SkPixmap Reference === ---
class SkPixmap {

    SkPixmap();
    SkPixmap(const SkImageInfo& info, const void* addr, size_t rowBytes);
    void reset();
    void reset(const SkImageInfo& info, const void* addr, size_t rowBytes);
    void setColorSpace(sk_sp<SkColorSpace> colorSpace);
    bool extractSubset(SkPixmap* subset, const SkIRect& area) const;
    const SkImageInfo& info() const;
    size_t rowBytes() const;
    const void* addr() const;
    int width() const;
    int height() const;
    SkColorType colorType() const;
    SkAlphaType alphaType() const;
    SkColorSpace* colorSpace() const;
    bool isOpaque() const;
    SkIRect bounds() const;
    int rowBytesAsPixels() const;
    int shiftPerPixel() const;
    size_t computeByteSize() const;
    bool computeIsOpaque() const;
    SkColor getColor(int x, int y) const;
    float getAlphaf(int x, int y) const;
    const void* addr(int x, int y) const;
    const uint8_t* addr8() const;
    const uint16_t* addr16() const;
    const uint32_t* addr32() const;
    const uint64_t* addr64() const;
    const uint16_t* addrF16() const;
    const uint8_t* addr8(int x, int y) const;
    const uint16_t* addr16(int x, int y) const;
    const uint32_t* addr32(int x, int y) const;
    const uint64_t* addr64(int x, int y) const;
    const uint16_t* addrF16(int x, int y) const;
    void* writable_addr() const;
    void* writable_addr(int x, int y) const;
    uint8_t* writable_addr8(int x, int y) const;
    uint16_t* writable_addr16(int x, int y) const;
    uint32_t* writable_addr32(int x, int y) const;
    uint64_t* writable_addr64(int x, int y) const;
    uint16_t* writable_addrF16(int x, int y) const;
    bool readPixels(const SkImageInfo& dstInfo, void* dstPixels, size_t dstRowBytes) const;
    bool readPixels(const SkImageInfo& dstInfo, void* dstPixels, size_t dstRowBytes, int srcX,
                    int srcY) const;
    bool readPixels(const SkPixmap& dst, int srcX, int srcY) const;
    bool readPixels(const SkPixmap& dst) const;
    bool scalePixels(const SkPixmap& dst, SkFilterQuality filterQuality) const;
    bool erase(SkColor color, const SkIRect& subset) const;
    bool erase(SkColor color) const;
    bool erase(const SkColor4f& color, const SkIRect* subset = nullptr) const;
};

Pixmap provides a utility to pair SkImageInfo with pixels and row bytes. Pixmap is a low level class which provides convenience functions to access raster destinations. Canvas can not draw Pixmap, nor does Pixmap provide a direct drawing destination. Use Bitmap to draw pixels referenced by Pixmap; use Surface to draw into pixels referenced by Pixmap. Pixmap does not try to manage the lifetime of the pixel memory. Use Pixel_Ref to manage pixel memory; Pixel_Ref is safe across threads. ---
SkPixmap()
Creates an empty SkPixmap without pixels, with kUnknown_SkColorType, with kUnknown_SkAlphaType, and with a width and height of zero. Use reset() to associate pixels, SkColorType, SkAlphaType, width, and height after SkPixmap has been created. ### Return Value empty SkPixmap ### Example
#### Example Output ~~~~ width: 0 height: 0 color: kUnknown_SkColorType alpha: kUnknown_SkAlphaType width: 25 height: 35 color: kRGBA_8888_SkColorType alpha: kOpaque_SkAlphaType ~~~~
### See Also SkPixmap(const SkImageInfo& info, const void* addr, size_t rowBytes) reset() SkAlphaType SkColorType ---
SkPixmap(const SkImageInfo& info, const void* addr, size_t rowBytes)
Creates SkPixmap from info width, height, SkAlphaType, and SkColorType. addr points to pixels, or nullptr. rowBytes should be info.width() times info.bytesPerPixel(), or larger. No parameter checking is performed; it is up to the caller to ensure that addr and rowBytes agree with info. The memory lifetime of pixels is managed by the caller. When SkPixmap goes out of scope, addr is unaffected. SkPixmap may be later modified by reset() to change its size, pixel type, or storage. ### Parameters
info width, height, SkAlphaType, SkColorType of SkImageInfo
addr pointer to pixels allocated by caller; may be nullptr
rowBytes size of one row of addr; width times pixel size, or larger
### Return Value initialized SkPixmap ### Example
SkImage::MakeRasterCopy takes const SkPixmap& as an argument. The example constructs a SkPixmap from the brace-delimited parameters.
