/*
 * Copyright 2018 Google Inc.
 *
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

#include "SkContourMeasure.h"
#include "SkPathMeasurePriv.h"
#include "SkGeometry.h"
#include "SkPath.h"
#include "SkTSearch.h"

#define kMaxTValue  0x3FFFFFFF

static inline SkScalar tValue2Scalar(int t) {
    SkASSERT((unsigned)t <= kMaxTValue);
    const SkScalar kMaxTReciprocal = 1.0f / kMaxTValue;
    return t * kMaxTReciprocal;
}

SkScalar SkContourMeasure::Segment::getScalarT() const {
    return tValue2Scalar(fTValue);
}

void SkContourMeasure_segTo(const SkPoint pts[], unsigned segType,
                            SkScalar startT, SkScalar stopT, SkPath* dst) {
    SkASSERT(startT >= 0 && startT <= SK_Scalar1);
    SkASSERT(stopT >= 0 && stopT <= SK_Scalar1);
    SkASSERT(startT <= stopT);

    if (startT == stopT) {
        if (!dst->isEmpty()) {
            /* if the dash as a zero-length on segment, add a corresponding zero-length line.
               The stroke code will add end caps to zero length lines as appropriate */
            SkPoint lastPt;
            SkAssertResult(dst->getLastPt(&lastPt));
            dst->lineTo(lastPt);
        }
        return;
    }

    SkPoint tmp0[7], tmp1[7];

    switch (segType) {
        case kLine_SegType:
            if (SK_Scalar1 == stopT) {
                dst->lineTo(pts[1]);
            } else {
                dst->lineTo(SkScalarInterp(pts[0].fX, pts[1].fX, stopT),
                            SkScalarInterp(pts[0].fY, pts[1].fY, stopT));
            }
            break;
        case kQuad_SegType:
            if (0 == startT) {
                if (SK_Scalar1 == stopT) {
                    dst->quadTo(pts[1], pts[2]);
                } else {
                    SkChopQuadAt(pts, tmp0, stopT);
                    dst->quadTo(tmp0[1], tmp0[2]);
                }
            } else {
                SkChopQuadAt(pts, tmp0, startT);
                if (SK_Scalar1 == stopT) {
                    dst->quadTo(tmp0[3], tmp0[4]);
                } else {
                    SkChopQuadAt(&tmp0[2], tmp1, (stopT - startT) / (1 - startT));
                    dst->quadTo(tmp1[1], tmp1[2]);
                }
            }
            break;
        case kConic_SegType: {
            SkConic conic(pts[0], pts[2], pts[3], pts[1].fX);

            if (0 == startT) {
                if (SK_Scalar1 == stopT) {
                    dst->conicTo(conic.fPts[1], conic.fPts[2], conic.fW);
                } else {
                    SkConic tmp[2];
                    if (conic.chopAt(stopT, tmp)) {
                        dst->conicTo(tmp[0].fPts[1], tmp[0].fPts[2], tmp[0].fW);
                    }
                }
            } else {
                if (SK_Scalar1 == stopT) {
                    SkConic tmp1[2];
                    if (conic.chopAt(startT, tmp1)) {
                        dst->conicTo(tmp1[1].fPts[1], tmp1[1].fPts[2], tmp1[1].fW);
                    }
                } else {
                    SkConic tmp;
                    conic.chopAt(startT, stopT, &tmp);
                    dst->conicTo(tmp.fPts[1], tmp.fPts[2], tmp.fW);
                }
            }
        } break;
        case kCubic_SegType:
            if (0 == startT) {
                if (SK_Scalar1 == stopT) {
                    dst->cubicTo(pts[1], pts[2], pts[3]);
                } else {
                    SkChopCubicAt(pts, tmp0, stopT);
                    dst->cubicTo(tmp0[1], tmp0[2], tmp0[3]);
                }
            } else {
                SkChopCubicAt(pts, tmp0, startT);
                if (SK_Scalar1 == stopT) {
                    dst->cubicTo(tmp0[4], tmp0[5], tmp0[6]);
                } else {
                    SkChopCubicAt(&tmp0[3], tmp1, (stopT - startT) / (1 - startT));
                    dst->cubicTo(tmp1[1], tmp1[2], tmp1[3]);
                }
            }
            break;
        default:
            SK_ABORT("unknown segType");
    }
}

