/* * Copyright 2014, The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #define LOG_TAG "AudioSPDIF" #include #include #include #include "AC3FrameScanner.h" namespace android { // These values are from the AC3 spec. Do not change them. const uint8_t AC3FrameScanner::kSyncBytes[] = { 0x0B, 0x77 }; const uint16_t AC3FrameScanner::kAC3SampleRateTable[AC3_NUM_SAMPLE_RATE_TABLE_ENTRIES] = { 48000, 44100, 32000 }; // Table contains number of 16-bit words in an AC3 frame. // From AC3 spec table 5.13 const uint16_t AC3FrameScanner::kAC3FrameSizeTable[AC3_NUM_FRAME_SIZE_TABLE_ENTRIES] [AC3_NUM_SAMPLE_RATE_TABLE_ENTRIES] = { { 64, 69, 96 }, { 64, 70, 96 }, { 80, 87, 120 }, { 80, 88, 120 }, { 96, 104, 144 }, { 96, 105, 144 }, { 112, 121, 168 }, { 112, 122, 168 }, { 128, 139, 192 }, { 128, 140, 192 }, { 160, 174, 240 }, { 160, 175, 240 }, { 192, 208, 288 }, { 192, 209, 288 }, { 224, 243, 336 }, { 224, 244, 336 }, { 256, 278, 384 }, { 256, 279, 384 }, { 320, 348, 480 }, { 320, 349, 480 }, { 384, 417, 576 }, { 384, 418, 576 }, { 448, 487, 672 }, { 448, 488, 672 }, { 512, 557, 768 }, { 512, 558, 768 }, { 640, 696, 960 }, { 640, 697, 960 }, { 768, 835, 1152 }, { 768, 836, 1152 }, { 896, 975, 1344 }, { 896, 976, 1344 }, { 1024, 1114, 1536 }, { 1024, 1115, 1536 }, { 1152, 1253, 1728 }, { 1152, 1254, 1728 }, { 1280, 1393, 1920 }, { 1280, 1394, 1920 } }; const uint16_t AC3FrameScanner::kEAC3ReducedSampleRateTable[AC3_NUM_SAMPLE_RATE_TABLE_ENTRIES] = { 24000, 22050, 16000 }; const uint16_t AC3FrameScanner::kEAC3BlocksPerFrameTable[EAC3_NUM_BLOCKS_PER_FRAME_TABLE_ENTRIES] = { 1, 2, 3, 6 }; // Defined in IEC61937-2 #define SPDIF_DATA_TYPE_AC3 1 #define SPDIF_DATA_TYPE_E_AC3 21 #define AC3_STREAM_TYPE_0 0 #define AC3_STREAM_TYPE_1 1 #define AC3_STREAM_TYPE_2 2 // ----------------------------------------------------------------------------- // Scanner for AC3 byte streams. AC3FrameScanner::AC3FrameScanner(audio_format_t format) : FrameScanner(SPDIF_DATA_TYPE_AC3, AC3FrameScanner::kSyncBytes, sizeof(AC3FrameScanner::kSyncBytes), 6) , mStreamType(0) , mSubstreamID(0) , mFormat(format) { mAudioBlocksPerSyncFrame = 6; memset(mSubstreamBlockCounts, 0, sizeof(mSubstreamBlockCounts)); } AC3FrameScanner::~AC3FrameScanner() { } int AC3FrameScanner::getSampleFramesPerSyncFrame() const { return mRateMultiplier * AC3_MAX_BLOCKS_PER_SYNC_FRAME_BLOCK * AC3_PCM_FRAMES_PER_BLOCK; } void AC3FrameScanner::resetBurst() { for (int i = 0; i < EAC3_MAX_SUBSTREAMS; i++) { if (mSubstreamBlockCounts[i] >= AC3_MAX_BLOCKS_PER_SYNC_FRAME_BLOCK) { mSubstreamBlockCounts[i] -= AC3_MAX_BLOCKS_PER_SYNC_FRAME_BLOCK; } else if (mSubstreamBlockCounts[i] > 0) { ALOGW("EAC3 substream[%d] has only %d audio blocks!", i, mSubstreamBlockCounts[i]); mSubstreamBlockCounts[i] = 0; } } } // Per IEC 61973-3:5.3.3, for E-AC3 burst-length shall be in bytes. uint16_t AC3FrameScanner::convertBytesToLengthCode(uint16_t numBytes) const { return (mDataType == SPDIF_DATA_TYPE_E_AC3) ? numBytes : numBytes * 8; } // per IEC 61973-3 Paragraph 5.3.3 // We have to send 6 audio blocks on all active substreams. // Substream zero must be the first. // We don't know if we have all the blocks we need until we see // the 7th block of substream#0. bool AC3FrameScanner::isFirstInBurst() { if (mDataType == SPDIF_DATA_TYPE_E_AC3) { if (((mStreamType == AC3_STREAM_TYPE_0) || (mStreamType == AC3_STREAM_TYPE_2)) && (mSubstreamID == 0) // The ">" is intentional. We have to see the beginning // of the block in the next burst before we can send // the current burst. && (mSubstreamBlockCounts[0] > AC3_MAX_BLOCKS_PER_SYNC_FRAME_BLOCK)) { return