#### Example Output ~~~~ image alpha only = false copy alpha only = true ~~~~
### See Also SkPixmap() reset() SkAlphaType SkColorType ---
void reset()
Sets width, height, row bytes to zero; pixel address to nullptr; SkColorType to kUnknown_SkColorType; and SkAlphaType to kUnknown_SkAlphaType. The prior pixels are unaffected; it is up to the caller to release pixels memory if desired. ### Example
#### Example Output ~~~~ width: 25 height: 35 color: kRGBA_8888_SkColorType alpha: kOpaque_SkAlphaType width: 0 height: 0 color: kUnknown_SkColorType alpha: kUnknown_SkAlphaType ~~~~
### See Also SkPixmap() SkAlphaType SkColorType ---
void reset(const SkImageInfo& info, const void* addr, size_t rowBytes)
Sets width, height, SkAlphaType, and SkColorType from info. Sets pixel address from addr, which may be nullptr. Sets row bytes from rowBytes, which should be info.width() times info.bytesPerPixel(), or larger. Does not check addr. Asserts if built with SK_DEBUG defined and if rowBytes is too small to hold one row of pixels. The memory lifetime pixels are managed by the caller. When SkPixmap goes out of scope, addr is unaffected. ### Parameters
info width, height, SkAlphaType, SkColorType of SkImageInfo
addr pointer to pixels allocated by caller; may be nullptr
rowBytes size of one row of addr; width times pixel size, or larger
### Example
### See Also SkPixmap(const SkImageInfo& info, const void* addr, size_t rowBytes) reset() SkAlphaType SkColorType ---
void setColorSpace(sk_sp<SkColorSpace> colorSpace)
Changes SkColorSpace in SkImageInfo; preserves width, height, SkAlphaType, and SkColorType in SkImage, and leaves pixel address and row bytes unchanged. SkColorSpace reference count is incremented. ### Parameters
colorSpace SkColorSpace moved to SkImageInfo
### Example
#### Example Output ~~~~ is unique is not unique ~~~~
### See Also Color_Space SkImageInfo::makeColorSpace ---
bool extractSubset(SkPixmap* subset, const SkIRect& area)const
Sets subset width, height, pixel address to intersection of SkPixmap with area, if intersection is not empty; and return true. Otherwise, leave subset unchanged and return false. Failing to read the return value generates a compile time warning. ### Parameters
subset storage for width, height, pixel address of intersection
area bounds to intersect with SkPixmap
### Return Value true if intersection of SkPixmap and area is not empty ### Example
### See Also reset() SkIRect::intersect ---
const SkImageInfo& info()const
Returns width, height, SkAlphaType, SkColorType, and SkColorSpace. ### Return Value reference to SkImageInfo ### Example
#### Example Output ~~~~ width: 384 height: 384 color: BGRA_8888 alpha: Opaque ~~~~
### See Also Image_Info ---
size_t rowBytes()const
Returns row bytes, the interval from one pixel row to the next. Row bytes is at least as large as: width() * info().bytesPerPixel(). Returns zero if colorType is kUnknown_SkColorType. It is up to the Bitmap creator to ensure that row bytes is a useful value. ### Return Value byte length of pixel row ### Example
#### Example Output ~~~~ rowBytes: 2 minRowBytes: 4 rowBytes: 8 minRowBytes: 4 ~~~~
### See Also addr() info() SkImageInfo::minRowBytes ---
const void* addr()const
Returns pixel address, the base address corresponding to the pixel origin. It is up to the SkPixmap creator to ensure that pixel address is a useful value. ### Return Value pixel address ### Example
#### Example Output ~~~~ #Volatile pixels address: 0x7f2a440bb010 inset address: 0x7f2a440fb210 ~~~~
### See Also addr(int x, int y) addr8 addr16 addr32 addr64 info() rowBytes() ---
int width()const
Returns pixel count in each pixel row. Should be equal or less than: rowBytes() / info().bytesPerPixel(). ### Return Value pixel width in Image_Info ### Example
#### Example Output ~~~~ pixmap width: 16 info width: 16 ~~~~
### See Also height() SkImageInfo::width() ---
int height()const
Returns pixel row count. ### Return Value pixel height in SkImageInfo ### Example