///////////////////////////////////////////////////////////////////////////////

static inline int tspan_big_enough(int tspan) {
    SkASSERT((unsigned)tspan <= kMaxTValue);
    return tspan >> 10;
}

// can't use tangents, since we need [0..1..................2] to be seen
// as definitely not a line (it is when drawn, but not parametrically)
// so we compare midpoints
#define CHEAP_DIST_LIMIT    (SK_Scalar1/2)  // just made this value up

static bool quad_too_curvy(const SkPoint pts[3], SkScalar tolerance) {
    // diff = (a/4 + b/2 + c/4) - (a/2 + c/2)
    // diff = -a/4 + b/2 - c/4
    SkScalar dx = SkScalarHalf(pts[1].fX) -
                        SkScalarHalf(SkScalarHalf(pts[0].fX + pts[2].fX));
    SkScalar dy = SkScalarHalf(pts[1].fY) -
                        SkScalarHalf(SkScalarHalf(pts[0].fY + pts[2].fY));

    SkScalar dist = SkMaxScalar(SkScalarAbs(dx), SkScalarAbs(dy));
    return dist > tolerance;
}

static bool conic_too_curvy(const SkPoint& firstPt, const SkPoint& midTPt,
                            const SkPoint& lastPt, SkScalar tolerance) {
    SkPoint midEnds = firstPt + lastPt;
    midEnds *= 0.5f;
    SkVector dxy = midTPt - midEnds;
    SkScalar dist = SkMaxScalar(SkScalarAbs(dxy.fX), SkScalarAbs(dxy.fY));
    return dist > tolerance;
}

static bool cheap_dist_exceeds_limit(const SkPoint& pt, SkScalar x, SkScalar y,
                                     SkScalar tolerance) {
    SkScalar dist = SkMaxScalar(SkScalarAbs(x - pt.fX), SkScalarAbs(y - pt.fY));
    // just made up the 1/2
    return dist > tolerance;
}

static bool cubic_too_curvy(const SkPoint pts[4], SkScalar tolerance) {
    return  cheap_dist_exceeds_limit(pts[1],
                         SkScalarInterp(pts[0].fX, pts[3].fX, SK_Scalar1/3),
                         SkScalarInterp(pts[0].fY, pts[3].fY, SK_Scalar1/3), tolerance)
                         ||
            cheap_dist_exceeds_limit(pts[2],
                         SkScalarInterp(pts[0].fX, pts[3].fX, SK_Scalar1*2/3),
                         SkScalarInterp(pts[0].fY, pts[3].fY, SK_Scalar1*2/3), tolerance);
}

SkScalar SkContourMeasureIter::compute_quad_segs(const SkPoint pts[3], SkScalar distance,
                                                 int mint, int maxt, unsigned ptIndex) {
    if (tspan_big_enough(maxt - mint) && quad_too_curvy(pts, fTolerance)) {
        SkPoint tmp[5];
        int     halft = (mint + maxt) >> 1;

        SkChopQuadAtHalf(pts, tmp);
        distance = this->compute_quad_segs(tmp, distance, mint, halft, ptIndex);
        distance = this->compute_quad_segs(&tmp[2], distance, halft, maxt, ptIndex);
    } else {
        SkScalar d = SkPoint::Distance(pts[0], pts[2]);
        SkScalar prevD = distance;
        distance += d;
        if (distance > prevD) {
            SkASSERT(ptIndex < (unsigned)fPts.count());
            SkContourMeasure::Segment* seg = fSegments.append();
            seg->fDistance = distance;
            seg->fPtIndex = ptIndex;
            seg->fType = kQuad_SegType;
            seg->fTValue = maxt;
        }
    }
    return distance;
}

