/*
 * soft_stitcher.cpp - soft stitcher implementation
 *
 *  Copyright (c) 2017 Intel Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 * Author: Wind Yuan <feng.yuan@intel.com>
 */

#include "soft_stitcher.h"
#include "soft_blender.h"
#include "soft_geo_mapper.h"
#include "soft_video_buf_allocator.h"
#include "interface/feature_match.h"
#include "surview_fisheye_dewarp.h"
#include "soft_copy_task.h"
#include "xcam_utils.h"
#include <map>

#define ENABLE_FEATURE_MATCH HAVE_OPENCV

#if ENABLE_FEATURE_MATCH
#include "cv_capi_feature_match.h"
#ifndef ANDROID
#include <opencv2/core/ocl.hpp>
#endif
#endif

#define SOFT_STITCHER_ALIGNMENT_X 8
#define SOFT_STITCHER_ALIGNMENT_Y 4

#define MAP_FACTOR_X  16
#define MAP_FACTOR_Y  16

#define DUMP_STITCHER 0

namespace XCam {

#if DUMP_STITCHER
static void
stitcher_dump_buf (const SmartPtr<VideoBuffer> buf, uint32_t idx, const char *prefix)
{
    XCAM_ASSERT (prefix);
    char name[256];
    snprintf (name, 256, "%s-%d", prefix, idx);
    dump_buf_perfix_path (buf, name);
}
#else
static void stitcher_dump_buf (const SmartPtr<VideoBuffer> buf, ...) {
    XCAM_UNUSED (buf);
}
#endif


namespace SoftSitcherPriv {

DECLARE_HANDLER_CALLBACK (CbGeoMap, SoftStitcher, dewarp_done);
DECLARE_HANDLER_CALLBACK (CbBlender, SoftStitcher, blender_done);
DECLARE_WORK_CALLBACK (CbCopyTask, SoftStitcher, copy_task_done);

struct BlenderParam
    : SoftBlender::BlenderParam
{
    SmartPtr<SoftStitcher::StitcherParam>  stitch_param;
    uint32_t idx;

    BlenderParam (
        uint32_t i,
        const SmartPtr<VideoBuffer> &in0,
        const SmartPtr<VideoBuffer> &in1,
        const SmartPtr<VideoBuffer> &out)
        : SoftBlender::BlenderParam (in0, in1, out)
        , idx (i)
    {}
};

typedef std::map<void*, SmartPtr<BlenderParam>> BlenderParams;
typedef std::map<void*, int32_t> BlendCopyTaskNums;

struct HandlerParam
    : ImageHandler::Parameters
{
    SmartPtr<SoftStitcher::StitcherParam>  stitch_param;
    uint32_t idx;

    HandlerParam (uint32_t i)
        : idx (i)
    {}
};

struct StitcherCopyArgs
    : XCamSoftTasks::CopyTask::Args
{
    uint32_t idx;

    StitcherCopyArgs (
        uint32_t i,
        const SmartPtr<ImageHandler::Parameters> &param)
        : XCamSoftTasks::CopyTask::Args (param)
        , idx (i)
    {}
};

struct Factor {
    float x, y;

    Factor () : x (1.0f), y (1.0f) {}
    void reset () {
        x = 1.0f;
        y = 1.0f;
    }
};

struct Overlap {
    SmartPtr<FeatureMatch>       matcher;
    SmartPtr<SoftBlender>        blender;
    BlenderParams                param_map;

    SmartPtr<BlenderParam> find_blender_param_in_map (
        const SmartPtr<SoftStitcher::StitcherParam> &key,
        const uint32_t idx);
};

struct FisheyeDewarp {
    SmartPtr<SoftGeoMapper>      dewarp;
    SmartPtr<BufferPool>         buf_pool;
    Factor                       left_match_factor, right_match_factor;

    bool set_dewarp_factor ();
    XCamReturn set_dewarp_geo_table (
        SmartPtr<SoftGeoMapper> mapper,
        const CameraInfo &cam_info,
        const Stitcher::RoundViewSlice &view_slice,
        const BowlDataConfig &bowl);
};

struct Copier {
    SmartPtr<XCamSoftTasks::CopyTask>    copy_task;
    Stitcher::CopyArea                   copy_area;

    XCamReturn start_copy_task (
        const SmartPtr<ImageHandler::Parameters> &param,
        const uint32_t idx, const SmartPtr<VideoBuffer> &buf);
};
typedef std::vector<Copier>    Copiers;

class StitcherImpl {
    friend class XCam::SoftStitcher;

public:
    StitcherImpl (SoftStitcher *handler)
        : _stitcher (handler)
    {}

