SkPaint Reference
===
---
class SkPaint {
SkPaint();
SkPaint(const SkPaint& paint);
SkPaint(SkPaint&& paint);
~SkPaint();
SkPaint& operator=(const SkPaint& paint);
SkPaint& operator=(SkPaint&& paint);
friend bool operator==(const SkPaint& a, const SkPaint& b);
friend bool operator!=(const SkPaint& a, const SkPaint& b);
uint32_t getHash() const;
void reset();
void setHinting(SkFontHinting hintingLevel);
SkFontHinting getHinting() const;
enum Flags {
kAntiAlias_Flag = 0x01,
kDither_Flag = 0x04,
kFakeBoldText_Flag = 0x20,
kLinearText_Flag = 0x40,
kSubpixelText_Flag = 0x80,
kLCDRenderText_Flag = 0x200,
kEmbeddedBitmapText_Flag = 0x400,
kAutoHinting_Flag = 0x800,
kAllFlags = 0xFFFF,
};
uint32_t getFlags() const;
void setFlags(uint32_t flags);
bool isAntiAlias() const;
void setAntiAlias(bool aa);
bool isDither() const;
void setDither(bool dither);
bool isLinearText() const;
void setLinearText(bool linearText);
bool isSubpixelText() const;
void setSubpixelText(bool subpixelText);
bool isLCDRenderText() const;
void setLCDRenderText(bool lcdText);
bool isEmbeddedBitmapText() const;
void setEmbeddedBitmapText(bool useEmbeddedBitmapText);
bool isAutohinted() const;
void setAutohinted(bool useAutohinter);
bool isFakeBoldText() const;
void setFakeBoldText(bool fakeBoldText);
SkFilterQuality getFilterQuality() const;
void setFilterQuality(SkFilterQuality quality);
enum Style : uint8_t {
kFill_Style,
kStroke_Style,
kStrokeAndFill_Style,
};
static constexpr int kStyleCount = kStrokeAndFill_Style + 1
Style getStyle() const;
void setStyle(Style style);
SkColor getColor() const;
SkColor4f getColor4f() const;
void setColor(SkColor color);
void setColor4f(const SkColor4f& color, SkColorSpace* colorSpace);
uint8_t getAlpha() const;
void setAlpha(U8CPU a);
void setARGB(U8CPU a, U8CPU r, U8CPU g, U8CPU b);
SkScalar getStrokeWidth() const;
void setStrokeWidth(SkScalar width);
SkScalar getStrokeMiter() const;
void setStrokeMiter(SkScalar miter);
enum Cap {
kButt_Cap,
kRound_Cap,
kSquare_Cap,
kLast_Cap = kSquare_Cap,
kDefault_Cap = kButt_Cap,
};
static constexpr int kCapCount = kLast_Cap + 1
enum Join : uint8_t {
kMiter_Join,
kRound_Join,
kBevel_Join,
kLast_Join = kBevel_Join,
kDefault_Join = kMiter_Join,
};
static constexpr int kJoinCount = kLast_Join + 1
Cap getStrokeCap() const;
void setStrokeCap(Cap cap);
Join getStrokeJoin() const;
void setStrokeJoin(Join join);
bool getFillPath(const SkPath& src, SkPath* dst, const SkRect* cullRect,
SkScalar resScale = 1) const;
bool getFillPath(const SkPath& src, SkPath* dst) const;
SkShader* getShader() const;
sk_sp<SkShader> refShader() const;
void setShader(sk_sp<SkShader> shader);
SkColorFilter* getColorFilter() const;
sk_sp<SkColorFilter> refColorFilter() const;
void setColorFilter(sk_sp<SkColorFilter> colorFilter);
SkBlendMode getBlendMode() const;
bool isSrcOver() const;
void setBlendMode(SkBlendMode mode);
SkPathEffect* getPathEffect() const;
sk_sp<SkPathEffect> refPathEffect() const;
void setPathEffect(sk_sp<SkPathEffect> pathEffect);
SkMaskFilter* getMaskFilter() const;
sk_sp<SkMaskFilter> refMaskFilter() const;
void setMaskFilter(sk_sp<SkMaskFilter> maskFilter);
SkTypeface* getTypeface() const;
sk_sp<SkTypeface> refTypeface() const;
void setTypeface(sk_sp<SkTypeface> typeface);
SkImageFilter* getImageFilter() const;
sk_sp<SkImageFilter> refImageFilter() const;
void setImageFilter(sk_sp<SkImageFilter> imageFilter);
SkDrawLooper* getDrawLooper() const;
sk_sp<SkDrawLooper> refDrawLooper() const;
void setDrawLooper(sk_sp<SkDrawLooper> drawLooper);
SkScalar getTextSize() const;
void setTextSize(SkScalar textSize);
SkScalar getTextScaleX() const;
void setTextScaleX(SkScalar scaleX);
SkScalar getTextSkewX() const;
void setTextSkewX(SkScalar skewX);
SkTextEncoding getTextEncoding() const;
void setTextEncoding(SkTextEncoding encoding);
typedef SkFontMetrics FontMetrics;
SkScalar getFontMetrics(SkFontMetrics* metrics) const;
SkScalar getFontSpacing() const;
int textToGlyphs(const void* text, size_t byteLength,
SkGlyphID glyphs[]) const;
bool containsText(const void* text, size_t byteLength) const;
void glyphsToUnichars(const SkGlyphID glyphs[], int count, SkUnichar text[]) const;
int countText(const void* text, size_t byteLength) const;
SkScalar measureText(const void* text, size_t length, SkRect* bounds) const;
SkScalar measureText(const void* text, size_t length) const;
int getTextWidths(const void* text, size_t byteLength, SkScalar widths[],
SkRect bounds[] = nullptr) const;
void getTextPath(const void* text, size_t length, SkScalar x, SkScalar y,
SkPath* path) const;
void getPosTextPath(const void* text, size_t length,
const SkPoint pos[], SkPath* path) const;
bool nothingToDraw() const;
};
Paint controls options applied when drawing and measuring. Paint collects all
options outside of the Canvas_Clip and Canvas_Matrix.
Various options apply to text, strokes and fills, and images.
Some options may not be implemented on all platforms; in these cases, setting
the option has no effect. Some options are conveniences that duplicate Canvas
functionality; for instance, text size is identical to matrix scale.
Paint options are rarely exclusive; each option modifies a stage of the drawing
pipeline and multiple pipeline stages may be affected by a single Paint.
Paint collects effects and filters that describe single-pass and multiple-pass
algorithms that alter the drawing geometry, color, and transparency. For instance,
Paint does not directly implement dashing or blur, but contains the objects that do so.
The objects contained by Paint are opaque, and cannot be edited outside of the Paint
to affect it. The implementation is free to defer computations associated with the
Paint, or ignore them altogether. For instance, some GPU implementations draw all
Path geometries with Anti_Aliasing, regardless of how SkPaint::kAntiAlias_Flag
is set in Paint.
Paint describes a single color, a single font, a single image quality, and so on.
Multiple colors are drawn either by using multiple paints or with objects like
Shader attached to Paint.
