Lines Matching refs:NFC

69 Following parameter can be used to enable support for NFC config method:
317 WPS with NFC
320 WPS can be used with NFC-based configuration method. An NFC tag
322 authenticate the connection instead of the PIN. In addition, an NFC tag
326 When the station acts as an Enrollee, a local NFC tag with a password
327 token can be used by touching the NFC interface of a Registrar.
330 the Enrollee using the NFC password token that is either pre-configured
334 (build with "make nfc_pw_token") can be used to generate NFC password
339 NFC configuration token when wpa_supplicant is controlling an AP
343 encapsulation to be included). This data needs to be written to an NFC
344 tag with an external program. Once written, the NFC configuration token
345 can be used to touch an NFC interface on a station to provision the
349 to build an NFC configuration token based on a locally configured
352 If the station includes NFC interface and reads an NFC tag with a MIME
359 If the NFC tag contains a configuration token, the network is added to
360 wpa_supplicant configuration. If the NFC tag contains a password token,
362 then be used with wps_reg command (when the NFC password token was from
364 the ER functionality has been started (wps_er_start), the NFC password
366 of the NFC password token).
386 reporting completed NFC connection handover. The first parameter
392 used to build an NFC configuration token for the specified AP when
397 to be written to an NFC tag with an external program. Once written, the
398 NFC configuration token can be used to touch an NFC interface on a