    XCamReturn init_config (uint32_t count);

    bool remove_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param);
    int32_t dec_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param);

    XCamReturn start_dewarp_works (const SmartPtr<SoftStitcher::StitcherParam> &param);
    XCamReturn start_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param);
    XCamReturn start_overlap_tasks (
        const SmartPtr<SoftStitcher::StitcherParam> &param,
        const uint32_t idx, const SmartPtr<VideoBuffer> &buf);
    XCamReturn start_copy_tasks (
        const SmartPtr<SoftStitcher::StitcherParam> &param,
        const uint32_t idx, const SmartPtr<VideoBuffer> &buf);

    XCamReturn start_single_blender (const uint32_t idx, const SmartPtr<BlenderParam> &param);
    XCamReturn stop ();

    XCamReturn fisheye_dewarp_to_table ();
    XCamReturn feature_match (
        const SmartPtr<VideoBuffer> &left_buf,
        const SmartPtr<VideoBuffer> &right_buf,
        const uint32_t idx);

    bool get_and_reset_feature_match_factors (uint32_t idx, Factor &left, Factor &right);

private:
    XCamReturn init_fisheye (uint32_t idx);
    bool init_dewarp_factors (uint32_t idx);
    XCamReturn create_copier (Stitcher::CopyArea area);

private:
    FisheyeDewarp           _fisheye [XCAM_STITCH_MAX_CAMERAS];
    Overlap                 _overlaps [XCAM_STITCH_MAX_CAMERAS];
    Copiers                 _copiers;
    SmartPtr<BufferPool>    _dewarp_pool;

    Mutex                   _map_mutex;
    BlendCopyTaskNums       _task_counts;

    SoftStitcher           *_stitcher;
};

bool
StitcherImpl::init_dewarp_factors (uint32_t idx)
{
    XCAM_FAIL_RETURN (
        ERROR, _fisheye[idx].dewarp.ptr (), false,
        "FisheyeDewarp dewarp handler empty");

    Factor match_left_factor, match_right_factor;
    get_and_reset_feature_match_factors (idx, match_left_factor, match_right_factor);

    Factor unify_factor, last_left_factor, last_right_factor;
    _fisheye[idx].dewarp->get_factors (unify_factor.x, unify_factor.y);
    last_left_factor = last_right_factor = unify_factor;
    if (XCAM_DOUBLE_EQUAL_AROUND (unify_factor.x, 0.0f) ||
            XCAM_DOUBLE_EQUAL_AROUND (unify_factor.y, 0.0f)) { // not started.
        return true;
    }

    Factor cur_left, cur_right;
    cur_left.x = last_left_factor.x * match_left_factor.x;
    cur_left.y = last_left_factor.y * match_left_factor.y;
    cur_right.x = last_right_factor.x * match_right_factor.x;
    cur_right.y = last_right_factor.y * match_right_factor.y;

    unify_factor.x = (cur_left.x + cur_right.x) / 2.0f;
    unify_factor.y = (cur_left.y + cur_right.y) / 2.0f;
    _fisheye[idx].dewarp->set_factors (unify_factor.x, unify_factor.y);

    return true;
}

XCamReturn
FisheyeDewarp::set_dewarp_geo_table (
    SmartPtr<SoftGeoMapper> mapper,
    const CameraInfo &cam_info,
    const Stitcher::RoundViewSlice &view_slice,
    const BowlDataConfig &bowl)
{
    PolyFisheyeDewarp fd;
    fd.set_intrinsic_param (cam_info.calibration.intrinsic);
    fd.set_extrinsic_param (cam_info.calibration.extrinsic);

    uint32_t table_width, table_height;
    table_width = view_slice.width / MAP_FACTOR_X;
    table_width = XCAM_ALIGN_UP (table_width, 4);
    table_height = view_slice.height / MAP_FACTOR_Y;
    table_height = XCAM_ALIGN_UP (table_height, 2);
    SurViewFisheyeDewarp::MapTable map_table(table_width * table_height);
    fd.fisheye_dewarp (
        map_table, table_width, table_height,
        view_slice.width, view_slice.height, bowl);

    XCAM_FAIL_RETURN (
        ERROR, mapper->set_lookup_table (map_table.data (), table_width, table_height),
        XCAM_RETURN_ERROR_UNKNOWN, "set fisheye dewarp lookup table failed");
    return XCAM_RETURN_NO_ERROR;
}

bool
StitcherImpl::get_and_reset_feature_match_factors (uint32_t idx, Factor &left, Factor &right)
{
    uint32_t cam_num = _stitcher->get_camera_num ();
    XCAM_FAIL_RETURN (
        ERROR, idx < cam_num, false,
        "get dewarp factor failed, idx(%d) > camera_num(%d)", idx, cam_num);