---
SkPaint()
Constructs Paint with default values.
| attribute | default value |
| --- | --- |
| Anti_Alias | false |
| Blend_Mode | SkBlendMode::kSrcOver |
| Color | SK_ColorBLACK |
| Color_Alpha | 255 |
| Color_Filter | nullptr |
| Dither | false |
| Draw_Looper | nullptr |
| Filter_Quality | kNone_SkFilterQuality |
| Font_Force_Hinting | false |
| Font_Embedded_Bitmaps | false |
| Font_Embolden | false |
| Font_Hinting | SkFontHinting::kNormal |
| Font_Hinting_Spacing | false |
| Font_Anti_Alias | false |
| Font_Linear | false |
| Font_Scale_X | 1 |
| Font_Size | 12 |
| Font_Skew_X | 0 |
| Font_Subpixel | false |
| Image_Filter | nullptr |
| Miter_Limit | 4 |
| Mask_Filter | nullptr |
| Path_Effect | nullptr |
| Shader | nullptr |
| Style | kFill_Style |
| Text_Encoding | kUTF8_SkTextEncoding |
| Typeface | nullptr |
| Stroke_Cap | kButt_Cap |
| Stroke_Join | kMiter_Join |
| Stroke_Width | 0 |
The flags, text size, hinting, and miter limit may be overridden at compile time by defining
paint default values. The overrides may be included in "SkUserConfig.h" or predefined by the
build system.
### Return Value
default initialized Paint
### Example
---
SkPaint(const SkPaint& paint)
Makes a shallow copy of SkPaint. SkTypeface, SkPathEffect, SkShader,
SkMaskFilter, SkColorFilter, SkDrawLooper, and SkImageFilter are shared
between the original paint and the copy. Objects containing SkRefCnt increment
their references by one.
The referenced objects SkPathEffect, SkShader, SkMaskFilter, SkColorFilter,
SkDrawLooper, and SkImageFilter cannot be modified after they are created.
This prevents objects with SkRefCnt from being modified once SkPaint refers to them.
### Parameters
### Return Value
shallow copy of paint
### Example
#### Example Output
~~~~
SK_ColorRED == paint1.getColor()
SK_ColorBLUE == paint2.getColor()
~~~~
---
SkPaint(SkPaint&& paint)
Implements a move constructor to avoid increasing the reference counts
of objects referenced by the paint.
After the call, paint is undefined, and can be safely destructed.
### Parameters
### Return Value
content of paint
### Example
#### Example Output
~~~~
path effect unique: true
~~~~
---
void reset()
Sets all SkPaint contents to their initial values. This is equivalent to replacing
SkPaint with the result of SkPaint().
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
---
~SkPaint()
Decreases SkPaint SkRefCnt of owned objects: SkTypeface, SkPathEffect, SkShader,
SkMaskFilter, SkColorFilter, SkDrawLooper, and SkImageFilter. If the
objects containing SkRefCnt go to zero, they are deleted.
---
SkPaint& operator=(const SkPaint& paint)
Makes a shallow copy of SkPaint. SkTypeface, SkPathEffect, SkShader,
SkMaskFilter, SkColorFilter, SkDrawLooper, and SkImageFilter are shared
between the original paint and the copy. Objects containing SkRefCnt in the
prior destination are decreased by one, and the referenced objects are deleted if the
resulting count is zero. Objects containing SkRefCnt in the parameter paint
are increased by one. paint is unmodified.
### Parameters
### Return Value
content of paint
### Example
#### Example Output
~~~~
SK_ColorRED == paint1.getColor()
SK_ColorRED == paint2.getColor()
~~~~
---
SkPaint& operator=(SkPaint&& paint)
Moves the paint to avoid increasing the reference counts
of objects referenced by the paint parameter. Objects containing SkRefCnt in the
prior destination are decreased by one; those objects are deleted if the resulting count
is zero.
After the call, paint is undefined, and can be safely destructed.
### Parameters
### Return Value
content of paint
### Example
#### Example Output
~~~~
SK_ColorRED == paint2.getColor()
~~~~
---
bool operator==(const SkPaint& a, const SkPaint& b)
Compares a and b, and returns true if a and b are equivalent. May return false
if SkTypeface, SkPathEffect, SkShader, SkMaskFilter, SkColorFilter,
SkDrawLooper, or SkImageFilter have identical contents but different pointers.
### Parameters
### Return Value
true if SkPaint pair are equivalent
### Example
#### Example Output
~~~~
paint1 == paint2
paint1 != paint2
~~~~
### See Also
operator!=(const SkPaint& a, const SkPaint& b)
---
bool operator!=(const SkPaint& a, const SkPaint& b)
Compares a and b, and returns true if a and b are not equivalent. May return true
if SkTypeface, SkPathEffect, SkShader, SkMaskFilter, SkColorFilter,
SkDrawLooper, or SkImageFilter have identical contents but different pointers.
### Parameters
### Return Value
true if SkPaint pair are not equivalent
### Example
#### Example Output
~~~~
paint1 == paint2
paint1 == paint2
~~~~
### See Also
operator==(const SkPaint& a, const SkPaint& b)
---
uint32_t getHash()const
Returns a hash generated from SkPaint values and pointers.
Identical hashes guarantee that the paints are
equivalent, but differing hashes do not guarantee that the paints have differing
contents.
If operator==(const SkPaint& a, const SkPaint& b) returns true for two paints,
their hashes are also equal.
The hash returned is platform and implementation specific.
### Return Value
a shallow hash
### Example
#### Example Output
~~~~
paint1 == paint2
paint1.getHash() == paint2.getHash()
~~~~
---
void setHinting(SkFontHinting hintingLevel)
Sets level of glyph outline adjustment.
Does not check for valid values of hintingLevel.
### Parameters
SkFontHinting::kNormal, SkFontHinting::kFull
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
---
SkFontHinting getHinting()const
Returns level of glyph outline adjustment.
### Return Value
one of: SkFontHinting::kNone, SkFontHinting::kSlight, SkFontHinting::kNormal,
SkFontHinting::kFull
### Example
#### Example Output
~~~~
SkFontHinting::kNormal == paint.getHinting()
~~~~
### Constants
---
uint32_t getFlags()const
Returns paint settings described by SkPaint::Flags. Each setting uses one
bit, and can be tested with SkPaint::Flags members.
### Return Value
zero, one, or more bits described by SkPaint::Flags
### Example
#### Example Output
~~~~
(SkPaint::kAntiAlias_Flag & paint.getFlags()) != 0
~~~~
---
void setFlags(uint32_t flags)
Replaces SkPaint::Flags with flags, the union of the SkPaint::Flags members.
All SkPaint::Flags members may be cleared, or one or more may be set.
### Parameters
### Example
#### Example Output
~~~~
paint.isAntiAlias()
paint.isDither()
~~~~
---
Anti_Alias drawing approximates partial pixel coverage with transparency.
If kAntiAlias_Flag is clear, pixel centers contained by the shape edge are drawn opaque.
If kAntiAlias_Flag is set, pixels are drawn with Color_Alpha equal to their coverage.
The rule for Aliased pixels is inconsistent across platforms. A shape edge
passing through the pixel center may, but is not required to, draw the pixel.
Raster_Engine draws Aliased pixels whose centers are on or to the right of the start of an
active Path edge, and whose center is to the left of the end of the active Path edge.
A platform may only support Anti_Aliased drawing. Some GPU-backed platforms use
Supersampling to Anti_Alias all drawing, and have no mechanism to selectively
Alias.
The amount of coverage computed for Anti_Aliased pixels also varies across platforms.
Anti_Alias is disabled by default.
Anti_Alias can be enabled by default by setting SkPaintDefaults_Flags to kAntiAlias_Flag
at compile time.
### Example
A red
line is drawn with transparency on the edges to make it look smoother.
A blue
line draws only where the
pixel centers are contained.
The
lines are drawn into
Bitmap, then drawn magnified to make the
Aliasing easier to see.
---
bool isAntiAlias()const
Returns true if pixels on the active edges of SkPath may be drawn with partial transparency.
Equivalent to getFlags() masked with kAntiAlias_Flag.