#### Example Output ~~~~ pixmap height: 32 info height: 32 ~~~~
### See Also width SkImageInfo::height ---
SkColorType colorType()const
Returns Color_Type, one of: kUnknown_SkColorType, kAlpha_8_SkColorType, kRGB_565_SkColorType, kARGB_4444_SkColorType, kRGBA_8888_SkColorType, kRGB_888x_SkColorType, kBGRA_8888_SkColorType, kRGBA_1010102_SkColorType, kRGB_101010x_SkColorType, kGray_8_SkColorType, kRGBA_F16_SkColorType . ### Return Value Color_Type in Image_Info ### Example
#### Example Output ~~~~ color type: kAlpha_8_SkColorType ~~~~
### See Also alphaType() SkImageInfo::colorType ---
SkAlphaType alphaType()const
Returns Alpha_Type, one of: kUnknown_SkAlphaType, kOpaque_SkAlphaType, kPremul_SkAlphaType, kUnpremul_SkAlphaType . ### Return Value Alpha_Type in Image_Info ### Example
#### Example Output ~~~~ alpha type: kPremul_SkAlphaType ~~~~
### See Also colorType() SkImageInfo::alphaType ---
SkColorSpace* colorSpace()const
Returns SkColorSpace, the range of colors, associated with SkImageInfo. The reference count of SkColorSpace is unchanged. The returned SkColorSpace is immutable. ### Return Value SkColorSpace in SkImageInfo, or nullptr ### Example
SkColorSpace::MakeSRGBLinear creates Color_Space with linear gamma and an sRGB gamut. This Color_Space gamma is not close to sRGB gamma.
#### Example Output ~~~~ gammaCloseToSRGB: false gammaIsLinear: true isSRGB: false ~~~~
### See Also Color_Space SkImageInfo::colorSpace ---
bool isOpaque()const
Returns true if SkAlphaType is kOpaque_SkAlphaType. Does not check if SkColorType allows alpha, or if any pixel value has transparency. ### Return Value true if SkImageInfo has opaque SkAlphaType ### Example
isOpaque ignores whether all pixels are opaque or not.
#### Example Output ~~~~ isOpaque: false isOpaque: false isOpaque: true isOpaque: true ~~~~
### See Also computeIsOpaque SkImageInfo::isOpaque ---
SkIRect bounds()const
Returns SkIRect { 0, 0, width(), height() }. ### Return Value integral rectangle from origin to width() and height() ### Example
#### Example Output ~~~~ width: 0 height: 0 empty: true width: 0 height: 2 empty: true width: 2 height: 0 empty: true width: 2 height: 2 empty: false ~~~~
### See Also height() width() IRect ---
int rowBytesAsPixels()const
Returns number of pixels that fit on row. Should be greater than or equal to width(). ### Return Value maximum pixels per row ### Example
#### Example Output ~~~~ rowBytes: 4 rowBytesAsPixels: 1 rowBytes: 5 rowBytesAsPixels: 1 rowBytes: 6 rowBytesAsPixels: 1 rowBytes: 7 rowBytesAsPixels: 1 rowBytes: 8 rowBytesAsPixels: 2 ~~~~
### See Also rowBytes shiftPerPixel width SkImageInfo::bytesPerPixel ---
int shiftPerPixel()const
Returns bit shift converting row bytes to row pixels. Returns zero for kUnknown_SkColorType. ### Return Value one of: 0, 1, 2, 3; left shift to convert pixels to bytes ### Example
#### Example Output ~~~~ color: kUnknown_SkColorType bytesPerPixel: 0 shiftPerPixel: 0 color: kAlpha_8_SkColorType bytesPerPixel: 1 shiftPerPixel: 0 color: kRGB_565_SkColorType bytesPerPixel: 2 shiftPerPixel: 1 color: kARGB_4444_SkColorType bytesPerPixel: 2 shiftPerPixel: 1 color: kRGBA_8888_SkColorType bytesPerPixel: 4 shiftPerPixel: 2 color: kBGRA_8888_SkColorType bytesPerPixel: 4 shiftPerPixel: 2 color: kGray_8_SkColorType bytesPerPixel: 1 shiftPerPixel: 0 color: kRGBA_F16_SkColorType bytesPerPixel: 8 shiftPerPixel: 3 ~~~~
### See Also rowBytes rowBytesAsPixels width SkImageInfo::bytesPerPixel ---
size_t computeByteSize()const
Returns minimum memory required for pixel storage. Does not include unused memory on last row when rowBytesAsPixels() exceeds width(). Returns zero if result does not fit in size_t. Returns zero if height() or width() is 0. Returns height() times rowBytes() if colorType() is kUnknown_SkColorType. ### Return Value size in bytes of image buffer ### Example