    SmartLock locker (_map_mutex);
    left = _fisheye[idx].left_match_factor;
    right = _fisheye[idx].right_match_factor;

    _fisheye[idx].left_match_factor.reset ();
    _fisheye[idx].right_match_factor.reset ();
    return true;
}

XCamReturn
StitcherImpl::init_fisheye (uint32_t idx)
{
    FisheyeDewarp &fisheye = _fisheye[idx];
    SmartPtr<ImageHandler::Callback> dewarp_cb = new CbGeoMap (_stitcher);
    fisheye.dewarp = new SoftGeoMapper ("sitcher_remapper");
    XCAM_ASSERT (fisheye.dewarp.ptr ());
    fisheye.dewarp->set_callback (dewarp_cb);

    Stitcher::RoundViewSlice view_slice =
        _stitcher->get_round_view_slice (idx);

    VideoBufferInfo buf_info;
    buf_info.init (
        V4L2_PIX_FMT_NV12, view_slice.width, view_slice.height,
        XCAM_ALIGN_UP (view_slice.width, SOFT_STITCHER_ALIGNMENT_X),
        XCAM_ALIGN_UP (view_slice.height, SOFT_STITCHER_ALIGNMENT_Y));

    fisheye.buf_pool = new SoftVideoBufAllocator (buf_info);
    XCAM_ASSERT (fisheye.buf_pool.ptr ());
    XCAM_FAIL_RETURN (
        ERROR, fisheye.buf_pool->reserve (2), XCAM_RETURN_ERROR_MEM,
        "stitcher:%s reserve dewarp buffer pool(w:%d,h:%d) failed",
        XCAM_STR (_stitcher->get_name ()), buf_info.width, buf_info.height);
    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
StitcherImpl::create_copier (Stitcher::CopyArea area)
{
    XCAM_FAIL_RETURN (
        ERROR,
        area.in_idx != INVALID_INDEX &&
        area.in_area.width == area.out_area.width && area.in_area.height == area.out_area.height,
        XCAM_RETURN_ERROR_PARAM,
        "stitcher: copy area (idx:%d) is invalid", area.in_idx);

    SmartPtr<Worker::Callback> copy_cb = new CbCopyTask (_stitcher);
    XCAM_ASSERT (copy_cb.ptr ());

    Copier copier;
    copier.copy_task = new XCamSoftTasks::CopyTask (copy_cb);
    XCAM_ASSERT (copier.copy_task.ptr ());
    copier.copy_area = area;
    _copiers.push_back (copier);

    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
StitcherImpl::init_config (uint32_t count)
{
    XCamReturn ret = XCAM_RETURN_NO_ERROR;

    SmartPtr<ImageHandler::Callback> blender_cb = new CbBlender (_stitcher);
    for (uint32_t i = 0; i < count; ++i) {
        ret = init_fisheye (i);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "stitcher:%s init fisheye failed, idx:%d.", XCAM_STR (_stitcher->get_name ()), i);

#if ENABLE_FEATURE_MATCH
        _overlaps[i].matcher = new CVCapiFeatureMatch;

        CVFMConfig config;
        config.sitch_min_width = 136;
        config.min_corners = 4;
        config.offset_factor = 0.8f;
        config.delta_mean_offset = 120.0f;
        config.recur_offset_error = 8.0f;
        config.max_adjusted_offset = 24.0f;
        config.max_valid_offset_y = 20.0f;
#ifndef ANDROID
        config.max_track_error = 28.0f;
#else
        config.max_track_error = 3600.0f;
#endif
        _overlaps[i].matcher->set_config (config);
        _overlaps[i].matcher->set_fm_index (i);
#endif

        _overlaps[i].blender = create_soft_blender ().dynamic_cast_ptr<SoftBlender>();
        XCAM_ASSERT (_overlaps[i].blender.ptr ());
        _overlaps[i].blender->set_callback (blender_cb);
        _overlaps[i].param_map.clear ();
    }

    Stitcher::CopyAreaArray areas = _stitcher->get_copy_area ();
    uint32_t size = areas.size ();
    for (uint32_t i = 0; i < size; ++i) {
        XCAM_LOG_DEBUG ("soft-stitcher:copy area (idx:%d) input area(%d, %d, %d, %d) output area(%d, %d, %d, %d)",
                        areas[i].in_idx,
                        areas[i].in_area.pos_x, areas[i].in_area.pos_y, areas[i].in_area.width, areas[i].in_area.height,
                        areas[i].out_area.pos_x, areas[i].out_area.pos_y, areas[i].out_area.width, areas[i].out_area.height);

