Lines Matching refs:NFC

67 Following parameter can be used to enable support for NFC config method:
296 WPS with NFC
299 WPS can be used with NFC-based configuration method. An NFC tag
301 authenticate the connection instead of the PIN. In addition, an NFC tag
305 When the AP acts as an Enrollee, a local NFC tag with a password token
306 can be used by touching the NFC interface of an external Registrar. The
307 wps_nfc_token command is used to manage use of the NFC password token
308 from the AP. "wps_nfc_token enable" enables the use of the AP's NFC
310 the NFC password token.
312 The NFC password token that is either pre-configured in the
316 wpa_supplicant can be used to generate NFC password tokens during
320 NFC configuration token. The output value from this command is a hexdump
323 encapsulation to be included). This data needs to be written to an NFC
324 tag with an external program. Once written, the NFC configuration token
325 can be used to touch an NFC interface on a station to provision the
328 When the NFC device on the AP reads an NFC tag with a MIME media type
335 If the NFC tag contains a password token, the token is added to the
348 <carrier from handover select>" is used to report completed NFC