Lines Matching refs:is

11  * distributed under the License is distributed on an "AS IS" BASIS,
23  * This interface is used by telephony & telecom to talk to cellular radio.
44      * Response function is IRadioResponse.getIccCardStatusResponse()
56      * Response function is IRadioResponse.supplyIccPinForAppResponse()
69      * Response function is IRadioResponse.supplyIccPukForAppResponse()
82      * Response function is IRadioResponse.supplyIccPin2ForAppResponse()
95      * Response function is IRadioResponse.supplyIccPuk2ForAppResponse()
109      * Response function is IRadioResponse.changeIccPinForAppResponse()
123      * Response function is IRadioResponse.changeIccPin2ForAppResponse()
135      * Response function is IRadioResponse.supplyNetworkDepersonalizationResponse()
145      * Response function is IRadioResponse.getCurrentCallsResponse()
152      * This method is never used for supplementary service codes
157      * Response function is IRadioResponse.dialResponse()
164      * Only valid when radio state is "RADIO_STATE_ON"
169      * Response function is IRadioResponse.getImsiForAppResponse()
176      * After this HANGUP request returns, Radio must show the connection is NOT
182      * Response function is IRadioResponse.hangupResponse()
189      * After this HANGUP request returns, Radio must show the connection is NOT
194      * Response function is IRadioResponse.hangupWaitingOrBackgroundResponse()
201      * After this HANGUP request returns, Radio must show the connection is NOT
206      * Response function is IRadioResponse.hangupForegroundResumeBackgroundResponse()
227      * Response function is IRadioResponse.switchWaitingOrHoldingAndActiveResponse()
237      * Response function is IRadioResponse.conferenceResponse()
248      * Response function is IRadioResponse.rejectCallResponse()
258      * Response function is IRadioResponse.getLastCallFailCauseResponse()
265      * Must succeed if radio is on.
269      * Response function is IRadioResponse.getSignalStrengthResponse()
278      * Response function is IRadioResponse.getVoiceRegistrationStateResponse()
287      * Response function is IRadioResponse.getDataRegistrationStateResponse()
296      * Response function is IRadioResponse.getOperatorResponse()
302      * If the radio is turned off/on the radio modem subsystem
303      * is expected return to an initialized state. For instance,
310      * Response function is IRadioResponse.setRadioPowerResponse()
317      * If the implementation is currently playing a tone requested via
324      * Response function is IRadioResponse.sendDtmfResponse()
334      * Response function is IRadioResponse.sendSmsResponse()
337      * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
338      * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
350      * Response function is IRadioResponse.sendSMSExpectMoreResponse()
353      * fails. RadioError:SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
354      * and RadioError:GENERIC_FAILURE means no retry (i.e. error cause is 500)
360      * return DataCallFailCause:NONE it is added to the list of data calls and a
361      * unsolDataCallListChanged() is sent. The call remains in the
362      * list until deactivateDataCall() is issued or the
363      * radio is powered off/on. This list is returned by getDataCallList()
366      * The Radio is expected to:
370      *  - The interface is configured with one or more addresses and
371      *    is capable of sending and receiving packets. The prefix length
382      * @param roamingAllowed Indicating data roaming is allowed or not by the user.
383      * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
385      *                  Note this is for backward compatibility with the old radio modem. The modem
388      * Response function is IRadioResponse.setupDataCallResponse()
396      * This is similar to the TS 27.007 "restricted SIM" operation
410      * Response function is IRadioResponse.iccIOForAppResponse()
422      * Only one USSD session must exist at a time, and the session is assumed
431      * Response function is IRadioResponse.sendUssdResponse()
442      * Response function is IRadioResponse.cancelPendingUssdResponse()
451      * Response function is IRadioResponse.getClirResponse()
461      * Response function is IRadioResponse.setClirResponse()
471      * Response function is IRadioResponse.getCallForwardStatusResponse()
482      * Response function is IRadioResponse.setCallForwardResponse()
490      * @param serviceClass Service class is the TS 27.007 service class to query
492      * Response function is IRadioResponse.getCallWaitingResponse()
500      * @param enable is false for "disabled" and true for "enabled"
501      * @param serviceClass is the TS 27.007 service class bit vector of services to modify
503      * Response function is IRadioResponse.setCallWaitingResponse()
513      * @param success is true on successful receipt
514      *        (basically, AT+CNMA=1 from TS 27.005 is 0 on failed receipt
516      * @param cause: if success is false, this contains the failure cause as defined
519      * Response function is IRadioResponse.acknowledgeLastIncomingGsmSmsResponse()
532      * Response function is IRadioResponse.acceptCallResponse()
538      * data call list if RadioError:NONE is returned. Any other return
549      * Response function is IRadioResponse.deactivateDataCallResponse()
558      * @param facility is the facility string code from TS 27.007 7.4
560      * @param password is the password, or "" if not required
561      * @param serviceClass is the TS 27.007 service class bit vector of services to query
562      * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
563      *        This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
565      * Response function is IRadioResponse.getFacilityLockForAppResponse()
574      * @param facility is the facility string code from TS 27.007 7.4 (eg "AO" for BAOC)
576      * @param password is the password
577      * @param serviceClass is string representation of decimal TS 27.007
580      * @param appId is AID value, See ETSI 102.221 8.1 and 101.220 4, empty string if no value.
