/* * \file libusb1-glue.c * Low-level USB interface glue towards libusb. * * Copyright (C) 2005-2007 Richard A. Low * Copyright (C) 2005-2012 Linus Walleij * Copyright (C) 2006-2011 Marcus Meissner * Copyright (C) 2007 Ted Bullock * Copyright (C) 2008 Chris Bagwell * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. * * Created by Richard Low on 24/12/2005. (as mtp-utils.c) * Modified by Linus Walleij 2006-03-06 * (Notice that Anglo-Saxons use little-endian dates and Swedes * use big-endian dates.) * */ #include "../config.h" #include "libmtp.h" #include "libusb-glue.h" #include "device-flags.h" #include "util.h" #include "ptp.h" #include #include #include #include #include #include #include "ptp-pack.c" /* Aha, older libusb does not have USB_CLASS_PTP */ #ifndef USB_CLASS_PTP #define USB_CLASS_PTP 6 #endif /* * Default USB timeout length. This can be overridden as needed * but should start with a reasonable value so most common * requests can be completed. The original value of 4000 was * not long enough for large file transfer. Also, players can * spend a bit of time collecting data. Higher values also * make connecting/disconnecting more reliable. */ #define USB_TIMEOUT_DEFAULT 20000 #define USB_TIMEOUT_LONG 60000 static inline int get_timeout(PTP_USB* ptp_usb) { if (FLAG_LONG_TIMEOUT(ptp_usb)) { return USB_TIMEOUT_LONG; } return USB_TIMEOUT_DEFAULT; } /* USB Feature selector HALT */ #ifndef USB_FEATURE_HALT #define USB_FEATURE_HALT 0x00 #endif /* Internal data types */ struct mtpdevice_list_struct { openusb_dev_handle_t device; PTPParams *params; PTP_USB *ptp_usb; uint32_t bus_location; struct mtpdevice_list_struct *next; }; typedef struct mtpdevice_list_struct mtpdevice_list_t; static const LIBMTP_device_entry_t mtp_device_table[] = { /* We include an .h file which is shared between us and libgphoto2 */ #include "music-players.h" }; static const int mtp_device_table_size = sizeof (mtp_device_table) / sizeof (LIBMTP_device_entry_t); // Local functions static void init_usb(); static void close_usb(PTP_USB* ptp_usb); static int find_interface_and_endpoints(openusb_dev_handle_t *dev, uint8_t *conf, uint8_t *interface, uint8_t *altsetting, int* inep, int* inep_maxpacket, int* outep, int* outep_maxpacket, int* intep); static void clear_stall(PTP_USB* ptp_usb); static int init_ptp_usb(PTPParams* params, PTP_USB* ptp_usb, openusb_dev_handle_t * dev); static short ptp_write_func(unsigned long, PTPDataHandler*, void *data, unsigned long*); static short ptp_read_func(unsigned long, PTPDataHandler*, void *data, unsigned long*, int); static int usb_get_endpoint_status(PTP_USB* ptp_usb, int ep, uint16_t* status); // Local USB handles. static openusb_handle_t libmtp_openusb_handle; /** * Get a list of the supported USB devices. * * The developers depend on users of this library to constantly * add in to the list of supported devices. What we need is the * device name, USB Vendor ID (VID) and USB Product ID (PID). * put this into a bug ticket at the project homepage, please. * The VID/PID is used to let e.g. udev lift the device to * console userspace access when it's plugged in. * * @param devices a pointer to a pointer that will hold a device * list after the call to this function, if it was * successful. * @param numdevs a pointer to an integer that will hold the number * of devices in the device list if the call was successful. * @return 0 if the list was successfull retrieved, any other * value means failure. */ int LIBMTP_Get_Supported_Devices_List(LIBMTP_device_entry_t * * const devices, int * const numdevs) { *devices = (LIBMTP_device_entry_t *) & mtp_device_table; *numdevs = mtp_device_table_size; return 0; } static void init_usb() { openusb_init(NULL, &libmtp_openusb_handle); } /** * Small recursive function to append a new usb_device to the linked list of * USB MTP devices * @param devlist dynamic linked list of pointers to usb devices with MTP * properties, to be extended with new device. * @param newdevice the new device to add. * @param bus_location bus for this device. * @return an extended array or NULL on failure. */ static mtpdevice_list_t *append_to_mtpdevice_list(mtpdevice_list_t *devlist, openusb_dev_handle_t *newdevice, uint32_t bus_location) { mtpdevice_list_t *new_list_entry; new_list_entry = (mtpdevice_list_t *) malloc(sizeof (mtpdevice_list_t)); if (new_list_entry == NULL) { return NULL; } // Fill in USB device, if we *HAVE* to make a copy of the device do it here. new_list_entry->device = *newdevice; new_list_entry->bus_location = bus_location; new_list_entry->next = NULL; if (devlist == NULL) { return new_list_entry; } else { mtpdevice_list_t *tmp = devlist; while (tmp->next != NULL) { tmp = tmp->next; } tmp->next = new_list_entry; } return devlist; } /** * Small recursive function to free dynamic memory allocated to the linked list * of USB MTP devices * @param devlist dynamic linked list of pointers to usb devices with MTP * properties. * @return nothing */ static void free_mtpdevice_list(mtpdevice_list_t *devlist) { mtpdevice_list_t *tmplist = devlist; if (devlist == NULL) return; while (tmplist != NULL) { mtpdevice_list_t *tmp = tmplist; tmplist = tmplist->next; // Do not free() the fields (ptp_usb, params)! These are used elsewhere. free(tmp); } return; } /** * This checks if a device has an MTP descriptor. The descriptor was * elaborated about in gPhoto bug 1482084, and some official documentation * with no strings attached was published by Microsoft at * http://www.microsoft.com/whdc/system/bus/USB/USBFAQ_intermed.mspx#E3HAC * * @param dev a device struct from libopenusb. * @param dumpfile set to non-NULL to make the descriptors dump out * to this file in human-readable hex so we can scruitinze them. * @return 1 if the device is MTP compliant, 0 if not. */ static int probe_device_descriptor(openusb_dev_handle_t *dev, FILE *dumpfile) { openusb_dev_handle_t *devh = NULL; unsigned char buf[1024], cmd; uint8_t *bufptr = (uint8_t *) &buf; unsigned int buffersize = sizeof(buf); int i; int ret; /* This is to indicate if we find some vendor interface */ int found_vendor_spec_interface = 0; struct usb_device_desc desc; struct usb_interface_desc ifcdesc; ret = openusb_parse_device_desc(libmtp_openusb_handle, *dev, NULL, 0, &desc); if (ret != OPENUSB_SUCCESS) return 0; /* * Don't examine devices that are not likely to * contain any MTP interface, update this the day * you find some weird combination... */ if (!(desc.bDeviceClass == USB_CLASS_PER_INTERFACE || desc.bDeviceClass == USB_CLASS_COMM || desc.bDeviceClass == USB_CLASS_PTP || desc.bDeviceClass == 0xEF || /* Intf. Association Desc.*/ desc.bDeviceClass == USB_CLASS_VENDOR_SPEC)) { return 0; } /* Attempt to open Device on this port */ ret = openusb_open_device(libmtp_openusb_handle, NULL, USB_INIT_DEFAULT, devh); if (ret != OPENUSB_SUCCESS) { /* Could not open this device */ return 0; } /* * This sometimes crashes on the j for loop below * I think it is because config is NULL yet * dev->descriptor.bNumConfigurations > 0 * this check should stop this */ /* * Loop over the device configurations and interfaces. Nokia MTP-capable * handsets (possibly others) typically have the string "MTP" in their * MTP interface descriptions, that's how they can be detected, before * we try the more esoteric "OS descriptors" (below). */ for (i = 0; i < desc.bNumConfigurations; i++) { uint8_t j; struct usb_config_desc config; ret = openusb_parse_config_desc(libmtp_openusb_handle, *dev, NULL, 0, 0, &config); if (ret != OPENUSB_SUCCESS) { LIBMTP_INFO("configdescriptor %d get failed with ret %d in probe_device_descriptor yet dev->descriptor.bNumConfigurations > 0\n", i, ret); continue; } for (j = 0; j < config.bNumInterfaces; j++) { int k = 0; while (openusb_parse_interface_desc(libmtp_openusb_handle, *dev, NULL, 0, 0, j, k++, &ifcdesc) == 0) { /* Current interface descriptor */ /* * MTP interfaces have three endpoints, two bulk and one * interrupt. Don't probe anything else. */ if (ifcdesc.bNumEndpoints != 3) continue; /* * We only want to probe for the OS descriptor if the * device is LIBUSB_CLASS_VENDOR_SPEC or one of the interfaces * in it is, so flag if we find an interface like this. */ if (ifcdesc.bInterfaceClass == USB_CLASS_VENDOR_SPEC) { found_vendor_spec_interface = 1; } /* * Check for Still Image Capture class with PIMA 15740 protocol, * also known as PTP */ /* * Next we search for the MTP substring in the interface name. * For example : "RIM MS/MTP" should work. */ buf[0] = '\0'; // FIXME: DK: Find out how to get the string descriptor for an interface? /* ret = libusb_get_string_descriptor_ascii(devh, config->interface[j].altsetting[k].iInterface, buf, 1024); */ if (ret < 3) continue; if (strstr((char *) buf, "MTP") != NULL) { if (dumpfile != NULL) { fprintf(dumpfile, "Configuration %d, interface %d, altsetting %d:\n", i, j, k); fprintf(dumpfile, " Interface description contains the string \"MTP\"\n"); fprintf(dumpfile, " Device recognized as MTP, no further probing.