SkScalar SkContourMeasureIter::compute_conic_segs(const SkConic& conic, SkScalar distance,
                                                  int mint, const SkPoint& minPt,
                                                  int maxt, const SkPoint& maxPt,
                                                  unsigned ptIndex) {
    int halft = (mint + maxt) >> 1;
    SkPoint halfPt = conic.evalAt(tValue2Scalar(halft));
    if (!halfPt.isFinite()) {
        return distance;
    }
    if (tspan_big_enough(maxt - mint) && conic_too_curvy(minPt, halfPt, maxPt, fTolerance)) {
        distance = this->compute_conic_segs(conic, distance, mint, minPt, halft, halfPt, ptIndex);
        distance = this->compute_conic_segs(conic, distance, halft, halfPt, maxt, maxPt, ptIndex);
    } else {
        SkScalar d = SkPoint::Distance(minPt, maxPt);
        SkScalar prevD = distance;
        distance += d;
        if (distance > prevD) {
            SkASSERT(ptIndex < (unsigned)fPts.count());
            SkContourMeasure::Segment* seg = fSegments.append();
            seg->fDistance = distance;
            seg->fPtIndex = ptIndex;
            seg->fType = kConic_SegType;
            seg->fTValue = maxt;
        }
    }
    return distance;
}

SkScalar SkContourMeasureIter::compute_cubic_segs(const SkPoint pts[4], SkScalar distance,
                                                  int mint, int maxt, unsigned ptIndex) {
    if (tspan_big_enough(maxt - mint) && cubic_too_curvy(pts, fTolerance)) {
        SkPoint tmp[7];
        int     halft = (mint + maxt) >> 1;

        SkChopCubicAtHalf(pts, tmp);
        distance = this->compute_cubic_segs(tmp, distance, mint, halft, ptIndex);
        distance = this->compute_cubic_segs(&tmp[3], distance, halft, maxt, ptIndex);
    } else {
        SkScalar d = SkPoint::Distance(pts[0], pts[3]);
        SkScalar prevD = distance;
        distance += d;
        if (distance > prevD) {
            SkASSERT(ptIndex < (unsigned)fPts.count());
            SkContourMeasure::Segment* seg = fSegments.append();
            seg->fDistance = distance;
            seg->fPtIndex = ptIndex;
            seg->fType = kCubic_SegType;
            seg->fTValue = maxt;
        }
    }
    return distance;
}

SkScalar SkContourMeasureIter::compute_line_seg(SkPoint p0, SkPoint p1, SkScalar distance,
                                                unsigned ptIndex) {
    SkScalar d = SkPoint::Distance(p0, p1);
    SkASSERT(d >= 0);
    SkScalar prevD = distance;
    distance += d;
    if (distance > prevD) {
        SkASSERT((unsigned)ptIndex < (unsigned)fPts.count());
        SkContourMeasure::Segment* seg = fSegments.append();
        seg->fDistance = distance;
        seg->fPtIndex = ptIndex;
        seg->fType = kLine_SegType;
        seg->fTValue = kMaxTValue;
    }
    return distance;
}

SkContourMeasure* SkContourMeasureIter::buildSegments() {
    SkPoint     pts[4];
    int         ptIndex = -1;
    SkScalar    distance = 0;
    bool        haveSeenClose = fForceClosed;
    bool        haveSeenMoveTo = false;