### Return Value
kAntiAlias_Flag state
### Example
#### Example Output
~~~~
paint.isAntiAlias() == !!(paint.getFlags() & SkPaint::kAntiAlias_Flag)
paint.isAntiAlias() == !!(paint.getFlags() & SkPaint::kAntiAlias_Flag)
~~~~
---
void setAntiAlias(bool aa)
Requests, but does not require, that edge pixels draw opaque or with
partial transparency.
Sets kAntiAlias_Flag if aa is true.
Clears kAntiAlias_Flag if aa is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
---
Dither increases fidelity by adjusting the color of adjacent pixels.
This can help to smooth color transitions and reducing banding in gradients.
Dithering lessens visible banding from kRGB_565_SkColorType
and kRGBA_8888_SkColorType gradients,
and improves rendering into a kRGB_565_SkColorType Surface.
Dithering is always enabled for linear gradients drawing into
kRGB_565_SkColorType Surface and kRGBA_8888_SkColorType Surface.
Dither cannot be enabled for kAlpha_8_SkColorType Surface and
kRGBA_F16_SkColorType Surface.
Dither is disabled by default.
Dither can be enabled by default by setting SkPaintDefaults_Flags to kDither_Flag
at compile time.
Some platform implementations may ignore dithering. Set SK_IGNORE_GPU_DITHER
to ignore Dither on GPU_Surface.
### Example
Dithering in the bottom half more closely approximates the requested
color by
alternating nearby colors from
pixel to
pixel.
### Example
Dithering introduces subtle adjustments to
color to smooth gradients.
Drawing the gradient repeatedly with
SkBlendMode::
kPlus exaggerates the
dither, making it easier to see.
### See Also
Gradient kRGB_565_SkColorType
---
bool isDither()const
Returns true if color error may be distributed to smooth color transition.
Equivalent to getFlags() masked with kDither_Flag.
### Return Value
kDither_Flag state
### Example
#### Example Output
~~~~
paint.isDither() == !!(paint.getFlags() & SkPaint::kDither_Flag)
paint.isDither() == !!(paint.getFlags() & SkPaint::kDither_Flag)
~~~~
---
void setDither(bool dither)
Requests, but does not require, to distribute color error.
Sets kDither_Flag if dither is true.
Clears kDither_Flag if dither is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
### See Also
kRGB_565_SkColorType
---
Font_Anti_Alias and Font_Subpixel increase the precision of glyph position.
When set, Flags kLCDRenderText_Flag takes advantage of the organization of RGB stripes that
create a color, and relies
on the small size of the stripe and visual perception to make the color fringing imperceptible.
Font_Anti_Alias can be enabled on devices that orient stripes horizontally or vertically, and that order
the color components as RGB or BGR.
Flags kSubpixelText_Flag uses the pixel transparency to represent a fractional offset.
As the opaqueness
of the color increases, the edge of the glyph appears to move towards the outside of the pixel.
Either or both techniques can be enabled.
kLCDRenderText_Flag and kSubpixelText_Flag are clear by default.
Font_Anti_Alias or Font_Subpixel can be enabled by default by setting SkPaintDefaults_Flags to
kLCDRenderText_Flag or kSubpixelText_Flag (or both) at compile time.
### Example
Font_Linear selects whether text is rendered as a Glyph or as a Path.
If Font_Linear is set, it has the same effect as setting Hinting to SkFontHinting::kNormal.
If Font_Linear is clear, it is the same as setting Hinting to SkFontHinting::kNone.
---
bool isLinearText()const
Returns true if text is converted to SkPath before drawing and measuring.
Equivalent to getFlags() masked with kLinearText_Flag.
### Return Value
kLinearText_Flag state
### Example
### See Also
setLinearText Hinting
---
void setLinearText(bool linearText)
Requests, but does not require, that glyphs are converted to SkPath
before drawing and measuring.
By default, kLinearText_Flag is clear.
Sets kLinearText_Flag if linearText is true.
Clears kLinearText_Flag if linearText is false.
### Parameters
### Example
### See Also
isLinearText Hinting
Flags kSubpixelText_Flag uses the pixel transparency to represent a fractional offset.
As the opaqueness
of the color increases, the edge of the glyph appears to move towards the outside of the pixel.
---
bool isSubpixelText()const
Returns true if glyphs at different sub-pixel positions may differ on pixel edge coverage.
Equivalent to getFlags() masked with kSubpixelText_Flag.
### Return Value
kSubpixelText_Flag state
### Example
#### Example Output
~~~~
paint.isSubpixelText() == !!(paint.getFlags() & SkPaint::kSubpixelText_Flag)
paint.isSubpixelText() == !!(paint.getFlags() & SkPaint::kSubpixelText_Flag)
~~~~
---
void setSubpixelText(bool subpixelText)
Requests, but does not require, that glyphs respect sub-pixel positioning.
Sets kSubpixelText_Flag if subpixelText is true.
Clears kSubpixelText_Flag if subpixelText is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
When set, Font_Anti_Alias takes advantage of the organization of RGB stripes that
create a color, and relies
on the small size of the stripe and visual perception to make the color fringing imperceptible.
Font_Anti_Alias can be enabled on devices that orient stripes horizontally or vertically, and that order
the color components as RGB or BGR.
---
bool isLCDRenderText()const
Returns true if glyphs may use LCD striping to improve glyph edges.
Returns true if SkPaint::Flags kLCDRenderText_Flag is set.
### Return Value
kLCDRenderText_Flag state
### Example
#### Example Output
~~~~
paint.isLCDRenderText() == !!(paint.getFlags() & SkPaint::kLCDRenderText_Flag)
paint.isLCDRenderText() == !!(paint.getFlags() & SkPaint::kLCDRenderText_Flag)
~~~~
---
void setLCDRenderText(bool lcdText)
Requests, but does not require, that glyphs use LCD striping for glyph edges.
Sets kLCDRenderText_Flag if lcdText is true.
Clears kLCDRenderText_Flag if lcdText is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
---
Font_Embedded_Bitmaps allows selecting custom sized bitmap Glyphs.
Flags kEmbeddedBitmapText_Flag when set chooses an embedded bitmap glyph over an outline contained
in a font if the platform supports this option.
FreeType selects the bitmap glyph if available when kEmbeddedBitmapText_Flag is set, and selects
the outline glyph if kEmbeddedBitmapText_Flag is clear.
Windows may select the bitmap glyph but is not required to do so.
OS_X and iOS do not support this option.
Font_Embedded_Bitmaps is disabled by default.
Font_Embedded_Bitmaps can be enabled by default by setting SkPaintDefaults_Flags to
kEmbeddedBitmapText_Flag at compile time.
### Example
The "hintgasp" TrueType font in the Skia resources/fonts directory
includes an embedded bitmap Glyph at odd font sizes. This example works
on platforms that use FreeType as their Font_Engine.
Windows may, but is not required to, return a bitmap glyph if
kEmbeddedBitmapText_Flag is set.
SkBitmap bitmap;
bitmap.allocN32Pixels(30, 15);
bitmap.eraseColor(0);
SkCanvas offscreen(bitmap);
SkPaint paint;
paint.setAntiAlias(true);
paint.setTextSize(13);
paint.setTypeface(MakeResourceAsTypeface("fonts/hintgasp.ttf"));
for (bool embedded : { false, true}) {
paint.setEmbeddedBitmapText(embedded);
offscreen.drawString("A", embedded ? 5 : 15, 15, paint);
}
canvas->drawBitmap(bitmap, 0, 0);
canvas->scale(10, 10);
canvas->drawBitmap(bitmap, -2, 1);
---
bool isEmbeddedBitmapText()const
Returns true if font engine may return glyphs from font bitmaps instead of from outlines.
Equivalent to getFlags() masked with kEmbeddedBitmapText_Flag.