        XCAM_ASSERT (areas[i].in_idx < size);
        ret = create_copier (areas[i]);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher::%s init copier failed, idx:%d.", XCAM_STR (_stitcher->get_name ()), i);
    }

    return XCAM_RETURN_NO_ERROR;
}

bool
StitcherImpl::remove_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param)
{
    XCAM_ASSERT (param.ptr ());
    SmartLock locker (_map_mutex);
    BlendCopyTaskNums::iterator i = _task_counts.find (param.ptr ());
    if (i == _task_counts.end ())
        return false;

    _task_counts.erase (i);
    return true;
}

int32_t
StitcherImpl::dec_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param)
{
    XCAM_ASSERT (param.ptr ());
    SmartLock locker (_map_mutex);
    BlendCopyTaskNums::iterator i = _task_counts.find (param.ptr ());
    if (i == _task_counts.end ())
        return -1;

    int32_t &count = i->second;
    --count;
    if (count > 0)
        return count;

    XCAM_ASSERT (count == 0);
    _task_counts.erase (i);
    return 0;
}

XCamReturn
StitcherImpl::fisheye_dewarp_to_table ()
{
    uint32_t camera_num = _stitcher->get_camera_num ();
    for (uint32_t i = 0; i < camera_num; ++i) {
        CameraInfo cam_info;
        _stitcher->get_camera_info (i, cam_info);
        Stitcher::RoundViewSlice view_slice = _stitcher->get_round_view_slice (i);

        BowlDataConfig bowl = _stitcher->get_bowl_config ();
        bowl.angle_start = view_slice.hori_angle_start;
        bowl.angle_end = format_angle (view_slice.hori_angle_start + view_slice.hori_angle_range);

        uint32_t out_width, out_height;
        _stitcher->get_output_size (out_width, out_height);

        _fisheye[i].dewarp->set_output_size (view_slice.width, view_slice.height);
        if (bowl.angle_end < bowl.angle_start)
            bowl.angle_start -= 360.0f;
        XCAM_LOG_INFO (
            "soft-stitcher:%s camera(idx:%d) info (angle start:%.2f, range:%.2f), bowl info (angle start%.2f, end:%.2f)",
            XCAM_STR (_stitcher->get_name ()), i,
            view_slice.hori_angle_start, view_slice.hori_angle_range,
            bowl.angle_start, bowl.angle_end);
        XCamReturn ret = _fisheye[i].set_dewarp_geo_table (_fisheye[i].dewarp, cam_info, view_slice, bowl);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "stitcher:%s set dewarp geo table failed, idx:%d.", XCAM_STR (_stitcher->get_name ()), i);

    }

    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
StitcherImpl::start_dewarp_works (const SmartPtr<SoftStitcher::StitcherParam> &param)
{
    uint32_t camera_num = _stitcher->get_camera_num ();
    Factor cur_left, cur_right;

    for (uint32_t i = 0; i < camera_num; ++i) {
        SmartPtr<VideoBuffer> out_buf = _fisheye[i].buf_pool->get_buffer ();
        SmartPtr<HandlerParam> dewarp_params = new HandlerParam (i);
        dewarp_params->in_buf = param->in_bufs[i];
        dewarp_params->out_buf = out_buf;
        dewarp_params->stitch_param = param;

        init_dewarp_factors (i);
        XCamReturn ret = _fisheye[i].dewarp->execute_buffer (dewarp_params, false);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher:%s fisheye dewarp buffer failed", XCAM_STR (_stitcher->get_name ()));
    }
    return XCAM_RETURN_NO_ERROR;
}

SmartPtr<BlenderParam>
Overlap::find_blender_param_in_map (
    const SmartPtr<SoftStitcher::StitcherParam> &key,
    const uint32_t idx)
{
    SmartPtr<BlenderParam> param;
    BlenderParams::iterator i = param_map.find (key.ptr ());
    if (i == param_map.end ()) {
        param = new BlenderParam (idx, NULL, NULL, NULL);
        XCAM_ASSERT (param.ptr ());
        param->stitch_param = key;
        param_map.insert (std::make_pair ((void*)key.ptr (), param));
    } else {
        param = (*i).second;
    }

    return param;
}

XCamReturn
StitcherImpl::feature_match (
    const SmartPtr<VideoBuffer> &left_buf,
    const SmartPtr<VideoBuffer> &right_buf,
    const uint32_t idx)
{
    const Stitcher::ImageOverlapInfo overlap_info = _stitcher->get_overlap (idx);
    Rect left_ovlap = overlap_info.left;
    Rect right_ovlap = overlap_info.right;
    const VideoBufferInfo left_buf_info = left_buf->get_video_info ();

    left_ovlap.pos_y = left_ovlap.height / 5;
    left_ovlap.height = left_ovlap.height / 2;
    right_ovlap.pos_y = right_ovlap.height / 5;
    right_ovlap.height = right_ovlap.height / 2;