true; } } return false; } bool AC3FrameScanner::isLastInBurst() { // For EAC3 we don't know if we are the end until we see a // frame that must be at the beginning. See isFirstInBurst(). return (mDataType != SPDIF_DATA_TYPE_E_AC3); // Just one AC3 frame per burst. } // TODO Use BitFieldParser // Parse AC3 header. // Detect whether the stream is AC3 or EAC3. Extract data depending on type. // // @return true if valid bool AC3FrameScanner::parseHeader() { // Interpret bsid based on paragraph E2.3.1.6 of EAC3 spec. uint32_t bsid = mHeaderBuffer[5] >> 3; // bitstream ID // Check BSID to see if this is EAC3 or regular AC3. // These arbitrary BSID numbers do not have any names in the spec. if ((bsid > 10) && (bsid <= 16)) { mDataType = SPDIF_DATA_TYPE_E_AC3; } else if (bsid <= 8) { mDataType = SPDIF_DATA_TYPE_AC3; } else { ALOGW("AC3 bsid = %d not supported", bsid); return false; } // bitstream mode, main, commentary, etc. uint32_t bsmod = mHeaderBuffer[5] & 7; mDataTypeInfo = bsmod; // as per IEC61937-3, table 3. // The names fscod, frmsiz are from the AC3 spec. uint32_t fscod = mHeaderBuffer[4] >> 6; if (mDataType == SPDIF_DATA_TYPE_E_AC3) { mStreamType = mHeaderBuffer[2] >> 6; // strmtyp in spec mSubstreamID = (mHeaderBuffer[2] >> 3) & 0x07; // Frame size is explicit in EAC3. Paragraph E2.3.1.3 uint32_t frmsiz = ((mHeaderBuffer[2] & 0x07) << 8) + mHeaderBuffer[3]; mFrameSizeBytes = (frmsiz + 1) * sizeof(int16_t); uint32_t numblkscod = 3; // 6 blocks default if (fscod == 3) { uint32_t fscod2 = (mHeaderBuffer[4] >> 4) & 0x03; if (fscod2 >= AC3_NUM_SAMPLE_RATE_TABLE_ENTRIES) { ALOGW("Invalid EAC3 fscod2 = %d", fscod2); return false; } else { mSampleRate = kEAC3ReducedSampleRateTable[fscod2]; } } else { mSampleRate = kAC3SampleRateTable[fscod]; numblkscod = (mHeaderBuffer[4] >> 4) & 0x03; } mRateMultiplier = EAC3_RATE_MULTIPLIER; // per IEC 61973-3 Paragraph 5.3.3 // Don't send data burst until we have 6 blocks per substream. mAudioBlocksPerSyncFrame = kEAC3BlocksPerFrameTable[numblkscod]; // Keep track of how many audio blocks we have for each substream. // This should be safe because mSubstreamID is ANDed with 0x07 above. // And the array is allocated as [8]. if ((mStreamType == AC3_STREAM_TYPE_0) || (mStreamType == AC3_STREAM_TYPE_2)) { mSubstreamBlockCounts[mSubstreamID] += mAudioBlocksPerSyncFrame; } // Print enough so we can see all the substreams. ALOGD_IF((mFormatDumpCount < 3*8 ), "EAC3 mStreamType = %d, mSubstreamID = %d", mStreamType, mSubstreamID); } else { // regular AC3 // Extract sample rate and frame size from codes. uint32_t frmsizcod = mHeaderBuffer[4] & 0x3F; // frame size code if (fscod >= AC3_NUM_SAMPLE_RATE_TABLE_ENTRIES) { ALOGW("Invalid AC3 sampleRateCode = %d", fscod); return false; } else if (frmsizcod >= AC3_NUM_FRAME_SIZE_TABLE_ENTRIES) { ALOGW("Invalid AC3 frameSizeCode = %d", frmsizcod); return false; } else { mSampleRate = kAC3SampleRateTable[fscod]; mRateMultiplier = 1; mFrameSizeBytes = sizeof(uint16_t) * kAC3FrameSizeTable[frmsizcod][fscod]; } mAudioBlocksPerSyncFrame = 6; if (mFormat == AUDIO_FORMAT_E_AC3) { ALOGV("Its a Ac3 substream in EAC3 stream"); mStreamType = 2; mSubstreamID = 0; mSubstreamBlockCounts[0] += mAudioBlocksPerSyncFrame; mDataType = SPDIF_DATA_TYPE_E_AC3; mRateMultiplier = EAC3_RATE_MULTIPLIER; } } ALOGI_IF((mFormatDumpCount == 0), "AC3 frame rate = %d * %d, size = %zu, audioBlocksPerSyncFrame = %d", mSampleRate, mRateMultiplier, mFrameSizeBytes, mAudioBlocksPerSyncFrame); mFormatDumpCount++; return true; } } // namespace android