### Return Value
kEmbeddedBitmapText_Flag state
### Example
#### Example Output
~~~~
paint.isEmbeddedBitmapText() == !!(paint.getFlags() & SkPaint::kEmbeddedBitmapText_Flag)
paint.isEmbeddedBitmapText() == !!(paint.getFlags() & SkPaint::kEmbeddedBitmapText_Flag)
~~~~
---
void setEmbeddedBitmapText(bool useEmbeddedBitmapText)
Requests, but does not require, to use bitmaps in fonts instead of outlines.
Sets kEmbeddedBitmapText_Flag if useEmbeddedBitmapText is true.
Clears kEmbeddedBitmapText_Flag if useEmbeddedBitmapText is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
If Hinting is set to SkFontHinting::kNormal or SkFontHinting::kFull, Font_Force_Hinting
instructs the Font_Manager to always hint Glyphs.
Font_Force_Hinting has no effect if Hinting is set to SkFontHinting::kNone or
SkFontHinting::kSlight.
Font_Force_Hinting only affects platforms that use FreeType as the Font_Manager.
---
bool isAutohinted()const
Returns true if SkPaint::Hinting is set to SkFontHinting::kNormal or
SkFontHinting::kFull, and if platform uses FreeType as the font manager.
If true, instructs the font manager to always hint glyphs.
Equivalent to getFlags() masked with kAutoHinting_Flag.
### Return Value
kAutoHinting_Flag state
### Example
#### Example Output
~~~~
paint.isAutohinted() == !!(paint.getFlags() & SkPaint::kAutoHinting_Flag)
paint.isAutohinted() == !!(paint.getFlags() & SkPaint::kAutoHinting_Flag)
~~~~
### See Also
setAutohinted Hinting
---
void setAutohinted(bool useAutohinter)
Sets whether to always hint glyphs.
If SkPaint::Hinting is set to SkFontHinting::kNormal or SkFontHinting::kFull
and useAutohinter is set, instructs the font manager to always hint glyphs.
useAutohinter has no effect if SkPaint::Hinting is set to SkFontHinting::kNone or
SkFontHinting::kSlight.
Only affects platforms that use FreeType as the font manager.
Sets kAutoHinting_Flag if useAutohinter is true.
Clears kAutoHinting_Flag if useAutohinter is false.
### Parameters
### Example
### See Also
isAutohinted Hinting
---
Font_Embolden approximates the bold font style accompanying a normal font when a bold font face
is not available. Skia does not provide font substitution; it is up to the client to find the
bold font face using the platform Font_Manager.
Use Text_Skew_X to approximate an italic font style when the italic font face
is not available.
A FreeType based port may define SK_USE_FREETYPE_EMBOLDEN at compile time to direct
the font engine to create the bold Glyphs. Otherwise, the extra bold is computed
by increasing the stroke width and setting the Style to kStrokeAndFill_Style as needed.
Font_Embolden is disabled by default.
### Example
---
bool isFakeBoldText()const
Returns true if approximate bold by increasing the stroke width when creating glyph bitmaps
from outlines.
Equivalent to getFlags() masked with kFakeBoldText_Flag.
### Return Value
kFakeBoldText_Flag state
### Example
#### Example Output
~~~~
paint.isFakeBoldText() == !!(paint.getFlags() & SkPaint::kFakeBoldText_Flag)
paint.isFakeBoldText() == !!(paint.getFlags() & SkPaint::kFakeBoldText_Flag)
~~~~
---
void setFakeBoldText(bool fakeBoldText)
Increases stroke width when creating glyph bitmaps to approximate a bold typeface.
Sets kFakeBoldText_Flag if fakeBoldText is true.
Clears kFakeBoldText_Flag if fakeBoldText is false.
### Parameters
### Example
#### Example Output
~~~~
paint1 == paint2
~~~~
---
Filter_Quality trades speed for image filtering when the image is scaled.
A lower Filter_Quality draws faster, but has less fidelity.
A higher Filter_Quality draws slower, but looks better.
If the image is drawn without scaling, the Filter_Quality choice will not result
in a noticeable difference.
Filter_Quality is used in Paint passed as a parameter to
and when Paint has a Shader specialization that uses Image or Bitmap.
Filter_Quality is kNone_SkFilterQuality by default.
### Example
---
SkFilterQuality getFilterQuality()const
Returns SkFilterQuality, the image filtering level. A lower setting
draws faster; a higher setting looks better when the image is scaled.
### Return Value
one of: kNone_SkFilterQuality, kLow_SkFilterQuality,
kMedium_SkFilterQuality, kHigh_SkFilterQuality
### Example
#### Example Output
~~~~
kNone_SkFilterQuality == paint.getFilterQuality()
~~~~
---
void setFilterQuality(SkFilterQuality quality)
Sets SkFilterQuality, the image filtering level. A lower setting
draws faster; a higher setting looks better when the image is scaled.
Does not check to see if quality is valid.
### Parameters
kMedium_SkFilterQuality, kHigh_SkFilterQuality
### Example
#### Example Output
~~~~
kHigh_SkFilterQuality == paint.getFilterQuality()
~~~~
### See Also
SkFilterQuality Image_Scaling
---
| name | description |
| --- | --- |
| getColor | returns Color_Alpha and RGB, one drawing color |
| setColor | sets Color_Alpha and RGB, one drawing color |
Color specifies the red, blue, green, and Color_Alpha
values used to draw a filled or stroked shape in a 32-bit value. Each component
occupies 8-bits, ranging from zero: no contribution; to 255: full intensity.
All values in any combination are valid.
Color is not Premultiplied; Color_Alpha sets the transparency independent of
RGB: red, blue, and green.
The bit positions of Color_Alpha and RGB are independent of the bit
positions on the output device, which may have more or fewer bits, and may have
a different arrangement.
| bit positions | Color_Alpha | red | blue | green |
| --- | --- | --- | --- | --- |
| | 31 - 24 | 23 - 16 | 15 - 8 | 7 - 0 |
### Example
---
SkColor getColor()const
Retrieves alpha and RGB, unpremultiplied, packed into 32 bits.
Use helpers SkColorGetA(), SkColorGetR(), SkColorGetG(), and SkColorGetB() to extract
a color component.
### Return Value
unpremultiplied ARGB
### Example
#### Example Output
~~~~
Yellow is 100% red, 100% green, and 0% blue.
~~~~
### See Also
getColor4f SkColor
---
SkColor4f getColor4f()const
Retrieves alpha and RGB, unpremultiplied, as four floating point values. RGB are
are extended sRGB values (sRGB gamut, and encoded with the sRGB transfer function).
### Return Value
unpremultiplied RGBA
### Example
#### Example Output
~~~~
Yellow is 100% red, 100% green, and 0% blue.
~~~~
### See Also
getColor SkColor
---
void setColor(SkColor color)
Sets alpha and RGB used when stroking and filling. The color is a 32-bit value,
unpremultiplied, packing 8-bit components for alpha, red, blue, and green.
### Parameters
### Example
#### Example Output
~~~~
green1 == green2
~~~~
### See Also
SkColor setColor4f setARGB SkColorSetARGB
---
void setColor4f(const SkColor4f& color, SkColorSpace* colorSpace)
Sets alpha and RGB used when stroking and filling. The color is four floating
point values, unpremultiplied. The color values are interpreted as being in
the colorSpace. If colorSpace is nullptr, then color is assumed to be in the
sRGB color space.
### Parameters
### Example
#### Example Output
~~~~
green1 == green2
~~~~
### See Also
SkColor setColor setARGB SkColorSetARGB
Color_Alpha sets the transparency independent of RGB: red, blue, and green.
---
uint8_t getAlpha()const
Retrieves alpha from the color used when stroking and filling.