    _overlaps[idx].matcher->reset_offsets ();
    _overlaps[idx].matcher->optical_flow_feature_match (
        left_buf, right_buf, left_ovlap, right_ovlap, left_buf_info.width);
    float left_offsetx = _overlaps[idx].matcher->get_current_left_offset_x ();
    Factor left_factor, right_factor;

    uint32_t left_idx = idx;
    float center_x = (float) _stitcher->get_center (left_idx).slice_center_x;
    float feature_center_x = (float)left_ovlap.pos_x + (left_ovlap.width / 2.0f);
    float range = feature_center_x - center_x;
    XCAM_ASSERT (range > 1.0f);
    right_factor.x = (range + left_offsetx / 2.0f) / range;
    right_factor.y = 1.0;
    XCAM_ASSERT (right_factor.x > 0.0f && right_factor.x < 2.0f);

    uint32_t right_idx = (idx + 1) % _stitcher->get_camera_num ();
    center_x = (float) _stitcher->get_center (right_idx).slice_center_x;
    feature_center_x = (float)right_ovlap.pos_x + (right_ovlap.width / 2.0f);
    range = center_x - feature_center_x;
    XCAM_ASSERT (range > 1.0f);
    left_factor.x = (range + left_offsetx / 2.0f) / range;
    left_factor.y = 1.0;
    XCAM_ASSERT (left_factor.x > 0.0f && left_factor.x < 2.0f);

    {
        SmartLock locker (_map_mutex);
        _fisheye[left_idx].right_match_factor = right_factor;
        _fisheye[right_idx].left_match_factor = left_factor;
    }

    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
StitcherImpl::start_single_blender (
    const uint32_t idx,
    const SmartPtr<BlenderParam> &param)
{
    SmartPtr<SoftBlender> blender = _overlaps[idx].blender;
    const Stitcher::ImageOverlapInfo &overlap_info = _stitcher->get_overlap (idx);
    uint32_t out_width, out_height;
    _stitcher->get_output_size (out_width, out_height);

    blender->set_output_size (out_width, out_height);
    blender->set_merge_window (overlap_info.out_area);
    blender->set_input_valid_area (overlap_info.left, 0);
    blender->set_input_valid_area (overlap_info.right, 1);
    blender->set_input_merge_area (overlap_info.left, 0);
    blender->set_input_merge_area (overlap_info.right, 1);
    return blender->execute_buffer (param, false);
}

XCamReturn
StitcherImpl::start_overlap_tasks (
    const SmartPtr<SoftStitcher::StitcherParam> &param,
    const uint32_t idx, const SmartPtr<VideoBuffer> &buf)
{
    SmartPtr<BlenderParam> cur_param, prev_param;
    const uint32_t camera_num = _stitcher->get_camera_num ();
    uint32_t pre_idx = (idx + camera_num - 1) % camera_num;
    XCamReturn ret = XCAM_RETURN_NO_ERROR;
    {
        SmartPtr<BlenderParam> param_b;

        SmartLock locker (_map_mutex);
        param_b = _overlaps[idx].find_blender_param_in_map (param, idx);
        param_b->in_buf = buf;
        if (param_b->in_buf.ptr () && param_b->in1_buf.ptr ()) {
            cur_param = param_b;
            _overlaps[idx].param_map.erase (param.ptr ());
        }

        param_b = _overlaps[pre_idx].find_blender_param_in_map (param, pre_idx);
        param_b->in1_buf = buf;
        if (param_b->in_buf.ptr () && param_b->in1_buf.ptr ()) {
            prev_param = param_b;
            _overlaps[pre_idx].param_map.erase (param.ptr ());
        }
    }

    if (cur_param.ptr ()) {
        cur_param->out_buf = param->out_buf;
        ret = start_single_blender (idx, cur_param);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher:%s blend overlap idx:%d failed", XCAM_STR (_stitcher->get_name ()), idx);
    }

    if (prev_param.ptr ()) {
        prev_param->out_buf = param->out_buf;
        ret = start_single_blender (pre_idx, prev_param);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher:%s blend overlap idx:%d failed", XCAM_STR (_stitcher->get_name ()), pre_idx);
    }

