/** @file
Library that provides QNC specific library services in PEI phase

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef __INTEL_QNC_LIB_H__
#define __INTEL_QNC_LIB_H__

/**
  This function initializes the QNC register before MRC.
  It sets RCBA, PMBASE, disable Watchdog timer and initialize QNC GPIO.
  If the function cannot complete it'll ASSERT().
**/
VOID
EFIAPI
PeiQNCPreMemInit (
  VOID
  );


/**
  Used to check SCH if it's S3 state.  Clear the register state after query.

  @retval TRUE if it's S3 state.
  @retval FALSE if it's not S3 state.

**/
BOOLEAN
EFIAPI
QNCCheckS3AndClearState (
   VOID
  );

/**
  Used to check SCH if system wakes up from power on reset. Clear the register state after query.

  @retval TRUE  if system wakes up from power on reset
  @retval FALSE if system does not wake up from power on reset

**/
BOOLEAN
EFIAPI
QNCCheckPowerOnResetAndClearState (
   VOID
  );

/**
  This function is used to clear SMI and wake status.

**/
VOID
EFIAPI
QNCClearSmiAndWake (
  VOID
  );

/**
  Used to initialize the QNC register after MRC.

**/
VOID
EFIAPI
PeiQNCPostMemInit (
  VOID
  );

/** Send DRAM Ready opcode.

  @param[in]       OpcodeParam  Parameter to DRAM ready opcode.

  @retval          VOID
**/
VOID
EFIAPI
QNCSendOpcodeDramReady (
  IN UINT32   OpcodeParam
  );

/**

  Relocate RMU Main binary to memory after MRC to improve performance.

  @param[in]  DestBaseAddress  - Specify the new memory address for the RMU Main binary.
  @param[in]  SrcBaseAddress   - Specify the current memory address for the RMU Main binary.
  @param[in]  Size             - Specify size of the RMU Main binary.

  @retval     VOID

**/
VOID
EFIAPI
RmuMainRelocation (
  IN CONST UINT32   DestBaseAddress,
  IN CONST UINT32   SrcBaseAddress,
  IN CONST UINTN    Size
  );

/**
  Get the total memory size

**/
UINT32
EFIAPI
QNCGetTotalMemorysize (
  VOID
  );

/**
  Get the memory range of TSEG.
  The TSEG's memory is below TOLM.

  @param[out] BaseAddress The base address of TSEG's memory range
  @param[out] MemorySize  The size of TSEG's memory range

**/
VOID
EFIAPI
QNCGetTSEGMemoryRange (
  OUT UINT64  *BaseAddress,
  OUT UINT64  *MemorySize
  );

/**
  Updates the PAM registers in the MCH for the requested range and mode.

  @param   Start        The start address of the memory region
  @param   Length       The length, in bytes, of the memory region
  @param   ReadEnable   Pointer to the boolean variable on whether to enable read for legacy memory section.
                        If NULL, then read attribute will not be touched by this call.
  @param   ReadEnable   Pointer to the boolean variable on whether to enable write for legacy memory section.
                        If NULL, then write attribute will not be touched by this call.
  @param   Granularity  A pointer to granularity, in bytes, that the PAM registers support

  @retval  RETURN_SUCCESS            The PAM registers in the MCH were updated
  @retval  RETURN_INVALID_PARAMETER  The memory range is not valid in legacy region.

**/
RETURN_STATUS
EFIAPI
QNCLegacyRegionManipulation (
  IN  UINT32                  Start,
  IN  UINT32                  Length,
  IN  BOOLEAN                 *ReadEnable,
  IN  BOOLEAN                 *WriteEnable,
  OUT UINT32                  *Granularity
  );

/**
  Do early init of pci express rootports on Soc.

**/
VOID
EFIAPI
PciExpressEarlyInit (
  VOID
  );

/**
  Complete initialization of all the pci express rootports on Soc.
**/
EFI_STATUS
EFIAPI
PciExpressInit (
  );

/**
  Determine if QNC is supported.

  @retval FALSE  QNC is not supported.
  @retval TRUE   QNC is supported.
**/
BOOLEAN
EFIAPI
IsQncSupported (
  VOID
  );

/**
  Get the DeviceId of the SoC

  @retval PCI DeviceId of the SoC
**/
UINT16
EFIAPI
QncGetSocDeviceId (
  VOID
  );

/**
  Enable SMI detection of legacy flash access violations.
**/
VOID
EFIAPI
QncEnableLegacyFlashAccessViolationSmi (
  VOID
  );

/**
  Setup RMU Thermal sensor registers for Vref mode.
**/
VOID
EFIAPI
QNCThermalSensorSetVRefMode (
  VOID
  );

/**
  Setup RMU Thermal sensor registers for Ratiometric mode.
**/
VOID
EFIAPI
QNCThermalSensorSetRatiometricMode (
  VOID
  );

/**
  Setup RMU Thermal sensor trip point values.

  @param[in]  CatastrophicTripOnDegreesCelsius  - Catastrophic set trip point threshold.
  @param[in]  HotTripOnDegreesCelsius           - Hot set trip point threshold.
  @param[in]  HotTripOffDegreesCelsius          - Hot clear trip point threshold.

  @retval     VOID
**/
EFI_STATUS
EFIAPI
QNCThermalSensorSetTripValues (
  IN  CONST UINTN             CatastrophicTripOnDegreesCelsius,
  IN  CONST UINTN             HotTripOnDegreesCelsius,
  IN  CONST UINTN             HotTripOffDegreesCelsius
  );

/**
  Enable RMU Thermal sensor with a Catastrophic Trip point.

  @retval  EFI_SUCCESS            Trip points setup.
  @retval  EFI_INVALID_PARAMETER  Invalid trip point value.

**/
EFI_STATUS
EFIAPI
QNCThermalSensorEnableWithCatastrophicTrip (
  IN  CONST UINTN             CatastrophicTripOnDegreesCelsius
  );

/**
  Lock all RMU Thermal sensor control & trip point registers.

**/
VOID
EFIAPI
QNCThermalSensorLockAllRegisters (
  VOID
  );

/**
  Set chipset policy for double bit ECC error.

  @param[in]       PolicyValue  Policy to config on double bit ECC error.

**/
VOID
EFIAPI
QNCPolicyDblEccBitErr (
  IN  CONST UINT32                        PolicyValue
  );

/**
  Determine if running on secure Quark hardware Sku.

  @retval FALSE  Base Quark Sku or unprovisioned Secure Sku running.
  @retval TRUE   Provisioned SecureSku hardware running.
**/
BOOLEAN
EFIAPI
QncIsSecureProvisionedSku (
  VOID
  );
#endif