### Return Value
alpha ranging from zero, fully transparent, to 255, fully opaque
### Example
#### Example Output
~~~~
255 == paint.getAlpha()
~~~~
---
void setAlpha(U8CPU a)
Replaces alpha, leaving RGB
unchanged. An out of range value triggers an assert in the debug
build. a is a value from zero to 255.
a set to zero makes color fully transparent; a set to 255 makes color
fully opaque.
### Parameters
### Example
#### Example Output
~~~~
0x44112233 == paint.getColor()
~~~~
---
void setARGB(U8CPU a, U8CPU r, U8CPU g, U8CPU b)
Sets color used when drawing solid fills. The color components range from 0 to 255.
The color is unpremultiplied; alpha sets the transparency independent of RGB.
### Parameters
a |
amount of alpha, from fully transparent (0) to fully opaque (255) |
r |
amount of red, from no red (0) to full red (255) |
g |
amount of green, from no green (0) to full green (255) |
b |
amount of blue, from no blue (0) to full blue (255) |
### Example
#### Example Output
~~~~
transRed1 == transRed2
~~~~
### See Also
setColor SkColorSetARGB
---
Style specifies if the geometry is filled, stroked, or both filled and stroked.
Some shapes ignore Style and are always drawn filled or stroked.
Set Style to kFill_Style to fill the shape.
The fill covers the area inside the geometry for most shapes.
Set Style to kStroke_Style to stroke the shape.
The stroke covers the area described by following the shape edge with a pen or brush of
Stroke_Width. The area covered where the shape starts and stops is described by Stroke_Cap.
The area covered where the shape turns a corner is described by Stroke_Join.
The stroke is centered on the shape; it extends equally on either side of the shape edge.As Stroke_Width gets smaller, the drawn path frame is thinner. Stroke_Width less than one
may have gaps, and if kAntiAlias_Flag is set, Color_Alpha will increase to visually decrease coverage.
### See Also
Path_Fill_Type Path_Effect Style_Fill Style_Stroke
---
Stroke_Width of zero has a special meaning and switches drawing to use Hairline.
Hairline draws the thinnest continuous frame. If kAntiAlias_Flag is clear, adjacent pixels
flow horizontally, vertically,or diagonally.
Path drawing with Hairline may hit the same pixel more than once. For instance, Path containing
two lines in one Path_Contour will draw the corner point once, but may both lines may draw the adjacent
pixel. If kAntiAlias_Flag is set, transparency is applied twice, resulting in a darker pixel. Some
GPU-backed implementations apply transparency at a later drawing stage, avoiding double hit pixels
while stroking.
### See Also
Path_Fill_Type Path_Effect Style_Fill Style_Stroke
---
enum Style : uint8_t {
kFill_Style,
kStroke_Style,
kStrokeAndFill_Style,
};
static constexpr int kStyleCount = kStrokeAndFill_Style + 1;
Set Style to fill, stroke, or both fill and stroke geometry.
The stroke and fill
share all paint attributes; for instance, they are drawn with the same color.
Use kStrokeAndFill_Style to avoid hitting the same pixels twice with a stroke draw and
a fill draw.
### Constants
Const |
Value |
Description |
SkPaint::kFill_Style |
0 |
Applies to Rect, Region, Round_Rect, Circles, Ovals, Path, and Text.
Bitmap, Image, Patches, Region, Sprites, and Vertices are painted as if
kFill_Style is set, and ignore the set Style.
The Path_Fill_Type specifies additional rules to fill the area outside the path edge,
and to create an unfilled hole inside the shape.
Style is set to kFill_Style by default.
|
SkPaint::kStroke_Style |
1 |
Applies to Rect, Region, Round_Rect, Arcs, Circles, Ovals, Path, and Text.
Arcs, Lines, and points, are always drawn as if kStroke_Style is set,
and ignore the set Style.
The stroke construction is unaffected by the Path_Fill_Type.
|
SkPaint::kStrokeAndFill_Style |
2 |
Applies to Rect, Region, Round_Rect, Circles, Ovals, Path, and Text.
Path is treated as if it is set to SkPath::kWinding_FillType,
and the set Path_Fill_Type is ignored.
|
SkPaint::kStyleCount |
3 |
May be used to verify that Style is a legal value.
|
---
Style getStyle()const
Returns whether the geometry is filled, stroked, or filled and stroked.
### Return Value
one of:kFill_Style, kStroke_Style, kStrokeAndFill_Style
### Example
#### Example Output
~~~~
SkPaint::kFill_Style == paint.getStyle()
~~~~
### See Also
Style setStyle
---
void setStyle(Style style)
Sets whether the geometry is filled, stroked, or filled and stroked.
Has no effect if style is not a legal SkPaint::Style value.
### Parameters
### Example
### See Also
Style getStyle
---
Stroke_Width sets the width for stroking. The width is the thickness
of the stroke perpendicular to the path direction when the paint style is
set to kStroke_Style or kStrokeAndFill_Style.
When width is greater than zero, the stroke encompasses as many pixels partially
or fully as needed. When the width equals zero, the paint enables hairlines;
the stroke is always one pixel wide.
The stroke dimensions are scaled by the canvas matrix, but Hairline stroke
remains one pixel wide regardless of scaling.
The default width for the paint is zero.
### Example
The pixels hit to represent thin
lines vary with the angle of the
line and the platform implementation.
---
SkScalar getStrokeWidth()const
Returns the thickness of the pen used by SkPaint to
outline the shape.
### Return Value
zero for hairline, greater than zero for pen thickness
### Example
#### Example Output
~~~~
0 == paint.getStrokeWidth()
~~~~
---
void setStrokeWidth(SkScalar width)
Sets the thickness of the pen used by the paint to
outline the shape.
Has no effect if width is less than zero.
### Parameters
width |
zero thickness for hairline; greater than zero for pen thickness |
### Example
#### Example Output
~~~~
5 == paint.getStrokeWidth()
~~~~
---
Miter_Limit specifies the maximum miter length,
relative to the stroke width.
Miter_Limit is used when the Stroke_Join
is set to kMiter_Join, and the Style is either kStroke_Style
or kStrokeAndFill_Style.
If the miter at a corner exceeds this limit, kMiter_Join
is replaced with kBevel_Join.
Miter_Limit can be computed from the corner angle using:
miter limit = 1 / sin ( angle / 2 )
.
Miter_Limit default value is 4.
The default may be changed at compile time by setting SkPaintDefaults_MiterLimit
in "SkUserConfig.h" or as a define supplied by the build environment.
Here are some miter limits and the angles that triggers them.
| miter limit | angle in degrees |
| --- | --- |
| 10 | 11.48 |
| 9 | 12.76 |
| 8 | 14.36 |
| 7 | 16.43 |
| 6 | 19.19 |
| 5 | 23.07 |
| 4 | 28.96 |
| 3 | 38.94 |
| 2 | 60 |
| 1 | 180 |
### Example
This example draws a stroked corner and the miter length beneath.
When the
miter limit is decreased slightly, the miter join is replaced
by a bevel join.
---
SkScalar getStrokeMiter()const
Returns the limit at which a sharp corner is drawn beveled.
### Return Value
zero and greater miter limit
### Example
#### Example Output
~~~~
default miter limit == 4
~~~~
### See Also
Miter_Limit setStrokeMiter Join
---
void setStrokeMiter(SkScalar miter)
Sets the limit at which a sharp corner is drawn beveled.
Valid values are zero and greater.
Has no effect if miter is less than zero.
### Parameters
### Example
#### Example Output
~~~~
default miter limit == 8
~~~~
### See Also
Miter_Limit getStrokeMiter Join
---
enum Cap {
kButt_Cap,
kRound_Cap,
kSquare_Cap,
kLast_Cap = kSquare_Cap,
kDefault_Cap = kButt_Cap,
};
static constexpr int kCapCount = kLast_Cap + 1;
Stroke_Cap draws at the beginning and end of an open Path_Contour.