#### Example Output ~~~~ width: 1 height: 1 computeByteSize: 4 width: 1 height: 1000 computeByteSize: 4999 width: 1 height: 1000000 computeByteSize: 4999999 width: 1000 height: 1 computeByteSize: 4000 width: 1000 height: 1000 computeByteSize: 4999000 width: 1000 height: 1000000 computeByteSize: 4999999000 width: 1000000 height: 1 computeByteSize: 4000000 width: 1000000 height: 1000 computeByteSize: 4999000000 width: 1000000 height: 1000000 computeByteSize: 4999999000000 ~~~~
### See Also SkImageInfo::computeByteSize ---
bool computeIsOpaque()const
Returns true if all pixels are opaque. SkColorType determines how pixels are encoded, and whether pixel describes alpha. Returns true for SkColorType without alpha in each pixel; for other SkColorType, returns true if all pixels have alpha values equivalent to 1.0 or greater. For SkColorType kRGB_565_SkColorType or kGray_8_SkColorType: always returns true. For SkColorType kAlpha_8_SkColorType, kBGRA_8888_SkColorType, kRGBA_8888_SkColorType: returns true if all pixel alpha values are 255. For SkColorType kARGB_4444_SkColorType: returns true if all pixel alpha values are 15. For kRGBA_F16_SkColorType: returns true if all pixel alpha values are 1.0 or greater. Returns false for kUnknown_SkColorType. ### Return Value true if all pixels have opaque values or SkColorType is opaque ### Example
#### Example Output ~~~~ computeIsOpaque: false computeIsOpaque: true computeIsOpaque: false computeIsOpaque: true ~~~~
### See Also isOpaque Color_Type Alpha ---
SkColor getColor(int x, int y)const
Returns pixel at (x, y) as unpremultiplied color. Returns black with alpha if SkColorType is kAlpha_8_SkColorType. Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined; and returns undefined values or may crash if SK_RELEASE is defined. Fails if SkColorType is kUnknown_SkColorType or pixel address is nullptr. SkColorSpace in SkImageInfo is ignored. Some color precision may be lost in the conversion to unpremultiplied color; original pixel data may have additional precision. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value pixel converted to unpremultiplied color ### Example
#### Example Output ~~~~ Premultiplied: (0, 0) 0x00000000 0x2a0e002a 0x55380055 0x7f7f007f (0, 1) 0x2a000e2a 0x551c1c55 0x7f542a7f 0xaaaa38aa (0, 2) 0x55003855 0x7f2a547f 0xaa7171aa 0xd4d48dd4 (0, 3) 0x7f007f7f 0xaa38aaaa 0xd48dd4d4 0xffffffff Unpremultiplied: (0, 0) 0x00000000 0x2a5500ff 0x55a800ff 0x7fff00ff (0, 1) 0x2a0055ff 0x555454ff 0x7fa954ff 0xaaff54ff (0, 2) 0x5500a8ff 0x7f54a9ff 0xaaaaaaff 0xd4ffaaff (0, 3) 0x7f00ffff 0xaa54ffff 0xd4aaffff 0xffffffff ~~~~
### See Also getAlphaf addr() readPixels ---
float getAlphaf(int x, int y)const
Looks up the pixel at (x,y) and return its alpha component, normalized to [0..1]. This is roughly equivalent to SkGetColorA(getColor()), but can be more efficient (and more precise if the pixels store more than 8 bits per component). ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value alpha converted to normalized float ### See Also getColor ---
const void* addr(int x, int y)const
Returns readable pixel address at (x, y). Returns nullptr if SkPixelRef is nullptr. Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Returns nullptr if SkColorType is kUnknown_SkColorType. Performs a lookup of pixel size; for better performance, call one of: addr8, addr16, addr32, addr64, or addrF16(). ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable generic pointer to pixel ### Example
#### Example Output ~~~~ pixmap.addr(1, 2) == &storage[1 + 2 * w] ~~~~
### See Also addr8 addr16 addr32 addr64 addrF16 getColor writable_addr SkBitmap::getAddr ---
const uint8_t* addr8()const
Returns readable base pixel address. Result is addressable as unsigned 8-bit bytes. Will trigger an assert() if SkColorType is not kAlpha_8_SkColorType or kGray_8_SkColorType, and is built with SK_DEBUG defined. One byte corresponds to one pixel. ### Return Value readable unsigned 8-bit pointer to pixels ### Example
#### Example Output ~~~~ pixmap.addr8() == storage ~~~~
### See Also addr() addr16 addr32 addr64 addrF16 getColor writable_addr writable_addr8 ---
const uint16_t* addr16()const