581      *        This is only applicable in the case of Fixed Dialing Numbers (FDN) requests.
583      * Response function is IRadioResponse.setFacilityLockForAppResponse()
596      * Response function is IRadioResponse.setBarringPasswordResponse()
606      * Response function is IRadioResponse.getNetworkSelectionModeResponse()
612      * This request must not respond until the new operator is selected and registered.
616      * Response function is IRadioResponse.setNetworkSelectionModeAutomaticResponse()
622      * This request must not respond until the new operator is selected and registered.
627      * Response function is IRadioResponse.setNetworkSelectionModeManualResponse()
636      * Response function is IRadioResponse.getAvailableNetworksResponse()
642      * stopDtmf is received.
643      * If a startDtmf() is received while a tone is currently playing,
649      * Response function is IRadioResponse.startDtmfResponse()
658      * Response function is IRadioResponse.stopDtmfResponse()
667      * Response function is IRadioResponse.getBasebandVersionResponse()
685      * Response function is IRadioResponse.separateConnectionResponse()
691      * Must only be sent while voice call is active.
692      * Must always be reset to "disable mute" when a new voice call is initiated
697      * Response function is IRadioResponse.setMuteResponse()
706      * Response function is IRadioResponse.getMuteResponse()
716      * Response function is IRadioResponse.getClipResponse()
721      * Returns the data call list. An entry is added when a
722      * setupDataCall() is issued and removed on a
723      * deactivateDataCall(). The list is emptied when
724      * setRadioPower() off/on is issued.
728      * Response function is IRadioResponse.getDataCallListResponse()
739      * Response function is IRadioResponse.setSuppServiceNotificationsResponse()
749      * Response function is IRadioResponse.writeSmsToSimResponse()
759      * Response function is IRadioResponse.deleteSmsOnSimResponse()
769      * Response function is IRadioResponse.setBandModeResponse()
778      * Response function is IRadioResponse.getAvailableBandModesResponse()
789      * Response function is IRadioResponse.sendEnvelopeResponse()
800      * Response function is IRadioResponse.sendTerminalResponseResponseToSim()
813      * Response callback is IRadioResponse.handleStkCallSetupRequestFromSimResponse()
823      * Response callback is IRadioResponse.explicitCallTransferResponse()
834      * Response callback is IRadioResponse.setPreferredNetworkTypeResponse()
845      * Response callback is IRadioResponse.getPreferredNetworkTypeResponse()
854      * Response callback is IRadioResponse.getNeighboringCidsResponse()
863      * when the screen is on and "updates disabled" when the screen is off.
868      * Response callback is IRadioResponse.setLocationUpdatesResponse()
879      * Response callback is IRadioResponse.setCdmaSubscriptionSourceResponse()
890      * Response callback is IRadioResponse.setCdmaRoamingPreferenceResponse()
900      * Response callback is IRadioResponse.getCdmaRoamingPreferenceResponse()
910      * Response callback is IRadioResponse.setTTYModeResponse()
919      * Response callback is IRadioResponse.getTTYModeResponse()
930      * Response callback is IRadioResponse.setPreferredVoicePrivacyResponse()
939      * Response callback is IRadioResponse.getPreferredVoicePrivacyResponse()
949      * Response callback is IRadioResponse.sendCDMAFeatureCodeResponse()
959      * @param off is the DTMF OFF length in milliseconds, or 0 to use default
961      * Response callback is IRadioResponse.sendBurstDtmfResponse()
971      * Response callback is IRadioResponse.sendCdmaSmsResponse()
982      * Response callback is IRadioResponse.acknowledgeLastIncomingCdmaSmsResponse()
991      * Response callback is IRadioResponse.getGsmBroadcastConfigResponse()
1001      * Response callback is IRadioResponse.setGsmBroadcastConfigResponse()
1012      * Response callback is IRadioResponse.setGsmBroadcastActivationResponse()
1021      * Response callback is IRadioResponse.getCdmaBroadcastConfigResponse()
1031      * Response callback is IRadioResponse.setCdmaBroadcastConfigResponse()
1042      * Response callback is IRadioResponse.setCdmaBroadcastActivationResponse()
1048      * The request is only allowed when CDMA subscription is available. When CDMA
1049      * subscription is changed, application layer must re-issue the request to
1054      * Response callback is IRadioResponse.getCDMASubscriptionResponse()
1064      * Response callback is IRadioResponse.writeSmsToRuimResponse()
1074      * Response callback is IRadioResponse.deleteSmsOnRuimResponse()
1080      * The request is always allowed and contains GSM and CDMA device identity.