#if ENABLE_FEATURE_MATCH
    //start feature match
    if (cur_param.ptr ()) {
        ret = feature_match (cur_param->in_buf, cur_param->in1_buf, idx);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher:%s feature-match overlap idx:%d failed", XCAM_STR (_stitcher->get_name ()), idx);
    }

    if (prev_param.ptr ()) {
        ret = feature_match (prev_param->in_buf, prev_param->in1_buf, pre_idx);
        XCAM_FAIL_RETURN (
            ERROR, xcam_ret_is_ok (ret), ret,
            "soft-stitcher:%s feature-match overlap idx:%d failed", XCAM_STR (_stitcher->get_name ()), pre_idx);
    }
#endif
    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
Copier::start_copy_task (
    const SmartPtr<ImageHandler::Parameters> &param,
    const uint32_t idx, const SmartPtr<VideoBuffer> &buf)
{
    XCAM_ASSERT (copy_task.ptr ());

    SmartPtr<VideoBuffer> in_buf = buf, out_buf = param->out_buf;
    const VideoBufferInfo &in_info = in_buf->get_video_info ();
    const VideoBufferInfo &out_info = out_buf->get_video_info ();

    SmartPtr<StitcherCopyArgs> args = new StitcherCopyArgs (idx, param);
    args->in_luma = new UcharImage (
        in_buf, copy_area.in_area.width, copy_area.in_area.height, in_info.strides[0],
        in_info.offsets[0] + copy_area.in_area.pos_x + copy_area.in_area.pos_y * in_info.strides[0]);
    args->in_uv = new Uchar2Image (
        in_buf, copy_area.in_area.width / 2, copy_area.in_area.height / 2, in_info.strides[0],
        in_info.offsets[1] + copy_area.in_area.pos_x + copy_area.in_area.pos_y / 2 * in_info.strides[1]);

    args->out_luma = new UcharImage (
        out_buf, copy_area.out_area.width, copy_area.out_area.height, out_info.strides[0],
        out_info.offsets[0] + copy_area.out_area.pos_x + copy_area.out_area.pos_y * out_info.strides[0]);
    args->out_uv = new Uchar2Image (
        out_buf, copy_area.out_area.width / 2, copy_area.out_area.height / 2, out_info.strides[0],
        out_info.offsets[1] + copy_area.out_area.pos_x + copy_area.out_area.pos_y / 2 * out_info.strides[1]);

    uint32_t thread_x = 1, thread_y = 4;
    WorkSize global_size (1, xcam_ceil (copy_area.in_area.height, 2) / 2);
    WorkSize local_size (
        xcam_ceil (global_size.value[0], thread_x) / thread_x,
        xcam_ceil (global_size.value[1], thread_y) / thread_y);

    copy_task->set_local_size (local_size);
    copy_task->set_global_size (global_size);

    return copy_task->work (args);
}

XCamReturn
StitcherImpl::start_copy_tasks (
    const SmartPtr<SoftStitcher::StitcherParam> &param,
    const uint32_t idx, const SmartPtr<VideoBuffer> &buf)
{
    uint32_t size = _stitcher->get_copy_area ().size ();
    for (uint32_t i = 0; i < size; ++i) {
        if(_copiers[i].copy_area.in_idx == idx) {
            XCamReturn ret = _copiers[i].start_copy_task (param, idx, buf);
            XCAM_FAIL_RETURN (
                ERROR, xcam_ret_is_ok (ret), ret,
                "soft-stitcher:%s start copy task failed, idx:%d", XCAM_STR (_stitcher->get_name ()), idx);
        }
    }

    return XCAM_RETURN_NO_ERROR;
}

XCamReturn
StitcherImpl::stop ()
{
    uint32_t cam_num = _stitcher->get_camera_num ();
    for (uint32_t i = 0; i < cam_num; ++i) {
        if (_fisheye[i].dewarp.ptr ()) {
            _fisheye[i].dewarp->terminate ();
            _fisheye[i].dewarp.release ();
        }
        if (_fisheye[i].buf_pool.ptr ()) {
            _fisheye[i].buf_pool->stop ();
        }

        if (_overlaps[i].blender.ptr ()) {
            _overlaps[i].blender->terminate ();
            _overlaps[i].blender.release ();
        }
    }

    for (Copiers::iterator i_copy = _copiers.begin (); i_copy != _copiers.end (); ++i_copy) {
        Copier &copy = *i_copy;
        if (copy.copy_task.ptr ()) {
            copy.copy_task->stop ();
            copy.copy_task.release ();
        }
    }

    if (_dewarp_pool.ptr ()) {
        _dewarp_pool->stop ();
    }
    return XCAM_RETURN_NO_ERROR;
}

};

