Lines Matching refs:when

32      * start looking for an access point. This state is entered when a
50      * This state is entered when the supplicant starts scanning for a
55      * This state is entered when the supplicant has found a suitable BSS
62      * This state is entered when the supplicant has found a suitable BSS
65      * state is entered when the driver is configured to try to associate
70      * This state is entered when the driver reports that association has
77      * This state is entered when WPA/WPA2 4-Way Handshake is started. In
78      * case of WPA-PSK, this happens when receiving the first EAPOL-Key
80      * when the IEEE 802.1X/EAPOL authentication has been completed.
84      * This state is entered when 4-Way Key Handshake has been completed
85      * (i.e., when the supplicant sends out message 4/4) and when Group
86      * Key rekeying is started by the AP (i.e., when supplicant receives
91      * This state is entered when the full authentication process is
92      * completed. In case of WPA2, this happens when the 4-Way Handshake is
97      * plaintext connections, this state is entered when an association
488    * This is useful to figure out when the driver/firmware roams to a bssid