Lines Matching refs:fsp

8 arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
14 - fsp,enable-sdio
15 - fsp,enable-sdcard
16 - fsp,enable-hsuart0
17 - fsp,enable-hsuart1
18 - fsp,enable-spi
19 - fsp,enable-sata
20 - fsp,enable-azalia
21 - fsp,enable-xhci
22 - fsp,enable-dma0
23 - fsp,enable-dma1
24 - fsp,enable-i2-c0
25 - fsp,enable-i2-c1
26 - fsp,enable-i2-c2
27 - fsp,enable-i2-c3
28 - fsp,enable-i2-c4
29 - fsp,enable-i2-c5
30 - fsp,enable-i2-c6
31 - fsp,enable-pwm0
32 - fsp,enable-pwm1
33 - fsp,enable-hsi
34 - fsp,mrc-debug-msg
35 - fsp,isp-enable
36 - fsp,igd-render-standby
37 - fsp,txe-uma-enable
38 - fsp,emmc45-ddr50-enabled
39 - fsp,emmc45-hs200-enabled
40 - fsp,enable-igd
41 - fsp,enable-memory-down
43 If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
44 "fsp,memory-down-params{};" to specify how your memory is configured.  If you
45 do not set "fsp,enable-memory-down", then the DIMM SPD information will be
51 - fsp,mrc-init-tseg-size
52 - fsp,mrc-init-mmio-size
53 - fsp,mrc-init-spd-addr1
54 - fsp,mrc-init-spd-addr2
55 - fsp,emmc-boot-mode
56 - fsp,sata-mode
57 - fsp,lpe-mode
58 - fsp,lpss-sio-mode
59 - fsp,igd-dvmt50-pre-alloc
60 - fsp,aperture-size
61 - fsp,gtt-size
62 - fsp,scc-mode
63 - fsp,os-selection
64 - fsp,emmc45-retune-timer-value
66 - fsp,memory-down-params {
70 	- fsp,dimm-0-enable
71 	- fsp,dimm-1-enable
75 	- fsp,dram-speed
76 	- fsp,dram-type
77 	- fsp,dimm-width
78 	- fsp,dimm-density
79 	- fsp,dimm-bus-width
80 	- fsp,dimm-sides
81 	- fsp,dimm-tcl
82 	- fsp,dimm-trpt-rcd
83 	- fsp,dimm-twr
84 	- fsp,dimm-twtr
85 	- fsp,dimm-trrd
86 	- fsp,dimm-trtp
87 	- fsp,dimm-tfaw
91 arch/x86/include/asm/arch-baytrail/fsp directory (eg: MRC_INIT_TSEG_SIZE_1MB).
100 	fsp {
101 		compatible = "intel,baytrail-fsp";
102 		fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
103 		fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
104 		fsp,mrc-init-spd-addr1 = <0xa0>;
105 		fsp,mrc-init-spd-addr2 = <0xa2>;
106 		fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
107 		fsp,enable-sdio;
108 		fsp,enable-sdcard;
109 		fsp,enable-hsuart1;
110 		fsp,enable-spi;
111 		fsp,enable-sata;
112 		fsp,sata-mode = <SATA_MODE_AHCI>;
113 		fsp,lpe-mode = <LPE_MODE_PCI>;
114 		fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
115 		fsp,enable-dma0;
116 		fsp,enable-dma1;
117 		fsp,enable-i2c0;
118 		fsp,enable-i2c1;
119 		fsp,enable-i2c2;
120 		fsp,enable-i2c3;
121 		fsp,enable-i2c4;
122 		fsp,enable-i2c5;
123 		fsp,enable-i2c6;
124 		fsp,enable-pwm0;
125 		fsp,enable-pwm1;
126 		fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
127 		fsp,aperture-size = <APERTURE_SIZE_256MB>;
128 		fsp,gtt-size = <GTT_SIZE_2MB>;
129 		fsp,scc-mode = <SCC_MODE_PCI>;
130 		fsp,os-selection = <OS_SELECTION_LINUX>;
131 		fsp,emmc45-ddr50-enabled;
132 		fsp,emmc45-retune-timer-value = <8>;
133 		fsp,enable-igd;
134 		fsp,enable-memory-down;
135 		fsp,memory-down-params {
136 			compatible = "intel,baytrail-fsp-mdp";
137 			fsp,dram-speed = <DRAM_SPEED_1066MTS>;
138 			fsp,dram-type = <DRAM_TYPE_DDR3L>;
139 			fsp,dimm-0-enable;
140 			fsp,dimm-width = <DIMM_WIDTH_X16>;
141 			fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
142 			fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
143 			fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
144 			fsp,dimm-tcl = <0xb>;
145 			fsp,dimm-trpt-rcd = <0xb>;
146 			fsp,dimm-twr = <0xc>;
147 			fsp,dimm-twtr = <6>;
148 			fsp,dimm-trrd = <6>;
149 			fsp,dimm-trtp = <6>;
150 			fsp,dimm-tfaw = <0x14>;