\n"); } //libusb_free_config_descriptor(config); openusb_close_device(*devh); return 1; } } } } /* * Only probe for OS descriptor if the device is vendor specific * or one of the interfaces found is. */ if (desc.bDeviceClass == USB_CLASS_VENDOR_SPEC || found_vendor_spec_interface) { /* Read the special descriptor */ //ret = libusb_get_descriptor(devh, 0x03, 0xee, buf, sizeof (buf)); ret = openusb_get_raw_desc(libmtp_openusb_handle, *dev, USB_DESC_TYPE_STRING, 0xee, 0, &bufptr, (unsigned short *)&buffersize); /* * If something failed we're probably stalled to we need * to clear the stall off the endpoint and say this is not * MTP. */ if (ret < 0) { /* EP0 is the default control endpoint */ //libusb_clear_halt (devh, 0); openusb_close_device(*devh); openusb_free_raw_desc(buf); return 0; } // Dump it, if requested if (dumpfile != NULL && ret > 0) { fprintf(dumpfile, "Microsoft device descriptor 0xee:\n"); data_dump_ascii(dumpfile, buf, ret, 16); } /* Check if descriptor length is at least 10 bytes */ if (ret < 10) { openusb_close_device(*devh); openusb_free_raw_desc(buf); return 0; } /* Check if this device has a Microsoft Descriptor */ if (!((buf[2] == 'M') && (buf[4] == 'S') && (buf[6] == 'F') && (buf[8] == 'T'))) { openusb_close_device(*devh); openusb_free_raw_desc(buf); return 0; } /* Check if device responds to control message 1 or if there is an error */ cmd = buf[16]; /* ret = libusb_control_transfer (devh, LIBUSB_ENDPOINT_IN | LIBUSB_RECIPIENT_DEVICE | LIBUSB_REQUEST_TYPE_VENDOR, cmd, 0, 4, buf, sizeof(buf), USB_TIMEOUT_DEFAULT); */ struct openusb_ctrl_request ctrl; ctrl.setup.bmRequestType = USB_ENDPOINT_IN | USB_RECIP_DEVICE | USB_REQ_TYPE_VENDOR; ctrl.setup.bRequest = cmd; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 4; ctrl.payload = bufptr; // Out ctrl.length = sizeof (buf); ctrl.timeout = USB_TIMEOUT_DEFAULT; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(*devh, 0, USB_ENDPOINT_IN, &ctrl); // Dump it, if requested if (dumpfile != NULL && ctrl.result.transferred_bytes > 0) { fprintf(dumpfile, "Microsoft device response to control message 1, CMD 0x%02x:\n", cmd); data_dump_ascii(dumpfile, buf, ctrl.result.transferred_bytes, 16); } /* If this is true, the device either isn't MTP or there was an error */ if (ctrl.result.transferred_bytes <= 0x15) { /* TODO: If there was an error, flag it and let the user know somehow */ /* if(ret == -1) {} */ openusb_close_device(*devh); return 0; } /* Check if device is MTP or if it is something like a USB Mass Storage device with Janus DRM support */ if ((buf[0x12] != 'M') || (buf[0x13] != 'T') || (buf[0x14] != 'P')) { openusb_close_device(*devh); return 0; } /* After this point we are probably dealing with an MTP device */ /* * Check if device responds to control message 2, which is * the extended device parameters. Most devices will just * respond with a copy of the same message as for the first * message, some respond with zero-length (which is OK) * and some with pure garbage. We're not parsing the result * so this is not very important. */ /* ret = libusb_control_transfer (devh, LIBUSB_ENDPOINT_IN | LIBUSB_RECIPIENT_DEVICE | LIBUSB_REQUEST_TYPE_VENDOR, cmd, 0, 5, buf, sizeof(buf), USB_TIMEOUT_DEFAULT); */ //struct openusb_ctrl_request ctrl; ctrl.setup.bmRequestType = USB_ENDPOINT_IN | USB_RECIP_DEVICE | USB_REQ_TYPE_VENDOR; ctrl.setup.bRequest = cmd; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 5; ctrl.payload = bufptr; // Out ctrl.length = sizeof (buf); ctrl.timeout = USB_TIMEOUT_DEFAULT; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(*devh, 0, USB_ENDPOINT_IN, &ctrl); // Dump it, if requested if (dumpfile != NULL && ctrl.result.transferred_bytes > 0) { fprintf(dumpfile, "Microsoft device response to control message 2, CMD 0x%02x:\n", cmd); data_dump_ascii(dumpfile, buf, ret, 16); } /* If this is true, the device errored against control message 2 */ if (ctrl.result.transferred_bytes < 0) { /* TODO: Implement callback function to let managing program know there was a problem, along with description of the problem */ LIBMTP_ERROR("Potential MTP Device with VendorID:%04x and " "ProductID:%04x encountered an error responding to " "control message 2.\n" "Problems may arrise but continuing\n", desc.idVendor, desc.idProduct); } else if (dumpfile != NULL && ctrl.result.transferred_bytes == 0) { fprintf(dumpfile, "Zero-length response to control message 2 (OK)\n"); } else if (dumpfile != NULL) { fprintf(dumpfile, "Device responds to control message 2 with some data.\n"); } /* Close the USB device handle */ openusb_close_device(*devh); return 1; } /* Close the USB device handle */ openusb_close_device(*devh); return 0; } /** * This function scans through the connected usb devices on a machine and * if they match known Vendor and Product identifiers appends them to the * dynamic array mtp_device_list. Be sure to call * free_mtpdevice_list(mtp_device_list) when you are done * with it, assuming it is not NULL. * @param mtp_device_list dynamic array of pointers to usb devices with MTP * properties (if this list is not empty, new entries will be appended * to the list). * @return LIBMTP_ERROR_NONE implies that devices have been found, scan the list * appropriately. LIBMTP_ERROR_NO_DEVICE_ATTACHED implies that no * devices have been found. */ static LIBMTP_error_number_t get_mtp_usb_device_list(mtpdevice_list_t ** mtp_device_list) { int nrofdevs = 0; openusb_devid_t *devs = NULL; struct usb_device_desc desc; int ret, i; init_usb(); ret = openusb_get_devids_by_bus(libmtp_openusb_handle, 0, &devs, &nrofdevs); for (i = 0; i < nrofdevs; i++) { openusb_devid_t dev = devs[i]; ret = openusb_parse_device_desc(libmtp_openusb_handle, dev, NULL, 0, &desc); if (ret != OPENUSB_SUCCESS) continue; if (desc.bDeviceClass != USB_CLASS_HUB) { int i; int found = 0; // First check if we know about the device already. // Devices well known to us will not have their descriptors // probed, it caused problems with some devices. for (i = 0; i < mtp_device_table_size; i++) { if (desc.idVendor == mtp_device_table[i].vendor_id && desc.idProduct == mtp_device_table[i].product_id) { /* Append this usb device to the MTP device list */ *mtp_device_list = append_to_mtpdevice_list(*mtp_device_list, &dev, 0); found = 1; break; } } // If we didn't know it, try probing the "OS Descriptor". //if (!found) { // if (probe_device_descriptor(&dev, NULL)) { /* Append this usb device to the MTP USB Device List */ // *mtp_device_list = append_to_mtpdevice_list(*mtp_device_list, &dev, 0); // } /* * By thomas_-_s: Also append devices that are no MTP but PTP devices * if this is commented out. */ /* else { // Check whether the device is no USB hub but a PTP. if ( dev->config != NULL &&dev->config->interface->altsetting->bInterfaceClass == LIBUSB_CLASS_PTP && dev->descriptor.bDeviceClass != LIBUSB_CLASS_HUB ) { *mtp_device_list = append_to_mtpdevice_list(*mtp_device_list, dev, bus->location); } } */ //} } } /* If nothing was found we end up here. */ if (*mtp_device_list == NULL) { return LIBMTP_ERROR_NO_DEVICE_ATTACHED; } return LIBMTP_ERROR_NONE; } /** * Checks if a specific device with a certain bus and device * number has an MTP type device descriptor. * * @param busno the bus number of the device to check * @param deviceno the device number of the device to check * @return 1 if the device is MTP else 0 */ int LIBMTP_Check_Specific_Device(int busno, int devno) { unsigned int nrofdevs; openusb_devid_t **devs = NULL; int i; init_usb(); openusb_get_devids_by_bus(libmtp_openusb_handle, 0, devs, &nrofdevs); for (i = 0; i < nrofdevs; i++) { /* if (bus->location != busno) continue; if (dev->devnum != devno) continue; */ if (probe_device_descriptor(devs[i], NULL)) return 1; } return 0; } /** * Detect the raw MTP device descriptors and return a list of * of the devices found. * * @param devices a pointer to a variable that will hold * the list of raw devices found. This may be NULL * on return if the number of detected devices is zero. * The user shall simply free() this * variable when finished with the raw devices, * in order to release memory. * @param numdevs a pointer to an integer that will hold * the number of devices in the list. This may * be 0. * @return 0 if successful, any other value means failure. */ LIBMTP_error_number_t LIBMTP_Detect_Raw_Devices(LIBMTP_raw_device_t ** devices, int * numdevs) { mtpdevice_list_t *devlist = NULL; mtpdevice_list_t *dev; LIBMTP_error_number_t ret; LIBMTP_raw_device_t *retdevs; int devs = 0; int i, j; ret = get_mtp_usb_device_list(&devlist); if (ret == LIBMTP_ERROR_NO_DEVICE_ATTACHED) { *devices = NULL; *numdevs = 0; return ret; } else if (ret != LIBMTP_ERROR_NONE) { LIBMTP_ERROR("LIBMTP PANIC: get_mtp_usb_device_list() " "error code: %d on line %d\n", ret, __LINE__); return ret; } // Get list size dev = devlist; while (dev != NULL) { devs++; dev = dev->next; } if (devs == 0) { *devices = NULL; *numdevs = 0; return LIBMTP_ERROR_NONE; } // Conjure a device list retdevs = (LIBMTP_raw_device_t *) malloc(sizeof (LIBMTP_raw_device_t) * devs); if (retdevs == NULL) { // Out of memory *devices = NULL; *numdevs = 0; return LIBMTP_ERROR_MEMORY_ALLOCATION; } dev = devlist; i = 0; while (dev != NULL) { int device_known = 0; struct usb_device_desc desc; openusb_parse_device_desc(libmtp_openusb_handle, dev->device, NULL, 0, &desc); // Assign default device info retdevs[i].device_entry.vendor = NULL; retdevs[i].device_entry.vendor_id = desc.idVendor; retdevs[i].device_entry.product = NULL; retdevs[i].device_entry.product_id = desc.idProduct; retdevs[i].device_entry.device_flags = 0x00000000U; // See if we can locate some additional vendor info and device flags for (j = 0; j < mtp_device_table_size; j++) { if (desc.idVendor == mtp_device_table[j].vendor_id && desc.idProduct == mtp_device_table[j].product_id) { device_known = 1; retdevs[i].device_entry.vendor = mtp_device_table[j].vendor; retdevs[i].device_entry.product = mtp_device_table[j].product; retdevs[i].device_entry.device_flags = mtp_device_table[j].device_flags; // This device is known to the developers LIBMTP_ERROR("Device %d (VID=%04x and PID=%04x) is a %s %s.\n", i, desc.idVendor, desc.idProduct, mtp_device_table[j].vendor, mtp_device_table[j].product); break; } } if (!device_known) { device_unknown(i, desc.idVendor, desc.idProduct); } // Save the location on the bus retdevs[i].bus_location = 0; retdevs[i].devnum = openusb_get_devid(libmtp_openusb_handle, &dev->device); i++; dev = dev->next; } *devices = retdevs; *numdevs = i; free_mtpdevice_list(devlist); return LIBMTP_ERROR_NONE; } /** * This routine just dumps out low-level * USB information about the current device. * @param ptp_usb the USB device to get information from. */ void dump_usbinfo(PTP_USB *ptp_usb) { struct usb_device_desc desc; openusb_parse_device_desc(libmtp_openusb_handle, *ptp_usb->handle, NULL, 0, &desc); LIBMTP_INFO(" bcdUSB: %d\n", desc.bcdUSB); LIBMTP_INFO(" bDeviceClass: %d\n", desc.bDeviceClass); LIBMTP_INFO(" bDeviceSubClass: %d\n", desc.bDeviceSubClass); LIBMTP_INFO(" bDeviceProtocol: %d\n", desc.bDeviceProtocol); LIBMTP_INFO(" idVendor: %04x\n", desc.idVendor); LIBMTP_INFO(" idProduct: %04x\n", desc.idProduct); LIBMTP_INFO(" IN endpoint maxpacket: %d bytes\n", ptp_usb->inep_maxpacket); LIBMTP_INFO(" OUT endpoint maxpacket: %d bytes\n", ptp_usb->outep_maxpacket); LIBMTP_INFO(" Raw device info:\n"); LIBMTP_INFO(" Bus location: %d\n", ptp_usb->rawdevice.bus_location); LIBMTP_INFO(" Device number: %d\n", ptp_usb->rawdevice.devnum); LIBMTP_INFO(" Device entry info:\n"); LIBMTP_INFO(" Vendor: %s\n", ptp_usb->rawdevice.device_entry.vendor); LIBMTP_INFO(" Vendor id: 0x%04x\n", ptp_usb->rawdevice.device_entry.vendor_id); LIBMTP_INFO(" Product: %s\n", ptp_usb->rawdevice.device_entry.product); LIBMTP_INFO(" Vendor id: 0x%04x\n", ptp_usb->rawdevice.device_entry.product_id); LIBMTP_INFO(" Device flags: 0x%08x\n", ptp_usb->rawdevice.device_entry.device_flags); // TODO: (void) probe_device_descriptor(dev, stdout); } /** * Retrieve the apropriate playlist extension for this * device. Rather hacky at the moment. This is probably * desired by the managing software, but when creating * lists on the device itself you notice certain preferences. * @param ptp_usb the USB device to get suggestion for. * @return the suggested playlist extension. */ const char *get_playlist_extension(PTP_USB *ptp_usb) { static char creative_pl_extension[] = ".zpl"; static char default_pl_extension[] = ".pla"; struct usb_device_desc desc; openusb_parse_device_desc(libmtp_openusb_handle, *ptp_usb->handle, NULL, 0, &desc); if (desc.idVendor == 0x041e) return creative_pl_extension; return default_pl_extension; } static void libusb_glue_debug(PTPParams *params, const char *format, ...) { va_list args; va_start(args, format); if (params->debug_func != NULL) params->debug_func(params->data, format, args); else { vfprintf(stderr, format, args); fprintf(stderr, "\n"); fflush(stderr); } va_end(args); } static void libusb_glue_error(PTPParams *params, const char *format, ...) { va_list args; va_start(args, format); if (params->error_func != NULL) params->error_func(params->data, format, args); else { vfprintf(stderr, format, args); fprintf(stderr, "\n"); fflush(stderr); } va_end(args); } /* * ptp_read_func() and ptp_write_func() are * based on same functions usb.c in libgphoto2. * Much reading packet logs and having fun with trials and errors * reveals that WMP / Windows is probably using an algorithm like this * for large transfers: * * 1. Send the command (0x0c bytes) if headers are split, else, send * command plus sizeof(endpoint) - 0x0c bytes. * 2. Send first packet, max size to be sizeof(endpoint) but only when using * split headers. Else goto 3. * 3. REPEAT send 0x10000 byte chunks UNTIL remaining bytes < 0x10000 * We call 0x10000 CONTEXT_BLOCK_SIZE. * 4. Send remaining bytes MOD sizeof(endpoint) * 5. Send remaining bytes. If this happens to be exactly sizeof(endpoint) * then also send a zero-length package. * * Further there is some special quirks to handle zero reads from the * device, since some devices can't do them at all due to shortcomings * of the USB slave controller in the device. */ #define CONTEXT_BLOCK_SIZE_1 0x3e00 #define CONTEXT_BLOCK_SIZE_2 0x200 #define CONTEXT_BLOCK_SIZE CONTEXT_BLOCK_SIZE_1+CONTEXT_BLOCK_SIZE_2 static short ptp_read_func( unsigned long size, PTPDataHandler *handler, void *data, unsigned long *readbytes, int readzero ) { PTP_USB *ptp_usb = (PTP_USB *) data; unsigned long toread = 0; int ret = 0; int xread; unsigned long curread = 0; unsigned long written; unsigned char *bytes; int expect_terminator_byte = 0; unsigned long usb_inep_maxpacket_size; unsigned long context_block_size_1; unsigned long context_block_size_2; uint16_t ptp_dev_vendor_id = ptp_usb->rawdevice.device_entry.vendor_id; //"iRiver" device special handling if (ptp_dev_vendor_id == 0x4102 || ptp_dev_vendor_id == 0x1006) { usb_inep_maxpacket_size = ptp_usb->inep_maxpacket; if (usb_inep_maxpacket_size == 0x400) { context_block_size_1 = CONTEXT_BLOCK_SIZE_1 - 0x200; context_block_size_2 = CONTEXT_BLOCK_SIZE_2 + 0x200; } else { context_block_size_1 = CONTEXT_BLOCK_SIZE_1; context_block_size_2 = CONTEXT_BLOCK_SIZE_2; } } struct openusb_bulk_request bulk; // This is the largest block we'll need to read in. bytes = malloc(CONTEXT_BLOCK_SIZE); while (curread < size) { LIBMTP_USB_DEBUG("Remaining size to read: 0x%04lx bytes\n", size - curread); // check equal to condition here if (size - curread < CONTEXT_BLOCK_SIZE) { // this is the last packet toread = size - curread; // this is equivalent to zero read for these devices if (readzero && FLAG_NO_ZERO_READS(ptp_usb) && toread % 64 == 0) { toread += 1; expect_terminator_byte = 1; } } else if (ptp_dev_vendor_id == 0x4102 || ptp_dev_vendor_id == 0x1006) { //"iRiver" device special handling if (curread == 0) // we are first packet, but not last packet toread = context_block_size_1; else if (toread == context_block_size_1) toread = context_block_size_2; else if (toread == context_block_size_2) toread = context_block_size_1; else LIBMTP_INFO("unexpected toread size 0x%04x, 0x%04x remaining bytes\n", (unsigned int) toread, (unsigned int) (size - curread)); } else toread = CONTEXT_BLOCK_SIZE; LIBMTP_USB_DEBUG("Reading in 0x%04lx bytes\n", toread); /* ret = USB_BULK_READ(ptp_usb->handle, ptp_usb->inep, bytes, toread, &xread, ptp_usb->timeout); */ bulk.payload = bytes; bulk.length = toread; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; ret = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->inep, &bulk); xread = bulk.result.transferred_bytes; LIBMTP_USB_DEBUG("Result of read: 0x%04x (%d bytes)\n", ret, xread); if (ret != OPENUSB_SUCCESS) return PTP_ERROR_IO; LIBMTP_USB_DEBUG("<==USB IN\n"); if (xread == 0) LIBMTP_USB_DEBUG("Zero Read\n"); else LIBMTP_USB_DATA(bytes, xread, 16); // want to discard extra byte if (expect_terminator_byte && xread == toread) { LIBMTP_USB_DEBUG("<==USB IN\nDiscarding extra byte\n"); xread--; } int putfunc_ret = handler->putfunc(NULL, handler->priv, xread, bytes); LIBMTP_USB_DEBUG("handler->putfunc ret = 0x%x\n", putfunc_ret); if (putfunc_ret != PTP_RC_OK) return putfunc_ret; ptp_usb->current_transfer_complete += xread; curread += xread; // Increase counters, call callback if (ptp_usb->callback_active) { if (ptp_usb->current_transfer_complete >= ptp_usb->current_transfer_total) { // send last update and disable callback. ptp_usb->current_transfer_complete = ptp_usb->current_transfer_total; ptp_usb->callback_active = 0; } if (ptp_usb->current_transfer_callback != NULL) { int ret; ret = ptp_usb->current_transfer_callback(ptp_usb->current_transfer_complete, ptp_usb->current_transfer_total, ptp_usb->current_transfer_callback_data); if (ret != 0) { return PTP_ERROR_CANCEL; } } } if (xread < toread) /* short reads are common */ break; } if (readbytes) *readbytes = curread; free(bytes); LIBMTP_USB_DEBUG("Pointer Updated\n"); // there might be a zero packet waiting for us... if (readzero && !FLAG_NO_ZERO_READS(ptp_usb) && curread % ptp_usb->outep_maxpacket == 0) { unsigned char temp; int zeroresult = 0, xread; LIBMTP_USB_DEBUG("<==USB IN\n"); LIBMTP_USB_DEBUG("Zero Read\n"); /* zeroresult = USB_BULK_READ(ptp_usb->handle, ptp_usb->inep, &temp, 0, &xread, ptp_usb->timeout); */ bulk.payload = &temp; bulk.length = 0; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; ret = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->inep, &bulk); xread = bulk.result.transferred_bytes; if (zeroresult != OPENUSB_SUCCESS) LIBMTP_INFO("LIBMTP panic: unable to read in zero packet, response 0x%04x", zeroresult); } return PTP_RC_OK; } static short ptp_write_func( unsigned long size, PTPDataHandler *handler, void *data, unsigned long *written ) { PTP_USB *ptp_usb = (PTP_USB *) data; unsigned long towrite = 0; int ret = 0; unsigned long curwrite = 0; unsigned char *bytes; struct openusb_bulk_request bulk; // This is the largest block we'll need to read in. bytes = malloc(CONTEXT_BLOCK_SIZE); if (!bytes) { return PTP_ERROR_IO; } while (curwrite < size) { unsigned long usbwritten = 0; int xwritten; towrite = size - curwrite; if (towrite > CONTEXT_BLOCK_SIZE) { towrite = CONTEXT_BLOCK_SIZE; } else { // This magic makes packets the same size that WMP send them. if (towrite > ptp_usb->outep_maxpacket && towrite % ptp_usb->outep_maxpacket != 0) { towrite -= towrite % ptp_usb->outep_maxpacket; } } int getfunc_ret = handler->getfunc(NULL, handler->priv, towrite, bytes, &towrite); if (getfunc_ret != PTP_RC_OK) return getfunc_ret; while (usbwritten < towrite) { /* ret = USB_BULK_WRITE(ptp_usb->handle, ptp_usb->outep, bytes + usbwritten, towrite - usbwritten, &xwritten, ptp_usb->timeout); */ bulk.payload = bytes + usbwritten; bulk.length = towrite - usbwritten; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; ret = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->outep, &bulk); xwritten = bulk.result.transferred_bytes; LIBMTP_USB_DEBUG("USB OUT==>\n"); if (ret != OPENUSB_SUCCESS) { return PTP_ERROR_IO; } LIBMTP_USB_DATA(bytes + usbwritten, xwritten, 16); // check for result == 0 perhaps too. // Increase counters ptp_usb->current_transfer_complete += xwritten; curwrite += xwritten; usbwritten += xwritten; } // call callback if (ptp_usb->callback_active) { if (ptp_usb->current_transfer_complete >= ptp_usb->current_transfer_total) { // send last update and disable callback. ptp_usb->current_transfer_complete = ptp_usb->current_transfer_total; ptp_usb->callback_active = 0; } if (ptp_usb->current_transfer_callback != NULL) { int ret; ret = ptp_usb->current_transfer_callback(ptp_usb->current_transfer_complete, ptp_usb->current_transfer_total, ptp_usb->current_transfer_callback_data); if (ret != 0) { return PTP_ERROR_CANCEL; } } } if (xwritten < towrite) /* short writes happen */ break; } free(bytes); if (written) { *written = curwrite; } // If this is the last transfer send a zero write if required if (ptp_usb->current_transfer_complete >= ptp_usb->current_transfer_total) { if ((towrite % ptp_usb->outep_maxpacket) == 0) { int xwritten; LIBMTP_USB_DEBUG("USB OUT==>\n"); LIBMTP_USB_DEBUG("Zero Write\n"); /* ret = USB_BULK_WRITE(ptp_usb->handle, ptp_usb->outep, (unsigned char *) "x", 0, &xwritten, ptp_usb->timeout); */ bulk.payload = (unsigned char *) "x"; bulk.length = 0; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; ret = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->outep, &bulk); xwritten = bulk.result.transferred_bytes; } } if (ret != OPENUSB_SUCCESS) return PTP_ERROR_IO; return PTP_RC_OK; } /* memory data get/put handler */ typedef struct { unsigned char *data; unsigned long size, curoff; } PTPMemHandlerPrivate; static uint16_t memory_getfunc(PTPParams* params, void* private, unsigned long wantlen, unsigned char *data, unsigned long *gotlen ) { PTPMemHandlerPrivate* priv = (PTPMemHandlerPrivate*) private; unsigned long tocopy = wantlen; if (priv->curoff + tocopy > priv->size) tocopy = priv->size - priv->curoff; memcpy(data, priv->data + priv->curoff, tocopy); priv->curoff += tocopy; *gotlen = tocopy; return PTP_RC_OK; } static uint16_t memory_putfunc(PTPParams* params, void* private, unsigned long sendlen, unsigned char *data ) { PTPMemHandlerPrivate* priv = (PTPMemHandlerPrivate*) private; if (priv->curoff + sendlen > priv->size) { priv->data = realloc(priv->data, priv->curoff + sendlen); priv->size = priv->curoff + sendlen; } memcpy(priv->data + priv->curoff, data, sendlen); priv->curoff += sendlen; return PTP_RC_OK; } /* init private struct for receiving data. */ static uint16_t ptp_init_recv_memory_handler(PTPDataHandler *handler) { PTPMemHandlerPrivate* priv; priv = malloc(sizeof (PTPMemHandlerPrivate)); handler->priv = priv; handler->getfunc = memory_getfunc; handler->putfunc = memory_putfunc; priv->data = NULL; priv->size = 0; priv->curoff = 0; return PTP_RC_OK; } /* init private struct and put data in for sending data. * data is still owned by caller. */ static uint16_t ptp_init_send_memory_handler(PTPDataHandler *handler, unsigned char *data, unsigned long len ) { PTPMemHandlerPrivate* priv; priv = malloc(sizeof (PTPMemHandlerPrivate)); if (!priv){ return PTP_RC_GeneralError; } handler->priv = priv; handler->getfunc = memory_getfunc; handler->putfunc = memory_putfunc; priv->data = data; priv->size = len; priv->curoff = 0; return PTP_RC_OK; } /* free private struct + data */ static uint16_t ptp_exit_send_memory_handler(PTPDataHandler *handler) { PTPMemHandlerPrivate* priv = (PTPMemHandlerPrivate*) handler->priv; /* data is owned by caller */ free(priv); return PTP_RC_OK; } /* hand over our internal data to caller */ static uint16_t ptp_exit_recv_memory_handler(PTPDataHandler *handler, unsigned char **data, unsigned long *size ) { PTPMemHandlerPrivate* priv = (PTPMemHandlerPrivate*) handler->priv; *data = priv->data; *size = priv->size; free(priv); return PTP_RC_OK; } /* send / receive functions */ uint16_t ptp_usb_sendreq(PTPParams* params, PTPContainer* req, int dataphase) { uint16_t ret; PTPUSBBulkContainer usbreq; PTPDataHandler memhandler; unsigned long written = 0; unsigned long towrite; LIBMTP_USB_DEBUG("REQUEST: 0x%04x, %s\n", req->Code, ptp_get_opcode_name(params, req->Code)); /* build appropriate USB container */ usbreq.length = htod32(PTP_USB_BULK_REQ_LEN - (sizeof (uint32_t)*(5 - req->Nparam))); usbreq.type = htod16(PTP_USB_CONTAINER_COMMAND); usbreq.code = htod16(req->Code); usbreq.trans_id = htod32(req->Transaction_ID); usbreq.payload.params.param1 = htod32(req->Param1); usbreq.payload.params.param2 = htod32(req->Param2); usbreq.payload.params.param3 = htod32(req->Param3); usbreq.payload.params.param4 = htod32(req->Param4); usbreq.payload.params.param5 = htod32(req->Param5); /* send it to responder */ towrite = PTP_USB_BULK_REQ_LEN - (sizeof (uint32_t)*(5 - req->Nparam)); ptp_init_send_memory_handler(&memhandler, (unsigned char*) &usbreq, towrite); ret = ptp_write_func( towrite, &memhandler, params->data, &written ); ptp_exit_send_memory_handler(&memhandler); if (ret != PTP_RC_OK && ret != PTP_ERROR_CANCEL) { ret = PTP_ERROR_IO; } if (written != towrite && ret != PTP_ERROR_CANCEL && ret != PTP_ERROR_IO) { libusb_glue_error(params, "PTP: request code 0x%04x sending req wrote only %ld bytes instead of %d", req->Code, written, towrite ); ret = PTP_ERROR_IO; } return ret; } uint16_t ptp_usb_senddata(PTPParams* params, PTPContainer* ptp, uint64_t size, PTPDataHandler *handler ) { uint16_t ret; int wlen, datawlen; unsigned long written; PTPUSBBulkContainer usbdata; uint64_t bytes_left_to_transfer; PTPDataHandler memhandler; unsigned long packet_size; PTP_USB *ptp_usb = (PTP_USB *) params->data; packet_size = ptp_usb->inep_maxpacket; LIBMTP_USB_DEBUG("SEND DATA PHASE\n"); /* build appropriate USB container */ usbdata.length = htod32(PTP_USB_BULK_HDR_LEN + size); usbdata.type = htod16(PTP_USB_CONTAINER_DATA); usbdata.code = htod16(ptp->Code); usbdata.trans_id = htod32(ptp->Transaction_ID); ((PTP_USB*) params->data)->current_transfer_complete = 0; ((PTP_USB*) params->data)->current_transfer_total = size + PTP_USB_BULK_HDR_LEN; if (params->split_header_data) { datawlen = 0; wlen = PTP_USB_BULK_HDR_LEN; } else { unsigned long gotlen; /* For all camera devices. */ datawlen = (size < PTP_USB_BULK_PAYLOAD_LEN_WRITE) ? size : PTP_USB_BULK_PAYLOAD_LEN_WRITE; wlen = PTP_USB_BULK_HDR_LEN + datawlen; ret = handler->getfunc(params, handler->priv, datawlen, usbdata.payload.data, &gotlen); if (ret != PTP_RC_OK){ return ret; } if (gotlen != datawlen){ return PTP_RC_GeneralError; } } ptp_init_send_memory_handler(&memhandler, (unsigned char *) &usbdata, wlen); /* send first part of data */ ret = ptp_write_func(wlen, &memhandler, params->data, &written); ptp_exit_send_memory_handler(&memhandler); if (ret != PTP_RC_OK) { return ret; } if (size <= datawlen) return ret; /* if everything OK send the rest */ bytes_left_to_transfer = size - datawlen; ret = PTP_RC_OK; while (bytes_left_to_transfer > 0) { int max_long_transfer = ULONG_MAX + 1 - packet_size; ret = ptp_write_func (bytes_left_to_transfer > max_long_transfer ? max_long_transfer : bytes_left_to_transfer, handler, params->data, &written); if (ret != PTP_RC_OK){ break; } if (written == 0) { ret = PTP_ERROR_IO; break; } bytes_left_to_transfer -= written; } if (ret != PTP_RC_OK && ret != PTP_ERROR_CANCEL) ret = PTP_ERROR_IO; return ret; } static uint16_t ptp_usb_getpacket(PTPParams *params, PTPUSBBulkContainer *packet, unsigned long *rlen) { PTPDataHandler memhandler; uint16_t ret; unsigned char *x = NULL; unsigned long packet_size; PTP_USB *ptp_usb = (PTP_USB *) params->data; packet_size = ptp_usb->inep_maxpacket; /* read the header and potentially the first data */ if (params->response_packet_size > 0) { /* If there is a buffered packet, just use it. */ memcpy(packet, params->response_packet, params->response_packet_size); *rlen = params->response_packet_size; free(params->response_packet); params->response_packet = NULL; params->response_packet_size = 0; /* Here this signifies a "virtual read" */ return PTP_RC_OK; } ptp_init_recv_memory_handler(&memhandler); ret = ptp_read_func(packet_size, &memhandler, params->data, rlen, 0); ptp_exit_recv_memory_handler(&memhandler, &x, rlen); if (x) { memcpy(packet, x, *rlen); free(x); } return ret; } uint16_t ptp_usb_getdata(PTPParams* params, PTPContainer* ptp, PTPDataHandler *handler) { uint16_t ret; PTPUSBBulkContainer usbdata; unsigned long written; PTP_USB *ptp_usb = (PTP_USB *) params->data; int putfunc_ret; LIBMTP_USB_DEBUG("GET DATA PHASE\n"); struct openusb_bulk_request bulk; memset(&usbdata, 0, sizeof (usbdata)); do { unsigned long len, rlen; ret = ptp_usb_getpacket(params, &usbdata, &rlen); if (ret != PTP_RC_OK) { ret = PTP_ERROR_IO; break; } if (dtoh16(usbdata.type) != PTP_USB_CONTAINER_DATA) { ret = PTP_ERROR_DATA_EXPECTED; break; } if (dtoh16(usbdata.code) != ptp->Code) { if (FLAG_IGNORE_HEADER_ERRORS(ptp_usb)) { libusb_glue_debug(params, "ptp2/ptp_usb_getdata: detected a broken " "PTP header, code field insane, expect problems! (But continuing)"); // Repair the header, so it won't wreak more havoc, don't just ignore it. // Typically these two fields will be broken. usbdata.code = htod16(ptp->Code); usbdata.trans_id = htod32(ptp->Transaction_ID); ret = PTP_RC_OK; } else { ret = dtoh16(usbdata.code); // This filters entirely insane garbage return codes, but still // makes it possible to return error codes in the code field when // getting data. It appears Windows ignores the contents of this // field entirely. if (ret < PTP_RC_Undefined || ret > PTP_RC_SpecificationOfDestinationUnsupported) { libusb_glue_debug(params, "ptp2/ptp_usb_getdata: detected a broken " "PTP header, code field insane."); ret = PTP_ERROR_IO; } break; } } if (rlen == ptp_usb->inep_maxpacket) { /* Copy first part of data to 'data' */ putfunc_ret = handler->putfunc( params, handler->priv, rlen - PTP_USB_BULK_HDR_LEN, usbdata.payload.data ); if (putfunc_ret != PTP_RC_OK) return putfunc_ret; /* stuff data directly to passed data handler */ while (1) { unsigned long readdata; uint16_t xret; xret = ptp_read_func( 0x20000000, handler, params->data, &readdata, 0 ); if (xret != PTP_RC_OK) return xret; if (readdata < 0x20000000) break; } return PTP_RC_OK; } if (rlen > dtoh32(usbdata.length)) { /* * Buffer the surplus response packet if it is >= * PTP_USB_BULK_HDR_LEN * (i.e. it is probably an entire package) * else discard it as erroneous surplus data. * This will even work if more than 2 packets appear * in the same transaction, they will just be handled * iteratively. * * Marcus observed stray bytes on iRiver devices; * these are still discarded. */ unsigned int packlen = dtoh32(usbdata.length); unsigned int surplen = rlen - packlen; if (surplen >= PTP_USB_BULK_HDR_LEN) { params->response_packet = malloc(surplen); memcpy(params->response_packet, (uint8_t *) & usbdata + packlen, surplen); params->response_packet_size = surplen; /* Ignore reading one extra byte if device flags have been set */ } else if (!FLAG_NO_ZERO_READS(ptp_usb) && (rlen - dtoh32(usbdata.length) == 1)) { libusb_glue_debug(params, "ptp2/ptp_usb_getdata: read %d bytes " "too much, expect problems!", rlen - dtoh32(usbdata.length)); } rlen = packlen; } /* For most PTP devices rlen is 512 == sizeof(usbdata) * here. For MTP devices splitting header and data it might * be 12. */ /* Evaluate full data length. */ len = dtoh32(usbdata.length) - PTP_USB_BULK_HDR_LEN; /* autodetect split header/data MTP devices */ if (dtoh32(usbdata.length) > 12 && (rlen == 12)) params->split_header_data = 1; /* Copy first part of data to 'data' */ putfunc_ret = handler->putfunc( params, handler->priv, rlen - PTP_USB_BULK_HDR_LEN, usbdata.payload.data ); if (putfunc_ret != PTP_RC_OK) return putfunc_ret; if (FLAG_NO_ZERO_READS(ptp_usb) && len + PTP_USB_BULK_HDR_LEN == ptp_usb->inep_maxpacket) { LIBMTP_USB_DEBUG("Reading in extra terminating byte\n"); // need to read in extra byte and discard it int result = 0, xread; unsigned char byte = 0; /* result = USB_BULK_READ(ptp_usb->handle, ptp_usb->inep, &byte, 1, &xread, ptp_usb->timeout); */ bulk.payload = &byte; bulk.length = 1; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; result = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->inep, &bulk); xread = bulk.result.transferred_bytes; if (result != 1) LIBMTP_INFO("Could not read in extra byte for %d bytes long file, return value 0x%04x\n", ptp_usb->inep_maxpacket, result); } else if (len + PTP_USB_BULK_HDR_LEN == ptp_usb->inep_maxpacket && params->split_header_data == 0) { int zeroresult = 0, xread; unsigned char zerobyte = 0; LIBMTP_INFO("Reading in zero packet after header\n"); /* zeroresult = USB_BULK_READ(ptp_usb->handle, ptp_usb->inep, &zerobyte, 0, &xread, ptp_usb->timeout); */ bulk.payload = &zerobyte; bulk.length = 0; bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; zeroresult = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->inep, &bulk); xread = bulk.result.transferred_bytes; if (zeroresult != 0) LIBMTP_INFO("LIBMTP panic: unable to read in zero packet, response 0x%04x", zeroresult); } /* Is that all of data? */ if (len + PTP_USB_BULK_HDR_LEN <= rlen) { break; } ret = ptp_read_func(len - (rlen - PTP_USB_BULK_HDR_LEN), handler, params->data, &rlen, 1); if (ret != PTP_RC_OK) { break; } } while (0); return ret; } uint16_t ptp_usb_getresp(PTPParams* params, PTPContainer* resp) { uint16_t ret; unsigned long rlen; PTPUSBBulkContainer usbresp; PTP_USB *ptp_usb = (PTP_USB *) (params->data); LIBMTP_USB_DEBUG("RESPONSE: "); memset(&usbresp, 0, sizeof (usbresp)); /* read response, it should never be longer than sizeof(usbresp) */ ret = ptp_usb_getpacket(params, &usbresp, &rlen); // Fix for bevahiour reported by Scott Snyder on Samsung YP-U3. The player // sends a packet containing just zeroes of length 2 (up to 4 has been seen too) // after a NULL packet when it should send the response. This code ignores // such illegal packets. while (ret == PTP_RC_OK && rlen < PTP_USB_BULK_HDR_LEN && usbresp.length == 0) { libusb_glue_debug(params, "ptp_usb_getresp: detected short response " "of %d bytes, expect problems! (re-reading " "response), rlen"); ret = ptp_usb_getpacket(params, &usbresp, &rlen); } if (ret != PTP_RC_OK) { ret = PTP_ERROR_IO; } else if (dtoh16(usbresp.type) != PTP_USB_CONTAINER_RESPONSE) { ret = PTP_ERROR_RESP_EXPECTED; } else if (dtoh16(usbresp.code) != resp->Code) { ret = dtoh16(usbresp.code); } LIBMTP_USB_DEBUG("%04x\n", ret); if (ret != PTP_RC_OK) { /* libusb_glue_error (params, "PTP: request code 0x%04x getting resp error 0x%04x", resp->Code, ret);*/ return ret; } /* build an appropriate PTPContainer */ resp->Code = dtoh16(usbresp.code); resp->SessionID = params->session_id; resp->Transaction_ID = dtoh32(usbresp.trans_id); if (FLAG_IGNORE_HEADER_ERRORS(ptp_usb)) { if (resp->Transaction_ID != params->transaction_id - 1) { libusb_glue_debug(params, "ptp_usb_getresp: detected a broken " "PTP header, transaction ID insane, expect " "problems! (But continuing)"); // Repair the header, so it won't wreak more havoc. resp->Transaction_ID = params->transaction_id - 1; } } resp->Param1 = dtoh32(usbresp.payload.params.param1); resp->Param2 = dtoh32(usbresp.payload.params.param2); resp->Param3 = dtoh32(usbresp.payload.params.param3); resp->Param4 = dtoh32(usbresp.payload.params.param4); resp->Param5 = dtoh32(usbresp.payload.params.param5); return ret; } /* Event handling functions */ /* PTP Events wait for or check mode */ #define PTP_EVENT_CHECK 0x0000 /* waits for */ #define PTP_EVENT_CHECK_FAST 0x0001 /* checks */ static inline uint16_t ptp_usb_event(PTPParams* params, PTPContainer* event, int wait) { uint16_t ret; int result, xread; unsigned long rlen; PTPUSBEventContainer usbevent; PTP_USB *ptp_usb = (PTP_USB *) (params->data); struct openusb_bulk_request bulk; memset(&usbevent, 0, sizeof (usbevent)); if ((params == NULL) || (event == NULL)) return PTP_ERROR_BADPARAM; ret = PTP_RC_OK; switch (wait) { case PTP_EVENT_CHECK: /* result = USB_BULK_READ(ptp_usb->handle, ptp_usb->intep, (unsigned char *) &usbevent, sizeof (usbevent), &xread, 0); */ bulk.payload = (unsigned char *) &usbevent; bulk.length = sizeof (usbevent); bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; result = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->intep, &bulk); xread = bulk.result.transferred_bytes; if (result == 0) { /* result = USB_BULK_READ(ptp_usb->handle, ptp_usb->intep, (unsigned char *) &usbevent, sizeof (usbevent), &xread, 0); */ bulk.payload = (unsigned char *) &usbevent; bulk.length = sizeof (usbevent); bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; result = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->intep, &bulk); xread = bulk.result.transferred_bytes; } if (result < 0) ret = PTP_ERROR_IO; break; case PTP_EVENT_CHECK_FAST: /* result = USB_BULK_READ(ptp_usb->handle, ptp_usb->intep, (unsigned char *) &usbevent, sizeof (usbevent), &xread, ptp_usb->timeout); */ bulk.payload = (unsigned char *) &usbevent; bulk.length = sizeof (usbevent); bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; result = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->intep, &bulk); xread = bulk.result.transferred_bytes; if (result == 0) { /* result = USB_BULK_READ(ptp_usb->handle, ptp_usb->intep, (unsigned char *) &usbevent, sizeof (usbevent), &xread, ptp_usb->timeout); */ bulk.payload = (unsigned char *) &usbevent; bulk.length = sizeof (usbevent); bulk.timeout = ptp_usb->timeout; bulk.flags = 0; bulk.next = NULL; result = openusb_bulk_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->intep, &bulk); xread = bulk.result.transferred_bytes; } if (result < 0) ret = PTP_ERROR_IO; break; default: ret = PTP_ERROR_BADPARAM; break; } if (ret != PTP_RC_OK) { libusb_glue_error(params, "PTP: reading event an error 0x%04x occurred", ret); return PTP_ERROR_IO; } rlen = result; if (rlen < 8) { libusb_glue_error(params, "PTP: reading event an short read of %ld bytes occurred", rlen); return PTP_ERROR_IO; } /* if we read anything over interrupt endpoint it must be an event */ /* build an appropriate PTPContainer */ event->Code = dtoh16(usbevent.code); event->SessionID = params->session_id; event->Transaction_ID = dtoh32(usbevent.trans_id); event->Param1 = dtoh32(usbevent.param1); event->Param2 = dtoh32(usbevent.param2); event->Param3 = dtoh32(usbevent.param3); return ret; } uint16_t ptp_usb_event_check(PTPParams* params, PTPContainer* event) { return ptp_usb_event(params, event, PTP_EVENT_CHECK_FAST); } uint16_t ptp_usb_event_wait(PTPParams* params, PTPContainer* event) { return ptp_usb_event(params, event, PTP_EVENT_CHECK); } uint16_t ptp_usb_event_async (PTPParams* params, PTPEventCbFn cb, void *user_data) { /* Unsupported */ return PTP_ERROR_CANCEL; } int LIBMTP_Handle_Events_Timeout_Completed(struct timeval *tv, int *completed) { /* Unsupported */ return -12; } uint16_t ptp_usb_control_cancel_request(PTPParams *params, uint32_t transactionid) { PTP_USB *ptp_usb = (PTP_USB *) (params->data); int ret; unsigned char buffer[6]; htod16a(&buffer[0], PTP_EC_CancelTransaction); htod32a(&buffer[2], transactionid); /* ret = libusb_control_transfer(ptp_usb->handle, LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, 0x64, 0x0000, 0x0000, buffer, sizeof(buffer), ptp_usb->timeout); */ struct openusb_ctrl_request ctrl; ctrl.setup.bmRequestType = USB_REQ_TYPE_CLASS | USB_RECIP_INTERFACE; ctrl.setup.bRequest = 0x64; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 0; ctrl.payload = (unsigned char *)&buffer; // Out ctrl.length = sizeof (buffer); ctrl.timeout = ptp_usb->timeout; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(*ptp_usb->handle, ptp_usb->interface, ptp_usb->outep, &ctrl); if (ctrl.result.transferred_bytes < sizeof (buffer)) return PTP_ERROR_IO; return PTP_RC_OK; } static int init_ptp_usb(PTPParams* params, PTP_USB* ptp_usb, openusb_dev_handle_t* dev) { openusb_dev_handle_t device_handle; unsigned char buf[255]; int ret, usbresult; params->sendreq_func = ptp_usb_sendreq; params->senddata_func = ptp_usb_senddata; params->getresp_func = ptp_usb_getresp; params->getdata_func = ptp_usb_getdata; params->cancelreq_func = ptp_usb_control_cancel_request; params->data = ptp_usb; params->transaction_id = 0; /* * This is hardcoded here since we have no devices whatsoever that are BE. * Change this the day we run into our first BE device (if ever). */ params->byteorder = PTP_DL_LE; ptp_usb->timeout = get_timeout(ptp_usb); ret = openusb_open_device(libmtp_openusb_handle, *dev, USB_INIT_DEFAULT, &device_handle); if (ret != OPENUSB_SUCCESS) { perror("usb_open()"); return -1; } ptp_usb->handle = malloc(sizeof(openusb_dev_handle_t)); *ptp_usb->handle = device_handle; /* * If this device is known to be wrongfully claimed by other kernel * drivers (such as mass storage), then try to unload it to make it * accessible from user space. * Note: OpenUSB doesn't support this type of operation? */ /* if (FLAG_UNLOAD_DRIVER(ptp_usb) && libusb_kernel_driver_active (device_handle, ptp_usb->interface) ) { if (OPENUSB_SUCCESS != libusb_detach_kernel_driver (device_handle, ptp_usb->interface)) { return -1; } } */ // It seems like on kernel 2.6.31 if we already have it open on another // pthread in our app, we'll get an error if we try to claim it again, // but that error is harmless because our process already claimed the interface usbresult = openusb_claim_interface(device_handle, ptp_usb->interface, USB_INIT_DEFAULT); if (usbresult != 0) fprintf(stderr, "ignoring usb_claim_interface = %d", usbresult); if (FLAG_SWITCH_MODE_BLACKBERRY(ptp_usb)) { int ret; // FIXME : Only for BlackBerry Storm // What does it mean? Maybe switch mode... // This first control message is absolutely necessary usleep(1000); /* ret = libusb_control_transfer(device_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN, 0xaa, 0x00, 0x04, buf, 0x40, 1000); */ struct openusb_ctrl_request ctrl; ctrl.setup.bmRequestType = USB_REQ_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN; ctrl.setup.bRequest = 0xaa; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 4; ctrl.payload = (unsigned char *)&buf; // Out ctrl.length = 0x40; ctrl.timeout = 1000; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(device_handle, ptp_usb->interface, ptp_usb->outep, &ctrl); LIBMTP_USB_DEBUG("BlackBerry magic part 1:\n"); LIBMTP_USB_DATA(buf, ctrl.result.transferred_bytes, 16); usleep(1000); // This control message is unnecessary /* ret = libusb_control_transfer(device_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN, 0xa5, 0x00, 0x01, buf, 0x02, 1000); */ ctrl.setup.bmRequestType = USB_REQ_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN; ctrl.setup.bRequest = 0xa5; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 1; ctrl.payload = (unsigned char *)&buf; // Out ctrl.length = 0x02; ctrl.timeout = 1000; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(device_handle, ptp_usb->interface, ptp_usb->outep, &ctrl); LIBMTP_USB_DEBUG("BlackBerry magic part 2:\n"); LIBMTP_USB_DATA(buf, ctrl.result.transferred_bytes, 16); usleep(1000); // This control message is unnecessary /* ret = libusb_control_transfer(device_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN, 0xa8, 0x00, 0x01, buf, 0x05, 1000); */ ctrl.setup.bmRequestType = USB_REQ_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN; ctrl.setup.bRequest = 0xa8; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 1; ctrl.payload = (unsigned char *)&buf; // Out ctrl.length = 0x05; ctrl.timeout = 1000; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(device_handle, ptp_usb->interface, ptp_usb->outep, &ctrl); LIBMTP_USB_DEBUG("BlackBerry magic part 3:\n"); LIBMTP_USB_DATA(buf, ctrl.result.transferred_bytes, 16); usleep(1000); // This control message is unnecessary /* ret = libusb_control_transfer(device_handle, LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN, 0xa8, 0x00, 0x01, buf, 0x11, 1000); */ ctrl.setup.bmRequestType = USB_REQ_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN; ctrl.setup.bRequest = 0xa8; ctrl.setup.wValue = 0; ctrl.setup.wIndex = 1; ctrl.payload = (unsigned char *)&buf; // Out ctrl.length = 0x11; ctrl.timeout = 1000; ctrl.next = NULL; ctrl.flags = 0; ret = openusb_ctrl_xfer(device_handle, ptp_usb->interface, ptp_usb->outep, &ctrl); LIBMTP_USB_DEBUG("BlackBerry magic part 4:\n"); LIBMTP_USB_DATA(buf, ctrl.result.transferred_bytes, 16); usleep(1000); } return 0; } static void clear_stall(PTP_USB* ptp_usb) { uint16_t status; int ret; /* check the inep status */ /* status = 0; ret = usb_get_endpoint_status(ptp_usb, ptp_usb->inep, &status); if (ret < 0) { perror("inep: usb_get_endpoint_status()"); } else if (status) { LIBMTP_INFO("Clearing stall on IN endpoint\n"); ret = libusb_clear_halt(ptp_usb->handle, ptp_usb->inep); if (ret != OPENUSB_SUCCESS) { perror("usb_clear_stall_feature()"); } } /* check the outep status */ /*status = 0; ret = usb_get_endpoint_status(ptp_usb, ptp_usb->outep, &status); if (ret < 0) { perror("outep: usb_get_endpoint_status()"); } else if (status) { LIBMTP_INFO("Clearing stall on OUT endpoint\n"); ret = libusb_clear_halt(ptp_usb->handle, ptp_usb->outep); if (ret != OPENUSB_SUCCESS) { perror("usb_clear_stall_feature()"); } } */ /* TODO: do we need this for INTERRUPT (ptp_usb->intep) too? */ } static void clear_halt(PTP_USB* ptp_usb) { int ret; /* ret = libusb_clear_halt(ptp_usb->handle, ptp_usb->inep); if (ret < 0) { perror("usb_clear_halt() on IN endpoint"); } ret = libusb_clear_halt(ptp_usb->handle, ptp_usb->outep); if (ret < 0) { perror("usb_clear_halt() on OUT endpoint"); } ret = libusb_clear_halt(ptp_usb->handle, ptp_usb->intep); if (ret < 0) { perror("usb_clear_halt() on INTERRUPT endpoint"); } */ } static void close_usb(PTP_USB* ptp_usb) { if (!FLAG_NO_RELEASE_INTERFACE(ptp_usb)) { /* * Clear any stalled endpoints * On misbehaving devices designed for Windows/Mac, quote from: * http://www2.one-eyed-alien.net/~mdharm/linux-usb/target_offenses.txt * Device does Bad Things(tm) when it gets a GET_STATUS after CLEAR_HALT * (...) Windows, when clearing a stall, only sends the CLEAR_HALT command, * and presumes that the stall has cleared. Some devices actually choke * if the CLEAR_HALT is followed by a GET_STATUS (used to determine if the * STALL is persistant or not). */ clear_stall(ptp_usb); // Clear halts on any endpoints clear_halt(ptp_usb); // Added to clear some stuff on the OUT endpoint // TODO: is this good on the Mac too? // HINT: some devices may need that you comment these two out too. //libusb_clear_halt(ptp_usb->handle, ptp_usb->outep); //libusb_release_interface(ptp_usb->handle, (int) ptp_usb->interface); } if (FLAG_FORCE_RESET_ON_CLOSE(ptp_usb)) { /* * Some