Returns readable base pixel address. Result is addressable as unsigned 16-bit words. Will trigger an assert() if SkColorType is not kRGB_565_SkColorType or kARGB_4444_SkColorType, and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Return Value readable unsigned 16-bit pointer to pixels ### Example
#### Example Output ~~~~ pixmap.addr16() == storage ~~~~
### See Also addr() addr8 addr32 addr64 addrF16 getColor writable_addr writable_addr16 ---
const uint32_t* addr32()const
Returns readable base pixel address. Result is addressable as unsigned 32-bit words. Will trigger an assert() if SkColorType is not kRGBA_8888_SkColorType or kBGRA_8888_SkColorType, and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Return Value readable unsigned 32-bit pointer to pixels ### Example
#### Example Output ~~~~ pixmap.addr32() == storage ~~~~
### See Also addr() addr8 addr16 addr64 addrF16 getColor writable_addr writable_addr32 ---
const uint64_t* addr64()const
Returns readable base pixel address. Result is addressable as unsigned 64-bit words. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Return Value readable unsigned 64-bit pointer to pixels ### Example
#### Example Output ~~~~ pixmap.addr64() == storage ~~~~
### See Also addr() addr8 addr16 addr32 addrF16 getColor writable_addr writable_addr64 ---
const uint16_t* addrF16()const
Returns readable base pixel address. Result is addressable as unsigned 16-bit words. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. Each word represents one color component encoded as a half float. Four words correspond to one pixel. ### Return Value readable unsigned 16-bit pointer to first component of pixels ### Example
#### Example Output ~~~~ pixmap.addrF16() == storage ~~~~
### See Also addr() addr8 addr16 addr32 addr64 getColor writable_addr writable_addrF16 ---
const uint8_t* addr8(int x, int y)const
Returns readable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Will trigger an assert() if SkColorType is not kAlpha_8_SkColorType or kGray_8_SkColorType, and is built with SK_DEBUG defined. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable unsigned 8-bit pointer to pixel at (x, y) ### Example
#### Example Output ~~~~ pixmap.addr8(1, 2) == &storage[1 + 2 * w] ~~~~
### See Also addr() addr16 addr32 addr64 addrF16 getColor writable_addr writable_addr8 ---
const uint16_t* addr16(int x, int y)const
Returns readable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Will trigger an assert() if SkColorType is not kRGB_565_SkColorType or kARGB_4444_SkColorType, and is built with SK_DEBUG defined. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable unsigned 16-bit pointer to pixel at (x, y) ### Example
#### Example Output ~~~~ pixmap.addr16(1, 2) == &storage[1 + 2 * w] ~~~~
### See Also addr() addr8 addr32 addr64 addrF16 getColor writable_addr writable_addr16 ---
const uint32_t* addr32(int x, int y)const
Returns readable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Will trigger an assert() if SkColorType is not kRGBA_8888_SkColorType or kBGRA_8888_SkColorType, and is built with SK_DEBUG defined. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable unsigned 32-bit pointer to pixel at (x, y) ### Example
#### Example Output ~~~~ pixmap.addr32(1, 2) == &storage[1 + 2 * w] ~~~~
### See Also addr() addr8 addr16 addr64 addrF16 getColor writable_addr writable_addr64 ---
const uint64_t* addr64(int x, int y)const
Returns readable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable unsigned 64-bit pointer to pixel at (x, y) ### Example
#### Example Output ~~~~ pixmap.addr64(1, 2) == &storage[1 + 2 * w] ~~~~
### See Also addr() addr8 addr16 addr32 addrF16 getColor writable_addr writable_addr64 ---
const uint16_t* addrF16(int x, int y)const
Returns readable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. Each unsigned 16-bit word represents one color component encoded as a half float. Four words correspond to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value readable unsigned 16-bit pointer to pixel component at (x, y) ### Example