    /*  Note:
     *  as we accumulate distance, we have to check that the result of +=
     *  actually made it larger, since a very small delta might be > 0, but
     *  still have no effect on distance (if distance >>> delta).
     *
     *  We do this check below, and in compute_quad_segs and compute_cubic_segs
     */

    fSegments.reset();
    fPts.reset();

    bool done = false;
    do {
        if (haveSeenMoveTo && fIter.peek() == SkPath::kMove_Verb) {
            break;
        }
        switch (fIter.next(pts)) {
            case SkPath::kMove_Verb:
                ptIndex += 1;
                fPts.append(1, pts);
                SkASSERT(!haveSeenMoveTo);
                haveSeenMoveTo = true;
                break;

            case SkPath::kLine_Verb: {
                SkASSERT(haveSeenMoveTo);
                SkScalar prevD = distance;
                distance = this->compute_line_seg(pts[0], pts[1], distance, ptIndex);
                if (distance > prevD) {
                    fPts.append(1, pts + 1);
                    ptIndex++;
                }
            } break;

            case SkPath::kQuad_Verb: {
                SkASSERT(haveSeenMoveTo);
                SkScalar prevD = distance;
                distance = this->compute_quad_segs(pts, distance, 0, kMaxTValue, ptIndex);
                if (distance > prevD) {
                    fPts.append(2, pts + 1);
                    ptIndex += 2;
                }
            } break;

            case SkPath::kConic_Verb: {
                SkASSERT(haveSeenMoveTo);
                const SkConic conic(pts, fIter.conicWeight());
                SkScalar prevD = distance;
                distance = this->compute_conic_segs(conic, distance, 0, conic.fPts[0],
                                                    kMaxTValue, conic.fPts[2], ptIndex);
                if (distance > prevD) {
                    // we store the conic weight in our next point, followed by the last 2 pts
                    // thus to reconstitue a conic, you'd need to say
                    // SkConic(pts[0], pts[2], pts[3], weight = pts[1].fX)
                    fPts.append()->set(conic.fW, 0);
                    fPts.append(2, pts + 1);
                    ptIndex += 3;
                }
            } break;

            case SkPath::kCubic_Verb: {
                SkASSERT(haveSeenMoveTo);
                SkScalar prevD = distance;
                distance = this->compute_cubic_segs(pts, distance, 0, kMaxTValue, ptIndex);
                if (distance > prevD) {
                    fPts.append(3, pts + 1);
                    ptIndex += 3;
                }
            } break;

            case SkPath::kClose_Verb:
                haveSeenClose = true;
                break;

            case SkPath::kDone_Verb:
                done = true;
                break;
        }

    } while (!done);

    if (!SkScalarIsFinite(distance)) {
        return nullptr;
    }
    if (fSegments.count() == 0) {
        return nullptr;
    }

    // Handle the close segment ourselves, since we're using RawIter
    if (haveSeenClose) {
        SkScalar prevD = distance;
        SkPoint firstPt = fPts[0];
        distance = this->compute_line_seg(fPts[ptIndex], firstPt, distance, ptIndex);
        if (distance > prevD) {
            *fPts.append() = firstPt;
        }
    }

#ifdef SK_DEBUG
    {
        const SkContourMeasure::Segment* seg = fSegments.begin();
        const SkContourMeasure::Segment* stop = fSegments.end();
        unsigned        ptIndex = 0;
        SkScalar        distance = 0;
        // limit the loop to a reasonable number; pathological cases can run for minutes
        int             maxChecks = 10000000;  // set to INT_MAX to defeat the check
        while (seg < stop) {
            SkASSERT(seg->fDistance > distance);
            SkASSERT(seg->fPtIndex >= ptIndex);
            SkASSERT(seg->fTValue > 0);

            const SkContourMeasure::Segment* s = seg;
            while (s < stop - 1 && s[0].fPtIndex == s[1].fPtIndex && --maxChecks > 0) {
                SkASSERT(s[0].fType == s[1].fType);
                SkASSERT(s[0].fTValue < s[1].fTValue);
                s += 1;
            }

            distance = seg->fDistance;
            ptIndex = seg->fPtIndex;
            seg += 1;
        }
    //  SkDebugf("\n");
    }
#endif

    return new SkContourMeasure(std::move(fSegments), std::move(fPts), distance, haveSeenClose);
}

