver"\r\n"
701 ".SH NAME\r\n"
702 "Unloads a driver image that was already loaded. \r\n"
703 ".SH SYNOPSIS\r\n"
704 " \r\n"
705 "UNLOAD [-n] [-v|-verbose] Handle \r\n"
706 ".SH OPTIONS\r\n"
707 " \r\n"
708 " -n - Skips all prompts during unloading, so that it can be used\r\n"
709 " in a script file.\r\n"
710 " -v, -verbose - Dumps verbose status information before the image is unloaded.\r\n"
711 " Handle - Specifies the handle of driver to unload, always taken as hexadecimal number.\r\n"
712 ".SH DESCRIPTION\r\n"
713 " \r\n"
714 "NOTES:\r\n"
715 " 1. The '-n' option can be used to skip all prompts during unloading.\r\n"
716 " 2. If the '-v' option is specified, verbose image information will be\r\n"
717 " displayed before the image is unloaded.\r\n"
718 " 3. Only drivers that support unloading can be successfully unloaded.\r\n"
719 " 4. Use the 'LOAD' command to load a driver.\r\n"
720 ".SH EXAMPLES\r\n"
721 " \r\n"
722 "EXAMPLES:\r\n"
723 " * To find the handle for the UEFI driver image to unload:\r\n"
724 " Shell> dh -b\r\n"
725 " \r\n"
726 " * To unload the UEFI driver image with handle 27:\r\n"
727 " Shell> unload 27\r\n"
728 ".SH RETURNVALUES\r\n"
729 " \r\n"
730 "RETURN VALUES:\r\n"
731 " SHELL_SUCCESS The action was completed as requested.\r\n"
732 " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n"
733 " violation.\r\n"
734 " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n"
735 " formatted or its value was out of bounds.\r\n"