#### Example Output ~~~~ pixmap.addrF16(1, 2) == &storage[1 * wordsPerPixel + 2 * rowWords] ~~~~
### See Also addr() addr8 addr16 addr32 addr64 getColor writable_addr writable_addrF16 ---
void* writable_addr()const
Returns writable base pixel address. ### Return Value writable generic base pointer to pixels ### Example
#### Example Output ~~~~ pixmap.writable_addr() == (void *)storage pixmap.getColor(0, 1) == 0x00000000 pixmap.getColor(0, 0) == 0xFFFFFFFF ~~~~
### See Also writable_addr8 writable_addr16 writable_addr32 writable_addr64 writable_addrF16 addr() ---
void* writable_addr(int x, int y)const
Returns writable pixel address at (x, y). Input is not validated: out of bounds values of x or y trigger an assert() if built with SK_DEBUG defined. Returns zero if SkColorType is kUnknown_SkColorType. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable generic pointer to pixel ### Example
#### Example Output ~~~~ pixmap.writable_addr() == (void *)storage pixmap.getColor(0, 0) == 0x00000000 pixmap.getColor(1, 2) == 0xFFFFFFFF ~~~~
### See Also writable_addr8 writable_addr16 writable_addr32 writable_addr64 writable_addrF16 addr() ---
uint8_t* writable_addr8(int x, int y)const
Returns writable pixel address at (x, y). Result is addressable as unsigned 8-bit bytes. Will trigger an assert() if SkColorType is not kAlpha_8_SkColorType or kGray_8_SkColorType, and is built with SK_DEBUG defined. One byte corresponds to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable unsigned 8-bit pointer to pixels ### Example
Altering pixels after drawing Bitmap is not guaranteed to affect subsequent drawing on all platforms. Adding a second SkBitmap::installPixels after editing pixel memory is safer.
### See Also writable_addr writable_addr16 writable_addr32 writable_addr64 writable_addrF16 addr() addr8 ---
uint16_t* writable_addr16(int x, int y)const
Returns writable_addr pixel address at (x, y). Result is addressable as unsigned 16-bit words. Will trigger an assert() if SkColorType is not kRGB_565_SkColorType or kARGB_4444_SkColorType, and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable unsigned 16-bit pointer to pixel ### Example
Draw a five by five bitmap, and draw it again with a center black pixel. The low nibble of the 16-bit word is Alpha.
### See Also writable_addr writable_addr8 writable_addr32 writable_addr64 writable_addrF16 addr() addr16 ---
uint32_t* writable_addr32(int x, int y)const
Returns writable pixel address at (x, y). Result is addressable as unsigned 32-bit words. Will trigger an assert() if SkColorType is not kRGBA_8888_SkColorType or kBGRA_8888_SkColorType, and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable unsigned 32-bit pointer to pixel ### Example
### See Also writable_addr writable_addr8 writable_addr16 writable_addr64 writable_addrF16 addr() addr32 ---
uint64_t* writable_addr64(int x, int y)const
Returns writable pixel address at (x, y). Result is addressable as unsigned 64-bit words. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. One word corresponds to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable unsigned 64-bit pointer to pixel ### Example
### See Also writable_addr writable_addr8 writable_addr16 writable_addr32 writable_addrF16 addr() addr64 ---
uint16_t* writable_addrF16(int x, int y)const
Returns writable pixel address at (x, y). Result is addressable as unsigned 16-bit words. Will trigger an assert() if SkColorType is not kRGBA_F16_SkColorType and is built with SK_DEBUG defined. Each word represents one color component encoded as a half float. Four words correspond to one pixel. ### Parameters
x column index, zero or greater, and less than width()
y row index, zero or greater, and less than height()
### Return Value writable unsigned 16-bit pointer to first component of pixel ### Example
Left bitmap is drawn with two pixels defined in half float format. Right bitmap is drawn after overwriting bottom half float color with top half float color.