SoftStitcher::SoftStitcher (const char *name)
    : SoftHandler (name)
    , Stitcher (SOFT_STITCHER_ALIGNMENT_X, SOFT_STITCHER_ALIGNMENT_Y)
{
    _impl = new SoftSitcherPriv::StitcherImpl (this);
    XCAM_ASSERT (_impl.ptr ());
#if ENABLE_FEATURE_MATCH
#ifndef ANDROID
    cv::ocl::setUseOpenCL (false);
#endif
#endif
}

SoftStitcher::~SoftStitcher ()
{
}

XCamReturn
SoftStitcher::stitch_buffers (const VideoBufferList &in_bufs, SmartPtr<VideoBuffer> &out_buf)
{
    XCAM_FAIL_RETURN (
        ERROR, !in_bufs.empty (), XCAM_RETURN_ERROR_PARAM,
        "soft-stitcher:%s stitch buffer failed, in_bufs is empty", XCAM_STR (get_name ()));

    SmartPtr<StitcherParam> param = new StitcherParam;
    param->out_buf = out_buf;
    uint32_t count = 0;
    for (VideoBufferList::const_iterator i = in_bufs.begin(); i != in_bufs.end (); ++i) {
        SmartPtr<VideoBuffer> buf = *i;
        XCAM_ASSERT (buf.ptr ());
        param->in_bufs[count++] = buf;
    }
    param->in_buf_num = count;
    XCamReturn ret = execute_buffer (param, true);
    if (!out_buf.ptr () && xcam_ret_is_ok (ret)) {
        out_buf = param->out_buf;
    }
    return ret;
}

XCamReturn
SoftStitcher::terminate ()
{
    _impl->stop ();
    return SoftHandler::terminate ();
}

XCamReturn
SoftStitcher::start_task_count (const SmartPtr<SoftStitcher::StitcherParam> &param)
{
    XCAM_ASSERT (param.ptr ());
    XCAM_ASSERT (_impl.ptr ());

    SmartLock locker (_impl->_map_mutex);

    XCAM_FAIL_RETURN (
        ERROR, check_work_continue (param, XCAM_RETURN_NO_ERROR), XCAM_RETURN_ERROR_PARAM,
        "soft-stitcher:%s start task count failed in work check", XCAM_STR (get_name ()));

    if (_impl->_task_counts.find (param.ptr ()) != _impl->_task_counts.end ()) {
        XCAM_LOG_ERROR ("tasks already started, this should never happen.");
        return XCAM_RETURN_ERROR_UNKNOWN;
    }

    int32_t count = get_camera_num ();
    count += get_copy_area ().size ();

    XCAM_LOG_DEBUG ("stitcher :%s start task count :%d", XCAM_STR(get_name ()), count);
    _impl->_task_counts.insert (std::make_pair((void*)param.ptr(), count));
    return XCAM_RETURN_NO_ERROR;
}

void
SoftStitcher::dewarp_done (
    const SmartPtr<ImageHandler> &handler,
    const SmartPtr<ImageHandler::Parameters> &base,
    const XCamReturn error)
{
    SmartPtr<SoftSitcherPriv::HandlerParam> dewarp_param = base.dynamic_cast_ptr<SoftSitcherPriv::HandlerParam> ();
    XCAM_ASSERT (dewarp_param.ptr ());
    SmartPtr<SoftStitcher::StitcherParam> param = dewarp_param->stitch_param;
    XCAM_ASSERT (param.ptr ());
    XCAM_UNUSED (handler);

    if (!check_work_continue (param, error))
        return;

    XCAM_LOG_INFO ("soft-stitcher:%s camera(idx:%d) dewarp done", XCAM_STR (get_name ()), dewarp_param->idx);
    stitcher_dump_buf (dewarp_param->out_buf, dewarp_param->idx, "stitcher-dewarp");

    //start both blender and feature match
    XCamReturn ret = _impl->start_overlap_tasks (param, dewarp_param->idx, dewarp_param->out_buf);
    if (!xcam_ret_is_ok (ret)) {
        work_broken (param, ret);
    }

    ret = _impl->start_copy_tasks (param, dewarp_param->idx, dewarp_param->out_buf);
    if (!xcam_ret_is_ok (ret)) {
        work_broken (param, ret);
    }
}

void
SoftStitcher::blender_done (
    const SmartPtr<ImageHandler> &handler,
    const SmartPtr<ImageHandler::Parameters> &base,
    const XCamReturn error)
{
    SmartPtr<SoftSitcherPriv::BlenderParam> blender_param = base.dynamic_cast_ptr<SoftSitcherPriv::BlenderParam> ();
    XCAM_ASSERT (blender_param.ptr ());
    SmartPtr<SoftStitcher::StitcherParam> param = blender_param->stitch_param;
    XCAM_ASSERT (param.ptr ());
    XCAM_UNUSED (handler);