### Constants
Stroke describes the area covered by a pen of Stroke_Width as it
follows the Path_Contour, moving parallel to the contour direction.
If the Path_Contour is not terminated by SkPath::kClose_Verb, the contour has a
visible beginning and end.
Path_Contour may start and end at the same point; defining Zero_Length_Contour.
kButt_Cap and Zero_Length_Contour is not drawn.
kRound_Cap and Zero_Length_Contour draws a circle of diameter Stroke_Width
at the contour point.
kSquare_Cap and Zero_Length_Contour draws an upright square with a side of
Stroke_Width at the contour point.
Stroke_Cap is kButt_Cap by default.
### Example
---
Cap getStrokeCap()const
Returns the geometry drawn at the beginning and end of strokes.
### Return Value
one of: kButt_Cap, kRound_Cap, kSquare_Cap
### Example
#### Example Output
~~~~
kButt_Cap == default stroke cap
~~~~
### See Also
Stroke_Cap setStrokeCap
---
void setStrokeCap(Cap cap)
Sets the geometry drawn at the beginning and end of strokes.
### Parameters
has no effect if cap is not valid
### Example
#### Example Output
~~~~
kRound_Cap == paint.getStrokeCap()
~~~~
### See Also
Stroke_Cap getStrokeCap
Stroke_Join draws at the sharp corners of an open or closed Path_Contour.
Stroke describes the area covered by a pen of Stroke_Width as it
follows the Path_Contour, moving parallel to the contour direction.
If the contour direction changes abruptly, because the tangent direction leading
to the end of a curve within the contour does not match the tangent direction of
the following curve, the pair of curves meet at Stroke_Join.
### Example
---
enum Join : uint8_t {
kMiter_Join,
kRound_Join,
kBevel_Join,
kLast_Join = kBevel_Join,
kDefault_Join = kMiter_Join,
};
static constexpr int kJoinCount = kLast_Join + 1;
Join specifies how corners are drawn when a shape is stroked. Join
affects the four corners of a stroked rectangle, and the connected segments in a
stroked path.
Choose miter join to draw sharp corners. Choose round join to draw a circle with a
radius equal to the stroke width on top of the corner. Choose bevel join to minimally
connect the thick strokes.
The fill path constructed to describe the stroked path respects the join setting but may
not contain the actual join. For instance, a fill path constructed with round joins does
not necessarily include circles at each connected segment.
### Constants
### Example
### See Also
setStrokeJoin getStrokeJoin setStrokeMiter getStrokeMiter
---
Join getStrokeJoin()const
Returns the geometry drawn at the corners of strokes.
### Return Value
one of: kMiter_Join, kRound_Join, kBevel_Join
### Example
#### Example Output
~~~~
kMiter_Join == default stroke join
~~~~
### See Also
Stroke_Join setStrokeJoin
---
void setStrokeJoin(Join join)
Sets the geometry drawn at the corners of strokes.
### Parameters
otherwise, has no effect
### Example
#### Example Output
~~~~
kMiter_Join == paint.getStrokeJoin()
~~~~
### See Also
Stroke_Join getStrokeJoin
### See Also
Miter_Limit
---
Fill_Path creates a Path by applying the Path_Effect, followed by the Style_Stroke.
If Paint contains Path_Effect, Path_Effect operates on the source Path; the result
replaces the destination Path. Otherwise, the source Path is replaces the
destination Path.
Fill Path can request the Path_Effect to restrict to a culling rectangle, but
the Path_Effect is not required to do so.
If Style is kStroke_Style or kStrokeAndFill_Style,
and Stroke_Width is greater than zero, the Stroke_Width, Stroke_Cap, Stroke_Join,
and Miter_Limit operate on the destination Path, replacing it.
Fill Path can specify the precision used by Stroke_Width to approximate the stroke geometry.
If the Style is kStroke_Style and the Stroke_Width is zero, getFillPath
returns false since Hairline has no filled equivalent.
### See Also
Style_Stroke Stroke_Width Path_Effect
---
bool getFillPath(const SkPath& src, SkPath* dst, const SkRect* cullRect, SkScalar resScale = 1)const
Returns the filled equivalent of the stroked path.
### Parameters
to favor speed and size
### Return Value
true if the path represents style fill, or false if it represents hairline
### Example
A very small
Quad stroke is turned into a filled
path with increasing levels of precision.
At the lowest precision, the
Quad stroke is approximated by a rectangle.
At the highest precision, the filled
path has high fidelity compared to the original stroke.
---
bool getFillPath(const SkPath& src, SkPath* dst)const
Returns the filled equivalent of the stroked path.
Replaces dst with the src path modified by SkPathEffect and style stroke.
SkPathEffect, if any, is not culled. stroke width is created with default precision.
### Parameters
### Return Value
true if the path represents style fill, or false if it represents hairline
### Example
---
Shader defines the colors used when drawing a shape.
Shader may be an image, a gradient, or a computed fill.
If Paint has no Shader, then Color fills the shape.
Shader is modulated by Color_Alpha component of Color.
If Shader object defines only Color_Alpha, then Color modulated by Color_Alpha describes
the fill.
The drawn transparency can be modified without altering Shader, by changing Color_Alpha.
### Example
If Shader generates only Color_Alpha then all components of Color modulate the output.
### Example
---
SkShader* getShader()const
Returns optional colors used when filling a path, such as a gradient.
Does not alter SkShader SkRefCnt.
### Return Value
SkShader if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == shader
nullptr != shader
~~~~
---
sk_sp<SkShader> refShader()const
Returns optional colors used when filling a path, such as a gradient.
Increases SkShader SkRefCnt by one.
### Return Value
SkShader if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
shader unique: true
shader unique: false
~~~~
---
void setShader(sk_sp<SkShader> shader)
Sets optional colors used when filling a path, such as a gradient.
Sets SkShader to shader, decreasing SkRefCnt of the previous SkShader.
Increments shader SkRefCnt by one.
### Parameters
### Example
---
Color_Filter alters the color used when drawing a shape.
Color_Filter may apply Blend_Mode, transform the color through a matrix, or composite multiple filters.
If Paint has no Color_Filter, the color is unaltered.
The drawn transparency can be modified without altering Color_Filter, by changing Color_Alpha.
### Example
---
SkColorFilter* getColorFilter()const
Returns SkColorFilter if set, or nullptr.
Does not alter SkColorFilter SkRefCnt.
### Return Value
SkColorFilter if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == color filter
nullptr != color filter
~~~~
---
sk_sp<SkColorFilter> refColorFilter()const
Returns SkColorFilter if set, or nullptr.
Increases SkColorFilter SkRefCnt by one.
### Return Value
SkColorFilter if set, or nullptr
### Example
#### Example Output
~~~~
color filter unique: true
color filter unique: false
~~~~
---
void setColorFilter(sk_sp<SkColorFilter> colorFilter)
Sets SkColorFilter to filter, decreasing SkRefCnt of the previous
SkColorFilter. Pass nullptr to clear SkColorFilter.
Increments filter SkRefCnt by one.
### Parameters
### Example
---
Blend_Mode describes how Color combines with the destination color.
The default setting, SkBlendMode::kSrcOver, draws the source color
over the destination color.
### Example
### See Also
Blend_Mode
---
SkBlendMode getBlendMode()const
Returns SkBlendMode.
By default, returns SkBlendMode::kSrcOver.