static void compute_pos_tan(const SkPoint pts[], unsigned segType,
                            SkScalar t, SkPoint* pos, SkVector* tangent) {
    switch (segType) {
        case kLine_SegType:
            if (pos) {
                pos->set(SkScalarInterp(pts[0].fX, pts[1].fX, t),
                         SkScalarInterp(pts[0].fY, pts[1].fY, t));
            }
            if (tangent) {
                tangent->setNormalize(pts[1].fX - pts[0].fX, pts[1].fY - pts[0].fY);
            }
            break;
        case kQuad_SegType:
            SkEvalQuadAt(pts, t, pos, tangent);
            if (tangent) {
                tangent->normalize();
            }
            break;
        case kConic_SegType: {
            SkConic(pts[0], pts[2], pts[3], pts[1].fX).evalAt(t, pos, tangent);
            if (tangent) {
                tangent->normalize();
            }
        } break;
        case kCubic_SegType:
            SkEvalCubicAt(pts, t, pos, tangent, nullptr);
            if (tangent) {
                tangent->normalize();
            }
            break;
        default:
            SkDEBUGFAIL("unknown segType");
    }
}


////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////

SkContourMeasureIter::SkContourMeasureIter() {
    fTolerance = CHEAP_DIST_LIMIT;
    fForceClosed = false;
}

SkContourMeasureIter::SkContourMeasureIter(const SkPath& path, bool forceClosed,
                                           SkScalar resScale) {
    fPath = path.isFinite() ? path : SkPath();
    fTolerance = CHEAP_DIST_LIMIT * SkScalarInvert(resScale);
    fForceClosed = forceClosed;

    fIter.setPath(fPath);
}

SkContourMeasureIter::~SkContourMeasureIter() {}

/** Assign a new path, or null to have none.
*/
void SkContourMeasureIter::reset(const SkPath& path, bool forceClosed, SkScalar resScale) {
    if (path.isFinite()) {
        fPath = path;
    } else {
        fPath.reset();
    }
    fForceClosed = forceClosed;

    fIter.setPath(fPath);
    fSegments.reset();
    fPts.reset();
}

sk_sp<SkContourMeasure> SkContourMeasureIter::next() {
    while (fIter.peek() != SkPath::kDone_Verb) {
        auto cm = this->buildSegments();
        if (cm) {
            return sk_sp<SkContourMeasure>(cm);
        }
    }
    return nullptr;
}

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

SkContourMeasure::SkContourMeasure(SkTDArray<Segment>&& segs, SkTDArray<SkPoint>&& pts, SkScalar length, bool isClosed)
    : fSegments(std::move(segs))
    , fPts(std::move(pts))
    , fLength(length)
    , fIsClosed(isClosed)
    {}

template <typename T, typename K>
int SkTKSearch(const T base[], int count, const K& key) {
    SkASSERT(count >= 0);
    if (count <= 0) {
        return ~0;
    }

    SkASSERT(base != nullptr); // base may be nullptr if count is zero

    unsigned lo = 0;
    unsigned hi = count - 1;

    while (lo < hi) {
        unsigned mid = (hi + lo) >> 1;
        if (base[mid].fDistance < key) {
            lo = mid + 1;
        } else {
            hi = mid;
        }
    }

    if (base[hi].fDistance < key) {
        hi += 1;
        hi = ~hi;
    } else if (key < base[hi].fDistance) {
        hi = ~hi;
    }
    return hi;
}

const SkContourMeasure::Segment* SkContourMeasure::distanceToSegment( SkScalar distance,
                                                                     SkScalar* t) const {
    SkDEBUGCODE(SkScalar length = ) this->length();
    SkASSERT(distance >= 0 && distance <= length);

    const Segment*  seg = fSegments.begin();
    int             count = fSegments.count();

    int index = SkTKSearch<Segment, SkScalar>(seg, count, distance);
    // don't care if we hit an exact match or not, so we xor index if it is negative
    index ^= (index >> 31);
    seg = &seg[index];