1081      * When CDMA subscription is changed the ESN/MEID changes. The application
1086      * Response callback is IRadioResponse.getDeviceIdentityResponse()
1097      * Response callback is IRadioResponse.exitEmergencyCallbackModeResponse()
1106      * Response callback is IRadioResponse.getSmscAddressResponse()
1116      * Response callback is IRadioResponse.setSmscAddressResponse()
1121      * Indicates whether there is storage available for new SMS messages.
1124      * @param available true if memory is available for storing new messages,
1125      *        false if memory capacity is exceeded
1127      * Response callback is IRadioResponse.reportSmsMemoryStatusResponse()
1132      * Indicates that the StkService is running and is
1137      * Response callback is IRadioResponse.reportStkServiceIsRunningResponse()
1146      * Response callback is IRadioResponse.getCdmaSubscriptionSourceResponse()
1157      * Response callback is IRadioResponse.requestIsimAuthenticationResponse()
1171      * Response callback is IRadioResponse.acknowledgeIncomingGsmSmsWithPduResponse()
1190      * Response callback is IRadioResponse.sendEnvelopeWithStatusResponse()
1195      * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
1196      * when radio state is not RADIO_STATE_UNAVAILABLE
1200      * Response callback is IRadioResponse.getVoiceRadioTechnologyResponse()
1212      * Response callback is IRadioResponse.getCellInfoListResponse()
1225      * Response callback is IRadioResponse.setCellInfoListRateResponse()
1236      * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
1238      *                  condition. Note this is for backward compatibility with the old radio modem.
1241      * Response callback is IRadioResponse.setInitialAttachApnResponse()
1251      * Response callback is IRadioResponse.getImsRegistrationStateResponse()
1259      * In case of retry, data is encoded based on Voice Technology available.
1264      * Response callback is IRadioResponse.sendImsSmsResponse()
1278      * Response callback is IRadioResponse.iccTransmitApduBasicChannelResponse()
1290      * Response callback is IRadioResponse.iccOpenLogicalChannelResponse()
1301      * Response callback is IRadioResponse.iccCloseLogicalChannelResponse()
1314      * Response callback is IRadioResponse.iccTransmitApduLogicalChannelResponse()
1320      * This is used for device configuration by some CDMA operators.
1323      * @param itemId NvItem is radio NV item as defined in types.hal
1325      * Response callback is IRadioResponse.nvReadItemResponse()
1331      * This is used for device configuration by some CDMA operators.
1336      * Response callback is IRadioResponse.nvWriteItemResponse()
1342      * This is used for device configuration by some CDMA operators.
1347      * Response callback is IRadioResponse.nvWriteCdmaPrlResponse()
1353      * This is used for device configuration by some CDMA operators.
1358      * Response callback is IRadioResponse.nvResetConfigResponse()
1368      * Response callback is IRadioResponse.setUiccSubscriptionResponse()
1378      * Response callback is IRadioResponse.setDataAllowedResponse()
1387      * Response callback is IRadioResponse.getHardwareConfigResponse()
1400      * Response callback is IRadioResponse.requestIccSimAuthenticationResponse()
1411      * @param isRoaming Indicating the device is roaming or not. The 'protocol' parameter in the old
1413      *                  roaming condition. Note this is for backward compatibility with the old
1416      * Response callback is IRadioResponse.setDataProfileResponse()
1421      * Device is shutting down. All further commands are ignored
1426      * Response callback is IRadioResponse.requestShutdownResponse()
1435      * Response callback is IRadioResponse.getRadioCapabilityResponse()
1448      * Response callback is IRadioResponse.setRadioCapabilityResponse()
1459      * Response callback is IRadioResponse.startLceServiceResponse()
1469      * Response callback is IRadioResponse.stopLceServiceResponse()
1478      * Response callback is IRadioResponse.pullLceDataResponse()
1484      * Request clear-on-read statistics information that is used for
1490      * Response callback is IRadioResponse.getModemActivityInfoResponse()
1499      *  - Must allow all carriers. If a previously allowed SIM is present, modem must not reload
1500      *    the SIM. If a previously disallowed SIM is present, reload the SIM and notify Android.
1503      *    is in the allowed list, modem must not reload the SIM. If a present SIM is *not* in
1514      * Response callback is IRadioResponse.setAllowedCarriersResponse()
1523      * Response callback is IRadioResponse.getAllowedCarriersResponse()
1529      * This is providing the device state information for the modem to perform power saving
1536      * Response callback is IRadioResponse.sendDeviceStateResponse()
1542      * This is used to prevent unnecessary application processor wake up for power saving purposes
1549      * Response callback is IRadioResponse.setIndicationFilterResponse()
1555      * Request is equivalent to inserting or removing the card.
1563      * Response callback is IRadioResponse.setSimCardPowerResponse()
1568      * When response type received from a radio indication or radio response is