### Return Value
mode used to combine source color with destination color
### Example
#### Example Output
~~~~
kSrcOver == getBlendMode
kSrcOver != getBlendMode
~~~~
---
bool isSrcOver()const
Returns true if SkBlendMode is SkBlendMode::kSrcOver, the default.
### Return Value
true if SkBlendMode is SkBlendMode::kSrcOver
### Example
#### Example Output
~~~~
isSrcOver == true
isSrcOver != true
~~~~
---
void setBlendMode(SkBlendMode mode)
Sets SkBlendMode to mode.
Does not check for valid input.
### Parameters
### Example
#### Example Output
~~~~
isSrcOver == true
isSrcOver != true
~~~~
---
Path_Effect modifies the path geometry before drawing it.
Path_Effect may implement dashing, custom fill effects and custom stroke effects.
If Paint has no Path_Effect, the path geometry is unaltered when filled or stroked.
### Example
### See Also
Path_Effect
---
SkPathEffect* getPathEffect()const
Returns SkPathEffect if set, or nullptr.
Does not alter SkPathEffect SkRefCnt.
### Return Value
SkPathEffect if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == path effect
nullptr != path effect
~~~~
---
sk_sp<SkPathEffect> refPathEffect()const
Returns SkPathEffect if set, or nullptr.
Increases SkPathEffect SkRefCnt by one.
### Return Value
SkPathEffect if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
path effect unique: true
path effect unique: false
~~~~
---
void setPathEffect(sk_sp<SkPathEffect> pathEffect)
Sets SkPathEffect to pathEffect, decreasing SkRefCnt of the previous
SkPathEffect. Pass nullptr to leave the path geometry unaltered.
Increments pathEffect SkRefCnt by one.
### Parameters
### Example
---
Mask_Filter uses coverage of the shape drawn to create Mask_Alpha.
Mask_Filter takes a Mask, and returns a Mask.
Mask_Filter may change the geometry and transparency of the shape, such as
creating a blur effect. Set Mask_Filter to nullptr to prevent Mask_Filter from
modifying the draw.
### Example
---
SkMaskFilter* getMaskFilter()const
Returns SkMaskFilter if set, or nullptr.
Does not alter SkMaskFilter SkRefCnt.
### Return Value
SkMaskFilter if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == mask filter
nullptr != mask filter
~~~~
---
sk_sp<SkMaskFilter> refMaskFilter()const
Returns SkMaskFilter if set, or nullptr.
Increases SkMaskFilter SkRefCnt by one.
### Return Value
SkMaskFilter if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
mask filter unique: true
mask filter unique: false
~~~~
---
void setMaskFilter(sk_sp<SkMaskFilter> maskFilter)
Sets SkMaskFilter to maskFilter, decreasing SkRefCnt of the previous
SkMaskFilter. Pass nullptr to clear SkMaskFilter and leave SkMaskFilter effect on
mask alpha unaltered.
Increments maskFilter SkRefCnt by one.
### Parameters
maskFilter |
modifies clipping mask generated from drawn geometry |
### Example
---
Typeface identifies the font used when drawing and measuring text.
Typeface may be specified by name, from a file, or from a data stream.
The default Typeface defers to the platform-specific default font
implementation.
### Example
---
SkTypeface* getTypeface()const
Returns SkTypeface if set, or nullptr.
Does not alter SkTypeface SkRefCnt.
### Return Value
SkTypeface if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == typeface
nullptr != typeface
~~~~
---
sk_sp<SkTypeface> refTypeface()const
Increases SkTypeface SkRefCnt by one.
### Return Value
SkTypeface if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
typeface1 != typeface2
typeface1 == typeface2
~~~~
---
void setTypeface(sk_sp<SkTypeface> typeface)
Sets SkTypeface to typeface, decreasing SkRefCnt of the previous SkTypeface.
Pass nullptr to clear SkTypeface and use the default typeface. Increments
typeface SkRefCnt by one.
### Parameters
### Example
---
Image_Filter operates on the pixel representation of the shape, as modified by Paint
with Blend_Mode set to SkBlendMode::kSrcOver. Image_Filter creates a new bitmap,
which is drawn to the device using the set Blend_Mode.
Image_Filter is higher level than Mask_Filter; for instance, an Image_Filter
can operate on all channels of Color, while Mask_Filter generates Alpha only.
Image_Filter operates independently of and can be used in combination with
Mask_Filter.
### Example
---
SkImageFilter* getImageFilter()const
Returns SkImageFilter if set, or nullptr.
Does not alter SkImageFilter SkRefCnt.
### Return Value
SkImageFilter if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == image filter
nullptr != image filter
~~~~
---
sk_sp<SkImageFilter> refImageFilter()const
Returns SkImageFilter if set, or nullptr.
Increases SkImageFilter SkRefCnt by one.
### Return Value
SkImageFilter if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
image filter unique: true
image filter unique: false
~~~~
---
void setImageFilter(sk_sp<SkImageFilter> imageFilter)
Sets SkImageFilter to imageFilter, decreasing SkRefCnt of the previous
SkImageFilter. Pass nullptr to clear SkImageFilter, and remove SkImageFilter effect
on drawing.
Increments imageFilter SkRefCnt by one.
### Parameters
### Example
---
Draw_Looper sets a modifier that communicates state from one Draw_Layer
to another to construct the draw.
Draw_Looper draws one or more times, modifying the canvas and paint each time.
Draw_Looper may be used to draw multiple colors or create a colored shadow.
Set Draw_Looper to nullptr to prevent Draw_Looper from modifying the draw.
### Example
---
SkDrawLooper* getDrawLooper()const
Returns SkDrawLooper if set, or nullptr.
Does not alter SkDrawLooper SkRefCnt.
### Return Value
SkDrawLooper if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
nullptr == draw looper
nullptr != draw looper
~~~~
---
sk_sp<SkDrawLooper> refDrawLooper()const
Returns SkDrawLooper if set, or nullptr.
Increases SkDrawLooper SkRefCnt by one.
### Return Value
SkDrawLooper if previously set, nullptr otherwise
### Example
#### Example Output
~~~~
draw looper unique: true
draw looper unique: false
~~~~
---
void setDrawLooper(sk_sp<SkDrawLooper> drawLooper)
Sets SkDrawLooper to drawLooper, decreasing SkRefCnt of the previous
drawLooper. Pass nullptr to clear SkDrawLooper and leave SkDrawLooper effect on
drawing unaltered.
Increments drawLooper SkRefCnt by one.
### Parameters
### Example
---
Text_Size adjusts the overall text size in points.
Text_Size can be set to any positive value or zero.
Text_Size defaults to 12.
Set SkPaintDefaults_TextSize at compile time to change the default setting.
### Example
---
SkScalar getTextSize()const
Returns text size in points.
### Return Value
typographic height of text
### Example
---
void setTextSize(SkScalar textSize)
Sets text size in points.
Has no effect if textSize is not greater than or equal to zero.
### Parameters
### Example
---
Text_Scale_X adjusts the text horizontal scale.
Text scaling approximates condensed and expanded type faces when the actual face
is not available.
Text_Scale_X can be set to any value.
Text_Scale_X defaults to 1.
### Example
---
SkScalar getTextScaleX()const
Returns text scale on x-axis.
Default value is 1.
### Return Value
text horizontal scale
### Example
---
void setTextScaleX(SkScalar scaleX)
Sets text scale on x-axis.
Default value is 1.
### Parameters
### Example
---
Text_Skew_X adjusts the text horizontal slant.
Text skewing approximates italic and oblique type faces when the actual face
is not available.
Text_Skew_X can be set to any value.
Text_Skew_X defaults to 0.
### Example
---
SkScalar getTextSkewX()const
Returns text skew on x-axis.
Default value is zero.