devices really love to get reset after being * disconnected. Again, since Windows never disconnects * a device closing behaviour is seldom or never exercised * on devices when engineered and often error prone. * Reset may help some. */ openusb_reset(*ptp_usb->handle); } openusb_close_device(*ptp_usb->handle); } /** * Self-explanatory? */ static int find_interface_and_endpoints(openusb_dev_handle_t *dev, uint8_t *conf, uint8_t *interface, uint8_t *altsetting, int* inep, int* inep_maxpacket, int* outep, int *outep_maxpacket, int* intep) { uint8_t i; int ret; struct usb_device_desc desc; ret = openusb_parse_device_desc(libmtp_openusb_handle, *dev, NULL, 0, &desc); if (ret != OPENUSB_SUCCESS) return -1; // Loop over the device configurations for (i = 0; i < desc.bNumConfigurations; i++) { uint8_t j; struct usb_config_desc config; ret = openusb_parse_config_desc(libmtp_openusb_handle, *dev, NULL, 0, i, &config); if (ret != OPENUSB_SUCCESS) continue; *conf = desc.bConfigurationValue; // Loop over each configurations interfaces for (j = 0; j < config.bNumInterfaces; j++) { uint8_t k; uint8_t no_ep; int found_inep = 0; int found_outep = 0; int found_intep = 0; struct usb_endpoint_desc ep; struct usb_interface_desc ifcdesc; openusb_parse_interface_desc(libmtp_openusb_handle, *dev, NULL, 0, i, j, 0, &ifcdesc); // MTP devices shall have 3 endpoints, ignore those interfaces // that haven't. no_ep = ifcdesc.bNumEndpoints; if (no_ep != 3) continue; *interface = ifcdesc.bInterfaceNumber; *altsetting = ifcdesc.bAlternateSetting; // Loop over the three endpoints to locate two bulk and // one interrupt endpoint and FAIL if we cannot, and continue. for (k = 0; k < no_ep; k++) { openusb_parse_endpoint_desc(libmtp_openusb_handle, *dev, NULL, 0, i, j, 0, k, &ep); if (ep.bmAttributes == USB_ENDPOINT_TYPE_BULK) { if ((ep.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_ENDPOINT_DIR_MASK) { *inep = ep.bEndpointAddress; *inep_maxpacket = ep.wMaxPacketSize; found_inep = 1; } if ((ep.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == 0) { *outep = ep.bEndpointAddress; *outep_maxpacket = ep.wMaxPacketSize; found_outep = 1; } } else if (ep.bmAttributes == USB_ENDPOINT_TYPE_INTERRUPT) { if ((ep.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_ENDPOINT_DIR_MASK) { *intep = ep.bEndpointAddress; found_intep = 1; } } } if (found_inep && found_outep && found_intep) { // We assigned the endpoints so return here. return 0; } // Else loop to next interface/config } } return -1; } /** * This function assigns params and usbinfo given a raw device * as input. * @param device the device to be assigned. * @param usbinfo a pointer to the new usbinfo. * @return an error code. */ LIBMTP_error_number_t configure_usb_device(LIBMTP_raw_device_t *device, PTPParams *params, void **usbinfo) { PTP_USB *ptp_usb; openusb_devid_t *ldevice; uint16_t ret = 0; int err, found = 0, i; unsigned int nrofdevs; openusb_devid_t *devs = NULL; struct usb_device_desc desc; /* See if we can find this raw device again... */ init_usb(); openusb_get_devids_by_bus(libmtp_openusb_handle, 0, &devs, &nrofdevs); for (i = 0; i < nrofdevs; i++) { /* if (libusb_get_bus_number(devs[i]) != device->bus_location) continue; if (libusb_get_device_address(devs[i]) != device->devnum) continue; */ ret = openusb_parse_device_desc(libmtp_openusb_handle, devs[i], NULL, 0, &desc); if (ret != OPENUSB_SUCCESS) continue; if (desc.idVendor == device->device_entry.vendor_id && desc.idProduct == device->device_entry.product_id) { ldevice = &devs[i]; found = 1; break; } } /* Device has gone since detecting raw devices! */ if (!found) { openusb_free_devid_list(devs); return LIBMTP_ERROR_NO_DEVICE_ATTACHED; } /* Allocate structs */ ptp_usb = (PTP_USB *) malloc(sizeof (PTP_USB)); if (ptp_usb == NULL) { openusb_free_devid_list(devs); return LIBMTP_ERROR_MEMORY_ALLOCATION; } /* Start with a blank slate (includes setting device_flags to 0) */ memset(ptp_usb, 0, sizeof (PTP_USB)); /* Copy the raw device */ memcpy(&ptp_usb->rawdevice, device, sizeof (LIBMTP_raw_device_t)); /* * Some devices must have their "OS Descriptor" massaged in order * to work. */ if (FLAG_ALWAYS_PROBE_DESCRIPTOR(ptp_usb)) { // Massage the device descriptor (void) probe_device_descriptor(ldevice, NULL); } /* Assign interface and endpoints to usbinfo... */ err = find_interface_and_endpoints(ldevice, &ptp_usb->conf, &ptp_usb->interface, &ptp_usb->altsetting, &ptp_usb->inep, &ptp_usb->inep_maxpacket, &ptp_usb->outep, &ptp_usb->outep_maxpacket, &ptp_usb->intep); if (err) { openusb_free_devid_list(devs); LIBMTP_ERROR("LIBMTP PANIC: Unable to find interface & endpoints of device\n"); return LIBMTP_ERROR_CONNECTING; } /* Copy USB version number */ ptp_usb->bcdusb = desc.bcdUSB; /* Attempt to initialize this device */ if (init_ptp_usb(params, ptp_usb, ldevice) < 0) { LIBMTP_ERROR("LIBMTP PANIC: Unable to initialize device\n"); return LIBMTP_ERROR_CONNECTING; } /* * This works in situations where previous bad applications * have not used LIBMTP_Release_Device on exit */ if ((ret = ptp_opensession(params, 1)) == PTP_ERROR_IO) { LIBMTP_ERROR("PTP_ERROR_IO: failed to open session, trying again after resetting USB interface\n"); LIBMTP_ERROR("LIBMTP libusb: Attempt to reset device\n"); openusb_reset(*ptp_usb->handle); close_usb(ptp_usb); if (init_ptp_usb(params, ptp_usb, ldevice) < 0) { LIBMTP_ERROR("LIBMTP PANIC: Could not init USB on second attempt\n"); return LIBMTP_ERROR_CONNECTING; } /* Device has been reset, try again */ if ((ret = ptp_opensession(params, 1)) == PTP_ERROR_IO) { LIBMTP_ERROR("LIBMTP PANIC: failed to open session on second attempt\n"); return LIBMTP_ERROR_CONNECTING; } } /* Was the transaction id invalid? Try again */ if (ret == PTP_RC_InvalidTransactionID) { LIBMTP_ERROR("LIBMTP WARNING: Transaction ID was invalid, increment and try again\n"); params->transaction_id += 10; ret = ptp_opensession(params, 1); } if (ret != PTP_RC_SessionAlreadyOpened && ret != PTP_RC_OK) { LIBMTP_ERROR("LIBMTP PANIC: Could not open session! " "(Return code %d)\n Try to reset the device.\n", ret); openusb_release_interface(*ptp_usb->handle, ptp_usb->interface); return LIBMTP_ERROR_CONNECTING; } /* OK configured properly */ *usbinfo = (void *) ptp_usb; return LIBMTP_ERROR_NONE; } void close_device(PTP_USB *ptp_usb, PTPParams *params) { if (ptp_closesession(params) != PTP_RC_OK) LIBMTP_ERROR("ERROR: Could not close session!\n"); close_usb(ptp_usb); } void set_usb_device_timeout(PTP_USB *ptp_usb, int timeout) { ptp_usb->timeout = timeout; } void get_usb_device_timeout(PTP_USB *ptp_usb, int *timeout) { *timeout = ptp_usb->timeout; } int guess_usb_speed(PTP_USB *ptp_usb) { int bytes_per_second; /* * We don't know the actual speeds so these are rough guesses * from the info you can find here: * http://en.wikipedia.org/wiki/USB#Transfer_rates * http://www.barefeats.com/usb2.html */ switch (ptp_usb->bcdusb & 0xFF00) { case 0x0100: /* 1.x USB versions let's say 1MiB/s */ bytes_per_second = 1 * 1024 * 1024; break; case 0x0200: case 0x0300: /* USB 2.0 nominal speed 18MiB/s */ /* USB 3.0 won't be worse? */ bytes_per_second = 18 * 1024 * 1024; break; default: /* Half-guess something? */ bytes_per_second = 1 * 1024 * 1024; break; } return bytes_per_second; } static int usb_get_endpoint_status(PTP_USB* ptp_usb, int ep, uint16_t* status) { /* return libusb_control_transfer(ptp_usb->handle, LIBUSB_ENDPOINT_IN|LIBUSB_RECIPIENT_ENDPOINT, LIBUSB_REQUEST_GET_STATUS, USB_FEATURE_HALT, ep, (unsigned char *) status, 2, ptp_usb->timeout); */ struct openusb_ctrl_request ctrl; ctrl.flags = 0; ctrl.length = 2; ctrl.payload = (unsigned char *)status; ctrl.timeout = ptp_usb->timeout; ctrl.next = NULL; ctrl.setup.bRequest = USB_REQ_GET_STATUS; ctrl.setup.bmRequestType = USB_ENDPOINT_IN | USB_RECIP_ENDPOINT; ctrl.setup.wIndex = ep; ctrl.setup.wValue = USB_FEATURE_HALT; openusb_ctrl_xfer(*ptp_usb->handle, ptp_usb->interface, ep, &ctrl); return ctrl.result.status; }