### See Also writable_addr writable_addr8 writable_addr16 writable_addr32 writable_addr64 addr() addrF16 ---
bool readPixels(const SkImageInfo& dstInfo, void* dstPixels, size_t dstRowBytes)const
Copies a SkRect of pixels to dstPixels. Copy starts at (0, 0), and does not exceed SkPixmap (width(), height()). dstInfo specifies width, height, SkColorType, SkAlphaType, and SkColorSpace of destination. dstRowBytes specifics the gap from one destination row to the next. Returns true if pixels are copied. Returns false if dstInfo address equals nullptr, or dstRowBytes is less than dstInfo.minRowBytes(). Pixels are copied only if pixel conversion is possible. If SkPixmap colorType() is kGray_8_SkColorType, or kAlpha_8_SkColorType; dstInfo.colorType() must match. If SkPixmap colorType() is kGray_8_SkColorType, dstInfo.colorSpace() must match. If SkPixmap alphaType() is kOpaque_SkAlphaType, dstInfo.alphaType() must match. If SkPixmap colorSpace() is nullptr, dstInfo.colorSpace() must match. Returns false if pixel conversion is not possible. Returns false if SkPixmap width() or height() is zero or negative. ### Parameters
dstInfo destination width, height, SkColorType, SkAlphaType, SkColorSpace
dstPixels destination pixel storage
dstRowBytes destination row length
### Return Value true if pixels are copied to dstPixels ### Example
Transferring the gradient from 8 bits per component to 4 bits per component creates visible banding.
### See Also erase SkBitmap::readPixels SkCanvas::drawBitmap SkCanvas::readPixels SkImage::readPixels SkSurface::readPixels ---
bool readPixels(const SkImageInfo& dstInfo, void* dstPixels, size_t dstRowBytes, int srcX, int srcY)const
Copies a Rect of pixels to dstPixels. Copy starts at (srcX, srcY), and does not exceed Pixmap (width(), height()). dstInfo specifies width, height, Color_Type, Alpha_Type, and Color_Space of destination. dstRowBytes specifics the gap from one destination row to the next. Returns true if pixels are copied. Returns false if dstInfo has no address, or dstRowBytes is less than dstInfo.minRowBytes(). Pixels are copied only if pixel conversion is possible. If Pixmap colorType is kGray_8_SkColorType, or kAlpha_8_SkColorType; dstInfo.colorType() must match. If Pixmap colorType is kGray_8_SkColorType, dstInfo.colorSpace() must match. If Pixmap alphaType is kOpaque_SkAlphaType, dstInfo.alphaType() must match. If Pixmap colorSpace is nullptr, dstInfo.colorSpace() must match. Returns false if pixel conversion is not possible. srcX and srcY may be negative to copy only top or left of source. Returns false if Pixmap width() or height() is zero or negative. Returns false if: abs(srcX) >= Pixmap width(), or if abs(srcY) >= Pixmap height(). ### Parameters
dstInfo destination width, height, Color_Type, Alpha_Type, Color_Space
dstPixels destination pixel storage
dstRowBytes destination row length
srcX column index whose absolute value is less than width()
srcY row index whose absolute value is less than height()
### Return Value true if pixels are copied to dstPixels ### Example
### See Also erase SkBitmap::readPixels SkCanvas::drawBitmap SkCanvas::readPixels SkImage::readPixels SkSurface::readPixels ---
bool readPixels(const SkPixmap& dst, int srcX, int srcY)const
Copies a Rect of pixels to dst. Copy starts at (srcX, srcY), and does not exceed Pixmap (width(), height()). dst specifies width, height, Color_Type, Alpha_Type, and Color_Space of destination. Returns true if pixels are copied. Returns false if dst.addr() equals nullptr, or dst.rowBytes() is less than dst SkImageInfo::minRowBytes. Pixels are copied only if pixel conversion is possible. If Pixmap colorType is kGray_8_SkColorType, or kAlpha_8_SkColorType; dst.info().colorType() must match. If Pixmap colorType is kGray_8_SkColorType, dst.info().colorSpace() must match. If Pixmap alphaType is kOpaque_SkAlphaType, dst.info().alphaType() must match. If Pixmap colorSpace is nullptr, dst.info().colorSpace() must match. Returns false if pixel conversion is not possible. srcX and srcY may be negative to copy only top or left of source. Returns false Pixmap width() or height() is zero or negative. Returns false if: abs(srcX) >= Pixmap width(), or if abs(srcY) >= Pixmap height(). ### Parameters
dst Image_Info and pixel address to write to