### Return Value
additional shear on x-axis relative to y-axis
### Example
---
void setTextSkewX(SkScalar skewX)
Sets text skew on x-axis.
Default value is zero.
### Parameters
skewX |
additional shear on x-axis relative to y-axis |
### Example
---
### Example
First
line is encoded in UTF-8.
Second
line is encoded in UTF-16.
Third
line is encoded in UTF-32.
Fourth
line has 16-bit
glyph indices.
---
SkTextEncoding getTextEncoding()const
Returns the text encoding. Text encoding describes how to interpret the text bytes pass
to methods like measureText() and SkCanvas::drawText().
### Return Value
the text encoding
### Example
#### Example Output
~~~~
kUTF8_SkTextEncoding == text encoding
kGlyphID_SkTextEncoding == text encoding
~~~~
---
void setTextEncoding(SkTextEncoding encoding)
Sets the text encoding. Text encoding describes how to interpret the text bytes pass
to methods like measureText() and SkCanvas::drawText().
### Parameters
### Example
#### Example Output
~~~~
4 != text encoding
~~~~
---
---
SkScalar getFontMetrics(SkFontMetrics* metrics)const
Returns SkFontMetrics associated with SkTypeface.
The return value is the recommended spacing between lines: the sum of metrics
descent, ascent, and leading.
If metrics is not nullptr, SkFontMetrics is copied to metrics.
Results are scaled by text size but does not take into account
dimensions required by text scale x, text skew x, fake bold,
style stroke, and SkPathEffect.
### Parameters
### Return Value
recommended spacing between lines
### Example
### See Also
Font_Size Typeface Typeface_Methods
---
SkScalar getFontSpacing()const
Returns the recommended spacing between lines: the sum of metrics
descent, ascent, and leading.
Result is scaled by text size but does not take into account
dimensions required by stroking and SkPathEffect.
Returns the same result as getFontMetrics().
### Return Value
recommended spacing between lines
### Example
#### Example Output
~~~~
textSize: 12 fontSpacing: 13.9688
textSize: 18 fontSpacing: 20.9531
textSize: 24 fontSpacing: 27.9375
textSize: 32 fontSpacing: 37.25
~~~~
---
int textToGlyphs(const void* text, size_t byteLength, SkGlyphID glyphs[])const
Converts text into glyph indices.
Returns the number of glyph indices represented by text.
SkTextEncoding specifies how text represents characters or glyphs.
glyphs may be nullptr, to compute the glyph count.
Does not check text for valid character codes or valid glyph indices.
If byteLength equals zero, returns zero.
If byteLength includes a partial character, the partial character is ignored.
If SkTextEncoding is kUTF8_SkTextEncoding and
text contains an invalid UTF-8 sequence, zero is returned.
### Parameters
### Return Value
number of glyphs represented by text of length byteLength
### Example
---
int countText(const void* text, size_t byteLength)const
Returns the number of glyphs in text.
Uses SkTextEncoding to count the glyphs.
Returns the same result as textToGlyphs().
### Parameters
### Return Value
number of glyphs represented by text of length byteLength
### Example
#### Example Output
~~~~
count = 5
~~~~
---
bool containsText(const void* text, size_t byteLength)const
Returns true if all text corresponds to a non-zero glyph index.
Returns false if any characters in text are not supported in
SkTypeface.
If SkTextEncoding is kGlyphID_SkTextEncoding,
returns true if all glyph indices in text are non-zero;
does not check to see if text contains valid glyph indices for SkTypeface.
Returns true if byteLength is zero.
### Parameters
### Return Value
true if all text corresponds to a non-zero glyph index
containsText succeeds for degree symbol, but cannot find a
glyph index
corresponding to the Unicode surrogate code
point.
#### Example Output
~~~~
0x00b0 == has char
0xd800 != has char
~~~~
### Example
#### Example Output
~~~~
0x01ff == has glyph
0x0000 != has glyph
0xffff == has glyph
~~~~
### See Also
setTextEncoding Typeface
---
void glyphsToUnichars(const SkGlyphID glyphs[], int count, SkUnichar text[])const
Converts glyphs into text if possible.
Glyph values without direct Unicode equivalents are mapped to zero.
Uses the SkTypeface, but is unaffected
by SkTextEncoding; the text values returned are equivalent to kUTF32_SkTextEncoding.
Only supported on platforms that use FreeType as the font engine.
### Parameters
---
SkScalar measureText(const void* text, size_t length, SkRect* bounds)const
Returns the advance width of text.
The advance is the normal distance to move before drawing additional text.
Uses SkTextEncoding to decode text, SkTypeface to get the font metrics,
and text size, text scale x, text skew x, stroke width, and
SkPathEffect to scale the metrics and bounds.
Returns the bounding box of text if bounds is not nullptr.
The bounding box is computed as if the text was drawn at the origin.
### Parameters
text |
character codes or glyph indices to be measured |
length |
number of bytes of text to measure |
bounds |
returns bounding box relative to (0, 0) if not nullptr |
### Return Value
advance width or height
### Example
---
SkScalar measureText(const void* text, size_t length)const
Returns the advance width of text.
The advance is the normal distance to move before drawing additional text.
Uses SkTextEncoding to decode text, SkTypeface to get the font metrics,
and text size to scale the metrics.
Does not scale the advance or bounds by fake bold or SkPathEffect.
### Parameters
### Return Value
advance width or height
### Example
#### Example Output
~~~~
default width = 5
double width = 10
~~~~
---
int getTextWidths(const void* text, size_t byteLength, SkScalar widths[], SkRect bounds[] = nullptr)const
Retrieves the advance and bounds for each glyph in text, and returns
the glyph count in text.
Both widths and bounds may be nullptr.
If widths is not nullptr, widths must be an array of glyph count entries.
if bounds is not nullptr, bounds must be an array of glyph count entries.
Uses SkTextEncoding to decode text, SkTypeface to get the font metrics,
and text size to scale the widths and bounds.
Does not scale the advance by fake bold or SkPathEffect.
Does include fake bold and SkPathEffect in the bounds.
### Parameters
### Return Value
glyph count in text
### Example
Bounds of
Glyphs increase for stroked
text, but
text advance remains the same.
The underlines show the
text advance, spaced to keep them distinct.
Text_Path describes the geometry of Glyphs used to draw text.
---
void getTextPath(const void* text, size_t length, SkScalar x, SkScalar y, SkPath* path)const
Returns the geometry as SkPath equivalent to the drawn text.
Uses SkTextEncoding to decode text, SkTypeface to get the glyph paths,
and text size, fake bold, and SkPathEffect to scale and modify the glyph paths.
All of the glyph paths are stored in path.
Uses x, y, to position path.
### Parameters
### Example
Text is added to
Path, offset, and subtracted from
Path, then added at
the offset location. The result is rendered with one draw call.
---
void getPosTextPath(const void* text, size_t length, const SkPoint pos[], SkPath* path)const
Returns the geometry as SkPath equivalent to the drawn text.
Uses SkTextEncoding to decode text, SkTypeface to get the glyph paths,
and text size, fake bold, and SkPathEffect to scale and modify the glyph paths.
All of the glyph paths are stored in path.
Uses pos array to position path.
pos contains a position for each glyph.
### Parameters
### Example
Simplifies three
Glyphs to eliminate overlaps, and strokes the result.
---
bool nothingToDraw()const
Returns true if SkPaint prevents all drawing;
otherwise, the SkPaint may or may not allow drawing.
Returns true if, for example, SkBlendMode combined with alpha computes a
new alpha of zero.
### Return Value
true if SkPaint prevents all drawing
### Example
#### Example Output
~~~~
initial nothing to draw: false
blend dst nothing to draw: true
blend src over nothing to draw: false
alpha 0 nothing to draw: true
~~~~