    if (!check_work_continue (param, error)) {
        _impl->remove_task_count (param);
        return;
    }

    stitcher_dump_buf (blender_param->out_buf, blender_param->idx, "stitcher-blend");
    XCAM_LOG_INFO ("blender:(%s) overlap:%d done", XCAM_STR (handler->get_name ()), blender_param->idx);

    if (_impl->dec_task_count (param) == 0) {
        work_well_done (param, error);
    }
}

void
SoftStitcher::copy_task_done (
    const SmartPtr<Worker> &worker,
    const SmartPtr<Worker::Arguments> &base,
    const XCamReturn error)
{
    XCAM_UNUSED (worker);
    XCAM_ASSERT (worker.ptr ());
    SmartPtr<SoftSitcherPriv::StitcherCopyArgs> args = base.dynamic_cast_ptr<SoftSitcherPriv::StitcherCopyArgs> ();
    XCAM_ASSERT (args.ptr ());
    const SmartPtr<SoftStitcher::StitcherParam> param =
        args->get_param ().dynamic_cast_ptr<SoftStitcher::StitcherParam> ();
    XCAM_ASSERT (param.ptr ());

    if (!check_work_continue (param, error)) {
        _impl->remove_task_count (param);
        return;
    }
    XCAM_LOG_INFO ("soft-stitcher:%s camera(idx:%d) copy done", XCAM_STR (get_name ()), args->idx);

    if (_impl->dec_task_count (param) == 0) {
        work_well_done (param, error);
    }
}

XCamReturn
SoftStitcher::configure_resource (const SmartPtr<Parameters> &param)
{
    XCAM_UNUSED (param);
    XCAM_ASSERT (_impl.ptr ());

    XCamReturn ret = estimate_round_slices ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s estimate round view slices failed", XCAM_STR (get_name ()));

    ret = estimate_coarse_crops ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s estimate coarse crops failed", XCAM_STR (get_name ()));

    ret = mark_centers ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s mark centers failed", XCAM_STR (get_name ()));

    ret = estimate_overlap ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s estimake coarse overlap failed", XCAM_STR (get_name ()));

    ret = update_copy_areas ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s update copy areas failed", XCAM_STR (get_name ()));

    uint32_t camera_count = get_camera_num ();
    ret = _impl->init_config (camera_count);
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s initialize private config failed", XCAM_STR (get_name ()));

    ret = _impl->fisheye_dewarp_to_table ();
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), ret,
        "soft-stitcher:%s fisheye_dewarp_to_table failed", XCAM_STR (get_name ()));

    VideoBufferInfo out_info;
    uint32_t out_width, out_height;
    get_output_size (out_width, out_height);
    XCAM_FAIL_RETURN (
        ERROR, out_width && out_height, XCAM_RETURN_ERROR_PARAM,
        "soft-stitcher:%s output size was not set", XCAM_STR(get_name ()));

    out_info.init (
        V4L2_PIX_FMT_NV12, out_width, out_height,
        XCAM_ALIGN_UP (out_width, SOFT_STITCHER_ALIGNMENT_X),
        XCAM_ALIGN_UP (out_height, SOFT_STITCHER_ALIGNMENT_Y));
    set_out_video_info (out_info);

    return ret;
}

XCamReturn
SoftStitcher::start_work (const SmartPtr<Parameters> &base)
{
    SmartPtr<StitcherParam> param = base.dynamic_cast_ptr<StitcherParam> ();

    XCAM_FAIL_RETURN (
        ERROR, param.ptr () && param->in_buf_num > 0 && param->in_bufs[0].ptr (), XCAM_RETURN_ERROR_PARAM,
        "soft_stitcher:%s start_work failed, params(in_buf_num) in_bufs are set",
        XCAM_STR (get_name ()));

    XCamReturn ret = start_task_count (param);
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), XCAM_RETURN_ERROR_PARAM,
        "soft_stitcher:%s start blender count failed", XCAM_STR (get_name ()));

    ret = _impl->start_dewarp_works (param);
    XCAM_FAIL_RETURN (
        ERROR, xcam_ret_is_ok (ret), XCAM_RETURN_ERROR_PARAM,
        "soft_stitcher:%s start dewarp works failed", XCAM_STR (get_name ()));

    //for (uint32_t i = 0; i < param->in_buf_num; ++i) {
    //    param->in_bufs[i].release ();
    //}

    return ret;
}

SmartPtr<Stitcher>
Stitcher::create_soft_stitcher ()
{
    return new SoftStitcher;
}

}