srcX column index whose absolute value is less than width()
srcY row index whose absolute value is less than height()
### Return Value true if pixels are copied to dst ### Example
### See Also erase SkBitmap::readPixels SkCanvas::drawBitmap SkCanvas::readPixels SkImage::readPixels SkSurface::readPixels ---
bool readPixels(const SkPixmap& dst)const
Copies pixels inside bounds() to dst. dst specifies width, height, SkColorType, SkAlphaType, and SkColorSpace of destination. Returns true if pixels are copied. Returns false if dst address equals nullptr, or dst.rowBytes() is less than dst SkImageInfo::minRowBytes. Pixels are copied only if pixel conversion is possible. If SkPixmap colorType() is kGray_8_SkColorType, or kAlpha_8_SkColorType; dst SkColorType must match. If SkPixmap colorType() is kGray_8_SkColorType, dst SkColorSpace must match. If SkPixmap alphaType() is kOpaque_SkAlphaType, dst SkAlphaType must match. If SkPixmap colorSpace() is nullptr, dst SkColorSpace must match. Returns false if pixel conversion is not possible. Returns false if SkPixmap width() or height() is zero or negative. ### Parameters
dst SkImageInfo and pixel address to write to
### Return Value true if pixels are copied to dst ### Example
### See Also erase SkBitmap::readPixels SkCanvas::drawBitmap SkCanvas::readPixels SkImage::readPixels SkSurface::readPixels ---
bool scalePixels(const SkPixmap& dst, SkFilterQuality filterQuality)const
Copies SkBitmap to dst, scaling pixels to fit dst.width() and dst.height(), and converting pixels to match dst.colorType() and dst.alphaType(). Returns true if pixels are copied. Returns false if dst address is nullptr, or dst.rowBytes() is less than dst SkImageInfo::minRowBytes. Pixels are copied only if pixel conversion is possible. If SkPixmap colorType() is kGray_8_SkColorType, or kAlpha_8_SkColorType; dst SkColorType must match. If SkPixmap colorType() is kGray_8_SkColorType, dst SkColorSpace must match. If SkPixmap alphaType() is kOpaque_SkAlphaType, dst SkAlphaType must match. If SkPixmap colorSpace() is nullptr, dst SkColorSpace must match. Returns false if pixel conversion is not possible. Returns false if SkBitmap width() or height() is zero or negative. Scales the image, with filterQuality, to match dst.width() and dst.height(). filterQuality kNone_SkFilterQuality is fastest, typically implemented with nearest neighbor filter. kLow_SkFilterQuality is typically implemented with bilerp filter. kMedium_SkFilterQuality is typically implemented with bilerp filter, and mip-map filter when size is reduced. kHigh_SkFilterQuality is slowest, typically implemented with bicubic filter. ### Parameters
dst SkImageInfo and pixel address to write to
filterQuality one of: kNone_SkFilterQuality, kLow_SkFilterQuality,
kMedium_SkFilterQuality, kHigh_SkFilterQuality ### Return Value true if pixels are scaled to fit dst ### Example
### See Also SkCanvas::drawBitmap SkImage::scalePixels ---
bool erase(SkColor color, const SkIRect& subset)const
Writes color to pixels bounded by subset; returns true on success. Returns false if colorType() is kUnknown_SkColorType, or if subset does not intersect bounds(). ### Parameters
color unpremultiplied color to write
subset bounding integer SkRect of written pixels
### Return Value true if pixels are changed ### Example
### See Also SkBitmap::erase SkCanvas::clear SkCanvas::drawColor ---
bool erase(SkColor color)const
Writes color to pixels inside bounds(); returns true on success. Returns false if colorType() is kUnknown_SkColorType, or if bounds() is empty. ### Parameters
color unpremultiplied color to write
### Return Value true if pixels are changed ### Example
### See Also SkBitmap::erase SkCanvas::clear SkCanvas::drawColor ---
bool erase(const SkColor4f& color, const SkIRect* subset = nullptr)const
Writes color to pixels bounded by subset; returns true on success. if subset is nullptr, writes colors pixels inside bounds(). Returns false if colorType() is kUnknown_SkColorType, if subset is not nullptr and does not intersect bounds(), or if subset is nullptr and bounds() is empty. ### Parameters
color unpremultiplied color to write
subset bounding integer SkRect of pixels to write; may be nullptr
### Return Value true if pixels are changed ### Example
### See Also SkBitmap::erase SkCanvas::clear SkCanvas::drawColor