    // now interpolate t-values with the prev segment (if possible)
    SkScalar    startT = 0, startD = 0;
    // check if the prev segment is legal, and references the same set of points
    if (index > 0) {
        startD = seg[-1].fDistance;
        if (seg[-1].fPtIndex == seg->fPtIndex) {
            SkASSERT(seg[-1].fType == seg->fType);
            startT = seg[-1].getScalarT();
        }
    }

    SkASSERT(seg->getScalarT() > startT);
    SkASSERT(distance >= startD);
    SkASSERT(seg->fDistance > startD);

    *t = startT + (seg->getScalarT() - startT) * (distance - startD) / (seg->fDistance - startD);
    return seg;
}

bool SkContourMeasure::getPosTan(SkScalar distance, SkPoint* pos, SkVector* tangent) const {
    if (SkScalarIsNaN(distance)) {
        return false;
    }

    const SkScalar length = this->length();
    SkASSERT(length > 0 && fSegments.count() > 0);

    // pin the distance to a legal range
    if (distance < 0) {
        distance = 0;
    } else if (distance > length) {
        distance = length;
    }

    SkScalar        t;
    const Segment*  seg = this->distanceToSegment(distance, &t);
    if (SkScalarIsNaN(t)) {
        return false;
    }

    SkASSERT((unsigned)seg->fPtIndex < (unsigned)fPts.count());
    compute_pos_tan(&fPts[seg->fPtIndex], seg->fType, t, pos, tangent);
    return true;
}

bool SkContourMeasure::getMatrix(SkScalar distance, SkMatrix* matrix, MatrixFlags flags) const {
    SkPoint     position;
    SkVector    tangent;

    if (this->getPosTan(distance, &position, &tangent)) {
        if (matrix) {
            if (flags & kGetTangent_MatrixFlag) {
                matrix->setSinCos(tangent.fY, tangent.fX, 0, 0);
            } else {
                matrix->reset();
            }
            if (flags & kGetPosition_MatrixFlag) {
                matrix->postTranslate(position.fX, position.fY);
            }
        }
        return true;
    }
    return false;
}

bool SkContourMeasure::getSegment(SkScalar startD, SkScalar stopD, SkPath* dst,
                                  bool startWithMoveTo) const {
    SkASSERT(dst);

    SkScalar length = this->length();    // ensure we have built our segments

    if (startD < 0) {
        startD = 0;
    }
    if (stopD > length) {
        stopD = length;
    }
    if (!(startD <= stopD)) {   // catch NaN values as well
        return false;
    }
    if (!fSegments.count()) {
        return false;
    }

    SkPoint  p;
    SkScalar startT, stopT;
    const Segment* seg = this->distanceToSegment(startD, &startT);
    if (!SkScalarIsFinite(startT)) {
        return false;
    }
    const Segment* stopSeg = this->distanceToSegment(stopD, &stopT);
    if (!SkScalarIsFinite(stopT)) {
        return false;
    }
    SkASSERT(seg <= stopSeg);
    if (startWithMoveTo) {
        compute_pos_tan(&fPts[seg->fPtIndex], seg->fType, startT, &p, nullptr);
        dst->moveTo(p);
    }

    if (seg->fPtIndex == stopSeg->fPtIndex) {
        SkContourMeasure_segTo(&fPts[seg->fPtIndex], seg->fType, startT, stopT, dst);
    } else {
        do {
            SkContourMeasure_segTo(&fPts[seg->fPtIndex], seg->fType, startT, SK_Scalar1, dst);
            seg = SkContourMeasure::Segment::Next(seg);
            startT = 0;
        } while (seg->fPtIndex < stopSeg->fPtIndex);
        SkContourMeasure_segTo(&fPts[seg->fPtIndex], seg->fType, 0, stopT, dst);
    }

    return true;
}